AC5300 and AC1200

Similar Questions

• LAN/WAN ports not supposed to be Gigabit? Capped at 250Mbps, NOT because of the ISP LAN devices.

  Hi all

  Have a bit of a problem here. I have Internet Fiber-to-the-home (FTTH) with Bell Canada and have their Fibe Gigabit service which is 940/120 speeds up and down, respectively. I was able to bypass his combo modem/router using a switch connected to the optical network terminal (HAVE) where the fiber cable enters the House (which serves mainly my base modem) and using custom settings of VLAN and DNS in ports specific for my fiber IPTV service Bell and receivers work together through my router.

  So, I have a few routers that I tried this with to try to solve my problem. My Asus RT-AC5300 and others have no problem with having me my subscribed speed - certainly through devices connected to gigabit LAN and also via WiFi on compatible devices. But I'm not concerned about WiFi - it is specifically wired ethernet devices that are the cause. I use CAT5e and CAT6 cables only because he is a Gigabit connection. The issue I have with my Time Capsule (3 to, latest model AC) is that, literally, speeds for gigabit wired devices will not exceed 250Mbps downstream. Download speeds can hit 125Mbps without problem. Why is this? Is there something my Time Capsule prevents leave the LAN ports operating at gigabit full transfer speed? It is not only a device - I have multiple gigabit devices I tested, on all three of the TC ports, and none of them exceed 250Mbps. Yet when I connect them to another router gigabit, such as the Asus I've described but also others, they have no problem hitting 900 + Mbps downstream on the exact same network configuration and Setup at home.

  Thanks for any ideas, comments or suggestions. Y at - it a setting I have accidentally enabled that is the cause? I had much rather use the TC of the most convenient airport for my network I was planning on getting multiple Airport extreme to position around the House to cover literally home WiFi and LAN bridges through the simple installation of these devices, but I do if I can't use my fiber subscribed speed.

  OR maybe I have a defective unit. Thanks again for the help!

  See you soon

  The issue I have with my Time Capsule (3 to, latest model AC) is that, literally, speeds for gigabit wired devices will not exceed 250Mbps downstream. Download speeds can hit 125Mbps without problem. Why is this?

  Apple AirPort routers have been designed to work with the cable standard and DSL connections.  The fiber is the new ball game, and Apple knows yet how to play the game, let alone to understand the rules.

  Most of the problems associated with connections to high speed on airports is a result of the decision of Apple to eliminate any kind of manual settings to manually adjust the speed of the WAN port on the router... and are based rather on an "Auto" setting.  Automatic adjustment seems to work pretty well on the fiber up to approximately 100 Mbps connections, but the WAN port is struggling to negotiate with high-speed connections when it is connected directly to the fiber. LAN ports can also be affected.

  Some users have reported that insert a Gigabit switch between the connection of the fiber and the Time Capsule or AirPort Extreme has helped with speeds. The theory here is that the switch can negotiate with the fiber connection much better than the WAN port on the Apple device.  If you have a handy Gigabit Ethernet switch, that it could not hurt to try this "Workaround".  Other users report no benefit when they try it.

  Yet when I connect them to another router gigabit, such as the Asus I've described but also others, they have no problem hitting 900 + Mbps downstream on the exact same network configuration and Setup at home.

  The time Capsule is not directly connected to the fiber connection, so it OK to talk and negotiate with what he sees as a 'normal' a conventional router connection.

  Don't forget also that the 802.11ac products were designed before 2013. Current products have not changed since their introduction in June 2013.

  The bottom line... Apple needs to decide whether it wants to be an actor, or leave the routing other players company established. Such what, Apple is far behind the curve... my opinion.

  While it might not hurt to take the time Capsule to an Apple Store to check over the machine, you might want to ensure that they have in fact a fiber connection high speed to test.

• Access the 4th generation Time Capsule data remotely in Mac and PC

  Hi all

  I intend to log in case Apple support, but my Service and Support coverage is already expired > _ <.

  Apple PC does not support mobile devices like IOS or android, so in this top, I'll focus on Mac and PC.

  Appreciate if you guys could give me advice on how to set it up properly.

