Access cannot find the macro

Similar Questions

• I am running xp sp3 and cannot find the movie maker software in the all programs list, how can I access this software application

  original title: access to Movie Maker

  I am running xp sp3 and cannot find the movie maker software in the all programs list, how can I access this software application?

  You are welcome and thank you for the comments.

• Cannot find the specified device, path, or file. May not be the appropriate permissions for access you.

  Hey everybody,

  I was running Windows vista professional for more than 2 years yesterday, I formatted my hard drive and reinstalled vista prof. (entirely new, different CD key). Everything works very well excenp for one thing - I had saved some of the programs and files on my external hardrive before formatting my laptop. Now, when I try to access these files I get the following msg-"cannot find the specified device, path, or file." You don't have permission to access them. ".
  I am logged in as administrator.
  
  
  Help, please. I reallly need the files.
  
  
  Any help would be appreciated.
           

  Hey Jihirshu,

  It looks like permissions.

  Try this on one of the files on the disk to see if it allows you to copy the files.

  1 right click on the file, then select Properties
  2. click on the Security tab
  3. click on change, in the name box, type "Everyone".
  4. in the boxes next to the permissions below, put 'Total control' for everyone
  5. click OK, and then close the dialog boxes
  6. try to copy the file that you just modified.

  If the works above, you must change the permissions on all the files you want to copy.  Normally, you can just highlight all the and follow the steps above to change the permissions on all files at the same time.

  I hope this helps if you find my answer was what you are looking for, please do not forget to click on the box "mark as answer" below!

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• P1102w - cannot find the printer

  Hello

  I'm unable to print using a wireless connection.

  the printer is p1102w.

  operating system is MAC OS 10.10 Yosemite

  Whenever I try to print something I get "printer is not connected / cannot find the printer" message.

  I tried the solutions on your support site, but nothing helped.

  For sure, printer is connected to the same network as the computer. I see it on the print configuration page and I can connect to its IP address via a web browser (but I can't use web services).

  All software and drivers are up to date. Update Apple is nothing new to me. Niether have your site.

  I tried to move the printer closer and further away from router. No results.

  No web proxy is related to my network.

  To make this work, I have to remove the printer from my system, reinstall it using the USB cable, and then add it again via wi - fi.

  But some time the problem reappears.

  It's really frustrating. Help, please.

  Hi @xopot ,

  I see that you have problems printing via wireless network. I would like to help you today.

  Since you can access the printer embedded Web server, the printer would have a valid IP address. Most likely, it has something to do with the software that the printer uses.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  

  

  Configure a static IP address for the printer.

  The printer is not found during Installation wireless.

  Do not take into account the title. Select the Solution 4: assign your printer a static IP address.

  If you need help, let me know.

  Have a great day!
  Thank you.

• When I perform a net view on, I get the error system error 51 next. Windows cannot find the network path.

  Net 51 with a view system error

  I have two boxes of Windows XP that I login as administrator account. I was able to synchronize files, map network drives and can do a tracert to reach one of them.

  However, when I perform a net view on, I get the following error

  51 system error has occurred.

  Windows cannot find the network path. Make sure the network path is correct and the destination computer is not busy or turned off the coast. If Windows still can't find the network path, contact your network administrator.

  How to make this command work?

  Hello

  ·         Your computer is on a domain network?

  Follow the steps in troubleshooting this article and check if that helps:

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  See also this article that resembles the same error.

  Error when you try to access shared resources on a computer that is running Windows 2000 or Windows Server 2003: "53 system error has occurred" or "51 system error has occurred."

  http://support.Microsoft.com/kb/259878

• Error: "Windows Media Player cannot find the file. If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed or deleted'

  Original title: laptop won't read the music files stored on external hard drive

  I have an old Compaq laptop Windows XP, so it was out of memory I transferred everything on a Portable Seagate (500 GB) hard drive and started to access it. It's worked well for over a year, but lately, began to stop playing my music files. Absolutely everything on the hard drive opens, however, images, files and folders, but when I go into Windows Media Player, it pops up with this error message:

  Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.
  I have not modified parameters or anything that moved. I used to be just able to restart the laptop, or disconnect and reconnect the hard drive and it works again, but now it or not will be not at all, or it will cut off half way through a song and then not to play anything more.
  I can't find any support for this problem because the phone reads that the hard drive is there, and everything else works. Only the music doesn't. I tried to play music on a connected USB and it works fine. I'm so confused!
  Hi lkm0293,
   
  Here are some articles that you might find useful:

  Windows Media Player Error Message help

   

  Error message when you type the name of a file to play with Windows Media Player: "Cannot open file."

• Sometimes the jobs XP in workgroup cannot find the names of the other computers. No idea why?

  There are about 10 workstations XP XP3 in a working group. A computer has a network share and sometimes some workstations cannot access this network share because it cannot find the name of the computer not not because connections reached to the maximum.

  It's because of blocked by switch network ARP requests because the Working Group is big?

  Hi dragos2,

  You can read the following article that should help you to question.

