"aapt file not found" Exception during deployment on the Android emulator

Similar Questions

• Cannot install paintnet 3.5. It gives an error "system of e/s file not found exceptions could not load file."

  Original title: uninstalled paintnet3.5 now impossible to reinstall download

  "downloaded the file and open it to install gives this error :-systemi/o file not found exceptions could not load file or Assembly of base of the version3.0.0.0 culture = neutral public key token = 31bf3856ad364e35' or one of its dependencies, the system cannot find specified file base name of the 3.0.0.0 - batch version of gibberish between - then" AVT Assembly binding logging is disabled to allow to link failure check the registry value (hklm\software\microsoft\fusion\enablelog (c word) 1 IAM onwindows vista service pack2 version6 and ihavent a clue unless something has been lost in my recent wave of attacks of malware bullguard - computer reports now clean-i do not know how to access the files of basic trends are not listed as installed programs

  Hi Bernie, 78,.
   
  I suggest that you follow these steps and check if it helps.
   
  Step 1:
   
  Right-click on the setup.exe file and run as administrator and check.
   
  Step 2:
   
  I suggest that make you the SFC scan on your machine like a system file is damaged or missing. Scan SFC repairs and tries to retrieve system files.
   
  Step 3:
   
  I am not quite sure if the malware is flushed out of your system. I wish that you run a scan complete of your security again software or run a line scan using the link below.
  http://www.Microsoft.com/security/malwareremove/default.aspx
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Deployment where to deploy on the Android emulator error

  Hi all
  
  I encounter a problem when you try to deploy the Mobile application of the ADF in the Android emulator.
  I followed the tutorial steps in this link. [Tutorial Mobile ADF | http://docs.oracle.com/cd/E18941_01/tutorials/BuildingMobileApps/ADFMobileTutorial_1.html]
  Can someone please help give advice on this subject?
  
  FYI, I use JDeveloper Studio 11.1.2.3.0 and Android 4.2 (API, 17).
  
  
  
