Access Point WRT1900AC &; Firmware version: 1.1.10.167514, it cannot be accessed the config page.
Hello!
I am a new user of router dual-band WRT1900AC . The installation has been updated instantly to
Firmware version: 1.1.10.167514
Release date: June 30, 2015
My WRT1900AC is configured as a wireless gateway.
https://community.Linksys.com/T5/wireless-routers/WRT1900AC-as-wireless-access-point/TD-p/847286
Also, I have disabled firewall and uPnP.
A tutorial here:
http://www.Linksys.com/us/support-article?articleNum=140371
Everything works except that without access to the router config page.
The problem is, I can't access my page to config WRT1900AC Wireless Access Point and the only solution is to connect temporary exit HAND ROUTER LAN to WAN WRT1900AC, can I access my AP
(after restart of course). Change after I return the cable to the LAN again and restart WRT1900AC. This works.
Yesterday, I spoke with live chat. I received recommendations:
"Once the router is configured to bridge fashion, page configuration accessible only using its new IP address. The new IP address can be found on the main router DHCP table. It is because only in LAN - LAN, the
WRT1900AC will be his disabled DHCP. »
I also saw Table of customer routers main DHCP but I have not found the IP address of my wireless WRT1900AC Access Point there. I think it is a bug in the version of the Firmware: 1.1.10.167514
Page config in the case of WRT1900AC Wireless Access Point is isolated or possible only thanks to the WAN WRT1900AC. It would be nice if someone confirms that and maybe in the next version of
fix. :-) I have a beautiful smartphone App "Smart Wi - Fi" and I can not comfortably use it due to this error/bug.
Otherwise everything works well and stably.
inspire wrote:
Hi chadster766!
Thanks for your suggestion and a quick response. I have a feeling it would work then as you described. But how to set Internet settings in mode Bridge? I've already put a static IP address router IP address WRT1900AC. I see it with IP scanner.
If I leave the cables as you suggest (hand router LAN to WAN WRT1900AC), the Internet does not work. In this case go to the config page, but Internet with other devices will not work. Also good Wifi, it works but can not access. How to set the Bridge Mode? (I think this is my problem in this scenario)
IP address of the router (LAN):
Connectivity-online-online details router LAN => Edit
* If your main router IP subnet example is 192.168.0.x, then set the address of the WRT1900AC IP to an IP outside the range of the main router DHCP. Ex: 192.168.0.2
Bridge mode:
Connectivity-online Internet-online IPv4 settings => Edit-online Bridge Mode
Tags: Linksys Routers
Similar Questions
-
Tecra M5: Can not access the internet pages, but can ping in cmd.exe
Hi all, this is confusing to me.
I've been happily connected to my WLAN for more than a year without any problems. I recently updated my drivers for the following on my Tecra M5:
-Intel Pro Wireless adapt
-Drivers audio Sigmatel
-nVidia graphics cardNow, after facilities, everything was fine. However, a few days later, I turned on the laptop and went to IE7 and it cannot display the web page (my homepage is www.google.co.uk). I called my ISP to help and they reported problems on the service, and they gave me the www.google.co.uk ip address I got a response of in cmd.exe. It seems that I can get out on the internet but I can't access the Web pages - it could be a DNS issue?
I have disabled my A - V and firewall and tried but get the same question. I also tried to restore the PC back more than a month and it did not help either. I'd appreciate any help that anyone can give.
I also plugged the laptop directly into the router using an ethernet cable, so it's not only a wireless issue either.
I have installed any other software at all at the moment and the only other thing that got my attention, it's that, in the field of restoration, there a lot of system restore points, which I wasn't expecting to see in the last month. But it could be a Kipper.
Thank you very much
MARC
Hello
According to your message, you are not able to connect to internet via LAN and WLan. Is this good?
Well, in your case I would first check the router settings and re still.
In addition, you must reset the router.Usually, the router assigns the IP address, and therefore you would just plug the laptop LAN cable and then should be able to connect to the internet.
Please note that the TCP/IP protocol settings must be set to automatic.Check everything first!
-
cannot access the web page of WAP but can telnet
Can someone tell me why the following configuration won't let me access the web page of the WAP?
version 12.2
no service button
horodateurs service debug datetime localtime
Log service timestamps datetime localtime
encryption password service
!
hostname EwingWAP
!
logging buffered information
enable secret 5 $1$ z9vV$ M.rY40womPNf7YPOQqC8T.
!
username privilege 15 secret 5 careone $1$ nFXA$ ezjkiBAHeboaKYMzB4hpq.
clock timezone IS - 5
clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00
IP subnet zero
!
!
Bridge IRB
!
!
interface Dot11Radio0
no ip address
no ip route cache
!
SSID tsunami
open authentication
Comments-mode
!
base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
threshold RTS 2312
root of station-role
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
!
interface FastEthernet0
no ip address
no ip route cache
automatic duplex
automatic speed
Bridge-Group 1
No source of bridge-Group 1-learning
Bridge-Group 1 covering-disabled people
!
interface BVI1
IP 172.18.86.5 255.255.255.0
no ip route cache
!
default IP gateway - 172.18.86.1
IP http server
IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivor
y/1100
radius of the IP source-interface BVI1
1 channel ip bridge
!
