Able to connect to the Internet, but not be able to access router settings
I can connect to the Internet fine, ping works, but I can't connect to the router settings.
Specifications
- Router IP: 192.168.1.1
- IP address: 192.168.1.150 USING static IP
- Browser: Safari
- Error message: Safari cannot open the page because the server dropped the connection unexpectedly.
- If you need a card, leave a reply!
Hey Harpo1! Try to access the configuration page using a computer connected to the router. If it does not connect to the page, reboot the router and use a different web browser could help. You can also try to temporarily unplug the modem and see if you can access it.
Tags: Linksys Routers
Similar Questions
-
Connected to the internet, but not connected network magic shows
My network is connect to the internet, both wired and wireless. On the compputer connected by magic cable network shows not connected, but I am connected. Unable to print remotely. Router shows connected but the network card is not.
Thank you
After reading your response, I decided to uninstall and reinstall the program. Thought it would be a little easier. I felt that the problenm was that the program had been damaged but hesitate to reinstall it because I downloaded from the internet several years ago and could not find the product key. I finally found the program cisco and the location of the key and now works. Not as sexy but effective.
Thank you once again
-
I can connect to the internet, but not to my home network
I have a PC running Windows XP SP3, which is connected to a Linksys WRT300N router. I have access to the internet. I can not connect to my home network; don't know what happened. all (3) computers are set to the same workgroup name. I can't find anywhere in the network settings for WinXP that relates my network name. Help!
Thanks for any help you can provide.
John
I guess that the other two computers are working properly and that it can network together and that the only problem is the XP machine. I'm also assuming that this problem persists when the firewall was disabled (including hidden like the one in the Cisco VPN client). I also assume you mean by "is no longer connect to my home network" that you can't see other computers in your network neighborhood. See if this article helps you:
"You can't see the other computers in the workgroup on the network on a Windows XP computer"
<>http://support.Microsoft.com/kb/903267 >If this does not help, try to walk your way through the following:
"How to troubleshoot network domestic in Windows XP"
<>http://support.Microsoft.com/kb/308007 >HTH,
JW -
I have and you are using a router D-Link 601. I connect with a desktop computer and 1 another laptop. The laptop which does not connect on the web is an older Compact. I always use Internet Explorer 6.0.2900.xpsp_sp3.101209 - 16471C. Previously, I had dial-up and no problelms.
Hello
This helps remove all connection settings information that computers in Internet Explorer?
Kind regards
Hans
-
Windows Vista computer connects to the internet, but not ping to auto DHCP name
Trying to get my Vista machine to have the file and printer sharing, I can see attached machines, and they can see the Vista machine, but does not connect to the computer. The Vista machine will not see public folders with error code: 0 x 80070035 the network path was not found.
Ping the DHCP name provides:
Main2 ping [fe80::12:f74:b94e:94fb 8%] of 8% with 32 fe80::12:f74:b94e:94fb
YTES of data:
General failure.
General failure.
General failure.
General failure.Ping statistics for fe80::12:f74:b94e:94fb 8%:
Packets: Sent = 4, received = 0, lost = 4 (100% loss),Ipconfig/all
Windows IP configuration
Name of the host...: Main2
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.Wireless network connection Wireless LAN adapter:
The connection-specific DNS suffix. :
... Description: Belkin Wireless G Desktop Card
Physical address.... : 00-11-50-D6-32-97
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::e497:9802:e6a6:40ce % 10 (Preferred)
IPv4 address: 192.168.2.7 (Preferred)
... Subnet mask: 255.255.255.0.
Lease obtained...: Tuesday, October 21, 2008 23:06:50
End of the lease...: Thursday, October 23, 2008 11:06:50
... Default gateway. : 192.168.2.1.
DHCP server...: 192.168.2.1.
DNS servers...: 192.168.2.1.
NetBIOS over TCP/IP...: enabledCard tunnel Local Area Connection * 6:
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 02-00-54-55-4E-01
DHCP active...: No.
Autoconfiguration enabled...: Yes
IPv6 address: 2001:0:4137:9e50:12:f74:b94e:94fb (area
ED)
Address IPv6 local link...: fe80::12:f74:b94e:94fb %8 (Preferred)
... Default gateway. : ::
NetBIOS over TCP/IP...: disabledCard tunnel Local Area Connection * 7:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: isatap. {E71A931D-A587-49DD-BF49-209236344
523}
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesAny help?
