A60: Failed to start XP

Someone at - it any idea how I can get my a60 to get to the XP screen, it was ok until I installed some spyware software anti but when I tried to restart it gets stuck in a cycle of crashes and then again and then crashes. What I'm trying to avoid using the files system disk

HI Shane,

Try to start your notebook computer in mode 'safe '. You can then uninstall one / software v you have installed.

To begin the 'safe' mode just press on and hold the F8 key when you turn on until you hear a series of beeps. Then select the 'safe' mode in the menu.

HTH

Tags: Toshiba

Similar Questions

  • the application has failed to start because its side by side configuration is incorrect

    I downloaded the new firefox and when I try to open it I get this message that the application has failed to start because its side by side configuration is incorrect

    Seems to be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side).

    You can try to use the sxstrace tool to see if you can find which files are missing or damaged.

  • Satellite Pro A60 - does not start

    My A60 will not start. The power supply is plugged with a green light on the power supply and the A60. The battery is full (light began in orange and is now green). Nothing happens when you press the power button.

    Tried to take the battery out and running on AC, but no change.

    Any ideas?

    Thank you
    L

    HI Laurent,.

    Try to remove the battery and also diconnecting the AC power for a few minutes. Then re-install the battery and try to turn on the unit. If this does not work, then remove the battery and plug in the AC power. Again try to power on the device.

    If none of the above works then you will need to refer to a Service partner authorized to have the laptop checked.

    Kind regards

  • Tecra A9 fails to start because of system file is missing

    Hello
    I bought tecra 1 month and now I can't open my laptop

    It has windows xp pre installed and fails to start windows
    because the file system is missing.
    What can I do?
    I don't have a floppy drive to insert the startup disk
    Help, please!

    Hello

    Why you need a floppy disk?
    As far as I know this laptop has an internal CD/DVD drive.
    I think you simply boot from the Toshiba Recovery CD and must be reinstalled the operating system!

    If all goes well it s not a serious fault because sometimes this seems due to HARD drive failure.
    But like I said above usually the new installation of operating system restore CD for this problem

    Good luck

  • Re: Satellite A300 sometimes fails to start

    My Satellite A300 sometimes fails on start when displaying a logo of Toshiba.
    I don't know why. Y at - it a touch to show a p.o.s.t. tests?

    Sorry for my English.

    Hello

    You can change in the BIOS the option to boot from normal to fast.
    I think that this will disable the Red Toshiba log and show you the post screen.
    But to be honest, I don't know if this could be help full.
    In any case, if the laptop is unable to pass on the MESSAGE, something might be wrong on the motherboard; the modules, memory example or similar

  • Satellite A500 fails to start

    Hello

    Once in a while (almost once a day), my A500 fails to start.
    When I hit the power button, weird lines appear on the screen immediately, and it seems that there is not a lot of power goes to the processor.
    It will stay like that until I hit the power button to stop it.

    http://img52.imageshack.us/img52/5418/20112010747.jpg

    It seems to start fine if I leave for an arbitrary amount of time before trying again.

    Any thoughts?

    See you soon.

    HM. For me, it looks a bit like a motherboard maybe hardware problem or GPU.
    You are able to access the BIOS?
    Please try this and set the default BIOS.
    In addition, I would recommend setting the notebook back to factory settings to check if an improvement is noticeable.

    But if his equipment really then issues you should get in touch with a local ASP you know

  • HAB check failed for start / could not validate the boot image

    Hello

    I have neglected my E bike for a few weeks and when I loaded and it fed today, it shows a menu and:

    HAB check failed to start

    could not validate the boot image

    Tried all the menu items and none of them worked. For me, it's very odd behavior, because BONE is not affected since the last Android 5 update, several months ago.

    Are there opportunities for the device?

    If you can't make an external reset via hardware buttons, then your phone will have to service.

  • Satellite P100: HARD drive sometimes fails to start or just not responding

    I have a satellite P100 on xp professional service pack 2. Sometimes it fails to start and appears as if the hard drive just stopped responding, does not require defragmentation.