!
Line con 0
line vty 0 4
local connection
line vty 5 15
local connection
!
NTP-period clock 2860650
NTP 208.90.144.53 Server
endHi Jason,
Have you tried the default user name and password?
Username - Cisco
Password - Cisco
Please try the commands below and let me know how it works...
en
conf t
AAA new-model
local IP http authentication
end
Try to open the WEB GUI by using the configured user name and password...
Concerning
Surendra -
Cannot access the settings page for adobe flash player for installation
Hi guys, I have a Samsung android Tablet and I used to use adobe flashplayer until a recent update a few days ago. After the upgrade, I found that I can not see the pages on preview versions https://settings.adobe.com/flashplayer/mobile/f books on Google books. Briefly been searching the net I found that I need Flash for this function.
I manually downloaded flash player from the flash player Web page archives 11.1. Even if flash player is now installed, everytime I try to open it, I am directed to a page online - https:// settings.adobe.com/flashplayer/mobile. This page is still empty.
I would be grateful if someone could guide me on how to access the settings page
Kind regards
Roman.
Changed using Flash Player as it is irrelevant to the beta.
Adobe no longer manages the Flash Player for Android, and he received no security updates in ages. We strongly recommend that uninstall you it. In addition, there a lot of malicious software distributed as a player from sources who are not Adobe Flash. To minimize your risk of malware, only install applications directly from Adobe or through Google. The vast majority of Android malware infections from the summary use third-party app store.
If you absolutely need Flash Player for your mobile device, there are a few browsers that operate a Linux Flash Player based in a data center and broadcast content to your phone.
Flash Player photon & browser - Android applications on Google game
Thank you!
-
I would like to be able to access the start page of Thunderbird at random times, without disconnecting and then insert it again.
Is this possible?
Under the GO menu is PAGE of STARTING PRINCIPAL.
The shortcut is alt + home page.
-
I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?
Macbeth,
From your description, it appears you are trying to get your mail using Safari to access your e-mail account. Why you do not use the Mail App?
http://www.Verizon.com/cs/groups/public/documents/adacct/Setup-email-mobile-Devi Ed.pdf
-
Trying to access the configuration page, 'the connection to the 192.168.1.1 was interrupted." I'm wired into the router. Any idea of what is the cause?
Ugh, I'm stupid... I was using the button in the back instead of the reset button on the bottom. Thanks for the tip-off that the reset method should have worked.
-
WRT54GX4 - difficulties to access the configuration Page of the router Web-based
WRT54GX4 - difficulties to access the configuration Page of the router Web-based.
I have tried all posted to forums and knowledge for several weeks now with no luck. I can feed the router to push and access the router's web-based interface, but only for a few minutes that she was leaving the loading to half way through and or does not load. If I turn on the wireless side I can access the router at will without any problem. My warranty is almost over. I'm at my wits end. I would like to replace it under warranty if I can. (^ 8.
Update: I fell up on top of the fix for my problem. After many reconfigurations over the past two months I've tried turn on all newspapers. Since the age of the newspaper I did have a problem of access to my router.
-
I'm unable to access my skydrive account, I get my user id and password but when I try to access the skydrive page it just flickers and flashes a canned red shield in the address bar. I managed to go into the live account and change the password, so I know that the connection details are correct. I can access my hotmail account.
I signed up for skydrive two days ago and have loaded the documents that I cannot now reach!
original title: skydrive connection problem
Forum on SkyDrive here:
-
I googled this problem on Google/here until my eyes is red...
- I have a local instance of 11 GR 2 Oracle running on Windows 7/Dell computer laptop
- APEX 4.2.5.00.08 is installed
- Oracle REST data services (formerly APEX Listener) is running in stand-alone mode
- The database is up and accessible via SQL * MORE and TOAD
- I can access the administration page of the APEX at http://localhost: 8080/ADR/f? p = 4550:10 and navigate between options with success
- Yesterday, I was able to access the login pages of the Application Builder/End User without problem
- Today-
- When I try to access the Application Builder (http://localhost: 8080/ADR/f? p = 4500:1), after I put in my username/password work/name space, I get:
- When I try to access the Login Page of the end-user (http://localhost: 8080/ADR/f? p = 110), I get:
It seems that something was badly damaged in the file of the application, but I can't seem to find it. I put in the database market and Restful Services, I re - compile all the objects for APEX_040200, APEX_030200, APEX_PUBLIC_USER and APEX.
And since I can't even at the request of the manufacturer, I am completely stuck. I don't have (consciously anyway) to install plug-ins, but something seems to have went wrong.
Thought I'd make it here until I leave but a re-install.
Thank you
John
Ended up having to blow the database, re-create the database and re-install APEX. In the end, it appears something was badly damaged, but I could not understand that.