-
My husband and I share a PC. He has his desk top and I have mine, just that recently, I have not been able to connect to what anyone on my side of the PC, but its East side works well, it can connect to the internet, but I can't any idea what should I do? I ran virus scan and his side of own, cannot check the mine but cannot connect help please.
Hello
1. you remember to make changes to your computer, after which the issue started?
2. do you have a cable or a wireless connection?I would recommend that you follow these steps.
Step 1:
Test the issue in safe mode with network and check if that helps.
Step 2:
Configure the connection to obtain an IP address automatically.a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "b. right-click on the network connection, and then click "Properties".If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".e. click 'OK '.f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".h. click on 'OK '.Step 3:
Follow the steps in this article and check if that helps.
Why can't I connect to the Internet?
Steps are also applicable for Windows Vista.
-
I can't load ios9.3. I get a message that I am not connected to the Internet, but I check and I am connected.
Apple pulled 9.3 for some devices due to problems.
Just wait and try to come back later.
-
I can't update my iPad to ios9 because the error message says that my update cannot be verified because I am not connected to the Internet, but I am logged in?
Annoying, isn't it? I have the same problem but technical support person responded with a solution. Or maybe it's just too messed up a forum to find the answer? No m
or by e-mail. There are problems with Safari as well...
-
I am connected to the internet, but my network sharing Center proclaims that I'm not.
The paradox connected but not connected
I am connected to the internet, but my network sharing Center proclaims that I'm not. Because some of my programs believe later, they refuse to patch. Also, I used the antivirals ware, scans, System Configuration and deleted and later restored the wireless network.
Any help would be greatly appreciated. Thanks in advance.
Hello
1 reboot as often, this allows the refresh icon and also stops a few things of
interfere with the slot troubleshooting process.Do a 1 Restore Point then you can go back to where you were if necessary.
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html------------------------------------------------------
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Do
It will be the same for network (NIC) card - then right click on the devices and UNINSTALL - Reboot -
update the driver stacks.Now go look at the site of the manufacturer of the system for the updated drivers.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-----------------------------
Allow you to reset your TCP/IP stack just to make sure:
Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN
Enter these one at a time (or copy and paste) and press ENTER after each
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
Reset
----------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT.---------------------------------
Other tips:If the use of a wired cable - Control Panel - device - network adapter - (NIC) Manager - double
Click Advanced settings and set the "speed & Duplex" 10 Mbps full duplex and then try 1/2
double-sided. Be sure to APPLY / OK. Maybe some help here: (don't forget the answer is)
complicated because there's probably more than one single thing, the origin of the problem)Others.
http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/
http://www.annoyances.org/exec/Forum/WinXP/1109372091
There are many causes, one of which is the small monitor pays attention to the evil network device.
You can try to disable any other network such as WiFi device and reboot to see if that has an effect.Still a problem of equipment such as a loose network card that is not properly attached to the computer can
cause this.http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm
I hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
WRTG54S to connect to the network, but not internet
I have a WRTG54S and Mediacom 12mbps. My router worked fine on my old laptop (a Dell Vista), he was sitting in a box for about 6 months and now that I have a new (Sony running 7) I can connect to my network, but not internet. I have updated the firmware of 7.6 to 7.8 without change. I have tried no security, wep and wap without change. Also, I cloned the MAC, once again no change. Windows cannot detect all problems, and when I try to activate the router to connect to the internet it always says connection failed. I can connect directly connected to the modem but not when connected to the router or wireless. Any ideas? Thank you
Problem solved. I had to go to a Motorola SurfBoard 4100 to a 5100. Thanks anyway
-
Computer connects to the network, but not to the Internet, connect to the only local
Hello world
OK, so I have a HP computer with the installed version of Windows Vista Home Premium 32-bit. I've had it for almost 2 years now and have had no problems connecting to Internet... until now.
I can connect to networks... both wireless and cable, but I can not get Internet. I used the IP, subnet mask, gateway and server settings DNS to another computer that works with this specific local network just to see what happens... my computer has failed.
Until recently, I could connect to this WiFi connection in a coffee shop, but the last time I tried it didn't work. I've connected to the network but not the Internet. He told me that the DNS server did not. I'm starting to think that something is wrong with my computer.I saw that the solution for some people running the Norton removal tool, however I had uninstalled Norton almost as soon as I got my computer 2 years ago and ran McAfee instead. I don't think that Norton should have an impact on me more.
