access keys stopped working after the upgrade from vista to windows 7 Professional,

Similar Questions

• Number keys don't work since the upgrade from vista to windows, anyone know why?

  Numbers on my laptop keyboard keys don't work since the upgrade from vista to windows7, anyone know why? Keys of numbers very well work in office and other software for browsers

  See the following troubleshooting steps below thanks Azam K with Microsoft Support:

  Try to activate the numeric keypad and check if it helps, here are the steps:

  1. open on-screen keyboard by clicking theStart button,all programs, Accessories, easy accessand then clickingOn-screen Keyboard.

  2. click onOptions, check thepad box and then clickOK.

  I also suggest you to start the computer using safe mode and check if it works properly, following the steps:

  1 restart your computer if it is running.
  2. tap on the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Boot Options, you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. select Safe Mode and press ENTER.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in Safe Mode, then try to perform the audit and the clean boot, here's the link:

  http://support.Microsoft.com/kb/929135

  If it is not working in Mode without failure, then try the System File Checker and see if it helps, here are the steps:

  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Here is an article that will give you information about Scan SFC:
  http://support.Microsoft.com/kb/936212

  I hope this helps!

  OT

  Change options for accessibility on Windows 7
  Control Panel
  l---> ease of access Center
  I---> make the keyboard easier to use
  I---> uncheck "turn on mouse keys.

• Problem of PC keyboard laptop Compaq Presario CQ60-224NR after the upgrade from Vista to Windows 7

  I have recently upgraded the OS on my laptop PC Compaq Presario CQ60 224NR Vista Service Pack 2 to Windows 7 Home Premium 32 bit Service Pack 1.  I updated the drivers before upgrading and checked for the latest drivers after upgrade also.  After the upgrade, the keyboard of the laptop works only partially when I use a web browser.  This includes IE and Firefox.  Above the QWERTY keys do not work correctly.  If I press one of these keys or SHIFT and one of these keys, the last character, symbol, or space I typed before is repeated instead.  Y at - it a fix for this problem?

  Well, I searched for several hours and found a solution, at least for me I am a customer of Comcast and I installed constant guard.  There is a key logger that is included in the package that it causes the problem.  I uninstalled GuardedID and my problem disappeared.  I hope it works for you.

• After the upgrade from Vista to Windows 7 games installed in my laptop (Chainz, Cubis and Bejeweled, etc.) have bars on each side when displayed in full screen.

  I have a laptop Acer Aspire with a screen 16:9 wide (15.6 "), it has the latest graphic drivers ATI and all operating system updates.  After the upgrade to W7 (free upgrade with the purchase of the laptop) everything works wonderfully except all the games installed now not displayed in full screen, I get black bars on both sides, they used for Vista, but not with W7.

  I already tried different settings in the games options, administrator, resolutions screen different, being run in maximized 'Vista' and 'Run' mode of the file properties dialog box shortcut and .exe.  This happened without any security program installed that is not a factor.

  I am at a loss.

  This is to maintain the ratio l / h. It is how the images stretch. ATI no longer has the opportunity to play with the proportions for the sort of stuck like that unless you can find in your version of ATI Catalyst. It is in fact full screen as opposed to windowed mode, but it does not cover the entire screen.

  You can try different resolutions within the application to see if it will actually make your apps full screen to use the entire screen. That's all, remains to be done. I don't know why ATI has decided to exclude this option because some people hate the black bars or hate the stretched images.

• USB ports on the Satellite L30-105 does not work after the downgrade from Vista to XP

  Hello

  Model: Toshiba L30-105 PSL33E-02S02HFR.
  USB ports (2) do not work after the downgrade from vista to Windows xp family. All the drivers downloaded from Toshiba Web site.

  Thanks for any help,

  Camellia,

  Have you installed Win XP all service packs?
  SP2 provides some patches on the USB feature.

  You definitely need to update the Win XP OS

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the upgrade from Vista Home Premium to Windows 7, I can't connect to my router (Netgear WNDR3300)

  After that upgrade from Vista Home Premium to Windows 7 - I'm unable to connect to my router (Netgear WNDR3300) - message network States "the settings saved on this computer for the network do not match the requirements of the network" - any ideas what could have changed during the upgrade to make me lose my connection to the wireless router?

  Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The upgrade from Vista to Windows 7: How can I make sure that I keep Microsoft Office

  A few months back I took advantage of this offer to upgrade from Vista to Windows 7 for a discounted price. After that I downloaded the upgrade file, Upgrade Advisor told me that because I'm using Vista business and I was upgrade 7, that my computer would probably be home must pass through with a 'clean install', thus wiping my hard drive.

  That's fine with me, I could just move my documents and Favorites on an external hard drive. But I'm afraid that the upgrade will be wipe my Microsoft Office programs.

  I bought this computer a few years ago. I don't even know if I bought the program with office bundled with it, or if I bought it separately (and probably the discs are somewhere in storage).

  How can I make this update without losing Microsoft Office? Is it possible to confirm if my word has come with my computer or if I installed it separately. If it came with it, and I lose it, certainly there must be a free way for me to recover. Right?

  Any other advice for someone planning on the upgrade?

  Thank you!

  You're the one who knows if you installed Office.

  Office (Word, etc.) comes for free with Windows. you have to buy.

  If Office is preinstalled, it was a test.

  A clean installation will wipe everything.

  You cannot transfer programs.

  It needs to be reinstalled from the original media.

  If you do not have the desktop drive:

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Some keys stop working after the update of the Sierra (only for a specific profile)

  After update to Sierra my keyboard worked well for a while.  But at random, U I O P J K L keys stopped working.

  The bug only shows 1 profile. If I create another profile new profile keyboard works very well.

  Anyone know what that sometimes caused that and with the fix is?

  Hello ExcelsiorPath,

  After reviewing your post, it seems that several keys do not work on a single profile. This looks like an option that may have been changed.  I recommend you to read this article, it may be able to help solve the problem.
  
  

  If the other keys do not work

  You may have accidentally set an option that changes your keyboard works.

  • Choose the Apple menu > System Preferences, click Accessibility, and then click keyboard. Make sure that slow keys is turned off. If slow keys is enabled, you will need to keep a key longer than usually before it is recognized.

  • Choose the Apple menu > System Preferences, click Accessibility, and then click mouse and Trackpad. Make sure that the mouse keys is turned off. If the mouse keys is enabled, pressing the keys in the numeric keypad moves the pointer instead of entering the numbers.

  • Choose the Apple menu > System Preferences, click keyboard, and then click input methods. Select "Show the menu in the menu bar." Open the menu entry, then make sure that the correct keyboard layout is selected.

    To display the keyboard layout, click keyboard, and then choose "See the viewers for emoji keyboard symbols in the menu bar."

  macOS Sierra: If your keyboard does not work

  Thank you for using communities of Apple Support. Good day.

• USB mouse & keyboard stop working after the upgrade of Intel generic drivers drivers!

  Original Post: USB mouse & keyboard stop working after upgrade to generic drivers

  After you install Windows, the Generic USB controller drivers are installed. My mouse & keyboard as planned work & that are each recognized as "compatible mouse/keyboard HID."

  After I installed the Intel drivers for root USB controller, the mouse & keyboard stop working and are classified as unknown. Shortly after, they are considered HP USB Optical Mouse & HP USB Standard keyboard, however the drivers never properly install and they remain under unknown devices with a yellow exclamation point.

  I have searched high & low for these device drivers, they do not exist. I installed the drivers for all of the materials appearing on the site of the seller. This has happened on several computers, laptops and desktop computers.

  I've done all the troubleshooting I can think. Uninstalled all the controllers/USB hubs & restarted. Switched USB ports, I tried new mouse & keyboard, wanted Windows updates.

  The only way I can make it work is if I use the generic Windows drivers, who then recognized the mouse & KB "HID compliant". It seems that if I install Intel drivers, it recognizes the mouse & keyboard more in detail and he wants specific drivers to continue.

  Any help / suggestions would be greatly appreciated.

  Thanks for the reply.

  Because your computer is on a domain network, it would be better to be posted on the TECHNET forums. They are experts in your field of investigation and would be in a better position to answer your concerns.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itprogeneral&filter=AllTypes&sort=lastpostdesc

  In the future if you have problems with Windows. Not to contact us. We will be happy to help you.

• All Creative Cloud software has stopped working after the upgrade to Windows 10

  So... earlier this week, I upgraded my computer from Windows 8.1 for Windows 10, in which I had installed CC of Photoshop, Illustrator CC and first Pro CC from the creative cloud application, all versions of 2015. They were all working well.

