ABF files import

When you try to open the files of the Axon, I get the following

Unable to load the file "C:\Users\Circuit\Desktop\CCF MUSIC\Patient 7\pt7smp3.abf" with the magazine "Axon_ABF".
        
Additional information:
"Unable to load the file selected from the Axon_ABF!
"This file does not have OperationMode = 5 (episodes).
We do not episodic files, so what can be done to fix this?

Hi Ronald,.

I got your ABF published file and was able to reproduce your error with the existing Axon_ABF use both twist the use to work around the error.  Now, I seem to be get all data values 15 million who are supposed to be in the data file imported in the data portal.  If you know what channels are expected to be called, and especially where this information is stored in the file of the ABF, let me know.  Because now I just them named "Ch 1", "Ch 2", etc. in the case of data non-sweep.

Let me know how it works for you,

Brad Turpin
Tiara Product Support Engineer
National Instruments

Tags: NI Software

Similar Questions

  • I want to import bookmarks from Safari on same Mac computer. Said Firefox Help Bar Menu/file/import. My Firefox doesn't have the file/import option. How to import bookmarks from Safari to Firefox?

    I want to import bookmarks from Safari on the same Mac computer. Firefox
    Aide said use bar Menu/file/import.
    My Firefox doesn't have the file/import option.
    How to import bookmarks from Safari to Firefox?

    10.2 Firefox on Lion does not import and backup under Show all bookmarks or the file import wizard and the option to import during the installation of Firefox did not work. Private browsing is not on. How to import bookmarks?

  • It cannot remove the files imported in Media Center in Windows 7 Media Center!

    Today, I created folders Win 7 Media Center of Vista Media Center in the hope of being able to watch some TV recorded in Win 7. Does not work and more than 1000 files and folders cases imported into Vista. I have the ability to delete "existing" files in the Vista Media Center. All imported records do not give me the option to right-click and delete! Help!

    Hi stur2009,

    Method 1: You can delete these folders to be monitored by Windows Media Center. To do this, follow the steps below

    (a) on the Windows Media Center start screen, navigate to tasks, and then click settings.

    (b) select the library configuration.

    (c) select stop watching a folder , and then select Next.

    (d) uncheck the folders you want Windows Media Center to stop watching, and select Next.

    (e) in the next screen, select Finish .

    Method 2: You can manually delete the files imported from the original location on the Windows Vista-based computer.

    You can see the article below, which deals with a similar question

    A multimedia file or its content remains in the media library after you select the option to stop to look at the record in Windows Media Center in Windows Vista

    http://support.Microsoft.com/kb/940161/en-us

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer
    ---------------------------------------------------------------------------------------------------------
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to recover a deleted file important?

    original title: delete the file

    How to recover a deleted file important?

    Hello

    Recuva - free - recovers files deleted from your Windows computer, Recycle Bin, digital
    map of the camera or MP3 player. And it's free!
    http://www.Piriform.com/Recuva

    Forums - help here
    http://Forum.Piriform.com/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • .Mp4 and .mts video files import problems

    I've updated Premiere Pro 2015.4 and now all .mp4 or .mts files import video shows only and not audio. It's as if there is no sound in the video. Nobody knows all the solutions to this problem?

    Hi Jonathanm,

    Please close Premiere Pro and clean the media cache.

    FAQ: How to clean the files hide media

    Re-launch of Premiere Pro and import your files again.

    Thank you

    Ilyes Singh

  • File/import/Images of device / 'no camera or scanner not selected'... no device. Where is he? iMac El Capitan

    File/import/Images of device / 'no camera or scanner not selected'... no device. Where is he? iMac El Capitan

    Hi Tsavaruach,

    Could if it you please let me know the version of Lightroom that you are working on, also please make sure that Lightroom is to this day.

    Please update: keeping up-to-date for Lightroom

    Kind regards

    Tanuj

  • I downloaded and installed Photoshop elements 11 on my new Macbook Pro.  Why can I not see my scanner (Epson Perfection 3200 Photo) of the file > Import menu?

    I downloaded and installed Photoshop elements 11 on my new Macbook Pro.  Why can I not see my scanner (Epson Perfection 3200 Photo) of the file > Import menu?

    There was no updated driver available (he says that my driver was aware), so I just deleted the scanner and the computer restarted.  When he came, the scanner has already been added again.  With great anticipation, I tried to import Photoshop... but no luck (scan was not visible).  I finally ended up calling Epson (had a lot of difficulty finding a support number) and they me finally there is no update driver for OS X 10.10 and I should like a work around using "Image Capture" application  I tried it and it works very well.

  • I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!

    I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!

    Try asking in the forum Premiere Pro seems to be an Adobe first Pro Lab

  • Save the file imported into oracle directory

    Hello.
    I'm on a project where I need to import a CSV (imported by using app APEX 4.0.1) in a specific oracle (complete and functional) table, and then save the file imported to the server.
    This part of the savings on the disk where I have my doubts.
    I know that I can use utl_file to write the file to an Oracle Directory, but that I have to open the blob (file) twice: one for import to the table and the other to write to the disk - because I want to just save if the file is successfully imported.