  Material and Configuration:

  -ASUS RT-AC5300

  Firmware version: last 3.0.0.4.380_3341 - g25420f5

  IP: 192.168.1.1

  -Configured Port forwarding, Port 548 to 192.168.1.85 in ASUS router

  -Time Capsule from Apple 4th generation (Firmware version: 7.6.7 last)

  IP: 192.168.1.85

  -Cable for direct LAN connection between TC Apple and ASUS router

  I can access my Apple TC LAN for PC and Mac (for PC, installed the Base Station Agent from the airport, for Mac, I access it via the Finder with credentials for password)

  Tried several times to set the TC to be able to access remotely to both Mac and PC platform, also read many articles, no luck.

  Grateful if someone here can guide me on how to configure it so that it works correctly.

  Screenshots below for Apple TC settings:

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/base%20Station.PNG

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/Internet.PNG

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/wireless.PNG

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/network.PNG

  http://i2.Photobucket.com/albums/Y25/TerenceNHK/Apple/disks.PNG

  Thank you very much!

  Kind regards

  Terence

  In your Mac, in the finder, use Go, connect to the server.

  Type of AFP://yourpublicIP

  Download your public IP address of the router asus news... remote WAN you should use DDNS... iCloud is useless... disable in the TC... It does not work behind another router for most people.

  But you must use the public IP address or DDNS address... It is available in the Asus firmware. Best is to buy a static public IP address from your ISP... This is the only reliable method... is worth a bit of money on a dynamic IP.

  This is unnecessary for Windows computer... Access SMB is usually blocked by ISP and Windows does not support AFP.

  Please post your pictures directly here... It's so much easier, then, for us to see.

  

• AC1200 Driver Windows 10

  Hi, I read on your driver support page to check back frequently to make the point about the drivers for windows 10. Is there progress on a compatible driver for windows 10 for the adapter USB of AC1200?

  Thank you.

  There are 10 Windows drivers for two models A6200 and A6210 USB adapters on each page to download the respective product on the site of Support of Netgear. I guess these are the models that you ask the subject.

  Windows Netgear 10 support Page:

  http://KB.NETGEAR.com/app/answers/detail/A_ID/29490/~/NETGEAR-product-support-for-Microsoft-Windows-...

• ac1200 / powerline

  How compatible is the AC1200 with a power adapter holder online. need to get a wi - fi connection down to my shop and thought with a powerline adapter and connect the AC 1200 Extender to it.

  Yes EX6200 AC1200 / EX6150 / EX6120 / EX6100 work

• MU-MIMO AC1200 soon?

  Anyone know if linksys will soon release a version AC1200-MU-MIMO a Wireless USB adapt? They have AC600 of MU-MIMO but not a 1200. Only AC1200 is not MUMIMO. I have the EA8500 and I would like to take advantage of MUMIMO technology. Don't want to get the AC600 if there is a time would help to frame that is early for an AC1200 news! Thank you!

  Use the adapter AC600 Mu-Mimo, and I said that the experience is swell. Much better than the experience on the non-mu mimo AC1200 (WUSB6300), which i also have.

• Supported network Linksys WUSB6300 and hosted

  Hello *.

  I just had "nine" Linksys WUSB6300 AC1200 Wireless-USB AC adapter and want to configure it to access point WiFi. However, when I run the below command, I got an error:

  C:\WINDOWS\system32>netsh wlan set hostednetwork mode=allow ssid=WiFi-AP key=Pa77w0rd
  The hosted network mode has been set to allow.
  The SSID of the hosted network has been successfully changed.
  The user key passphrase of the hosted network has been successfully changed.
  
  C:\WINDOWS\system32>netsh wlan start hostednetwork
  The hosted network couldn't be started.
  The group or resource is not in the correct state to perform the requested operation.
  