  [12: 31:39] run command line: ["C:\Android\adt-bundle-windows-x86_64\sdk\platform-tools\dx.bat", dex, debug, Dungeon-classes, output = 'Tutorial Mobile C:\JDeveloper\mywork\ADF 1\deploy\ANDROID_MOBILE_NATIVE_Debug\classes.dex', 1\deploy\ANDROID_MOBILE_NATIVE_Debug\classes Mobile C:\JDeveloper\mywork\ADF Mobile C:\JDeveloper\mywork\ADF 1\deploy\ANDROID_MOBILE_NATIVE_Debug\framework\build\jar\AND_ksoap.jar 1\deploy\ANDROID_MOBILE_NATIVE_Debug\framework\build\jar\Container.jar C:\JDeveloper\mywork\ADF Mobile C:\JDeveloper\mywork\ADF tutorial tutorial Tutorial] Mobile 1\deploy\ANDROID_MOBILE_NATIVE_Debug\framework\build\jar\IDMMobileSDK.jar tutorial, C:\JDeveloper\mywork\ADF Mobile 1\deploy\ANDROID_MOBILE_NATIVE_Debug\framework\build\jar\logging_dalvik_release.jar tutorial, C:\JDeveloper\mywork\ADF Mobile Tutorial 1\deploy\ANDROID_MOBILE_NATIVE_Debug\framework\build\jar\phonegap.jar C:\JDeveloper\mywork\ADF Mobile 1\deploy\ANDROID_MOBILE_NATIVE_Debug\framework\build\jar\vmchannel_dalvik_release.jar tutorial]
  [12: 31:39] output extension unknown: C:\JDeveloper\mywork\ADF
  [12: 31:39] use:
  [12: 31:39] dx - dex [-debug] [-verbose] [-posts = < style >] [-no - locals]
  [12: 31:39] [--no - optimize] [-statistics] [-[no] optimize-list = < file >] [- no - strict]
  [12: 31:39] [-keep-classes] [-output = < file >] [- dump - to = < file >] [-dump-width = < n >]
  [12: 31:39] [-dump-method = < name > [*]] [-verbose-dump] [- none - files] [-core-library]
  [12: 31:39] [-num-threads = < n >] [-extra] [-force-jumbo]
  [12: 31:39] [< file > .class | < file >.] {zip, jar, apk} | < Directory >]...
  [12: 31:39] convert a set of classfiles in a dex file, possibly integrated into one
  [12: 31:39] jar/zip code. Release name must end with one of: .dex .apk .zip .jar. Positions
  [12: 31:39] options: none, important, lines.
  [12: 31:39] dx annotool annotation = < class > [-= element < element types >]
  [12: 31:39] [-print = < printing >]
  [12: 31:39] dx - dump [-debug] [-strict] [-bytes] [-optimize]
  [12: 31:39] [-basic-blocks:-rop-blocks |-ssa-blocks |-dot] [-ssa-step = < step >]
  [12: 31:39] [-width = < n >] [< file > .class | < file > .txt]...
  [12: 31:39] bucket tilting classfiles, or transformations, in a human type format.
  [12: 31:39] dx - find-uses < file.dex > < statement type > < member >
  [12: 31:39] find the references and declarations of a field or a method.
  [12: 31:39] declaration type: a class name in the internal form, as Ljava/lang/object;
  [12: 31:39] member: a field name or a method such as the hash code
  [12: 31:39] dx-J < option >... < arguments, in one of the above forms >
  [12: 31:39] pass specific options to the virtual machine to the virtual machine that is running dx.
  [12: 31:39] dx - version
  [12: 31:39] print the version of this tool (1.7).
  [12: 31:39] dx - help
  [12: 31:39] print this message.
  [12: 31:39] command-line execution failed (return code: 1).
  [12: 31:39] run command line: 'C:\Android\adt-bundle-windows-x86_64\sdk\platform-tools\dx.bat' dex debug output Dungeon-classes = 'Tutorial Mobile C:\JDeveloper\mywork\ADF 1\deploy\ANDROID_MOBILE_NATIVE_Debug\classes.dex' C:\JDeveloper\mywork\ADF Mobile Tutorial 1\deploy\ANDROID_MOBILE_NATIVE_Debug\classes C:\JDeveloper\mywork\ADF Mobile Tutorial 1\deploy\ANDROID_MOBILE_NATIVE_Debug\framework\build\jar\AND_ksoap.jar C:\JDeveloper\mywork\ADF Mobile Tutorial 1\deploy\ANDROID_MOBILE_NATIVE_Debug\framework\build\jar\Container.jar C:\JDeveloper\mywork\ADF Mobile tutorial 1\deploy\ ANDROID_MOBILE_NATIVE_Debug\framework\build\jar\IDMMobileSDK.jar C:\JDeveloper\mywork\ADF 1\deploy\ANDROID_MOBILE_NATIVE_Debug\framework\build\jar\logging_dalvik_release.jar Mobile C:\JDeveloper\mywork\ADF Mobile 1\deploy\ANDROID_MOBILE_NATIVE_Debug\framework\build\jar\phonegap.jar C:\JDeveloper\mywork\ADF Mobile 1\deploy\ANDROID_MOBILE_NATIVE_Debug\framework\build\jar\vmchannel_dalvik_release.jar tutorial Tutorial tutorial
  [12: 31:39] Server Android Debug bridge closure...
  * [12: 31:39] deployment cancelled.*
  * [12: 31:39] - incomplete deployment. *
  * [12: 31:39] deployment failed due to one or more errors returned by "C:\Android\adt-bundle-windows-x86_64\sdk\platform-tools\dx.bat". What follows is a summary of the error returned (s) :*
  Command-line execution failed (return code: 1).

  Looks like you have spaces in the path where you created your Mobile ADF workspace:

  C:\JDeveloper\mywork\ADF Mobile Tutorial 1

  I suggest that is to run the command turned off. Close JDev, remove spaces, reopen JDev then the workspace. Try again.

  DMI

• Class not found error during deployment

  Hello
  
  I'm running on jboss 4.0.3 SP1-, IOM 9.0.3 latest patch. I'm new to this implementation and rebuilt entire dev environment. I check the provision of resources and ran in a class not found error.
  
