About the RAM, I have 32 GB...... is there any advantage to allocate a large amount of this, or is there a limit that really MAKES a DIFFERENCE...?

About the RAM, I have 32 GB...... is there any advantage to allocate a large amount of this, or is there a limit that really MAKES a DIFFERENCE...?

@

It depends on what you are doing and the rest of your system.  Eventually, if you like the video, it will impact.  But for still images, it is unlikely you will come anywhere close to that.  You can check it by placing the bar at the bottom left of the screen to show effectiveness.  As long as you use only RAM it will say 100%.  If you go below, you use your drive to work.  But even in this case, use to scratch a little, if you have an SSD, is not a big deal.

Even my laptop 8 GB rarely gets bogged down (but I close the old files).  My 16 GB Office doesn't happen nearby.  But I'm not video.

Tags: Photoshop

Similar Questions

  • Is there a limit that is inherent in the length of a listbox in LabVIEW 2010?

    Is there a limit that is inherent in the length (number of lines) of a listbox control in LabVIEW 2010?

    Thank you.

    Probably limited to 2 ^ 32 entries.

    But I bet that the UI becomes unmanageable long before that.  I experimented with putting 1 million admissions.  It worked, but my mouse clicks seemed to slow down.

  • When I scroll with the wheel of the mouse Microsoft Wireless Mobile Mouse, it jumps instead of sliding to the bottom of the page. It ignores even the large amounts. This can be solved? Rose

    When I scroll with the wheel of the mouse Microsoft Wireless Mobile Mouse, it jumps instead of sliding to the bottom of the page.  It ignores even the large amounts.  This can be solved? Rose

    Hi Rose,
     
    The problem occurs on specific applications?
     
    This can be for one of the following reasons:
    1. bad mouse is selected in the IntelliPoint software.
    2. conflict with other mouse or pointer (non-Microsoft) software.
    3. problem with IntelliPoint software or drivers.
    4 application does not correctly recognize scrolling the mouse messages.
     
    I suggest for the link and follow the steps in the KB article:
    The problems with the mouse button or scroll the parameters
    Note: Put the computer to normal mode after the troubleshooting in clean boot mode.
     
    Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.
  • PS CS2 does not open due to the error about the RAM...

    I've been running Photoshop CS2 since it came out and never had any real problems. Then the other night, I loaded about 20 custom shape files that had about 10 forms of each of ActionFx.  I played with them for a while and it worked fine.  Then I shut my computer down that night.  The next morning, I tried to open Photoshop and got the following message "could not complete your request because there is not enough memory (RAM live).

    I have tried everything I can think of to fix this, so I'm pretty desperate for help.  Finally, I resorted to uninstall the Photoshop of CS2 component.  Then I defragged and reinstalled.  When this does not work I uninstalled all CS2 including my preferences.  Defragged again and reinstalled.  All other open and working components (Illustrator, GoLive, InDesign, etc.) but Photoshop isn't always a go

    Something I find really strange is that, if the error message is on the screen that I can still see all my layer styles and actions (even if I uninstalled it twice now).  Of course, as soon as I click ok on the error message everything closes and Windows says "Adobe Photoshop CS2 has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the issue and notify you if a solution is available. "Of course, no solution is ever offered.

    Here is my system:

    Laptop Dell running Windows Vista Ultimate

    (Vivid RAM) memory: 4 GB

    Hard drives:

    C (1 real hard disk): 149 GB free: 103 GB

    D & E (1 partitioned hard disk):

    D: free 135: 40.6 GB

    E: free 13.2: 12.6 GB

    System type: 32-bit operating system

    Graphics card: NVIDIA GeForce 8600 M GT

    Sorry for the long post.  Any help will be very appreciated!

    lvdesigner wrote:

    I used Photoshop CS2 since it was released

    Not on Vista so!

    When this does not work I uninstalled all CS2 including my preferences.

    How did you "Uninstall" your preferences?

    What you did may not be enough. Try to reset your preferences, as described in the FAQ.

    http://forums.Adobe.com/thread/375776?TSTART=0

    You must physically delete (or rename) the preference files or, if you use the Alt, Ctrl, and shift, don't forget you get a confirmation dialog box.

    This resets all settings in Photoshop default.

    (A complete uninstall/reinstall will not affect preferences and a corrupt file it can be the cause of the problem.)

  • Why windows doesn't use all the ram I have available to her?

    new installation of windows 7. card mother support 16 GB of ram, 8 GB installed, windows will only recognize 3 GB, what's up?

    Friday, May 14, 2010 21:12:42 + 0000, bigterry wrote:
     
    > new windows 7 install. card mother support 16 GB of ram, 8 GB installed, windows will only recognize 3 GB, what's up?
     
     
    You are using Windows 7 32 bit?
     
