Access PIX using SSH when connected remotely with VPN client

Hello

I think that this should be a fairly simple for someone to sort for me - I'm new to PIX configuration If Yes please excuse my stupidity!

I changed the config on our PIX to allow only access via SSH (rather than via telnet as it was previously configured)

Now, everything works fine when I'm in the office - I can connect to the PIX using SSH without any problem.

However, if I work from home and connect to the office using my VPN client (IPSEC tunnel ends on the PIX firewall itself) I find that I can not connect to the PIX.

I have configured the PIX to access ssh on the office LAN subnet and the client pool of IP addresses used for VPN connections by using the following commands:

SSH 172.64.10.0 255.255.255.0 inside

SSH 192.28.161.0 255.255.255.0 inside

where the 1st line is reference to the office's LAN, which works very well, and the 2nd line denotes the IP address pool configured on the PIX for VPN access.

Can someone tell me how to fix this? I have the feeling that its something pressing!

Thank you

Neil

Try the command "management-access to the Interior.

Tags: Cisco Security

Similar Questions

  • Can I use MSTSC to connect remotely on the internet?

    Can I use MSTSC to connect remotely on the internet (local computer is Vista Ultimate SP2 to a distance Win 2003 Server)? I used MSTSC on my local network and it works well.

    Hi Ibaltsae!

    Thanks for posting. Yes, you can use MSTSC to connect remotely to a computer or server on the internet, the same as if you were using your local network. To connect to the remote computer, use the DNS or public IP that are associated with name.

    I hope this helps! Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Can I use Siri new Apple remote with my Apple TV 3rd generation?

    Can I use Siri new Apple remote with my Apple TV 3rd generation?

    No. not compatible.

  • Installation of VM with VPN client access to the network local provents

    What is the best approach for the connection to the VPN in the following scenario?

    We want to install VM for our projects as VPN client networking (using the cisco vpn client). In many cases the VPN profile that is configured by the client is configured to prevent access to the local network, but rather the tunnels all through the VPN.

    I tried the NAT and Bridged networks and once you connect to the VPN client, the conectitivy of the virtual machine is limited to the VMWare console. SSH and other connections no longer work.

    Thanks for any idea.

    I'd VNC - that's what I use for a VM XP that uses the client VPN SecuRemote CheckPoint blocking the same way (wisely) off incoming traffic when the connection is made to the other end of the VPN.

    Just paste lines similar to the following in your .vmx file when the virtual machine is shut down:

    RemoteDisplay.vnc.enabled = TRUE
    RemoteDisplay.vnc.port = '5910 '.
    RemoteDisplay.vnc.password = 'somepassword '.
    RemoteDisplay.vnc.keymap = 'uk '.

    Note that you point your VNC client software on the IP address (and port of your .vmx file) to your server 2.0, not the virtual machine host. Use a different port for each computer virtual you need simultaneous to access.

  • Maintenance of the internal DNS after connecting to the VPN Client

    We connect to the VPN client, all day and I wanted to know if there is a way to continue to use our internal LAN DNS when you are connected. For example, when I connect to the VPN client, our mail server internal and the dns resolves the public IP address.

    Thank you

    You can set up the split-dns service, but which can be configured at the vpn your client device, because you only connect with vpn client and normally politicians vpn client get pushed vpn headend unit.

    Here is the split-dns command if your customer comes to run ASA firewall, and they allow you to configure:

    http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/S8.html#wp1404571

  • How to: use desktop connection remote with windows 7 to windows xp sp3

    Original title : is it possible to use the new remote desktop provided with windows 7 to windows xp sp3 I want to use the audio options

    Hello
    Please I want to know if there is any way to use the new options included in windows Remote Desktop connection 7 update connection Remote Desktop in windows xp sp3 or as the RTD of widows 7
    is there a way please just send me email to * address email is removed from the privacy *.

    Thanks in advance
    hamadakhalaf

    Hello

    You need third-party software to do this, I suggest you use your favorite search engine and check for the software that supports this option.

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Also check out this link:
    http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/a29f6207-4551-4AE1-941e-364919f50ad4

    It will be useful.

