A60, USB, network - the Bermuda triangle?

Similar Questions

• Network WRT610N shares lost in the Bermuda triangle

  I did a search and could not find a solution, so I won't have to raise this issue (probably again)?

  I just got a WRT610nv2 (with the latest firmware) until I had a WRT600n who gave up the ghost last week (turn signals, unable to maintain a connection).

  My previous router has been able to recognize actions (6 WD myworldbook NASs - 4 double rings and 2 white lights - on a linksys switch) and they automatically appeared under the WORKING Group on XP and on a macbook 2008 under snow leopard.

  The WRT610nv2 does not only. I was able to map drives in XP and connect that way, but it's DOA on mac.

  Interesting, however, I am able not to call servers in PLEX (XBMC for mac), no problem using their names (SUSHI1, SUSHI2, etc.) and not their IP addresses and the administration of web application on the router itself is also able to list the ip addresses and names of these drives as well.

  On the router configuration page, click the storage tab and subtab then, Administration... Now, in the Workgroup box... use the same workgroup that you use on the computer. Now try...

• Question about the use of with Satellite A200-10W USB network card

  Can I possibly use a wireless-G USB network adapt to my Satellite A200-10W [with Wi - Fi Finder]? Pls advise. Thank you.

  Hello

  Why not? Surely, you can use this stick with your machine. Just put em in a USB slot, install the drivers and then let go! :)

  If you have any other questions, then just ask.

  See you soon

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Different segment of the USB network server error

  Running Windows Home 7, with a wired USB (SOHO) server when connected, he says 'Different Segment of USB network server' how can I solve this problem?

  Concerning

  Hi David,

  Thanks for the update on the issue.

  If the problem persists, try these methods below and see if that solved the problem.

  Method 1:

  There may be several reasons why a computer is not able to detect a signal wireless adapter. Wireless networks appear only if your PC has a wireless network card installed, the adapter is turned on and the wireless access point is within reach. Many network connection problems are caused by hardware that is not configured or the drivers are not installed properly. Follow the steps described in the article below to check on all aspects and troubleshoot accordingly.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Keep us.

  Kind regards

• Explorer displays unknown USB on the network in the Explorer tab - but no USB in the computer

  In Explorer windows on the network tab, there are 2 devices posted - one is my computer and another is a device called "DD - WRT 3FFA33. When I click on it, there is a folder named "usb" (in the right pane under the word usb, it says 'share' in gray lettering). When I click on the "usb" folder, I get a message

  "Windows can not access \\Dd-wrt 3ffa33\usb be"

  Check the spelling of the name. Otherwise, there could be a problem with

  your network. To try to identify and resolve network problems, click

  diagnose.

  I cannot uninstall or remove this device and can not solve a network problem.

  Can someone tell me what it is and how get rid of it if it is not necessary or something else as spyware?

  Thank you in advance.

  Is the USB port on your router. It needs software to work, but the USB ports on the routers are spectacularly useless for anything and in some cases partially are dumbed down by the provider of the router.

  If you let be, you get no error messages... :-)

• A key using self-powered USB causes the base station go "off-line".

  I found that by using a USB drive self-powered, as the WD My Passport, without a USB powered, hub attached to the base of the station USB port has caused the base station go "off-line". In fact, using a powered hub does not always remedy the situation, but it is more reproducible without one.

  This is true for the AirPort Extreme and Time Capsule 802.11ac. The problem does not occur immediately, but it may happen over several days. The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  My question is if others have had the same results? ... and did you find permanent solutions?

  

  USB key "seems" less reliable on the airports of AC model than on previous versions.

  I tend to not use USB attached to routers because I think it's convenient mediocre and poor speeds. But I tested with previous models, and it seems ok...

  KT those a few posts here a me trial there. These are not self powered readers... who I have long recommended people avoid the use (without a powered hub)...

  Re: External backup drive down regularly

  In fact, the wire is different from what I remember... Age don't you know.