  Then, after the upgrade, none of them work. I tried to delete it, follow these instructions: use of the Adobe Creative Cloud cleaning tool to resolve installation issues , but no progress.

  I have error message seems to be exactly the same as in this post: Adobe Illustrator CC 2015 does not launch on Windows Pro 10

  But their solution was a reinstallation of the system, which I just can't do it right now.

  You may wonder that Windows 10 is the problem, but I did exactly the same thing on my phone 3 weeks ago. And it worked fine! (the only difference is that I had CS6 and after upgrading Windows 10 CC)

  Screenshots:

  

  

  

  This error happens (right) too, but I accidentally ticked the box "don't show me": ins.png https://forums.adobe.com/servlet/JiveServlet/showImage/2-7823824-798279/AI-CC19-Error-Plug

  If it does not work. You can try to uninstall and reinstall Microsoft redistributable packages of 2013 and 2012 versions.

• After the OS from Vista to Windows 7 upgrade, lost bookmarks. Could they be somewhere in "windows.old"?

  Hello

  I upgraded my OS from Vista to Windows 7 and lost bookmarks, I had in Firefox. Back up my documents files and they are OK. Unfortunately, I don't think to back up my Firefox bookmarks.html file.

  However, I did the upgrade of the operating system from the disk and a "windows.old" folder has been created which seems to have a lot of my old files, applications, and others, but I can't find "bookmarks.html" in the firefox folder or in my user folder.

  Is there another place in windows.old where bookmarks could be, or a different file name, it may be under?

  Please help, there are a few important bookmarks that I lost and which were accumulated over several years.

  Thank you!

  Firefox has not used the file bookmarks.html for storage of bookmark since the release of Firefox 2. You need a JSON bookmark backup file or the file places.sqlite. See this:
  
  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

  Your old profile is located here in Windows Vista and Win7:
  
  drive: \Users\Windows login user name\AppData\Roaming\Mozilla\Firefox\Profiles\profile_name

  You may need to display 'files and hidden folders' in Win7 to be able to access the Firefox profile in windows.old files and the new installation of the OS.

• Side-by-side configuration is incorrect, after the upgrade from Vista Business to Win7 for AutoCAD, Revit (Autodesk) and most but not all Adobe programs and a few others.

  I have seen many other people having this problem, but none of the soultions has solved the problem.

  After the upgrade to Win 7 Vista Business company. a number of my programs will not work. a mistake

  "The application failed to start because its side-by-side configuration is incorrect."

  train the Viewer even I get this

  Activation context generation failed for "C:\Program Files\AutoCAD 2010\acad.exe". Load Assembly Microsoft.VC90.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8" was not found. Please use sxstrace.exe for detailed diagnosis.

  I tried to uninstall completely all Autodeck and re install but that has not worked.

  Install the Visual C ++ 2008 Runtime.

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9b2da534-3e03-4391-8a4d-074b9f2bc1bf&displaylang=en

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Get error "ggsci.exe has stopped working" after the upgrade of OGG 12.1.2.0.0

  Hi gurus of the Oracle,.

  I'm testing the OGG Version 11.2.1.0.19 to 12.1.2.0.0 upgrade. But after upgrade, I am getting below error while trying to access ggsci.exe

  ggsci.exe has stopped working

  If followed the steps (GoldenGate 12.1.2.0 Install/Upgrade on OEL 6.4 x 86-64 |) Blog of Maaz Anjum)

  1. stop all processes Ogg

  2. has taken the old OGG home backup

  3. call the YES program and gave the location of the OGG existing House 11 G

  4. once the upgrade has completed, I tried to access the ggsci.exe but by mistake. Setting error image.

  

  If someone has solved this problem. Please help me.

  Best regards

  Jamsher Khan

  I strongly suggest to talk to support.

• Time travel has stopped working after the upgrade to watch OS 3

  Hi all
  Since I upgraded to 3 watch OS stopped working time travel feature - by turning the digital Crown now does nothing.  The digital Crown works fine on the other screens, for example the notifications, but not on the dial of the watch itself.  I did a cycle power, but to no avail. Does anyone have information?

  Thank you
  Ray

  Come on, show on your iPhone in the app, then check the clock settings. There is an option to turn on or off; travel in time after the update to watch OS 3, it has been disabled by default for me.