  • Access to the external network when connected to the VPN

    I have a 5505 I successfully install an IPSEC connection to. It uses NT to Active Directory authentication to authenticate. After I log in, I can access everything on the remote network (internal). I can't access anything on the internet.

    Nothing behind the ASA can access internet, vpn clients that cannot come back on.

    Syslog messages show buiding vpn clients to the top and down the ICMP connections if they try to do a ping to the outside, but they are not answered.

    I know it's most likely a statement ACL or NAT that I am out of ideas?

    config attacched

    You have 2 options.

    Split tunneling, unencrypted access to internet.

    Public Internet on a stick, integrated internet traffic to ASA and back on.

    permit same-security-traffic intra-interface

    Global 1 interface (outside)

    NAT (outside) 1

  • I can't start a desktop connection remote with my file server, but I can't get to my domain controller. Other computers on the network can initiate together.

    Using server 2003 as DC and server 2003 as a FS. Problem computer running windows 7 upgraded to vista professional. I can open a desktop session with the domain controller remotely, but I can't launch with the fs. Other computers on the domain have no problem with a server opening. I have access to shared folders on the MSDS via LAN and can ping the fs. Also can not use MySQL on the fs with this computer. FS cannot launch the Office with the computer problem remotely but can with others.

    Hi Gary,.

    Thanks for posting in the Microsoft Community.

    The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

    http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

    If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

  • E3000 resets occasionally wired port when connecting to the VPN PPTP using Windows 7.

    I've had an E3000 for a few months now and a couple of times per week that the router loses wired Ethernet connectivity while PPTP VPN connects via Windows 7. The router does not actually resets itself... but darkens light of wired connection, the computer establishing VPN, and connectivity to the router is lost. Within 30 to 45 seconds, the port becomes active, once more, and to establish the VPN connection. I've not seen this on a wireless connection, but I do not often, which may be why. Similarly, I have not seen this on my Vista or XP wired computers using the Windows VPN client... but then again I can't use them often enough to meet the problem.

    I see this mostly on my Windows 7 (x 64) SP1, it also appeared pre - SP1, development equipped PC IP6 disabled on the PPTP VPN. And I don't see that on the establishment of a connection... once the connection has been made I can be operational for hours (5/6 or more a day) with no issue.

    While this issue causes me all real headaches like this doesn't happen on the connection... I thought someone should know.

    abandoned,

    Gave to your suggestion to try, but did nothing to eliminate the problem. The router was already on the version the most recent but re-flashed in any case. I ran 3 days on an old Windows XP machine connected to a different port on the router, I had 3 days to do work, and I've never had the drop on the VPN port. But this morning back on my Windows 7 machine... the port fell during my first attempt... I then had no problem, the rest of the day. Despite her disconnect and reconnect a PPTP VPN a few times more. Go figure.

    Let's consider this resolved... as I don't want to lose too much everyones time hassling with something that seems to be minor. Thanks for the help!

  • Default gateway when connected to the VPN

    Thanks for reading!

    It is probably a dump so bear with me the question...

    I set up a VPN connection with a Cisco ASA 5505 giving over the internet, with customers behind him (on the same subnet), when environmental connected ot the VPN I can reach the router inside giving me and the other pass behind the router (each switch is connected to the router), but nothing else.

    My beets is that the router is to play with my connection, but nevermind that!, Setup is not complete when even... my question is more related to the bridge I'm missing when I'm outside, is connected to VPN on the ASA, pourrait this BUMBLE? I would not a Standard gateway in the command ipconfig settings in windows?

    That's who it looks like now:

    Anslutningsspecifika-DNS suffix. : VPNOFFICE

    IP-adress...: 10.10.10.1

    Natmask...: 255.255.255.0.

    Standard-gateway...:

    The internal network is:

    172.16.12.0 255.255.255.0

    Here is my config for the SAA, thank you very much!

    ! FlASH PA ROUTING FRAN VISSTE

    ! asa841 - k8.bin

    !