Is there a solution to this problem... or I'll just have to try everything that is out there?
Thanks for your help!
Hi MomPlaysBass,
Finally, my problem has been resolved - it wasn't my computer after all. The modem may only be connected to a computer. If you want to connect to another computer, you can connect the computer to the modem and then put it back. My computer worked fine after that. Whenever we want to switch between computers, even if I have to reset the modem.
I don't think you have the same problem, but just in case, you can try to reset your modem - it's a button on the back or a small hole that you can reach with a pen... Hold the stylus for about 5 sec or maybe a bit more and then let go. That should reset your modem and might help you with your problem. Your computer should also have created a restore point... If all else fails maybe you can try to get back to the final point where your computer worked.
-
Original title: connection problem
I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.
The message I get when trying to connect is simply that I cannot connect you at this time and that I should follow a link to reset the password - what I've done without result. The computer is connected to the internet.
Hello
Thanks for posting your query on the Microsoft Community.
With the publication of the description, I understand that you are unable to access your computer using Microsoft password account on the machine Windows 8. I will certainly help you get this problem.
I would be grateful if you could help me with more information:
1. Since when you are facing this problem?
2. What is the exact error you receive by accessing the computer?
I would say to you follow the suggestions provided by Cliff_N responded on 7 December 2012 in the below thread Microsoft:
Important information: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
Note: When updating, the applications you have installed Web sites and DVDS is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.
For more information, you can consult the Microsoft article.
What to do if you forget your Windows password
http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8
Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.
-
I am connected to the internet, but it is said in the toolbar not connected and connections are available. There is only 1 link and I'm connected to it. How can I change display green bars, instead of grey bars with a yellow star?
As the title says.It's weird, and I think that this is the reason why some of my programs connect properly?Does anyone have a solution to fix this problem?Hi DamienDwyer,
1. are you referring to the status of job internet bar?
2 when the problem started?
3. have you made changes on the computer recently?Method 1
Try troubleshooting of network running.Use Network Troubleshooter event logs to solve network problems
http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problemsMethod 2
check the status in safe mode with network and display the results.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeMethod 3
I suggest you try the steps from the following links:Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsWireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions -
I am fully connected to the Internet, but when I click on my home page and even several other pages, including Windows Live Mail, I get an error message that my DNS server is not responding. How can I work around this problem and to connect to the Internet anyway?
You want to be sure that you use the right setting for your DNS server. You can move this in your browser using the digital URL for the what you want to access web sites. You will find them by using the PING command at the command prompt. Hold the Windows key and press R. Then type CMD and press ENTER. Then enter for example to get the address of the web site of MS PING WWW.MICROSOFT.COM.
Unless otherwise directed by your Internet service provider, you want TCP/IP settings to "obtain an IP address automatically" and "Obtain DNS server address automatically". To do this click Start-> Control Panel-> Network Center and sharing-> view status.
Then click on properties.
From there, click on Internet Version 6 Protocol and properties.
Click on the two radio buttons to "obtain an IP address automatically" and "Obtain DNS server address automatically". Click OK.
Then click Internet Version 4 Protocol and make the same changes in what concerns the version 6.
I hope this helps. Good luck.
Good luck.
-
Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?
Disable the firewall and check the connectivity in media center.
Maybe you are looking for
-
recharge the IPod Shuffle, the IPod Shuffle must be activated?
Recharge the IPod Shuffle, the IPod Shuffle must be activated?
-
HP ENVY 15-Q006TX TS: create recovery disk
I use HP ENVY 15-Q006TX with Windows 8.1 TS x 64 I deleted the recovery partition as well as everything it can how can do a new partition and a new recovery image for installation of windows frsh came straight out of the box
-
Find &; network configuration address to WRT54GL v1.1
G ' Day. I'm usually successful using a WRT54GL in a small network office at home, but want to determine it's LAN and WAN network address and then set them manually. How can I find it? It is no longer default 192.168.1.1 because that is used by my
-
Make a right click causes Explorer to restart
Make a right click causes Explorer to restart Signature of the problem:Problem event name: BEX64Application name: explorer.exeApplication version: 6.1.7600.16450Application timestamp: 4aebab8dFault Module name: CryptoProvider.dll_unloadedFault Module
-
Hello, I'm having a problem of site Web [link deleted]. I want to install Wordpress on my PC, I tried several times but could not install, can someone please help me?