AC1900-Nighthawk WiFi Range Extender can be wired in and used as an access point?

Similar Questions

• Apple makes a Wifi Range Extender

  Did Apple make a WiFi range extender to mate with the time Capsule airport?

  A perfect match would be AirPort Extreme... as a Time Capsule is actually an AirPort Extreme with a built-in hard drive.

  A much slower alternative... performance wise... would be an AirPort Express.

• no more WiFi which extends from the airport express and Time capsule

  I have no more WiFi which extends from the express airport and Time capsule.

  and once it worked...

  airportconfiguration-app also works, but the graphic display allows to have a straight white line. now, it's one interrupted...

  Your unbroken lines in airport show connections ethernet utility... broken lines show the wireless connections.

  So it depends on the extend method you used.

  I think at this moment, things are configured wrongly... for some strange reason things happens and elements on a stand-alone basis, return to a default mode.

  The best way to manage it is full factory reset on everything... and repeat the installation.

  I have no more WiFi which extends from the express airport and Time capsule.

  It seems to me that you extend a NON-APPLE router... in this case, your Apple routers must connect by ethernet and create a wireless network. Routers Apple cannot extend the NON-APPLE router wired.

  The express could extend the TC or visa versa... by wireless...

  Then I suggest say us what is the main router in the network?

  You have connected by ethernet to the TC or Express or both?

  If so please reset completely the two elements and try again. Make sure they are in bridge mode... It's the network tab. Router Mode is turned off.

  

  And your wireless tab is configured to create a wireless network...

  Use the same name (SSID) and even the security setting and the password as the main router to network roaming (extend wireless ethernet).

  If the Express and transport CANADA are the same, both will have this configuration... If the express extends to wireless then it should NOT be connected to all the way to ethernet... (sequel to wan side at least) and it will be set to expand wireless on the wireless tab.

• I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again?

  I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again? I bought an old compaq desktop computer, and I want to update.

  It's probably too late because you have unsealed the package, but as you have relatively minor glitch of the material do not have a DVD player, did you use the (free) Windows 7 Upgrade Advisor to determine whether your computer hardware is capable of running Windows 7?

• A WRT160N V3 can be used as wireless access point.

  I have an AT & T's broadband router.  A WRT160N is connected, so I now have Wireless N capabilities.  I have a second WRT160N I want to put in my living room as a point of access, so I can connect my BluRay player and video stream.  How can I configure the second WRT160N as access point?

  Thank you in advance,

  Andrew

  Topic 1. Yes, you can use your second WRT and put in place as a second access point to your network. First of all, unplug the second WRT to your network and wire a computer in one of its LAN ports. Open the web interface at http://192.168.1.1/ on the main configuration page, change the address LAN IP of 192.168.1.1 to 192.168.1.2 and disable the DHCP server. Save the settings. Unplug the computer and connect the cable to the first router on one of the second router's LAN ports. Do not use the internet port of the second router! Now you can use the wireless access point in the second router as access point additional for your network.

  For a wireless roaming the two Wrds with identical wireless settings (SSID, wireless security, etc.) and don't forget to enable the SSID broadcast. Only the channel assignments should be different. Different channels spaced at least 5 avoids duplication of canals. Now your laptop can connect to your network via either WRT and internet through the first WRT. It must also be able to move between the two Wrds without losing the connection.

  Re 2. Because the WRT160N has only the ethernet 10/100 ports a CAT5e cable should do. Of course, you can consider getting a better cable, for example a cat6 for future enhancements to your network. It depends on how much effort it is necessary to replace the cable later if you decide to go for gigabit ethernet on your local network.

• Can I find out if I had to buy the Adobe Creative Suite 6 Design & Web Premium, but I subscribed to photography CC for only one month plans, can I unsubscribe it and use the one bought instead?

  Can I find out if I had to buy the Adobe Creative Suite 6 Design & Web Premium, but I subscribed to photography CC for only one month plans, can I unsubscribe it and use the one bought instead?

  I subscribed to the creative cloud only because I did not know that my College courses will be using other software too.

  I hope to unsubscribe to the creative Cloud version and use the purchased instead.

  But if it is not possible, I'll just use the CC version for this year and use the one bought on my other PC.