    DRAKENSBERG hostname

    domain default.domain.invalid

    activate the password XXXXXXX

    names of

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 172.16.12.4 255.255.255.0

    !

    interface Vlan10

    nameif outside

    security-level 0

    IP 97.XX. XX.20 255.255.255.248

    !

    interface Ethernet0/0

    switchport access vlan 10

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    passive FTP mode

    clock timezone THATS 1

    clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00

    DNS server-group DefaultDNS

    domain default.domain.invalid

    object-group Protocol TCPUDP

    object-protocol udp

    object-tcp protocol

    172.16.12.0 IP Access-list extended sheep 255.255.255.0 allow 10.10.10.0 255.255.255.0

    MSS_EXCEEDED_ACL list extended access permitted tcp a whole

    Note to access VPN-SPLIT-TUNNEL VPN TUNNEL from SPLIT list

    standard of TUNNEL VPN-SPLIT-access list permits 172.16.12.0 255.255.255.0

    !

    map-TCP MSS - map

    allow to exceed-mss

    !

    pager lines 24

    Enable logging

    timestamp of the record

    exploitation forest-size of the buffer to 8192

    notifications of recording console

    logging buffered stored notifications

    notifications of logging asdm

    Within 1500 MTU

    Outside 1500 MTU

    mask pool local 10.10.10.1 - 10.10.10.40 VPN IP 255.255.255.0

    ICMP unreachable rate-limit 1 burst-size 1

    ICMP allow any inside

    ICMP allow all outside

    ASDM image disk0: / asdm-625 - 53.bin

    don't allow no asdm history

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0 access-list sheep

    NAT (inside) 1 172.16.12.0 255.255.255.0

    Route outside 0.0.0.0 0.0.0.0 97.XX. XX.17 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout, uauth 0:05:00 absolute

    dynamic-access-policy-registration DfltAccessPolicy

    the ssh LOCAL console AAA authentication

    Enable http server

    http 172.16.12.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map interface card crypto outside

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 65535

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    Telnet timeout 5

    SSH 172.16.12.0 255.255.255.0 inside

    SSH timeout 5

    Console timeout 0

    !

    a basic threat threat detection

    Statistics-list of access threat detection

    internal VPNOFFICE group policy

    VPNOFFICE group policy attributes

    value of server DNS 215.122.145.18

    Protocol-tunnel-VPN IPSec

    Split-tunnel-policy tunnelspecified

    Split-tunnel-network-list value TUNNEL VPN-SPLIT

    value by default-field VPNOFFICE

    Split-dns value 215.122.145.18

    no method of MSIE-proxy-proxy

    username password admin privilege 15 XXXXXX

    username privilege XXXXX Daniel password 0

    username Daniel attributes

    VPN-group-policy VPNOFFICE

    type tunnel-group VPNOFFICE remote access

    attributes global-tunnel-group VPNOFFICE

    VPN address pool

    Group Policy - by default-VPNOFFICE

    IPSec-attributes tunnel-group VPNOFFICE

    pre-shared key XXXXXXXXXX

    !

    class-map MSS_EXCEEDED_MAP

    corresponds to the MSS_EXCEEDED_ACL access list

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the netbios

    inspect the rsh

    inspect the rtsp

    inspect the skinny

    inspect esmtp

    inspect sqlnet

    inspect sunrpc

    inspect the tftp

    inspect the sip

    inspect xdmcp

    inspect the icmp error

    inspect the pptp

    inspect the amp-ipsec

    inspect the icmp

    class MSS_EXCEEDED_MAP

    advanced connection options MSS-map

    !

    global service-policy global_policy

    privilege level 3 mode exec cmd command perfmon

    privilege level 3 mode exec cmd ping command

    mode privileged exec command cmd level 3

    logging of the privilege level 3 mode exec cmd commands

    privilege level 3 exec command failover mode cmd

    privilege level 3 mode exec command packet cmd - draw

    privilege show import at the level 5 exec mode command

    privilege level 5 see fashion exec running-config command

    order of privilege show level 3 exec mode reload

    privilege level 3 exec mode control fashion show

    privilege see the level 3 exec firewall command mode

    privilege see the level 3 exec mode command ASP.