  But I did the test on an AC TC. The result has been very reliable. He did not cause the TC to close... but I lost the connection of the USB almost every day... except for a trial where I kept the USB drive mounted in the Finder... so that the USB drive wouldn't turn it down. He then worked for a few weeks... until what the noise of rotation of disk (sitting next to me) drove me crazy... as soon as he was mounted is more, he would pass the same existence as before.

  The previous model TC was barely big enough for the internal use of the power supply units. So powered car running disc was impossible.

  Provide EI (GEN 1-5) at 1. 8A and 12v was adequate, but the standard USB port is estimated at 500 my wrong to manage disks free power.

  You would certainly think AC 12v 5A power supply models would have a lot of power. Yet, power problems are a major problem still. Supply is extremely sensitive and stop easily for reasons I'm still to understand.

  Where the long threads on power issues to the AE.

  Now, I'm going to speculate... I think that SOME problems are associated with power.

  What is the USB port side in airports of AC? Is it still 500ma? Apple never seem to give easy to find info on these details.

  Do you know? I haven't measured it, but I can try timing the time it takes to charge a phone.  Assuming that it will immediately trigger.

  Then he will have problems with a self-powered drive. Even if the drive has less energy than quotes, current during starting is much higher. The restriction of the power on the USB port is managed by a self regulator recovery... Once you triggered it, you must stop the power... then reboot the machine to restore power.

  Then, I also did the test with hub powered... and like your results... It was better. Longer time between the drive disappears from the network. But it was not enough to stop it.

  There is another interesting effect using self-powered hubs... I discovered this on a computer running Mac OS lets say! The computer would not start with a powered hub connected to the front USB. Hubs self-powered cheap, showing a defect in their design. They can refer to the USB port. In this computer, it was enough to stumble on the good power circuit and prevent the supply, commissioning... As long as the computer is running, everything was fine... but if I turned off it would not start. I finally woke up I had to exit the USB every time. At one point, I made a "special" Cup USB cable 5v line so the hub can stay connected. You can probably just to isolate the 5v of contact in the USB. Regardless of the configuration of power USB in the AE or TC is as you can assume she's sensitive enough... and at any time when the 5V on USB hub exceeds the 5V in AE it could trigger.

  The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  Endangered of AU base station is not uncommon.

  It responds to the pings? I guess he still has lights but is he blocked? You still get internet through it?

  Try to open it manually in to THE... use of the file / configure from others and put the IP address of EI.

  Talk with me by e-mail... It is open in the profile.

• OfficeJet Pro 8500 a: 8500 a plug the USB to the PC and wireless for Mac

  Our Officejet Pro 8500 a is connected via USB to our HP Pavilion running Windows 7. This connection works well. However, I tried to connect my iMac (OS 10.10.2) to the wireless printer with no success. If I disconnect the USB from the PC, I can connect wirelessly from my Mac. My question is: the Officejet Pro 8500 a does support multiple types of connections - one by USB and the other by wireless? If so, then I would appreciate help to understand why my Mac is not the 8500.

  Other details: our wireless router is Apple Airport Extreme. The wireless connection on the printer seems to work (I can print the details of this connection). However, when I try to add the 8500 to the Mac by using add printer, the printer does not appear. (The printer is lit and shows five bars of signal strength, SSID is correct and a valid IP address).

  My Mac is connected to the wireless network.

  Any suggestions?

  I was able to solve the problem of the printer with ethernet connection to the router that provides network wireless for PC and Mac. Now two machines are able to access the printer with no problems. By connecting with an ethernet cable, connect the printer wireless has been disabled. It had to be done because the wireless radio had become unreliable. The idea was that the blue wireless light never came. Thus by connecting wired LAN, all problems are gone. Thanks to the team of Geed for help.

• HP Mini 200-4200 doesn´t give USB in the Start Menu

  Hello!