-
Hello I would like to create a Muse site with homepage and a member area with access code to access the other page of the site is possible this? Thank you
No. you're looking completely in the wrong place. These things requires a dynamic system that is appropriate like Wordpress, Joomla and so on. That or a paid Business Catalyst Pro account.
Mylenium
-
Cannot access the web page of the wrt54gx router
I configured my wrt54gx as point of access by disabling the DHCP and assigning static IP address 192.168.0.6. My main router is a wrt310n. My access point works very well when it is connected with a wire to the wrt310n.
I want to reonfigure the wrt54gx to use it as a main router again. To do this, I am unable to connect to the webpage wrt54gx.
Any suggestions?
Thank you
You should be able to connect to the WRT54GX and configure it from there. If it does not, simply unplug the WRT54GX of your other router and reset to the default values by using this procedure:
To reset your router by default, follow these steps:
(1) turn off all computers, the router and the modem and disconnect from the wall.
(2) disconnect all the wires of the router.
(3) turn on the router and let it start up completely (1-2 minutes).
(4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
(5) turn the router.
(6) connect a computer cable to port 1 of the router (NOT to the internet port).
(7) turn on the router and let it start up completely (1-2 minutes).
(8) the power of the computer (if the computer has a wireless card, make sure it's off).
(9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
(10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.
If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem
If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.
If you need additional assistance, please indicate your ISP, the make and model of your modem, the firmware version of your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.
Please let me know how things turn out for you.
-
To access the administration page remotely of two interconnected WRT610N?
I'm sure that I've done it before, but I can't remember how. Let's say I have TWO WRT610N which are interconnected...
Router 1
IP: 192.168.1.1
Connected to the modem (Internet)
Remote 8881 value port
DHCP enabled
Gateway mode
Router 2
IP: 192.168.1.2
1 LAN port connected to the LAN port of Router 1 2
8882 value remote port
DHCP disabled
Gateway mode
Now, I want to be able to type the WAN IP address that connects to the Router 1 and be able to access the Router 1 or router 2 admin page.
Thus, for example, say that my WAN IP is 68.96.215.121
Router 1
68.96.215.121:8881
Router 2
68.96.215.121:8882
How can I do this?
Strange. 8882 to 80 single port forwarding should work.
You cannot change the web interface on the side of LAN port. All you can do is disable/enable http and https, which means using the port 80 (http) or port 443 (https). You cannot change the ports.
Why do you need to access the webinterface of the second still? It is not really a lot, that you can change on this one because it is only an access point and the switch...
-
I bought jointly, Priemer elements and Photoshop elements. I downloaded photoshop successfully. How can I get access to the
Download the Web page for the elements of Prime Minister?
Garyl21385743 what version of Premiere Elements you are wanting to download? You can download the latest versions of Premiere Elements to products download Premiere Elements | 10, 11, 12, 13. You can also find links to the installation files for most retail securities of Adobe Creative Software to to other downloads.
-
To access the template Pages on Time Machine
Hello
I'm tying to access my template Pages stored on my time from a laptop Machine. I have access to the time machine but can't seem to find the record that I'm looking.
On the laptop that I use, I use the "Go to the Finder folder" option and enter "~/Library/Containers/com.apple.iWork.Pages/Data/Library/Application Support/User Templates. It takes me to the page templates on the laptop that I use.
I am wanting to use this same command inside the time Machine to Access Pages templates that are placed in memory.
I tried 'Shift - command - G' and entering "~/Library/Containers/com.apple.iWork.Pages/Data/Library/Application Support/User Templates", but it just brings back me to the Pages of laptop models, not the machines of the era.
Your help is appreciated,
Stophen.
Use the step to go on record to land inside your local user Pages v5 models folder as you have indicated.
Then click the Time Machine icon in your Dock. This will open the same folder of your last Time Machine backup location. You can then select a current model to restore or go back in the history of Time Machine and select a model in a previous backup, Time Machine. When you find the model you're looking for, click on restore.
Maybe you are looking for
-
Satellite C660-258 - Internet connection issues
Recently, my laptop started to suffer serious problems when you try to connect to the internet.My download and upload slow to a crawl (only for laptop) Usually (according to speedtest.net) I get around a download about 4 but on my laptop it reaches m
-
Want to upgrade RAM HDD & on Satellite P10 - 304
Help, please I have a Satellite P10-304. There is only a tiny 256 RAM and 30 GB hard drive.Can I put both? I was looking to upgrade to 2 GB ram at least and 120 to 160 GB of hard drive.Looked at the pc world, I know not which is compatible with mine.
-
readers of connection but the VPN network not showing
I have a couple of Windows machines that work very well, so I certainly have the correct information for VPN. When I hit 'Connect', it does not seem to connect to the VPN with success and I can see the data traffic in both directions. After that, I t
-
My computer does not recognize my new printer correctly
Well, it's on me. I got a new printer for the College, a HP Photosmart C4680. After you run Setup of the printer, I plugged the USB cable on my computer before actually running the pilot, and now my computer refuses to recognize the printer correct
-
How can I restore my system XP to factory settings with on a boot disk? System Restore won't let me back to a date. I need to clean and start over with on a XP boot disk.