AC adapter / CC Qosmio G20 damge - required IC chip number of room

Similar Questions

• Car necessary adapter for Qosmio G20-110 part number

  Hello

  I need a car adapter for my g-20-110, but cannot find any info anywhere on the Toshiba web site.

  Food running a 4-pin, so one of the jobs at low prices from Maplins does not.

  Any ideas?

  Thank you very much

  Richard

  Hello

  I guess you don t know the site Toshiba Options and accessories.

  Toshiba Europe site, you'll find this page in the products:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/home.do?service=EU&from=http%3A//www.Toshiba-Europe.com/

  In the page Options from Toshiba and accessories, you will find taken additional devices supported and compatible for each Toshiba laptop.
  You should also know that Toshiba authorized partner in your country also sells compatible parts.

• Qosmio G20-102 TV TUNER: how to get this to work - what cables are required?

  Hey everybody,

  I just installed vista on my laptop QOSMIO G20-102 (PQG20), I have media library now.
  My laptop came not like MEDIA CENTER EDITION, it came under the home edition of Windows XP (laptop purchased in July 2005).
  I got 3 cables which I have no idea how to use...
  laptop was purchased in Dubai/Emirates and I live in Malta

  These are the cables >
  http://img399.imageshack.us/img399/7189/dsc00780gi6.jpg

  Now for my question (s):
  1 which of these cables do I need? Im just trying to figure out how to get my satellite tv or digital cable to work on my laptop.
  2 antenna adapter (see picture) is not for coaxial cable, what can I do?
  3 I did WINDVR more due to the upgrade of vista, Media Center Gets the job done but I don't know what to do... This guide has confused me even more > http://www.microsoft.com/windowsxp/mediacenter/using/setup/settop.mspx
  I don't have IR control cable, I do not have a remote sensor (but I have some sort of built in the remote sensor on the front of my laptop.

  I'm looking for advice as for example buy this, get rid of it, install this etc...
  Please, anything that can help is appreciated!
  If you need information more just ask, I am here ;)

  Yours sincerely
  Ishmael

  Hi ismael,.
  I'll try to help with that, but it's a long way to the road...
  I don't know what Tv system is used to Malta (Pal)?

  The best way to set up your TV's with Media Center 2005 edition.
  Cables:
  Check the back of your cable TV installation box and find the composite or SVHS output. If you have only the composite, you can use the composite cable of the posted image. If your TV decoder has the SVHS, so you should use, to the better image than composite. You must obtain a SVHS cable for this.
  Look for the audio output rca, too. Mix with the composite cable for the audio Qosmio.

  But you must have:
  1 control cable IR, for media center 2005 configuration as well as your TV decoder. It is cable connected to the remote sensor (see fact sheet on the back).

  2 sensor for your remote control and configure it with the remote control of your TV decoder. In this way, you can control the receiver cable channels, using the remote control for your Qosmio G20 media center edition.
  Recovery: you can change the channels on your TV decoder using the qosmio remote control.

  3. remote control for you media Center 2005, one that came with your Qosmio g20.

  Open the TV on Media Center 2005 configuration and follow all the steps required for installation.
  You must follow the guide, as is explained in the image you posted:
  http://www.Microsoft.com/windowsxp/mediacenter/using/Setup/SetTop.mspx

  If you have all these cables, you can use the Qosmio player to watch TV. It is not tied to windows OS.
  Here, simply connect the coaxial cable and let the Qosmio player search for available channels in your area. Qosmio player has the opportunity to set the colour TV system in any part of the world. all NTSC regions in all PAL regions.
  If you have the remote control for your Qosmio, TV keys will work directly with the Qosmio remote sensor on board, without needing the external sensor of Microsoft.

  I hope this helps you
  Francisco

• Need adapter antenna TV for Qosmio G20

  Hi - I am in desperate need of a lead/adapter that will allow me to connect a regular TV antenna wire to my Qosmio G20. Can anyone advise where they can be purchased from - I looked on the Options website - and maybe lack of what is obvious - but I can't find one.

  Any advise appreciated. Thank you.

  AFAIK almost all port a TV SCART at the rear and adequate cable SCART is comes with Qosmio G20.

  Please also check this http://www.maplin.co.uk/Module.aspx?ModuleNo=33050

• New disk recovery is required for my Qosmio G20

  Dear Sirs,

  I lost my suitcase which included my recovery disc and cables...
  Can I have another pack of accessories delivered to me on my costs?

  I am facing serious questions about Qosmio G20 with Media Center 2005 and think I'm ready for a clean format and re-configuration!
  All the answers?

  Tarek Tarabichi
  QOSMIO G-20-141
  Series: NO36755341G

  Hello Tarek

  Please check this page https://backupmedia.toshiba.eu/landing.aspx
  I hope that you can order the new recovery media there.