  I have: HP Mini 200-4200, pr B3R47EA #ABU nr. Hard drive died, received a new one and I've been waitng for the upcoming USB info. I just got my USB with the news of recovery on it in time. (Recovery USB key is - 685741-034)

  I followed the instructions, but in the Start Menu of Options, he didn t give me an external drive. He gave me 3 options - hard drive for HP laptop, network adapter.

  I didn t know what to do, and the thought I´d go out of the system and ask for advice here. Press Esc. He then continued in the Recovery Manager. So I thought, Whew!, it'll work. Now however, he got stuck for about 3 hours (he can´t think as long?) in the present:

  "Recovery image factory preparations."

  Did you receive any additional disk supplied with the system recovery media? If so, insert it now; otherwise, click on ignore.

  Please wait. »

  The USB stick has been inserted all this time. Now, after 3 h in the same screen, I got him out for a second and put it back, no change.

  Current today?

  (should I press the 'skip' button?)

  SOS!

  ::::::::::::::::::::::::::

  While waiting for a response, I stopped the mini and returned to the BIOS (no idea what I m done - but in some post, someone said they changed their boot order... went to look for that)

  In the Conf system boot order appears like this: hard drive for laptop, USB floppy on say hard Key/Usb, CD-ROM Usb CD/dvd drive! USB floppy (with an exclamation point!) and network card. In the Boot Options startup disk has been disabled... I activated it. just in case... no idea what it means. After this USB doesn´t floppy have a "!" in this topic.

  Should I change here something to conditioned USB option? The order?

  I turned on my mini 3 times with the USB key in one of the 3 locations every time... it s do not know a good idea, but it's just doesn´t give me the option of Start Menu...?

  Now with everything enabled in the boot order... doesn´t still come as an option.

  :::::::::::::::

  People also speak of traditional can´t find anywhere in the BIOS to change any setting?

  ::::::::::::::::

  Oh and when I pop the USB in a location to another computer, it starts to read... but I m too ignorant and afraid to see that then happens, so I just took new.

  Start by using the option for "floppy USB disk hard key/Usb. This should return you to the same place as before. If it is not, disable booting to USB floppy option and try again. Since you did not receive an "additional disk" with your USB recovery media (and even if you did, you could not use it unless you have a USB CD/DVD drive), you'll want to press 'SKIP' when prompted. Then, just follow the prompts as required and eventualy Windows will be installed.

  Good luck and after back if you encounter other problems.

  Please send Bravo

• After you have saved the system at an earlier date, program asks a CD/DVD/USB for the reader to conintue

  Original title: MY COMPUTER to a DATE PRIMITIVE WAS BACK UP. IS COME FACE-TO-FACE, A PROGRAM NEEDS A CD/DVD OR USB FOR THE READER TO CONTINUE. HOW CAN I CANCEL THIS MPROCEDURE?

  wanted to back up my computer far earlier. I used the wrong program. It forces me to intall a usb cd/dvdr for the reader to continue. It was a mistake. so now I get a message to do so. How can I cancel this pricedure?

  Hello

  What version of Windows are you using?

  I suggest you try this method, if you have Windows 7.

  Method 1:

  Restart the computer in last good known Configuration.

  Using the last good known Configuration.

  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Method 2:

  If you are unable to start your computer in last good known Configuration. Start the computer in safe mode and restore to a point where the computer was in a State before starting the backup.