  Further research led me to:

  C:\WINDOWS\system32>netsh wlan show drivers
  
  Interface name: WiFi
  
      Driver                    : Linksys WUSB6300
      Vendor                    : Linksys LLC
      Provider                  : Linksys LLC
      Date                      : 10-12-2015
      Version                   : 1030.3.831.2015
      INF file                  : C:\WINDOWS\INF\oem39.inf
      Files                     : 1 total
                                  C:\WINDOWS\system32\DRIVERS\rtwlanu.sys
      Type                      : Native Wi-Fi Driver
      Radio types supported     : 802.11n 802.11g 802.11b
      FIPS 140-2 mode supported : Yes
      802.11w Management Frame Protection supported : Yes
      Hosted network supported  : No    Authentication and cipher supported in infrastructure mode:
                                  Open            None
                                  WPA2-Personal   CCMP
                                  Open            WEP-40bit
                                  Open            WEP-104bit
                                  Open            WEP
                                  WPA-Enterprise  TKIP
                                  WPA-Personal    TKIP
                                  WPA2-Enterprise TKIP
                                  WPA2-Personal   TKIP
                                  WPA-Enterprise  CCMP
                                  WPA-Personal    CCMP
                                  WPA2-Enterprise CCMP
                                  Vendor defined  TKIP
                                  Vendor defined  CCMP
                                  Vendor defined  Vendor defined
                                  Vendor defined  Vendor defined
                                  WPA2-Enterprise Vendor defined
                                  WPA2-Enterprise Vendor defined
                                  Vendor defined  Vendor defined
                                  Vendor defined  Vendor defined
      IHV service present       : Yes
      IHV adapter OUI           : [00 e0 4c], type: [00]
      IHV extensibility DLL path: C:\WINDOWS\system32\Rtlihvs.dll
      IHV UI extensibility ClSID: {6c2a8cca-b2a2-4d81-a3b2-4e15f445c312}
      IHV diagnostics CLSID     : {00000000-0000-0000-0000-000000000000}
      Wireless Display Supported: No (Graphics Driver: No, Wi-Fi Driver: Yes)
  

  As you can notice that a

  Hosted network supported: No.

  How can I activate it?

  P.S.: I already followed a tutorial, but without success.

  P.P.S.: As I see it in the device (C:\Windows\System32\drivers\rtwlanu.sys) Manager, the chip is Realtek WLAN USB NDIS Driver 40116. Suspects are here: http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PNid=13&PFid=21&Level=4&Conn=3

  But we don't know what chip. Therefore, I don't know if there is a newer version of this driver, which can support this future.

  Thank you

  Seems useful, but I need for my project for windows platform. I prefer cisco or linksys, but for faster result I stept over another provider...

• ac1200 adapter not to hit speeds

  Hello. I have the Linksys Dual - Band Wireless USB 3.0 adapter AC1200 (WUSB6300) connected to my pc. My wireless router is AC1600. My speed is showing 348Mbps 5, but according to the specifications, that I should be in 867 and the speed, I am currently is more what is the 2.4 ghz. Any info is appreciated.
  Thank you very much.

  5th = 5 GHz

• AC1200 + router is not connecting to internet

  My ac1200 router + is unable to connect to the internet via a modem. The activity led light on the internet port of the router and the modem are, but not flashing do not. I am able to connect to the router and the program installation/change settings. Also, I am able to connect to the internet when I connect the modem directly to the computer. I tried troubleshooting on page settings on the router and the Windows network settings, but nothing works so far.

  I appreciate any help or advice that someone is able to provide.

  Hi, ibdodger. What is the model of your modem? To configure your router with cable Internet service, click this link.

  Kind regards

  Ethel_10700

  Linksys technical support

• EA6350 AC1200 + cannot connect to Internet

  Hello! I just wanted to ask if you could help with this problem

  I just bought the EA6350 AC1200 + Wifi router. I tried to configure the router in the same way, step by step the instructions tell me and the Wifi is always telling me that it does not detect any internet connection.

  Whenever I have to connect to the Smart Wifi Menu, the screen told me that there is a connection between the computer and the router, but not with the internet connection.

  I tried to check if its fault of my internet, connecting just the cable to my laptop and the internet works fine. My internet connection via LAN cable doenst require a login and password.

  Please let me know if anyone can help! Thank you very much!

  nting007

  @nting007

  Reset the default router. Hold down the button reset on the back panel of the router for about 10 seconds, then release. Once done, follow the steps on this link.