    Checked all Diagnostics pass, can get it started by selecting the boot options multiple F12, HDD that appears first in the list.

    Although it seems not take a long time.
    Sometimes it seems to stall at the start to the top but picks up then after a few minutes and fortunately sometimes it starts without a problem.

    What is data corrupted in the bios? but then why it starts ok sometimes and not others? It doesn't matter if it's hot or cold.

    any ideas or help greatly received.
    David

    Post edited by: daviddean

    Hello David

    It's a very strange situation, and for me there is no explanation simply. In my opinion the laptop or HARD drive, the functionality must be tested properly. Here in the forum we can speculate just what is the problem here but mobile startup must be tested with the other HARD drive pre-installed with original recovery image.

    It will be interesting to know if the problem disappeared with new HARD drive. So what you can do now? If possible, try to get the second HARD drive and do the only testicles or make a call to the authorized service center and explain the situation. If the laptop is guaranteed to be valid, it will be better to check in service because they can replace free HARD drive (if the HARD disk is defective).

    Sorry, but I don't see another solution. Some test with the new HARD drive can help you to understand if this happens because of the HARD drive. I don't think that the BIOS can be responsible for the issue described.

  • Failed to start the test

    I have a hp pavilion g7, Windows 7

    Starting tonight, my laptop fails to start and freezes on the "getting started" page view. After several of the recommended options, I ran the test that does not start.

    The display screen reads-
    Memory test: past
    Smart check: past
    Dst short: failure

    Failure ID: GU6E00 - 63479 L-MFPX01-60TP03
    Product ID: A7A44UANBA

    Hard drive 1

    Starting test: failed

    Where should I go here for this problem?

    Hello

    Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also compatible with startup problems you describe.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and you want a guide on replacing the hard drive you, please let me know...

    Kind regards

    DP - K

  • DSC error: IAK_SHARED failed to start the service

    When I try to deploy a shared variable library, she fails to deploy and gives me the following message: error:-1967362042, IAK_SHARED: (Hex 0x8ABC7006) failed to start the service.  I'm using LabVIEW 8.6 with DSC 8.6.  I tried to run one of the examples (the example of the heat exchanger).  Any ideas?  I have LabVIEW 8.5 installed as well (many of my clients are still using it), and I got 8.5 installed DSC.  Shall 8.5 DSC be uninstalled everything first?

    Thank you

    Tom

    Hi Tom,

    This means that your installation is corrupted and some components SQL do not settle down with it. I would advise to uninstall completely and then put it back using the installation CD you have. I hope this helps.

    Gregory C.

  • Windows Update fails because TrustedInstaller fails to start due to bad road cbscore.dll

    I get error 80080005 when you try to run windows update.  I followed this to the fact that the Windows Module Installer fails to start.  Using ProcMon I could find this TrustedInstaller.exe fails to start.  It is a failure due to the following:

    TrustedInstaller.exe QueryOpen C:\Windows\servicing\0.0.0.1\cbscore.dll IO QUICK REJECTED
    TrustedInstaller.exe CreateFile C:\Windows\servicing\0.0.0.1\cbscore.dll path ACCESS not FOUND
    TrustedInstaller.exe QueryOpen C:\Windows\servicing\0.0.0.1\cbscore.dll IO QUICK REJECTED
    TrustedInstaller.exe CreateFile C:\Windows\servicing\0.0.0.1\cbscore.dll path ACCESS not FOUND

    I searched and cbscore.dll is actually under:

    C:\Windows\winsxs\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_0b4ada54c46c45b0

    I tried to understand where TrustedInstaller.exe gets the path for cbscore.dll, but I had no chance.  Can someone tell me where TrustedInstaller.exe gets this way?  Or, more generally, how can I solve this problem?

    Thank you!

    The McAfee free trial (which is preinstalled on the computer when you bought it) expires before you've bought & installed McAfee Security Center?

    Installed Updates lists the the system update tool... (KB947821)?