  Hi, NGOs,

  Yes, if you intend to use CS6, you can still use it after the cancellation of the plan of the CC photography, you can also improve your plan to plan photography to Creative Cloud applications

  If you wish to cancel your plan well photography please contact support by calling/chat for cancellation requests and billing queries:

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_cancel-your-memb ership_stillNeedHelp

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

  He hopes to help!

  Rayyan

• Intel WiFi Link 1000 bgn @ E220s: visible, but will not connect to access point

  Hello

  just got my new E220s - love it! Only problem is that I can see the wireless access points, but whenever I try to connect to them it says: "Windows could not connect to '.»»

  My setup is a Lenovo TinkPad E220s: Intel Core i5, Intel WiFi Link 1000 bgn, Bluetooth 3.0, 7200 RPM 320 GB HDD, 4 GB RAM, Windows7 Home Premium.

  My system is up to date with regard to the update of Windows and Lenovo BIOS update.

  * A tried to connect to a FritzBox 7141 (b, g, g ++ standards)

  * with WPA - PSK: entered the password-> problem as above

  encryption-> problem as above

  * Connection I tried with 'eduroam' (wifi popular education in the world)-> problem as above

  * Using the driver Lenovo 14.0.1-> problem as above

  * Manually install driver Intel 14.1.1.3-> problem as above

  'Manual Diagnostic tool' Intel:

  * test hardware: past

  * pilot: past

  * radio test: past

  * scan test: past

  * association test: failed

  * other tests: does not work

  Some diagnoses more Windows:

  Details about network adapter diagnosis: Network adapter Wireless Network Connection driver information: Description . . . . . . . . . . : Intel(R) WiFi Link 1000 BGN Manufacturer . . . . . . . . . : Intel Corporation Provider . . . . . . . . . . . : Intel Version . . . . . . . . . . . : 14.0.0.113 Inf File Name . . . . . . . . . : C:\Windows\INF\oem14.inf Inf File Date . . . . . . . . . : Tuesday, November 09, 2010 8:43:32 AM Section Name . . . . . . . . . : Install_MPCIEX_Lenovo_1000_HMC_BGN_WIN7_64 Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0084&subsys_13158086 Instance Status Flags . . . . . : 0x180200a Device Manager Status Code . . : 0 IfType . . . . . . . . . . . . : 71 Physical Media Type . . . . . . : 9

  Hello

  Problem solved. Of wire antennas was not of all attached to the card and the other it has established relationships by chance. It took me 3/4 of an hour to turn off the battery, remove the keyboard, attach wires to the NIC (quite difficult due to lack of space) and put it all together. Then everything worked fine.

  Thanks for the help, forum!

  E220s rocks!

• cannot print wireless to wireless using a but access point wired printing (pc) wireless technology is very well

  I have a HP OfficeJet 8600plus N911a CM749A # product who has problems in this impossible to print wireless to wireless using an access point but Wired print (pc) wireless technology is fine. We have 4 pcs in a network cable that work very well try to print to the printer which is connected wireless. They installed the software and discovered the printer very well. When you try to install the printer on a Win8 Tablet and a laptop Win7 that neither would discover the printer, so I have two devices connected by ethernet cable and ran the facilities in the same way as the PC and installed everything and worked fine. But, after I disconnected the wire and reconnected or the other device wireless again (they go OK so I know that they get an address) when I go to print to the 8600 it says there is no communication to the printer. BTW, I can install (and installed) other (cable) HP printers on the network as the computer laptop and Tablet AUTODECOUVERTS and print... Yes, ideas on why it loses its Wireless communication to the wireless printer. He turns a few odd Protocol or discovered that did not pass on a wireless system?

  Thank you for answering my question and I wanted to know was the brand of the router.  I suggest making sure the router firmware is up to date as well.

  Here is a link to a post I did on the various ports used by HP printers for reference.

  -Incoming and outgoing Ports-

  So all your work computers don't encounter this issue?  Once again, while in the router, verify that wireless isolation is not activated.  A question also, I do not see has anti-anti-virus/firewall you had on your main computer that you are using?  Maybe it's not the cause, but that depends on the software, too.

  -Security and Firewall.

