Access denied make sure that the drive is not full or write protected

Similar Questions

• While I'm trying to remove the MPEG-4 file, it says "make sure that the disk is not full or write protected and that the file is not currently in use.

  Original title: When I'm trying to delete file MPEG4, is not deletion. How can I delete file MPEG4?

  While I'm trying to remove the MPEG-4 file, it says "make sure that the disk is not full or write protected and that the file is not currently in use.

  Hello
   
  Method 1: Ownership of the file and then try to delete and see if that helps.
  Reference:
  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421
  Method 2:
   
  Error message when you try to delete a file in Windows XP: "access denied".

  http://support.Microsoft.com/kb/298345

• I want to delete downloaded files 3gpp but massage appears cannot remove access is denied. Make sure that the disk is not full or write protected.

  the files were downloaded

  Hi Azhar_339,

  1. when the files are located on your computer?

  2. do you get this error for all 3gpp files?

  3. have you made changes on your computer before this problem?

  You can follow this link & check if the problem persists:

  Error message when you try to delete a file in Windows XP: "access denied".

  Hope the helps of information.

• "Impossible to copy the name of the file: access is denied." Make sure that the disk is not full or write protected and that the file is not currently in use. »

  I move the data because a Trojan horse snuck in.  I killed the Trojan horse by setting the drive as external and scanning.  However, I could no longer connect to the formerly infected drive. It hangs at the Welcome screen.  So I load XP Pro on another drive and set the old drive as external. I now see data, but get the "Access denied" message that will let me copy the data.

  Or I have to be able to release the data to the new drive or access the old disk by booting to XP.  Now I can't do either.

  I tried to get XP on the old drive, but the Trojan horse seems to have changed the password admin. I then tried to erase the password using a Linux boot disk and it showed the account unlocked, but I always block to the Welcome screen.

  Ideas appreciated.  I can't move forward until I can get the data off. THX K.

  Karen Girrl
  Thanks for posting with us.  The article below describes taking possession of folders\files.  You may need to go through these steps, if malicious software has modified the permissions on your old drive.
  http://support.Microsoft.com/kb/308421

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Original title: remove unnecessary files

  I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Ditto for PCFIX.exe.

  How can I remove these and clean unnecessary files? Thank you.

  Hello

  1. how exactly you are trying to remove it?
  2 have you connected the administrator account?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Take possession of these program at the following location folder, and then check the issue. C:\Program Files\ 

  Reference: How is ownership of a file or a folder in Windows XP

• Cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.

  When I try to backup Quicken, I received the error: cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.  My last backup of Quicken was 16/07/2010.  I don't know why I can't back up now.  Is there a way to fix this?

  Why not save to a folder on your hard drive and burn them to a CD - R from there? I can't tell from the little you wrote if the problem is with Quicken (not work or you have incorrectly backup location) or with your CD - RW drive. How about more details to work with? This will give you an idea of what to write:

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  MS - MVP - Elephant Boy computers - don't panic!

• Windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu

  Hello world

  I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.
  I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.

  I would be very grateful if you could help me

  Hello

  I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know the results. We will be happy to help you further.

• Windows Live Mail could not be started. It cannot be installed correctly. Make sure that your disk is not full or that you are not out of memmory (0 x 80041161)

  Swithced on my lap top age of 8 months to find that I could not open Windows Live Mail, receive this error message.  Has performed flawlessly for 6 months, disk is not full and no memory.

  Any suggestions?

  Windows Live for Windows Live Experts direct questions here:

  http://www.windowslivehelp.com/

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• Windows Live Mail could not be started. It cannot be installed correctly. Make sure that your disk is not full or that you're not out of memory. (0 x 80040154, 1008)

  What is the solution

  Hi Kashinathkumbar,

  You can check if this Windows Live Mail supports the article helps:

  Windows Live Mail fails to start - cannot open the message store

  If this isn't the case, you must validate your application in the Windows Live Forum to get help:

  Support for Windows Live Mail

  Hope this information is useful.