  The error that says:
  2011-10-19 10:23:17, 111 DEBUG [XELLERATE. ADAPTERS] class/method: tcADPClassLoader/FindClass entered from.
  2011-10-19 10:23:17, 111 DEBUG [XELLERATE. ADAPTERS] class/method: tcADPClassLoader:findClass - data: loading class - value: com.jscape.inet.ssh.SshException
  2011-10-19 10:23:17, ERROR 112 [XELLERATE. SERVER] error encountered in the com.thortech.xl.dataobj.tcScheduleItem data object save
  2011-10-19 10:23:17, ERROR 112 [XELLERATE. Class/method SERVER]: tcDataObj/save some problems: com/jscape/inet/ssh/SshException
  Java.lang. * NoClassDefFoundError *: com/jscape/inet/ssh/SshException
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:164)
  at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpFAPROVISIONING.implementation(*adpFAPROVISIONING.java:92*)
  at com.thortech.xl.client.events.tcBaseEvent.run (unknown Source)
  at com.thortech.xl.dataobj.tcDataObj.runEvent (unknown Source)
  at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent (unknown Source)
  
  XXXXXXXXXXXXX
  When I watched the process task named "Supply of FA", line 92, I see this reference:
  
  90:
  91: //Initialize persistent object 'INIT '.
  92: clsINIT = Class.forName("*com.cpsg_inc.oim.unix.SSHCommandExecutor*");
  93: maoConstructorArgs = new Object [] {};
  94: masConParamTypes is new class [] {};.
  95: moCons = clsINIT.getConstructor (masConParamTypes);
  96: INITconsObj = moCons.newInstance (maoConstructorArgs);
  
  XXXXXXXXXXX
  When I open the task of the adapter named iNIT connection (this is the first task of the task of Provisioning of FA adapter process), Source of the API: JavaTaskJar:cpsgUnix.jar
  The application API: com.cpsg_inc.oim.unix.SSHCommandExecutor
  Manufacturers: 0 com.cpsg_inc.oim.unix.SSHCommandExecutor (public)
  Methods: 9 public Sub com.thortech.xl.integration.tenetssh.helper.SSHPrvosioning.SSHInit (...)
  
  xxxxxxxxxxxx
  Then I made sure that the named cpsgUnix.jar jar file is present in the OIM_HOME/JavaTasks directory.
  
  But I still have the error.
  
  What Miss me?
  
  Thank you
  
  Khanh

  Have you pasted sshfactory.jar?

• Get the file not found exception to the server managed

  Hello
  
  Working on jdev 11.1.1.3.0, ADF BC with Rich faces.
  
  I download the file from the network file system, I am successfully the integrated download weblogic Server file, the application even when I'm running with my managed server (DEV server), I get the error message like
  
  # < 10 August 2010 23:39:02 CEST > < opinion > < Stdout > < sunt2000 - 10.wfs.com > < wld1_ms1 > < ExecuteThread [ASSET]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > < 21291a4e37aed913:-38a2f9a1:12a5d38d756: - 8000-0000000000000275 > < 1281476342286 > < BEA-000000 > < downloadLetters file name*://bwi-wfp-v01/Apps/SCII/TEST/LOG/Cards/ONDEMAND/Xyz.doc* >
  # < 10 August 2010 23:39:02 CEST > < opinion > < Stdout > < sunt2000 - 10.wfs.com > < wld1_ms1 > < ExecuteThread [ASSET]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > < 21291a4e37aed913:-38a2f9a1:12a5d38d756: - 8000-0000000000000276 > < 1281476342313 > < BEA-000000 > < < 10 August 2010 23:39:02 CEST > < WARNING > < org.apache.myfaces.trinidadinternal.taglib.listener.FileDownloadActionListener > < BEA-000000 > <
  javax.el.ELException: java.io.FileNotFoundException: */bwi-wfp-v01/Apps/SCII/TEST/LOG/Cards/ONDEMAND/Xyz.doc* (no such file or directory)
  at com.sun.el.parser.AstValue.invoke(AstValue.java:161)
  
  my file location is://bwi-wfp-v01/Apps/SCII/TEST/LOG/Cards/ONDEMAND/Xyz.doc, I am getting the correct location of the file during playback in the managed bean, but the error is showing that /bwi-wfp-v01/Apps/SCII/TEST/LOG/Cards/ONDEMAND/Xyz.doc one / is missing, why what is happening in the managed server.
  