    All versions of Windows 32-bit client (not just Vista/XP/7) have a 4GB
    address space (64-bit versions can use much more). It's the
    theoretical upper limit beyond which you cannot go.
     
    But you can not use all of the 4 GB of address space. Even if you
    have a 4 GB address space, you can use * autour * 3. 1 GB of RAM.
    This is because some of the space is used by the hardware and is not
    available for the operating system and applications. The amount you can
    use varies, depending on what hardware you have installed, but can
    range from as little as 2 GB to 3.5 GB. It's usually around
    3. 1 GB.
     
    Note that the hardware is using the address * space *, not the real
    The RAM itself. If you have a larger amount of RAM, the rest of the RAM
    goes unused because there is no address to map space to.
     
     
    Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
     

    Ken Blake

  • Contradictory information about the Ram

    I have a 2011 Middle 27 "iMac.  It has been running really slow these last few months and I decided that I would try to put some more RAM in it.  My computer says to 1067 mhz DDR3.  I went to the Apple website and it indicates that the computer supports 1333 MHz DDR3 SDRAM.  Now I don't know what to do.  Can anyone shed some light on this for me.

    (See the image with the info on the computer and the Web site)

    It should take the 204 pins PC3-10600 (1333 MHz) DDR3 SO-DIMM.

    Although Apple says it tops out at 16 GB this model may actually go up to 32 GB.

    MacTracker (free in the AppStore) is a very useful application for all information on all Apple devices form ready-made.

  • Tecra M3 - questions about the RAM maximum and graphics driver update

    Hi people,

    I have a Tecra M3 (Variant FBCF with the Geforce 6600 w / 128 MB) and I have two questions that I hope someone here can help me with:

    (1) what is the maximum amount of RAM that I can install here? The manual says 2 GB (2 x 1 GB), but I do not see why the laptop would be paralyzed this necessary way, cause as far as I know the 915G chipset can handle 4 GB of RAM. If anyone knows definitively what?

    (2) the latest drivers from nvidia for XP are 2005. As most of you probably know, nvidia systematically more than past performance with versions driver and adds compatibility with some games that end up in trouble. The real driver from the nvidia site does not install because it says that it cannot find any compatible hardware. Can't Toshiba even a pilot updated annually? There is a driver of 2007 for Vista, I can't believe that if they did, they decide refresh the XP one while they were to him. Any chance of their audience on this here? I could force the nvidia.com driver to install, but I don't think that it's necessarily a great idea.

    Thank you!

    Hello

    the maximum amount specified for this machine memory is 2 GB and 4 GB not but you can try it with 2x2gb modules.

    With regard to your graphics: Don t use the nvidia driver since it is not suitable for mobile graphics chipsets and has no timing in the driver that is needed to run flawlessly.

    I'd rather you to view laptopvideo2go and download some drivers here. :)

    Welcome them

  • I searched on "ev handl" and found three questions about the problem I have. I don't see an answer. I use windows 7 with the latest update of firefox. How can I get rid of the error message?

    When you open windows in Fire Fox, I receive a message from the Application of Java Script. "Exc in ev handl: error: oSAPlg.oRoot.log is not a function".
    I have Windows 7

    Your post is a little different, but very similar to another message and it includes "SA" in the message, so I mean...

    Best solution seems to be to uninstall Site Advisor system and then to reinstall again www.siteadvisor.com as shown in https://community.mcafee.com/message/203466

    See also http://kb.mozillazine.org/Problematic_extensions regarding McAfee Site Advisor 3.4.0 for more specific instructions.

  • Ask questions about the Rams

    I can put a may DDR4 RAM laptop (Inspiron 15R 5521)

    N ° DDR - 3 L is required for this system.  DDR - 4 is physically and electrically incompatible with your system.

  • My browser doesn't look like video tutorials. Some parts have built-in, but there are buttons that show in the videos that aren't in my browser.

    My browser window does not resemble the one in the video tutorials. Some of the buttons show you in the videos are missing in my version. When I click on "about", he said: I'm under 4.0.1 i want cool buttons like everyone else!

    The new interface is the default on Windows Vista and Windows 7 only. To get it under Windows XP, you must hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

    If you need to access the menus, you can press Alt or F10 to display temporarily.

    If you want to change the position of the tab bar, you can right click on a toolbar and click the entry "Tabs at the top".

  • install the drivers, I have a dimage dual scan 11, I can't download a driver for this device

    I have a minolta dimage scan dual 11 I need a driver for. I tried to download, but it will not please help

    Hello

     
    1. which version of the operating system you are using on the computer?
    2 did you do changes on the computer before the show?
    3. what happens when you try to download the drivers?
    4. you receive an error message?