• AC1200 ignores the selective signal

  I recently bought a usb network adapter for my pc, well hung and he worked for 3-6 hours. Suddenly, he breaks the connection to only OUR router. If I can catch neighbouring signals but not ours. the router settings seem to be my mac address blocked, if im not a expert in such things, but see nothing obvious in the inspection.

  Also, I can connect a live wire and it works so the router seems to be not blocking me and the adapter seems to work... Yet, I can not catch the signal.

  I am running Windows 7 build 7601 with network linksys ac1200 adapter. The network inSSIDer tool found my network, but after I unplugged my ethernet that it disappeared from the list of wifi available, now I can't seem to find him...

  Notes: I tried to reboot everything and reinstall the connection in the connections stored in the Panel but also reinstalled the NIC driver.

  I tried to connect on a different os (Linux), but it looks that this network adapter is not supported with drivers linux so no luck there.

  None of these tests have nothing. I returned the linksys adapter and got a belkin one to match the router and have not had problems since. Maybe it was a problem of brand compatibility

• Linksys ac1200 iptv

  Hello

  I just changed my router to a linksys ac1200, updated its firmware and entered my country. For some reason any now my IPTV does not work.
  Iptv uses HTTPS and port 8080

  See you soon

  Problem solved I had to just put the firewall of my modem to the top in the Middle after I got the ac1200

• I have an ipod touch 128 GB... but I'm almost to reach its maximum.  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with other copies

  I have an ipod touch 128 GB... but I'm almost to reach its maximum.

  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with the other copies of the other.

  is this possible?

  What should I do?

  Matt

  When you get the new iPod, you can use iTunes on your computer to select and synchronize the music you want on it, in the same way that you synchronize your current iPod - your iTunes will recognize them as different devices and will remember your choice of synchronization for each, it will not (unless, for example, you restore the backup of your current on her iPod) put the same content on both.

  (I asked for your post be moved to the iPod Touch forum, where you have posted is the iPad forum use.)

• Why my notes sync between my Mac and iPhone?

  I have my MacBook Pro with Mac OS X 10.9.5 Mavericks and my iPhone is running iOS 10.0.1 and used to synchronize my notes! Is it because of the huge gap in operating systems? I SHOULD update my Mac to Mac OS 10.10 + for this problem? Thank you!

  In order to synchronize Notes between your Mac and iPhone, you must configure iCloud > http://www.apple.com/icloud/setup/

  But this requires macOS Sierra 10.12, the latest available version and the last iOS available for your iPhone.

• Photos, iCloud and OneDrive sync

  Hi all

  I have a question on how to better organize my photo library.

  For the moment, on my space OneDrive (mapped to a partition on my MacBook SSD), I have a folder called 'Images' containing just about all of my photos and organized by folders.

  Since my tech ecosystem is roughly marked Apple (iPhone, iPad and MacBook), I would use the power and versatility of the Photos and iCloud, so that everything remains in all of my devices and free space memory iPhone sync.

  Here's the question: I want to keep my pictures saved on OneDrive, then put the Photos on my Mac to view photos from this folder and use iCloud to share through my devices.

  -I see the same folder structure on iPhone and iPad a synchronization is complete?

  -More important, if I take a picture with my iPad, it will be placed not only on iCloud but also automatically added pictures on Mac which, in turn, puts it in the folder of photos on my OneDrive?

  -Finally, take pictures of my iDevices will store them in the film. If I move them into folders, photos will be mapped (copied to iCloud) on my other devices constantly (in the folder)?

  I would like to notice I'm not trying to avoid using iCloud premium space - I already have a subscription plan of 50 GB that I don't mind mounted. I just keep having just all my photos on OneDrive.

  Thank you in advance for any comments you may have!

  Paul

  The answer is simply not

  The photo library can not be stored on a basic system to pictures not work will have a referenced library, so you may not have a local library references photos on a disc - the photo library can be on a local drive connected directly to the Mac OS Extended format

  You can synchronize between the Mac and IOS devices using iCloud library that synchronizes the photos and the structure of the album/folder between devices

  When you import pictures you can export them to your OneDrive record and have a copy (not associate Photos somehow) on a disk

  You can not have the same physical pictures in Photos and on one disc - each must have its own copy of the Photo

  http://www.Apple.com/icloud/photos/

  LN