  Can someone help me, what is in this case.

  What comes to mind, is that the managed server is unable to access a network file system.
  The server is running under the same operating system?

  Timo

• question: webworks upgraded to 1.0.3.8 SDK version, "file not found" error on cmd at the launch on Dev-alpha 10.0.6

  Hi all

  I have updated the Webworks SDK to its new version 1.0.3.8. The applications have been installed successfully in the previous version... now, when I'm working on that, I am faced with a question saying failed to create the application process: no such file or directory. at the command prompt (start the emulator of the ripple, once packed and signed with success).

  I checked the credentials files, debugtoken file, bar etc. The script src that I am referring is also correct.

  Thank you.

  Is resolved now. I upgraded my bb device - 10.0.9 and everything works fine

• Error file not found in Temp. Firefox does not start

  When I try to start Firefox (Windows 8.1 desktop computer) I get a full white screen with only the following error message:

  File not found
  Firefox can't find the file at / c; /Users/ username/AppData/Local/Temp/name of file (more than fifty characters long, all the numbers and letters without anything that looks like a real word and ends in /BGAW05 .htm).

  It of only a button to Try Again that never works and some directions to verify the name of the error file, or check if the file has been moved, renamed or deleted. I check to see if the file is no where on C: and it doesn't. It is there no file in Temp even remotely close to that name. I run Firefox with several tabs that are registered and come back when I restart Firefox. So maybe this file in Temp was associated with a deleted tab.

  As I said, this error message comes up full screen, covering the taskbar and not reduce it, restore, close buttons, as if I was running in mode Metro, I never do and will never do.

  Because of this error I can not even start Firefox now, so I had to become a user of Internet Explorer.

  How can I get Firefox to stop looking for this file?

  Any help on this will be greatly appreciated. Thank you.

  I found a solution to my problem. Looking in my info on solving computer problems, I noticed that some problems can be resolved by the administrator. I tried with Firefox and it worked. The only damage was that I lost the current tabs. But Firefox seems to work fine otherwise.

• upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.

  TT2

• Hello! I get the message "File not found" when I try to access my photos

  Hello! I get the message "File not found" when I try to access my photos in lightroom, and I can't find my photos! I had cleaned up my Mac and deleted by mistake in a different location and now only a gray peak appears in LR, along cable message, file not found. I had saved the raw disk backup files, but it won't let me import into lightroom. (Alright will appear in the import box, but it won't let me even click on it to add. Help!

  In the grid, right-click on an image of 'missing', select 'go to the folder in the library.

  If the folder view does not resemble what you show Finder, right-click on a folder and select 'Show the parent' '; repeat if necessary.

  This will show you where LR thinks that the file was originally.

  You can try to put the images where they were, or place them go elsewhere and 'move' the file in LR.

• VM - file not found

  Hello

  I have a virtual machine that does not start for some reason any! When I select the VM & Power On, I get a message "file not found".

  Research in the data store I do not seem to miss all the files. There are the following files:

  1 vmx

  2 Vmxf

  3 Vmsd

  4 Vmdk

  4 Nvram

  Does anyone have an idea how I can fix this?

  I've attached the vmx file.

  Appreciate any help.

  Have you successfully turned this area historically?

  I see the file vmx you have 3 drives assigned to this virtual machine, they are all in the VM data store? (MCSharepoint.vmdk, MCSharepoint_1.vmdk, MCSharepoint_2.vmdk)

• Request for URL AS3 file not found

  Hello

  I just learned last night of Ned Murphy how to encode a btn in AS3.

  Problem is when you test the site frameset Dreamweaver, site name: URLRequest on drive C with my browser by default F12, I get a problem loading the page / file not found.

  Here's the AS3 code btn.

  Btn1.addEventListener (MouseEvent.CLICK, btn1Click);

  function btn1Click(evt:MouseEvent):void {}
  var url: String = "C:\WebSites\FrameSets\URLRequest\mainFrame1.html";
  var req:URLRequest = new URLRequest (url);
  navigateToURL (req);
  }

  Just for comparison, here is the code of btn AS3 Ned copy pasted to my son last night.