  Step 1:

  Start your computer in safe mode with network and check the status of the issue.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  The restore of the system in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System Restore: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

• problem with the yellow triangle without preventing Internet access

  problem with the yellow triangle without preventing Internet access.in across the network!
  all PC go to the internet through TMG and some computers work very well and most of the computers triangle shows yellow and always go online, but the connection it needs to slow down, I do everything from restarting all switches and install new TMG and always exist and place on another line to outside the firewall problem disappear?
  What can I do :(

  Hello
  I advise you to follow the link below for Tech Net where your social networking question will be answered by IT pros.
  You can post/search here
  hope this helps,
  B Eddie

• HP 15-r001nc: controller and USB network controller

  Hello. I reinstalled my OS to Windows 7 and I need the software for my laptop HP 15-r001nC: controller and USB network controller. Thank you

  Hi, I am in the process to recover my computer after losing the hard disk. Pavillion DV6 1030US. I installed a 500 GB SSHD and I'm having issues after using my original Vista SP2 64-bit software. In Device Manager, I have (?) in other devices. Following your disposal advise here is the information found in the hardware ID:

  PCI\VEN_8086 & DEV_4237 & SUBSYS_12118086 & REV_00

  PCI\VEN_8086 & DEV_4237 & SUSBSYS_12118086

  PCI\VEN_8086 & DEV4237 & CC_028000

  PCI\VEN_8086 & DEV4237 & CC_0280

• Share USB over the internet using the E3000

  I just bought an E3000 router, everything started installation and configuration USB share for my network. But how to share this USB on the Internet with the family etc. ??? I keep searching and searching and just can't find the answer. It's the ONLY reason I bought this specific model.

  You are able to share the drive within the network?

  Open the router configuration page and go to storage tab, click Activate the FTP server FTP server void tab and enable access to the Internet.

  Now, go to the status tab and check the IP address of the Internet on the status page. Note the Internet IP address. Consider the Internet IP address X.X.X.X. . Open the Internet browser and in the address bar, type ftp://X.X.X.X .

• iPhone 5 c will not charge via USB on the laptop?

  Hi all.

  I have an iPhone 5 c and as about a week ago, does not charge via the USB port on my laptop. He sees very well in my wall sockets and Sockets USB as well, but not in my laptop. I have an Acer laptop running Windows 7. Windows is up to date, iTunes has the latest version installed. Whenever I plug in my phone, one of the following conditions occurs:

  (1) does not have

  (2) noise "plugged" USB lights, the window on the lower right, tell that a USB device has malfunctioned

  (3) (rarely) of phone calls after I tried several things

  What happened is I would plug my phone, she would charge via USB, iTunes opens automatically, and "trust to this computer" popup would come on my phone if I had unlocked it. None of this is happening now. I did the following to try to remedy:

  (1) power cord iPhone replaced (it was time for a new anyway)

  (2) uninstalled and reinstalled iTunes

  (3) restart computer and phone probably 29856 times

  (4) device Manager... nothing comes up at all, not even the unknown device. RARELY the unknown device comes up, then I get a "Code 10: this device cannot start" error, but it is * in a handbasket just trying to get to THIS point! and IF I do what they say to do to correct a code 10 (uninstall all USB and restart the computer, then USB devices hook to the top one at a time), so I'm now at my problem of a communication that don't meet pluse between my phone and PC

  5) tried to the registry editor, but not "upper filters" option rises

  (6) virtually every other option on this thread of 5 pages iphone not recognized by Windows 7

  Help, please?

  The USB port of your laptop does not provide sufficient power to recharge the phone. It is a hardware problem with your laptop, not the phone.

• Having trouble getting rid of the red triangle...

  Expert guys, please help me...

  I've been looking for the solution, but I could not find.

  I made a simple worksheet with simple calculations, but insists a 'wild' red triangle by not going not far from saying that "numbers can be divided by zero. But my problem is that I do not have the numbers to be placed in the cells again. I am planning a cost for my small store journal. Is there not an OU "IF" formula, a formula of "conditioning" that prevents the red triangle to appear?

  Thanks in advance.

  Assuming that it resembles your situation:

  

  D2 = B2÷C2

  that occurs because and empty cell will return zero

  You can solve this by:

  (1) ignore OR

  (2) use the formula

  = SIERREUR (B2÷C2, "")

  OR

  (3) use the formula

  If (C2 = 0, "", B2÷C2)