    processor mode privileged exec command to see the level 3

    privilege command shell see the level 3 exec mode

    privilege show level 3 exec command clock mode

    privilege exec mode level 3 dns-hosts command show

    privilege see the level 3 exec command access-list mode

    logging of orders privilege see the level 3 exec mode

    privilege, level 3 see the exec command mode vlan

    privilege show level 3 exec command ip mode

    privilege, level 3 see fashion exec command ipv6

    privilege, level 3 see the exec command failover mode

    privilege, level 3 see fashion exec command asdm

    exec mode privilege see the level 3 command arp

    command routing privilege see the level 3 exec mode

    privilege, level 3 see fashion exec command ospf

    privilege, level 3 see the exec command in aaa-server mode

    AAA mode privileged exec command to see the level 3

    privilege, level 3 see fashion exec command eigrp

    privilege see the level 3 exec mode command crypto

    privilege, level 3 see fashion exec command vpn-sessiondb

    privilege level 3 exec mode command ssh show

    privilege, level 3 see fashion exec command dhcpd

    privilege, level 3 see the vpnclient command exec mode

    privilege, level 3 see fashion exec command vpn

    privilege level see the 3 blocks from exec mode command

    privilege, level 3 see fashion exec command wccp

    privilege, level 3 see the exec command in webvpn mode

    privilege control module see the level 3 exec mode

    privilege, level 3 see fashion exec command uauth

    privilege see the level 3 exec command compression mode

    level 3 for the show privilege mode configure the command interface

    level 3 for the show privilege mode set clock command

    level 3 for the show privilege mode configure the access-list command

    level 3 for the show privilege mode set up the registration of the order

    level 3 for the show privilege mode configure ip command

    level 3 for the show privilege mode configure command failover

    level 5 mode see the privilege set up command asdm

    level 3 for the show privilege mode configure arp command

    level 3 for the show privilege mode configure the command routing

    level 3 for the show privilege mode configure aaa-order server

    level mode 3 privilege see the command configure aaa

    level 3 for the show privilege mode configure command crypto

    level 3 for the show privilege mode configure ssh command

    level 3 for the show privilege mode configure command dhcpd

    level 5 mode see the privilege set privilege to command

    privilege level clear 3 mode exec command dns host

    logging of the privilege clear level 3 exec mode commands

    clear level 3 arp command mode privileged exec

    AAA-server of privilege clear level 3 exec mode command

    privilege clear level 3 exec mode command crypto

    level 3 for the privilege cmd mode configure command failover

    clear level 3 privilege mode set the logging of command

    privilege mode clear level 3 Configure arp command

    clear level 3 privilege mode configure command crypto

    clear level 3 privilege mode configure aaa-order server

    context of prompt hostname

    Cryptochecksum:aaa1f198bf3fbf223719e7920273dc2e

    : end

    Right if disbaled all traffic will pass tunnel and snack active local internet gateway is used specific traffic wil go to the tunnel.

  • VPN access with VPN client problem. Help, please

    I have a PIX 520 as VPN tunnels endpoint device. I was able to establish an IPsec connection. I checked that I have gave me an address in the IP pool that I set up but I can't to any resource on the internal network. I could only ping myself. When I run ' ipconfig/all' I see my address on the correct vpn with DNS interface, but my front door is set to my own address. I think that's the problem. Please help me solve this problem. Let me know if you need more information.

    Here are some suggestions you might try to get this working:

    1.) change your "taken" to access-list. The lines are no longer supported by Cisco even if they still work. This will help you in debugging your access list because there will be some hitcounts.

    There is a tool from cisco for conduits of concert on access lists:

    http://www.Cisco.com/cgi-bin/tablebuild.pl/PIX?sort=release

    Download the: occ - 121.zip

    PIX Firewall Outbound leads binary converter for Windows, version 1.2.1

    2.) change your pool of VPN.