    I'm afraid things only left in my neck are (1) performs a thorough check of malware, (2) do a repair installation of Vista or (3) formatting the HARD drive & doing a new installation of Vista. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Error: "the application failed to start because its side by side configuration is incorrect."

    Original title: youcam /camera fun zone

    How can I solve the problem / the application has failed to start because its side by side configuration is incorrect is the message that is displayed

    [Moved from comments]

    Hello

    Thanks for posting your question on the Forums of community of Microsoft.

    1. don't you make changes to the computer before the show?

    2. which version of the operating system is installed on the computer?

    3. when exactly you get this error message?

    You can uninstall all existing Microsoft Visual C++ Redistributable Package on the system and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.

    Uninstall existing Microsoft Visual C++ Redistributable Package

    Reference:

    http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

    To reinstall the latest Microsoft Visual C++ 2010 Redistributable Package

    Reference:

    Microsoft
    Package redistributable Visual C++ 2010 (x 86)
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

    Microsoft
    Package redistributable Visual C++ 2010 (x 64)
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

    Hope this solves the problem.

  • Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

    Original title:

    Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

    Hello
    1. what version of Windows is installed on the computer?
    2. are you aware of any changes made to the computer, before the show?
    Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

    Method 1:

    Step 1: Perform a boot minimum troubleshooting and check which application reports this error
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

    Step 2: reinstall the application.
    Uninstall or change a program
    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    Method 2:
    Run an analysis of auditor of system files on your computer and check for the issue.
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    I hope this helps.

  • Error - the application failed to start because its configuration side by side is not correct when you use Microsoft Safety Scanner

    Original title: microsoft security scanner is Guy accounts.

    It shows the following error - the application has failed to start because its side by side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. can u please help?

    Hello

    You can uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.

    Method 1:

    Step 1: To uninstall the package:

    a. open programs and features.

    b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

    c. click on uninstall at the top of the list.

    Step 2: Download and install the latest package and see if it helps.

    Before you download, you can check am I running the 32-bit version or 64-bit Windows?

    For 32 bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 86)

    For 64-bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 64)

    Method 2:

    You can try to perform a clean boot and check if it helps.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    In addition, after you fix the problem, you can see step 7 above to restore your computer to a Normal startup mode.

  • the application has failed to start because its side-by-side configuration is incorrect for windows live messenger

    Wen I Conect live windows Messenger tray I have this massege and I can't conect to the programe

    the application has failed to start because its side-by-side configuration is incorrect

    Hello Pecky,

    Thanks for visiting the site of the community of Microsoft Windows. The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live Solution Center Messenger Portal community. Please visit the link below to find a community that will support what ask you:

    http://windowslivehelp.com/product.aspx?ProductID=2

    Thank you

Maybe you are looking for

  • Satellite P10-831 wireless card

    Hello!I bought my Satellite P10 831, a year and I was very happy about it. But then I tried to use my wireless card (it is an Atheros I believe)...The problem is that my computer can't even find the card. In the unit where everything is listed there

  • Equium A60 - 181 Win XP: card incorrect RLAN - icon notification taskbar

    Hello world Ive took my Equium A60-181 for quite a while now and its been fairly reliable, sound always connected via WiFi to my home network. Very recently, however, the icon in the tray system for network connectivity was incorrect. He said always

  • Lexicon Alpha and Skype does not?

    Hey guys,. I have a card audio Ricio lexicon and a microphone, but does not work with Skype. My heart of duel pro Mac is to see the microphone in the setting as well as the definition of Skype but no sound don't seem to pikeup in Skype compare to the

  • Huawei mobile connect-Device Enumerate Bus error

    Dear Sir. I cannot connect dongle for laptop, as shown in Device Manager alet and cannot instrall on drivers also. Pls help to slove this problem. my laptop product number-B3K23PA #ABG Hardware ID PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C & REV_01PCI

  • brightness / screen problems

    Hi all, I currently have the kind of trouble with the help of my new sansa 8 GB. First time when I got the stuff out of the box everything was fine, don't remember exactly the version of the firmware, but the device worked well. I've updated the firm