  Good luck!

• Qosmio G20 - 114 - I'm looking for an antenna adapter part number

  I just bought my Qosmio G20-114
  Bought 2nd hand from ebay.
  I love it, but I have only 1 problem

  The Coaxial cable that comes with his new, the seller had not got her.
  I rang toshiba and they put me through their parts department in the United Kingdom and I asked them about the part and they said they have, but...
  they can't post in Ireland.

  So all I need to know is the number of part im looking for.
  Its the cable that connects to the Tv tuner on the back of the laptop

  Thanks in advance

  Pajo

  > I banded Toshiba and they put me through their parts department in the United Kingdom and I asked them about the part and they said they have but... they can't post in Ireland.
  Why didn t ask you a reference number if you have already contacted the Toshiba in the United Kingdom?

  I think that there are also some FSA in Ireland who are able to order this part at Toshiba.
  Therefore, you should contact the ASP in Ireland and they could order directly in such part of Toshiba.

  Welcome them

• Qosmio G20: How to disable/bypass SCMS-T for adiosyn with a bluetooth headset?

  Hello all,.

  I recently bought a set of bluetooth stereo headphones (Creative CB2350) and found that, because of the inclusion of SCMS-T copyright protection I can't audiosync directly to my computer laptop bluetooth stack (Qosmio G20). The headphones come with an audio jack adapter (bluetooth transmitter), but it runs on a single AAA battery and cannot last more than an hour; So I need to connect without it.

  Is there a way to disable or circumvent the requirement for protection by copyright SCMS-T in the last toshiba bluetooth stack? and if not why not? I paid a lot of money for my Qosmio and my helmet and I'm leaving furious inclusion deliberate software/firmware designed to keep me from using my material for legitimate purposes (i.e. what they were designed to do).

  Please help me,
  Lee ([email protected])

  PS: Frankly I didn't really a problem with DRM technology before that, but now I can see how irritating and pointless DRM is. Compare the number of people using bluetooth devices for piracy (negligible) number of bluetooth headset that does not support the MAN - T (a lot if all my google searches are anything to go by) and see you how stupid the idea of DRM via bluetooth is really.
  In my opinion not so humble large commercial companies like toshiba should woven converluted pap as SCMS-T as a matter of appeal; the final user does not want to spend several years download licenses and scouring the web only to find out access to his material is totally useless. (Sorry for the rant, but that's how I feel).

  You're right, I completely agree with you.
  The problem here probably that Toshiba is a little anxious summer continued in the music industry, if users use technology to copy copy-protected music.
  I think that it should be possible to transfer the responsibility of the end user by some sort of agreement, that the user must confirm once by a mouse click during installation.

  I already had a discussion with Toshiba customer service on this issue. They informed me that they reconsider this issue and try to find a solution for this. The odds are so good
  that a future version of the BT-stack will be the ability to disable the GUY.

• Qosmio G20: How to make a dual-boot?

  I have three partitions on my Qosmio G20.
  I run WinXP on one and use a larger data.
  The third partition is able to run Vista in (whenever that will happen).
  I did it on other PCs with a RAID-0 configuration, but which required a floppy with the RAID driver during installation.
  There is no floppy on the Qosmio, so how can I work around this obstacle?

  concerning
  Olav

  Hello

  Usually the Windows operating system offers a clean startup application.
  You should get a boot order (manager) automatically if you have installed two different systems on the device.
  But nevertheless you can use also 3rd party applications

• Qosmio G20-139: What cable I need to connect a 5.1 system speakers?

  Hi all

  Does anyone know which cable or connector, I need to connect my Qosmio g20-139 to a 5.1 system speakers?

  I searched the forum and it seems that someone has used a "optical cable Toslink" - check link below:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=3665

  Anyone successful with this? Can someone please give me a link to a place I can buy something that works? (I put 'Toslink optical cable' in google and it gives like 1 million different things!)

  Thanks for your help.

  Chris

  Hello Chris

  I found a useful site on the required cables.

  Check out this link.
  http://www.mycableshop.com/2nd_Cat/Toslink.htm

  You wondering where you can buy these cables. I put t know you came but I m sure that every good PC or reseller of audio accessories can sell you these cables.

• Qosmio G20-115: TV Tuner missing 1 or 2 channels

  Hello
  Our qosmio g20 tv tuner missing 1 or 2 channels, I would understand if he did not get the channel with bad reception on our normal tv, but the channel is missing is one of the clearest of cases.
  I did the scan twice and still no luck.
  We have come an antenna on the roof and its been verified by a proffesional person and is in perfect order.

  Anyone got any ideas on how to solve this problem?