    IP local pool techvpn 10.x.x.100 - 10.x.x.120

    With this, it's already you have a 10.x.x.x subnet in your internal network. The ip pool automatically assigns a 255.0.0.0 for the VPN Clients subnet mask. This may cause routing problems. You can use a subnet used anywhere 172.16.100.x.

    example:

    No vpngroup address techvpn pool lsdvpn

    no ip local pool techvpn

    IP local pool techvpn 172.16.100.1 - 172.16.100.254

    vpngroup address techvpn pool lsdvpn

    No inside_outbound_nat0_acl access list

    No outside_cryptomap_dyn_20 access list

    inside_outbound_nat0_acl ip access list allow any 172.16.100.0 255.255.255.0

    outside_cryptomap_dyn_20 ip access list allow any 172.16.100.0 255.255.255.0

    Claire ipsec his

    Claire isakmp his

    sincerely

    Patrick

  • IPSec remote VPN with VPN client in error

    Hello

    ASA 5505 configuration is: (installation using ASDM)

    output from the command: 'show running-config '.

    : Saved
    :
    ASA Version 8.2 (5)
    !
    hostname TEST

    Select _ from encrypted password
    _ encrypted passwd
    names of
    !
    interface Ethernet0/0
    switchport access vlan 2
    !
    interface Ethernet0/1
    !
    interface Ethernet0/2
    !
    interface Ethernet0/3
    !
    interface Ethernet0/4
    !
    interface Ethernet0/5
    !
    interface Ethernet0/6
    !
    interface Ethernet0/7
    !
    interface Vlan1
    nameif inside
    security-level 100
    IP 192.168.1.1 255.255.255.0
    !
    interface Vlan2
    nameif outside
    security-level 0
    IP address dhcp setroute
    !
    passive FTP mode
    sap_vpn_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
    inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.224
    pager lines 24
    asdm of logging of information
    Within 1500 MTU
    Outside 1500 MTU
    IP local pool test_pool 192.168.10.0 - 192.168.10.20 mask 255.255.255.0
    ICMP unreachable rate-limit 1 burst-size 1
    don't allow no asdm history
    ARP timeout 14400
    Global 1 interface (outside)
    NAT (inside) 0-list of access inside_nat0_outbound
    NAT (inside) 1 0.0.0.0 0.0.0.0
    Timeout xlate 03:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    Floating conn timeout 0:00:00
    dynamic-access-policy-registration DfltAccessPolicy
    AAA authentication http LOCAL console
    Enable http server
    http 192.168.1.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
    life crypto ipsec security association seconds 28800
    Crypto ipsec kilobytes of life - safety 4608000 association
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
    outside_map interface card crypto outside
    crypto ISAKMP allow outside
    crypto ISAKMP policy 10
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    Telnet timeout 5
    SSH timeout 5
    Console timeout 0
    dhcpd outside auto_config
    !
    dhcpd address 192.168.1.5 - 192.168.1.132 inside
    dhcpd allow inside
    !

    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    WebVPN
    internal sap_vpn group policy
    attributes of the strategy of group sap_vpn
    value of server DNS 192.168.2.1
    Protocol-tunnel-VPN IPSec


    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list sap_vpn_splitTunnelAcl
    username password encrypted _ privilege 0 test
    username test attributes
    VPN-group-policy sap_vpn
    Username password encrypted _ privilege 15 TEST
    type tunnel-group sap_vpn remote access
    tunnel-group sap_vpn General-attributes
    address test_pool pool
    Group Policy - by default-sap_vpn
    sap_vpn group of tunnel ipsec-attributes
    pre-shared key *.
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    Review the ip options
    !
    global service-policy global_policy
    context of prompt hostname
    no remote anonymous reporting call
    Cryptochecksum:b67cdffbb9567f754052e72f69ef95f1
    : end

    I use customer VPN authentication with IP 192.168.2.20 host group with username:sap_vpn and key pre-shared password but not able to connect to the vpn and the error message attached.

    ASA, set up with the initial wizard ASDM: inside the interface IP 192.168.1.1 (VLAN1) and outside (VLAN2) IP 192.168.2.20 assigned by using DHCP. I use outside interface IP 192.168.2.20 to HOST IP to the VPN client for the remote connection? is it good?

    Please advise for this.

    Hello

    What train a static IP outside? We need a static IP address to connect, please try again and let us know how it works?

    Kind regards

  • HP Envy 7640: Wireless issues when connecting to a VPN

    Hi all

    I just got this printer (HP Envy 7640) of my company. I work from home, I need to be connected to a VPN.

    When I connect to this VPN, my printer (wireless) does not work.