  You can't see the other computers in the workgroup on the network on a Windows XP-based computer

• Cannot find the user profile

  After turning on my computer, I try to connect with our user account. an icon appears and says that the user profile is damaged and there could be a security issue.  the following icon says that it cannot find the profile of the user and that a temporary profile has been put up.  I'm trying to get back access to the user profile because he has sensitive information at the time that must be consulted, photos of family and passwords important programs.  I need to know that if there is a way to restore the user profile and retrieve information, the user profile of temporay gives access to certain programs and software, but not the critics.

  The following procedure, you should get pretty quickly:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Damaged profiles are almost always accompanied with alteration of the disc.  In addition to the above (or sometimes instead of him), a check disk with the /f or/r option is highly recommended.  Note that on a large drive or a drive with a lot of problems this audit can take hours and you cannot use your machine while it is in progress.  In addition, there is a small chance that it may be worse, so now is a great time to update your backups.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Windows cannot find the program to open the exe file

  I did the windows repair option by restarting then pressed f8 to get to come repair options. I did it to try to remove a number of problems of virus on my laptop. It seems that it has solved the problem, but now when I try to access one of my desktop icon shortcuts it indicates that windows cannot find the program to open the exe file. She does it with every shortcut. I can access the location of the program and then select open with and it will be opened in this way, but there is not and I have to select each time. Another option that works is a right-click on the icon and selecting 'start' and who will run the program properly. Other than simply double-click the icons automatically no longer works since I did this repair.

  Windows Startup Repair fixed my problem, but now my desktop icons not properly opens with double-click

  Hello

  You can try to create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  Now search for the question.
  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• "An error has occurred applying security information to:...". The system cannot find the specified file. »

  So, this is what happened:

  I accidentally threw my wife laptop screen and I bought her a new. The laptop seems to be OK, but I couldn't see anything because of the broken screen.
  I bought a pen, took out the old HDD (Vista) and connect it to the speaker.
  Now I'm going through old files from my wife from the old HDD (Vista) on his new laptop (Win 7), but I can't access it.
  So I did a little web browsing and tried the following.
  Logged as administrator, open properties, Security tab, advanced, button tab owner, edit, changed ownership to myself (my wife) and verified replace the owner in the box of submarines.
  And then find a lot of mistakes. Everyone says ' an error has occurred applying security information to:
  Among these errors, half of 'em had "the system cannot find the file specified" and the other half had "access denied."
  In the end, there is a separate error that says: "unable to set new owner (folder). The system cannot find the specified file. »
  I would really appreciate the help.

  Hello

  Did you change your computer?

  I suggest that you first take ownership of the drive once you connect to the computer and check if it works.

  To take ownership of a folder

  (a) right click on the folder you want to take control and then click Properties.

  (b) click on the Security tab, click Advanced, and then click the owner tab.

  (c) click on edit. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) click on the name of the person you want to give to the property.

  (e) If you want that person to be the owner of the files and subfolders in this folder, select the check box replace the owner of sub containers and objects .

  (f) click OK.

  I suggest you follow the links and check out them.

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Error message when you change the security settings for a folder that contains a child object for which you have no access authorization: 'access denied '.

  http://support.Microsoft.com/kb/975702

• Vista cannot load RealPlayer/FireFox message "the system cannot find the environmental option". Any ideas?

  Vista cannot load RealPlayer/FireFox message "the system cannot find the environmental option". Any ideas?

  Hi Magnusopus,

  ·        You receive this message when you use Real player or Firefox?

  ·        You did changes to the computer before this problem started?

  You can try to uninstall Real player and firefox to the computer and reinstall and check if that helps you solve the problem. Access the link below and follow the steps to uninstall the program from your computer.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Subsequently access the links below to download Firefox and Real player and even install and check if it works very well.

  Link to download Firefox:http://www.mozilla.com/en-US/firefox/ie.html

  Link to download Real Player:http://www.real.com/realplayer

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• ipconfig\registerdns... responding system cannot find the path specified__on my windows vista

  When I type the command 'ipconfig\registerdns' and all the commands ipconfig, and then press enter I always get "the system cannot find the path specified" I need help...

  First, you must open the command prompt by clicking on the icon and clicking Run as administrator (if not, you do not have access).

  Second, the command should read ipconfig/registerdns (note the space and the fact that the slash is going the other way).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• AppAssure BMR cannot find the Destination disk.

  I am preforming a bare metal restore material disimillar and Appassure cannot find the drive on the target computer.

  Restore dell Poweredge R430 13g. The discs are in a controlled by a H330 PERC RAID 1.

  Is there something I am missing, usually displays the disc without any problems?

  

  Thanks for the support!

  Inject you the Perc controller drivers in the boot cd when it was created? If this isn't the case, then this is probably the issue.  He can't access the storage controller so he can't see the disks.

• I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work this is the messege I get: the system cannot find the environment that was entered

  I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work. Cannot change network settings. This is the messege I get: the system cannot find the environment that was entered

  Hi kotipelto.

  To better understand the issue, we need the following information:

  Are what environment you referring?  What did you delete?

  Let us know if you can start the computer in safe mode and works as expected.

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Boot advanced options, select the menu safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  If you can start the computer in safe mode, perform the system restore.

  System Restore: System Restore to put the computer's system files to an earlier point in time.

  Search the steps mentioned in the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-sytem-restore

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.