  In this forum, I see many people who have problems with the reception of the G20.
  I can watch all English channels, but the quality is very poor.

  If you use the G20 as a desktop like me, forget the G20 tv tuner and buy a freeview box (35-40 pounds).

  "I get wonderful images of a free box satellite with a satellite dish, via s-video-in port"
  and also, wonderful images of a "digital terrestrial DTT box" with a normal antenna, via the "monitor-in port.

  If the antenna works fine with digital transmissions that are notoriously more difficult
  to receive, it would be essential to correctly receive analog transmissions and, in my case, this is true for a normal TV,
  but it is not true with the G20 TV card!

  Is possible that you need an adapter "SCART to RCA", depending on what output a your decoder.

  I can jump a decoder / to another using the utility:

  "All the programs/TOSHIBA/utilities/image Enhancement Utility.
  then I click on: 'Parameter input monitor' and I can choose: "Monitor-in" or "S-video-in.

  The G20 is a wonderful machine with a beautiful screen, but in my opinion, he has a weak tv card.

  Good bye

• How to install driverupdate LAN for Qosmio G20?

  In response to an alert from Toshiba, I downloaded an updated their site driver LAN driver. I can not find, however, any info on how to install it despite the statement on the website info would be on this site or in the downloaded file.

  No icons probably looking in the file to produce anything. Any suggestions on how I might proceed? I have a Qosmio G20 (PQG21).

  You'll have to do it the manual way:

  (1) unpack the contents of the downloaded lan - xp - 80430.zip file to a temporary location as c:\landriver
  (2) open the control panel and double-click the system icon
  (3) in the brand-new "System Properties" box click on HARDWARE on the top bar
  (4) now, click on 'Device Manager' and a new box will appear with several tiny icons.
  5) click on the "Network adapters" icon and select your Lan card (.. .should say something like INTEL and 100)
  (6) right click on the entry of Intel (r) and select "UPDATE DRIVER"
  (7) now follow the instructions in the "Update Wizzard'...

  (x) No, not this time---> NEXT
  (x) install from a list or a specific location---> NEXT
  (x) do not search, I will choose the driver to install---> NEXT
  (x) have Disk---> NEXT

  (8) where it is said: "copy the Builder files from" you must NAVIGATE to the folder you created in step 1 (c:\landriver)
  (9) now choose 'E100b325.inf' If you are running Windows XP OR E100ant5.inf if you are running Windows 2000 [choose the option for Windows XP]
  10) confirm with [ok] in the event that a box will appear telling you that the drivers are not certified by Windows, blah blah blah
  (11) reboot if your computer ask

  I don't think its necessary to update your LAN driver unless you had problems with your network adapter.
  I have described the procedure of a manual update which is exactly the same for each device. I can't
  confirm if these drivers work on your computer, even if they should according to INTEL.
  If you face problems to use your LAN card after the upgrade of drivers, do not hesitate to roll back to your previous settings... but for the moment let's hope we don't need to explain how to do this. ;)

  Good luck

  chain

• Install Windows 7 on Qosmio G20

  Hello everyone, I have a Toshiba Qosmio G20 - 102 model: PQG20E

  My operating system is Windows XP and iam trying to install Windows 7, when I run the Setup, choose "Custom Installation" (I can not choose the form of the option 'Upgrade' XP to 7), but when iam supposed to choose the drive I install windows, I get this message:

  "Windows cannot be installed to this disk. Windows needs the driver for device [TOSHIBA RAID]. Click on "Load Driver" and load the required device driver. »

  I tried to update the driver, I tried searching on the internet, but with no use, I'd appreciate it really if anyone can help, thanks :)

  Hello Ahmed

  In general I put t if it is good idea to install Win 7 on this old notebook. OK you can try it but I fear that you will not be able to find the right drivers for it, especially some specific Toshiba m.

  As you probably know, Toshiba doesn't support this model of laptop to Win7, not even for Vista so the history can be quite complicated.

  Anyway, you can try to load THE RAID driver. You can find it in the KR10N folder.

  Load it using the floppy or USB key. I put t know if it will work, but you can try it.

• Qosmio G20-118: Questions about playback of movies, TV, bluetooth

  Hello.
  people I m not very good with computers and need your help.
  my mother gave me a qosmio g20-118 and I have some problems with it (never liked laptops that much, but this one is beautiful ;):)

  1st - when watching dvd movies, I observe that when it comes to an image of the sky or clouds, I see dots on the screen. This happens also with you guys? could this be a problem in high definition? Even on the film "nilo" which comes connected to media player... when it comes to an image of an egypsian walk to the horizon on the stones... If you look at the blue sky, the definition is not so good... Why is this?
  Despite this problem watching movies top it s super...
  all what I can change to make it better?