    Is there a more direct way to do this?

    Thank you
    vssantos

    NO, you could use an external program to C and then to write a wrapper for an Oracle to store the BLOB in an Oracle Directory. : http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:6379798216275

    Thank you

    Tony Miller
    Webster, TX

    Time passes fast like the wind, but the flies from fruits such as bananas.

    If you answer this question, please mark the thread as closed and give points where won...

  • MOV files import trouble in first pro cs3 adobe

    Hello

    I just bought a Canon 60 d camera and I'm using adobe first pro cs3 for the first time.

    I tried to import my Canon 60 d MOV file footages, but it says that my files are not supported.

    I don't know what to do!

    Can someone help me?

    Thank you.

    Welcome to the forum.

    Full HD H.264 in a file format MOV of DSLRS is beyond the capabilities of CS3.

    I recommend using

    Square 5 - MPEG Streamclip video converter for Mac and Windows

    to convert the video to a lossless codec lossless as Avid DNxHD or Apple Photo-JPEG (75% quality value) nearby.  See if the converted files import and edit properly in CS3.

    Get the Avid codecs for free here:

    Download Avid QuickTime Codecs 2.1

    -Jeff

  • Impossible to import favorites Safari etc. The Firefox file > import... menu is missing element.

    I was not offered the option to import Safari during the first run after installation.

    This is the second time that I have installed Firefox on this machine. I removed the .app file and purged the library after the first installation, which was months ago. I suspect this is the cause of the problem, but I don't know how to fix it.

    Maintenance of the premises {web link}
    Allows to run Maintenance tasks on the database that drives
    Bookmarks and history module places behind Firefox.

    Open the Add-ons Manager. Locate the add-on, then press the Options button.
    Select all tests. On the bottom, then press Execute .

  • When I go to file/import, import the button is not available, i.e. with a shadow to and won't allow import of MS Explorer Favorites

    I followed the instructions of Firefox Help. The 'Import' button is not in bold black print as all other files menu points. Import button is showing that pale grey and doesn't allow the import to proceed

    This can happen if you're in private browsing mode that disables some menu items.

    1. On the Tools menu, select Options to open the options window
    2. Go to the Panel for the protection of personal information
    3. Change the setting "Firefox will" to "Remember history", or if it is set to "Use the custom settings for history", deselect the setting "automatically start Firefox in a private browsing session.
  • Movie files imported via iTunes in Keynote for iPad has no sound

    IM import my Keynote presentation files that are for the most part JPEG files, but also 6 movies and created
    on my iMac then the presentation has been imported through iTunes in Keynote for my iPad4 - but for
    one reason that movies have not all the sounds on the iPad - what they do on the version of the iMac - any help would be appreciated

    What version of Keynote and Mac OS X are you using?

    In the latest version of Keynote on Yosemite, he reported no problems with the transfer for iPad movie or sound files

  • Virtual Excel file import NI Switch Executive device problem

    When I try to import OR switch Executive configuration to a file .xlxs error

    "An error occurred trying to read the file. Invalid device name «THIRD _PARTY_MATRIX» IVI "An error occurred while trying to access primary device _PARTY_MATRIX error THIRD: (Hex 0xBFFA4001) unknown status code.

    is displayed. I have no problem importing OR switch configuration Executive in .xml format! Can someone tell me why? Please, I beg you!

    I use a switch

    Executive 3.0

    Measurement and Automation Explorer worm 4.5.0f0

    LabVIEW 8.6.1

    Thank you very much

    Hi Mehran,

    Thanks for providing the attached files.  I have determined that the cause of the problem may be due to a setting of simulation of IVI.

    Currently, your IVI Driver Max sessions are configured so that simulate attribute is set to False.  This means that real hardware must be connected when opening a session IVI instrument.  If you do not have the hardware attached, then the call to initialize IVI fails (and potentially bad, depending on how the IVI specific driver manages an init call without hardware).

    Import the NI Switch Executive configuration in .xml format does not cause a problem because simulate is always set to true in the call to initialize of IVI.

    We will consider changing the import Excel in the future to also have always simulate the True value.  Time, you can a) check the hardware is connected when you import Excel, or b) set the value "Simulate with" Max to 'Specific Driver' applicable IVI pilot sessions.

    Example of setting "with"to simulate 'Specfic Driver' of MAX:

    Let me know if you have any other questions!

    Chad Erickson

    Switch Product Support Engineer

    NOR - USA

  • Ini file importing visa connection problems

    Hello

    In the Test Import Connections.vi joint, I try to import a resource (COM3) of a configuration file name. Import the keys in an initialized global functional. The functional global is read and the output is sent to a production cluster. However, after running the code, I always end up with an empty string for the name of the resource in the cluster of production. When I run the vi within the main application, I get an error 3, (or the possible reasons: LabVIEW: internal error.) Area of poorly accessed memory. (= OR-488: GPIB controller does not correctly addressed.) (I don't have a GPIB controller in my system.)

    Any ideas why it does not work?

    Thanks for your help.

    Peter

    With each entry, you are erase all previous data in the shift registers.  You must run 1 writing or make a check for each setting see if it is updated.

Maybe you are looking for