  You have all the exclamation points in your device manager?

  Let me know what is happening when you try another access point.

• Can I have and use alternating, 2 browsers on my computer, or can I only have and use a?

  I have Internet explore and I am thinking to change to something else, but do not want to remove it before testing other browsers. I can add another browser on my computer to test while I also keep and use Internet explore?

  Yes, you can install any number of web browsers you want, you can have running at the same time.

• Why can't just open and use files Z5 for a text called 'The Theatre' adventure game?

  I'M in TRAIN OF DOWNLOAD AND USE FILES/PROGRAMS to PLAY TEXT ADVENTURES ESPECIALLY ON CALLED 'THE THEATRE' [A TEXT ADVENTURE USING A z5 FILE HAD each time I HAVE TRIED TO OPEN AND RUN IT I KEEP GETTING THE MESSAGE WINDOWS don't IS NOT RECOGNIZE this TYPE of FILE. ANY HELP PLEASE.

  To simplify things, download and install the Windows version of
  http://www.ifarchive.org/if-Archive/Infocom/Interpreters/Frotz/WindowsFrotzInstaller.exe

  I just tried and, once installed with all the default options, you can double-click a .z5 file to launch the game and interpreter.

• I replaced the hard drive in my system. How can I reinstall Windows and use my key to activate it?

  Vista operating system software

  I have a HP laptop running windows vista.  The crashed(non-recoverable) of hard disk and I have replaced the material.  I have a valid license key of Vista code and would like to know if I can download vista and use my codekey to activate it on the original laptop which has windows vista sticker Home premium OEMAct on the back.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact HP and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://h20566.www2.HP.com/portal/site/hpsc/public/help/contactHP/home/?AC.admitted=1340852823523.876444892.199480143

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Adobe creative suite 4 design premium oem can it be installed and used with windows 7

  can adobe creative suite 4 design premium oem be installed and used with windows 7

  I think that CS4 was written for Windows XP, the only way you will know is to see if the installation works for you

  You may need to right-click on the EXE and select Windows XP compatibility mode in the options window

• Can I download, activate, and use Adobe Cloud on 2 SSD on the SAME computer?

  Hello-

  I have an Early 2009 Mac Pro with two separate disk with operating system drives bootable. A bootable disk drive is for general use.  This disc also contains the program Adobe cloud and all downloaded programs. The other (new) disk drive is ONLY dedicated to my audio and video programs and is kept clean and well optimized. However, I still have to download Adobe Cloud on it. So here's my question. Can I store and use Adobe cloud and all its programs on TWO startup disk drives located on the SAME computer? Obviously I can only boot to a hard drive at a time. (Eventually, I'll remove Adobe Cloud & programs on the bootable disc General once I am convinced that everything is installed and configured correctly on the second, devoted by car.)

  Thank you.

  Number of activations of CC is based on the Machine ID & the Adobe ID, with which it is connected.

  So, I think that if the machine ID is same & Adobe ID is same so you can use CC on even 2 SSD from the same computer.

  It would be preferable to the expert opinion by contacting the Adobe Support via Contact Customer Care.

  Concerning

  Baudier

• Netgear RangeMax Wifi Range Extender 802.11 wireless router g

  ALrighty, I had used this router just fine with my WHS v1 and now I'm upgrading and aging...

  Hi BryantThompson,

  Since you are facing problems with Windows Home Server, it would be better suited in the WHS forum. Please post your question in the next WHS forum to improve assistance:

  http://social.Microsoft.com/forums/en-us/whshardware/threads

  Please provide as much detail as possible about the question when you ask the question in the WHS forums.

• If I give someone a phone without a SIM card can they add their and start again without access to my information?

  I have an iPhone 5 c which needs repair and no will power not to be able to restore the phone to factory settings.  If I give the phone a friend and remove my SIM card they can place their SIM card in the phone once the repair completed and turn the phone on without being able to access my information again?

  Thanks to anyone who can give any help with this

  Hello

  Go to find my iPhone on your pc or another apple device, click on the list of devices

  Delete iPhone list which will remove your Apple, I got what you want to give the iPhone.

  Then it can be put in place by the new user after repair.

  See you soon

  Brian