  2nd - I ve tried to watch TV and I can´t. I m Portuguese and have cable TV. from what I ve read the only thing I have to do is conect the cable antenna to the computer with the adapter tv right? It is a message that the signal is weak. can someone help me here?
  and how do I adjust a channel? I Don t see where I can grant automatly or manually!
  (maybe a Portuguese user can help me if West one here)

  3. how to use the bluetooth? my cell phone has bluetooth and when I turn on the bluetooth of the phone and activate the bluetooth of the qosmio one of them recognizes anything. I click on "bluetooth settings" and 'new Connection', and I got a message saying bluetooth is not ready. What should I do?

  If someone could help me that would be great. Sorry for the big testemonial; 9
  Susana

  [Edited by: admin on 14 January 06 08:16]

  Hello

  First of all, you are right. This very nice laptop s. I wish I would have a.
  Good on your problems:

  1.), you should try to change the display resolution. It would be very interesting to know if the black dots remains on the screen. In addition, I put t think that it s a pixel dead issue because you don t have problems if watch you movies.

  2.) have you used a Qosmio Player or a MCE? You should try to start the Qosmio player and try to launch a new search for TV channels. In the manual, you will find a detailed description of a connection and the use of the Q drive

  3.) have you activated the Bluetooth with FN + F8 key combination?
  Please check this post how to use a Bluetooth device:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5710&MessageID=19581#19581

  Good bye

• Qosmio G20: XP Installation disk & SATA USB

  Hello

  I have Toshiba Qosmio G20 and I have the following problem:
  When I try to install new windows using the SATA drivers via the floppy USB drive as a process of installing classic XP SATA drivers are needed 2 times:

  First time as usual, you will need to press F6 to specify drivers via the USB floppy drive, that this is no problem. The works of diskettes.

  Afterworlds it is the second time that when the same SATA drivers are required from diskette (drive A :). After the selection of the 1 install Windows XP blue screen 3 options, before the first reboot. The installation starts copying the files required for the instillation process and asks AGAIN COPY THE SATA DRIVERS for more usage of the system.

  On this stage the USB Floppy is see inaccessible computer cant that it has USB floppy A:.
  So I can't continue with installing XP because for the next reboot is no SATA driver and no hard drive is detected.

  I tried this several ways and several versions of XP Setup, but the same result.

  Please tell me how to fix the problem will be updated firmware available which can see the USB floppy plugged into this scene.

  Kind regards
  Konstantin

  Hello

  Did you install the RAID driver?
  Well, I put t know if it because of this problem, but as much as I know the Toshiba RAID driver must be added during the installation, when prompt to 'press F6 if you need to install a third-party RAID or SCSI driver.

  To do this, please download the Toshiba RAID driver from the web page of Toshiba driver download and extract the zip to a disk file. Connect the floppy drive to your computer before starting the installation.

  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for XP or 2000 as required.
  Press 'Enter' to continue the installation.

  When you use Windows Setup to partition or format the HARD drive, the RAID driver is deleted in the process.

  Please tell me if you have resolved the problem.

  Best regards

• Qosmio G20 - could not get the video to display on the LCD screen

  I have a laptop Toshiba Qosmio G20, running Windows XP MCE.

  The DVD player on board isn't sounds very well so I thought I would plug an external DVD drive to expand its use. After a lot of internet research, I finally found how to do this. Here's my setup.

  Using the monitor port I used the adapter 3 RCA jacks. (There is no S-video on the DVD drive and an adapter did not work). I finally discovered that in order to get the image on the screen, I have to use Fn + 4. Now, here's where I'm having the problem. I can't get the video to display on my external LCD. FN + 5 didn't do. The monitor is an I - inc AH191D and is connected by VGA cable. There is no driver other than the one for the VISTA operating system... That is why it is not anywhere in the Device Manager.
  Here are the settings I use in order to have all that shows on my desk, shows on the monitor.

  In Control Panel open to the screen. Properties
  Number chosen 1 - multiple monitors GeForce Go6600 video card...
  Advanced under
  the GeForce G06600 tab,
  nViewDisplay Mode: clone 1 a 1 b
  The main screen: digital flat screen
  Secondary display: AH191

  I also tried using the properties of controls on Toshiba. He says under TV output TV output but gives options of the program, but I don't know what I would use. Any ideas out there?

  Wait I'm confused, if you try to send the output of your external DVD drive in the laptop, and then display the image on an external monitor attached to laptop?

  If you use the DVD player on your laptop, it will be good quality S-video as a signal of low resolution.

  Is there something wrong with the DVD player?

  If it's just the DVD software you don't like, you can download other DVD players. PowerDVD is excellent, its better than WinDVD and other players in my opinion.