    As soon as I stop my VPN connection, all of my prints are made.

    How to solve this problem?

    My COMPUTER support explained to me that the only why do the job is to stop the wireless connection and use a USB connection.

    Do you have another solution?

    Also, how to change USB connection wireless connection? I found the solution on the other hand, but not like I need.

    Thanks a lot for your help!

    Kind regards

    Juliette

    Hello

    You can print to the printer from a computer connected to the same local network as the printer, by connecting to a USB port, you can print from the same local computer on the pritner, you will not be able to print from the remote desktop, the PC and the printer must be connected to the same LAN to print.

    You should be able to use the wireless on the other laptop, as long as this laptop is connected to the local network and the printer is connected too you can print on it, by connecting the USB cable, we did not unplug the pritner from the local network and therefore printing wirelessly from other computers on this network is available with no difference.

    Hope that helps,

    Shlomi

  • Internet access with VPN Client to ASA and full effect tunnel

    I'm trying to migrate our concentrator at our new 5520 s ASA. The concentrator has been used only for VPN Client connections, and I have not the easiest road. However, I, for some reason, can't access to internet through our business network when I've got profiles with lots of tunneling.

    I've included the configuration file, with many public IP information and omitted site-to-site tunnels. I left all the relevant stuff on tunnel-groups and group strategies concerning connectivity of VPN clients. The range of addresses that I use for VPN clients is 172.16.254.0/24. The group, with what I'm trying to access the internet "adsmgt" and the complete tunnel to our network part is fine.

    As always, any help is appreciated. Thank you!

    Hüseyin... good to see you come back.. bud, yes try these Hüseyin sugesstiong... If we looked to be ok, we'll try a different approach...

    IM thinking too, because complete tunnel is (no separation) Jim ASA has to go back for the outbound traffic from the internet, a permit same-security-traffic intra-interface, instruction should be able to do it... but Jim start by Hüseyin suggestions.

    Rgds

    Jorge

  • Cannot use Chrome to connect to the web client vcenter after update.

    vCenter Web Client Version 5.1.0 build 1115182

    Customer integration Plugin VMRC version 5.1.0 build 1060398

    Customer support version 5.1.0 build 832030

    Flash Player WIN 11,8,800,94

    Browser Google Chrome Version 29.0.1547.66 m

    After all components of vCenter update I am more able to use Chrome to access vCenter Web Client.  When the connection page opens, I get the following error:

    Connection error: could not connect to vSphere Web Client. Contact your administrator to resolve this problem.

    If I try to connect, I get this error:

    Provided credentials are not valid.

    Everything works fine if I use IE 10.  Someone at - it see this before and knows how to solve?

    Thank you

    Mux

    It is fixed.  I had 'Block third-party cookies' checked.  After unchecking it connected perfectly.

    Mux

Maybe you are looking for

  • External DLL with struct array

    I am train (new to this) call an external dll.  The function prototype looks like this: int FUNCTION (int * count, struct List_t * list); Count is of type Long List_t is a structure that looks like: typedef struct List_t{char name [MAXCHARS];char fil

  • Outlook Express error "your server was terminated suddenly the connection" 0x800CCC0F

    Error line: your server unexpectedly terminated the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.gmail.com', server: 'pop.gmail.com', Protocol: POP3, Port: 110, secu

  • After the virus infection and put, can no longer play games on Facebook or Pogo

    While playing a game on facebook my avg detected 6 viruses and malware activity, I quarentined them and removed the virus, I did a full computer scan and found nothing. Now I can't play the games on facebook or on pogo but can through google chrome a

  • BlackBerry pearl 8130 smartphones all lost information

    I tried to set up a password that I did, somehow, I miss spelled my password, tried about three times, and my phone has really if empty with a clock in the Middle, I finished in Setup wisard as when it is new, I went forward with the wisard and I got

  • Uninstall/remove XP Mode in Win 7 (no 'uninstall')

    Greetings; I'm having a hard time to find a good answer to this. Thanks for any help. I just put in place a new Veriton Acer running Windows 7 pro. I did the install OEM checking the box to install "Windows XP Mode" as part of the package. Everything