• Cannot remove make sure disk is not full or write protected

  Get the error message when you try to delete some desktop icons and a few files that says "can't remove...". Make sure that the disk is not full or write protected. "

  using windows xp sp home edition ver3. Cannot remove this things even logged on as administrator

  Hello

  Are what type of files?

  The programs are still installed on the system?

  Have you tried a reboot first, then try to delete icons?

  If the are left by a try to uninstall this program remove doctor 2.3

  and use the delete file then restart, let me know how you go

  http://www.Softpedia.com/get/system/OS-enhancements/delete-doctor.shtml

  Concerning

  GT4U

• Receive the error message "DISC ERROR C:\PROGRAM FILES\MICROSOFT GAMES\RISE OF NATIONS\ART\OPENING WRITING. MAKE sure THAT YOUR DRIVE HARD IS NOT FULL AND THAT THE FILE IS NOT in USE"in rise of nations?

  Original title: rise of nations

  on the rise of nations, I get this error code. How to fix it. DISK ERROR WRITING C:\PROGRAM FILES\MICROSOFT GAMES\RISE OF NATIONS\ART\OPENING. WMV. MAKE SURE THAT YOUR DISK IS NOT FULL AND THAT THE FILE IS NOT IN USE.

  Hello

  
  1. do you get this error during installation, downloading or playing the game?
  2. What is the amount of free space on the hard drive?
  
  Method 1: clean boot the computer and check if the problem occurs.
  
  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135
   
  Method 2: uninstall and then reinstall the game and see if the problem still occurs.
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  http://www.Microsoft.com/games/thronesandpatriots/default.aspx
  http://www.Microsoft.com/games/riseofnations/downloads.aspx
  
  Hope this information helps

• Windows Vista CD problems - "Windows cannot read the disc in the drive E:\. Make sure that the disc uses a firmat Windows recognizes.

  Original title: problems of Windows Vista CD

  Windows Vista Home premium. You want to burn on a CD - RW disc image files. Inserted the disc in the drive and got the message "Windows is unable to read the disc in the drive E:\. Make sure that the disc uses a firmat Windows recognizes. If the drive is not formatted, you must format it before you use it. "I can't get a dialog to come so that I could format. Not had this problem with a disc previous out of the box Memorex even.

  My problem has been resolved by the www.mydigitallife.info/autoplayautorun-not-working-or-missing-not-open-in-windows-vista/ procedure. The first element - material Detection service kernel - managed.

• popular error; An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  Once again; same problem, others have encountered but nothing seems to work.

  An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated

  1 physical servers

  -Internal IP address; 172.16.160.21
  -FARM Firewall

  vCenter Server

  -Internal IP address; 172.16.1.85

  -Local Office (ALX)

  Location of destination (ESXi host):

  -Internal IP address; 172.16.153.20

  -Firewall ROOMMATE

  
  Already completed:

  VMware KB: disable SSL on VMware Converter Standalone 5.x encryption   SSL disabled in converter-worker

  Firewall are open / Tunnel is open throughout the environment.

  I have attached the logs.

  Thank you very much

  POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?

• Adding a device:-201401. Make sure that the device is connected?

  I was able to set up my Explorer Measurement & Automation to detect my device (NI cDAQ-9188), but I'm unable to add the device.  The error statement says:

  Add the device failed.  From the device driver error report is as follows:

  Add a device

  -201401

  Recovery of the properties of the network device failed.  Make sure that the device is connected.

  How can I fix this so that I can test my modules e/s?

  DAQmx version: 9.7.5

  Operating system: Windows 7 64-bit

  Initially:

  In the tab network adapters, it reads:

  -No network adapters found

  In the tab of the firmware, it reads:

  -firmware version: 1.1.0f0

  Based on the status of the network configuration tab, I assumed that my problem was related to the network connection.  I have reset my network cards and this seemed to solve my problem.  Thanks for your help.

• Printer error "make sure that the printer software is installed and activated this scan from the computer via the printer software.

  Original title: print printer print

  I try to analyse some documents in pdf format, which I can send an email. It works fine last night but this morning I receive a message that says make sure that the printer software is installed and that this scan on the computer is enabled via the printer software. BN

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/