  Btn1.addEventListener (MouseEvent.CLICK, btn1Click);

  function btn1Click(evt:MouseEvent):void {}

     var url: String = " http://www.Awebsite.com/aWebpage.html ";

  var req:URLRequest = new URLRequest (url);

  navigateToURL (req);

  }

  What keeps my browser to order 'C:\WebSites\FrameSets\URLRequest\mainFrame1.html ';

  What is the var url: String?

  Thanks for reading

  Sabby76

  It could be a typo (paste C:\WebSites\FrameSets\URLRequest\mainFrame1.html into your browser to test), or it could be a security breach (go to http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm and set the safety of your flash files).

• SmartView and file not found: HsAddin

  Hello guys,.
  
  I reinstalled SmartView twice and made the next round as well:
  
  1. copy the HsAddIn.dll, the HsSpread.dll, the HyperionSmartTag.dll and the HsTbar.xla in the Bin folder.
  Path: < drive >: \Hyperion\SmartView\Bin
  
  2. paste it on the Add-Ins folder for this user.
  Path: C:\document and settings\ < user > \ApplicationData\Microsoft\AddIns
  
  Then,
  Start - Run - regsvr32 (space) - drag the HsAddIn.dll to re-record.
  Go to tools - AddIns - browser for HsTbar.xla in the AddIns folder, and then click ok.
  
  But I always got the error:
  
  File not found: HsAddin
  
  When I add the add-in in MS Excel and click the SmartView buttons (the Toolbar of Hyperion
  does not appear).
  
  
  Any ideas?
  
  I use Hyperion Smart View for Office Release 9.3.1.2 Microsoft Windows x 86 Setup
  
  Published by: metalray on March 19, 2009 06:43

  I got exactly the same problem with a particular user. It has something to with excel. If you google the error you'll find. To work around the error, I copied the dll in the "System32" folder and saved. Although the intention is for the add-in or in the folder of Hyperion, the user doesn't have a problem since place the dll in the folder root Windows.

  I hope this helps.

• I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  63f5a1a9-ECA2-4300-B10f-22cd940a8726 wrote:

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  It is a symptom of textbooks classic does not have read and followed the original instructions to prepare the downloaded files.  You should have two files zip files.  They both must be decompressed in the same directory.  If you unzip using Windows graphic interface - in right click on the name of the file and selecting "extract all...". "the default behavior will be to create a directory, the same name as the zip file and extract in it.  Thus, file_1_of_2 pulls in directory_1_of_2 and file_2_of_2 extracted in directory_2_of_2.  You must override this stupid behavior by default and specify the directory yourself.  And specify the SAME directory for both files.

  Or just go to a command prompt, change directories to the directory where the two zip files are located and deliver "unzip " and "unzip ", and they will both be properly unpack to a directory named "database".

• ConfigurationException when deploy "CONFIGURATION IMPOSSIBLE! File not found. "

  Hi all
  
  My App adf deployment fails with the following error. Although until yesterday, it was a failure, but at least it was going much further than that. What is causing this error? I make changes to the file config.xml, and then restored. Any help is appreciated. This is crucial.
  