    Provide us some information to help you best.
  • CC of Photoshop take 5 minutes to load, freezes the time slider, requiring a restart of the computer.  IMac 27 ".  By conference call Apple this week, it is not the RAM/computer/storage.  It's associated PS.  No matter which all help with this?

    Also, when frozen, cannot navigate to open other apps/Safari etc.

    Hi Susan,.

    Try to run Photoshop, hold down the SHIFT key on the keyboard and click Yes to ignore the optional plugins loading. If that helps connect some third parties could be the cause of problem. If this is not the case, go to the second suggestion.

    Hold control, SHIFT key and option key when you launch Photoshop and choose Yes to reset

    preferences. If this does not work as well. Try rebooting the machine at startup. See below the link on how to

    Enter the secure boot.

    Try safe mode if your Mac does not end commissioning - Apple Support

    Please post on the Adobe Forums.

  • CS4 does not open the NAVE of Nikon D7000 files; Is there a DNC that opens to them?

    I have CS4 and light room 2

    Apparently there is no Camera Raw update for new NAVE of Nikon D7000 for CS4 files.

    So I downloaded the Adobe Digital negative converter Verson 6.3.0.79 which is compatible with Camera Raw 5.4 or later.

    Using this DNC, when I do step 1, "select the images to convert" I get the message "no items don't match your search.  It is apparently not files NAVE achievements the D7000.

    Is there an another DNC that will open and convert the D7000 NEF files?

    I just bought the d7000 yesterday and had the same problem with cs4. I downloaded the adobe DNG Converter and selected the whole folder where the raw files (I was unable to select individual images) and it worked fine. He treated the files one by one with the new name (without the pricetag CS5 $ 500 at the moment). The DNG files in bridge and psd. Maybe try to select the folder?  Good luck.

  • I downloaded vcredist_86.exe, however, when I try to launch the portal Cooper, my system is not there. How can I make it work?

    I installed the edition of the argent dawn and managed to transfer my accounts from 2005, but all dates are now shown as mm/dd/yyyy. I can't change the UK dd/mm/yyyy. If anyone can help.

    Hello
    Try this link:
    http://social.Microsoft.com/forums/en/money/threads
    b Eddie

  • Windows store error "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

    Original title: Windows 8 store does not.

    Whenever I try to open the windows store, I get the message: "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

    This happens constantly, and because of that I have not been able to upgrade to Windows 8.1.

    Hello

    This behavior can occur if the antivirus application blocking the app Store or changes due to some recent on the computer.

    I would suggest trying the following steps and check if it helps.

    Method 1:

    Make sure that your PC is up to date

    Make sure that updates are installed on your PC and that your antivirus program does not prevent the application from running. For more information about installing updates for your PC, see Windows Update: frequently asked questions.

    Method 2:

    Run 'Windows Apps Store' convenience store

    You must be logged in as an administrator in order to run the "Windows Store Apps" troubleshooter. This tool can automatically find and fix some issues with applications. It is available in English only, but will work in all languages. You can let automatically try to fix any problems found, or select what you want made repairs.

    http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

    Method 3:

    I suggest you delete the Windows Store cache and check how it works.

    1. Press Windows + R logo
    2. Type wsreset.exe in the run window, and then press ENTER.

    Method 4:

    Define the Apps approved in third program Antivirus- If you have a third party AV program installed, check its settings to make sure that the app Store works is not changed to be approved. If the AV program has the app as unreliable, it will block and prevent opening the app.

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

Maybe you are looking for

  • My iPod nano 2nd generation gets disk errors after installing iTunes?

    I use my iPod nano 2nd generation for... Wow little almost 10 years now and of course is not as sensitive, a little laggy sometimes, battery life isn't as good but still never had real problems with it that can be repaired by a reset. Well not until

  • Where can I find an update of the BIOS for Satellite A100-200 (PSAA8E)

    Hello Where can I find an update of the BIOS for this model?The BIOS on the download page is from November last year, is there something more recent, or does anyone know of an update that is compatible? Thank you Ian

  • HP G62 screen jump for the video

    Hello I got the HP G62. It works properly with anything, but when I run any video, after aprox go off the screen 5-10 minutes. I thought it's problem because of the fan system is not working properly, but I replaced the system fan. But still the same

  • Vista to XP disks m9060la

    Hello Can someone please help me find the drivers for my m9060 of elite in order to downgrade to XP? Please note my AV detected as malware tinyurl Thank you very much TIA Concerning Antonio Macias Macias-Please do not use TinyURL my firewall blocks t

  • Smartphones blackBerry enhanced Gmail Plugin on Storm 2

    Before you buy a Storm 2 I wanted to confirm: 1. the Enhanced Gmail Plugin for BlackBerry is already delivered on this subject? 2. the Enhanced Gmail Plugin has only one-way synchronization with Gmail? If 2. is correct, as I have to go.  We have been