  
  # < Sep 14, 2011 1:23:36 PM CDT > < Info > < deployment J2EE SPI > < brksvw379 > < AdminServer > < ExecuteThread [ASSET]: '9' for queue: '(self-adjusting) weblogic.kernel.Default' > < u00w669 > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae49 > < 1316024616200 > < BEA-260121 > < Initiating deployment operation for application, myProject [archive: F:\Oracle\Middleware\user_projects\domains\BPEL_DEV\servers\AdminServer\upload\myProject.ear] , to AdminServer. >
  # < Sep 14, 2011 1:23:47 PM CDT > < Info > < hats > < brksvw379 > < AdminServer > < ExecuteThread [ASSET]: '9' for queue: '(self-adjusting) weblogic.kernel.Default' > < u00w669 > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae49 > < 1316024627386 > < BEA-149038 > * < initiating the task for myProject: [Deployer: 149026] deploy myProject on AdminServer. > *.
  # < Sep 14, 2011 1:23:50 PM CDT > < Info > < J2EE > < brksvw379 > < AdminServer > < [pending] ExecuteThread: '5' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c > < 1316024630053 > < BEA-160170 > < imported library Extension-name: adf.oracle.domain, Specification-Version: 1, the implementation-Version : 11.1.1.2.0 for myProject Application >
  # < Sep 14, 2011 1:23:50 PM CDT > < Info > < WorkManager > < brksvw379 > < AdminServer > < ExecuteThread [pending]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c > < 1316024630069 > < BEA-002903 > < creation WorkManager "wm/SOAWorkManager" WorkManagerMBean for application "MyProject" >
  # < Sep 14, 2011 1:23:50 PM CDT > < Info > < hats > < brksvw379 > < AdminServer > < ExecuteThread [pending]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c > < 1316024630272 > < BEA-149059 > < Module weblogic.xml.registry.XMLModule of myProject application switches from STATE_NEW to STATE_PREPARED on server AdminServer. >
  # < Sep 14, 2011 1:23:50 PM CDT > < Info > < hats > < brksvw379 > < AdminServer > < ExecuteThread [pending]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c > < 1316024630272 > < BEA-149060 > < weblogic.xml.registry.XMLModule Module of the application myProject successfully spent STATE_NEW to STATE_PREPARED on server AdminServer. >
  # < Sep 14, 2011 1:23:50 PM CDT > < Info > < hats > < brksvw379 > < AdminServer > < ExecuteThread [pending]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c > < 1316024630272 > < BEA-149059 > < Module empty.jar of myProject application switches from STATE_NEW to STATE_PREPARED on server AdminServer. >
  # < Sep 14, 2011 1:23:50 PM CDT > < Info > < hats > < brksvw379 > < AdminServer > < ExecuteThread [pending]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c > < 1316024630272 > < BEA-149060 > < empty.jar Module of the application myProject successfully spent STATE_NEW to STATE_PREPARED on server AdminServer. >
  # < Sep 14, 2011 1:23:50 PM CDT > < Info > < hats > < brksvw379 > < AdminServer > < ExecuteThread [pending]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c > < 1316024630272 > < BEA-149059 > < Module mySubProj of myProject application switches from STATE_NEW to STATE_PREPARED on server AdminServer. >
  # < Sep 14, 2011 1:23:50 PM CDT > < Info > < HTTP > < brksvw379 > < AdminServer > < ExecuteThread [pending]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c > < 1316024630771 > < BEA-101363 > < Application: myProject, WebApp: mySubProj a context root specified in application.xml : "mySubProj." The context root specified in weblogic.xml: 'mySubProj' will be ignored. >
  # < Sep 14, 2011 1:24:53 PM CDT > < Info > < hats > < brksvw379 > < AdminServer > < ExecuteThread [pending]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c > < 1316024693171 > < BEA-149060 > < mySubProj Module of the application myProject successfully spent STATE_NEW to STATE_PREPARED on server AdminServer. >
  # < Sep 14, 2011 1:24:53 PM CDT > < Info > < hats > < brksvw379 > < AdminServer > < [pending] ExecuteThread: '6' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac > < 1316024693312 > < BEA-149059 > < Module application myProject weblogic.xml.registry.XMLModule changes from STATE_PREPARED to STATE_ADMIN on server AdminServer. >
  # < Sep 14, 2011 1:24:53 PM CDT > < Info > < hats > < brksvw379 > < AdminServer > < [pending] ExecuteThread: '6' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac > < 1316024693312 > < BEA-149060 > < weblogic.xml.registry.XMLModule Module of the application myProject successfully increased from STATE_PREPARED to STATE_ADMIN on server AdminServer. >
  # < Sep 14, 2011 1:24:53 PM CDT > < Info > < hats > < brksvw379 > < AdminServer > < [pending] ExecuteThread: '6' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac > < 1316024693312 > < BEA-149059 > < Module application myProject empty.jar changes from STATE_PREPARED to STATE_ADMIN on server AdminServer. >
  # < Sep 14, 2011 1:24:53 PM CDT > < Info > < hats > < brksvw379 > < AdminServer > < [pending] ExecuteThread: '6' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac > < 1316024693312 > < BEA-149060 > < empty.jar Module of the application myProject successfully increased from STATE_PREPARED to STATE_ADMIN on server AdminServer. >
  # < Sep 14, 2011 1:24:53 PM CDT > < Info > < hats > < brksvw379 > < AdminServer > < [pending] ExecuteThread: '6' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac > < 1316024693312 > < BEA-149059 > < Module application myProject mySubProj changes from STATE_PREPARED to STATE_ADMIN on server AdminServer. >
  # < Sep 14, 2011 1:24:53 PM CDT > < Info > < hats > < brksvw379 > < AdminServer > < [pending] ExecuteThread: '6' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac > < 1316024693312 > < BEA-149060 > < mySubProj Module of the application myProject successfully increased from STATE_PREPARED to STATE_ADMIN on server AdminServer. >
  # < Sep 14, 2011 1:24:54 PM CDT > < WARNING > < HTTP > < brksvw379 > < AdminServer > < [pending] ExecuteThread: '6' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac > < 1316024694451 > < BEA-101162 > * < com.sun.faces.config.ConfigureListener listener has not defined by user: java.lang.RuntimeException: com.sun.faces.config.ConfigurationException : CONFIGURATION FAILED! File not found.*
  java.lang.RuntimeException: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! File not found
  at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:294)
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:637)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
  at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
  at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
  at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
  at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
  in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)
  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:69)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
  Caused by: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! File not found
  at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:357)
  at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:227)
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:637)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
  at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
  at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
  at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
  at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
  in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)
  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:69)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
  Caused by: java.io.FileNotFoundException: file not found
  at java.util.zip.ZipFile.open (Native Method)
  in java.util.zip.ZipFile. < init > (ZipFile.java:117)
  in java.util.jar.JarFile. < init > (JarFile.java:135)
  in java.util.jar.JarFile. < init > (JarFile.java:72)
  at com.sun.faces.facelets.util.Classpath.getAlternativeJarFile(Classpath.java:262)
  at com.sun.faces.facelets.util.Classpath.search(Classpath.java:115)
  at com.sun.faces.facelets.util.Classpath.search(Classpath.java:92)
  at com.sun.faces.config.configprovider.MetaInfFacesConfigResourceProvider.loadURLs(MetaInfFacesConfigResourceProvider.java:159)
  at com.sun.faces.config.configprovider.MetaInfFacesConfigResourceProvider.getResources(MetaInfFacesConfigResourceProvider.java:107)
  to com.sun.faces.config.ConfigManager$ URLTask.call (ConfigManager.java:1096)
  to com.sun.faces.config.ConfigManager$ URLTask.call (ConfigManager.java:1064)
  to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
  at java.util.concurrent.FutureTask.run(FutureTask.java:138)
  at com.sun.faces.config.ConfigManager.getConfigDocuments(ConfigManager.java:642)
  at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:309)
  at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:226)
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:636)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
  at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
  at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
  at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
  at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
  in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)
  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:68)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
  >
  
  
  
  
  
  
  I did some more research and found that loadURLs of the method of metainffacesconfigresourceprovider class. Java throws an IOException. Is this some kind of class path problem? Help, please!
  
  Private Collection < URL > loadURLs(ServletContext context) throws IOException {}
  154
  155 set < URL > URL = new HashSet < URL > ();
  156 for (enumeration < URL > e = Util.getCurrentLoader (this) .getResources (META_INF_RESOURCES); e.hasMoreElements ();) {
  157 urls.add (e.nextElement ());
  158}
  159 urls.addAll (Arrays.asList (Classpath.search ("META-INF /", ".faces - config.xml")));
  160 / / special case to find a taglib files in WEB-INF/classes/META-INF
  161 paths set = context.getResourcePaths (WEB_INF_CLASSES);
  162 if (path! = null) {}
  163 (path of the object: paths) {}
  164 string p = path.toString ();
  If 165 (p.endsWith(".taglib.xml")) {}
  URLs.Add (context.getResource (p)) 166;
  167}
  168}
  169}
  Return URL 170;
  171
  172}
  173
  
  Published by: user12054715 on Sep 14, 2011 14:13

  You have a faces - config.xml in the directory WEB - INF file?

  You probably have something like the following in your web.xml file:

  
      com.sun.faces.config.ConfigureListener
   
  

  You have this class in the classpath? The jars containing this class are presented here: http://www.findjar.com/class/com/sun/faces/config/ConfigureListener.html