Access the BIOS in Windows 8.1.64

Similar Questions

• Problem of access of the bios under windows 8

  Hello

  Since the update my pc windows 7 to 8, I have had problems with the BIOS I can access is no longer the bios by pressing f2 on my keyboard, I've been on people to sort for weeks to try to get this problem but I have anywhere below are a list of things I've tried
  1. communicate with my Packard bell manufacturing gave no progress if the question has been reassigned to tell me it was a software problem with windows
  2. I contacted a local technician who did not know what the problem was
  3. I contacted Microsoft answering service who told me that I should try to access BIOS through advanced, startup was missing why it worked several important things like
  The UEFI firmware settings and use a device (firmware settings is very important because it allows the pc to boot directly from the bios)
  4. I contacted Proton an independent company with experienced technicians, who suggested the same thing as Microsoft
  Thanks for any help in advance.
  James
   

  As you do not access the BIOS from Windows at all, not sure how this is a Microsoft issue.  The BIOS is what starts after the POST or Power On Self Test.  Then the BIOS takes over and from there it resets the Windows MBR to start.

  Therefore, hit F2 before you see anything to do with Windows, while F2 is the key used to access the BIOS Setup.  As soon as you see something to do with Windows, it is far along the boot process and you must try again.

• Satellite U940 - cannot start or access the BIOS settings

  I try to help with a HARD on a U940 disk failure. The laptop still works a failure has been (almost certainly) the entire HARD disk.

  I have a new HARD drive in place but I'm unable to access BIOS, and the machine does not start of course. Just a black screen while the computer is trying to do something...

  • Then put the F2 on does not work
  • Then put the F12 on does not work
  • Then put the ESC on does not work
  • Out the battery did not work
  • Out the battery and the power cord and the discharge by pressing the power button / stop for 60 seconds, did not work.

  I can't get to the BIOS. In my view, that the machine was based on the Intel hybrid disc stuff using the DDI in RAID before and this quick book has been activated. Of course, I am unable to clean the machine to stop more since I can't start up with the old drive.

  What I really want to do, is to put everything back. Get rid of any RAID stuff and put Windows on the new HARD drive. Any ideas how I can get into the BIOS to move all of the RAID or FastBoot stuff?

  Posted by devondan
  

  I try to help with a HARD on a U940 disk failure. The laptop still works a failure has been (almost certainly) the entire HARD disk.

  I have a new HARD drive in place but I'm unable to access BIOS, and the machine does not start of course. Just a black screen while the computer is trying to do something...

  • Then put the F2 on does not work
  • Then put the F12 on does not work
  • Then put the ESC on does not work
  • Out the battery did not work
  • Out the battery and the power cord and the discharge by pressing the power button / stop for 60 seconds, did not work.

  I can't get to the BIOS. In my view, that the machine was based on the Intel hybrid disc stuff using the DDI in RAID before and this quick book has been activated. Of course, I am unable to clean the machine to stop more since I can't start up with the old drive.

  What I really want to do, is to put everything back. Get rid of any RAID stuff and put Windows on the new HARD drive. Any ideas how I can get into the BIOS to move all of the RAID or FastBoot stuff?

  Is it possible to disable hybrid sleep physically? Remove the CMOS battery? Replace the memory? I can't do it from the software or access the BIOS and I wonder if it is what keeps a clean boot.

• Satellite Pro S500-14Z - how to access the BIOS?

  Hello

  on the Satellite Pro S500-14Z I can´t access the BIOS via F2 and can´t change the bootpriority through F12. By pressing F2 or F12 during startup, the S500 beeps and restarts. When you first start, I had access to the Bios and set the password and active supervisor module TPM. Since I have no access to the BIOS before Windows starts. Is there another key to access bios (I tried ESC, DEL, F1, INS) or how can I change the pw supervisor (I know my real password!) and disable the TPM?

  Thank you
  Karl

  Hi karlS_1,

  Normally you can access the BIOS if you press F2 before Windows starts. It works with an external keyboard?

  You can change some settings in the BIOS using Toshiba HWsetup. This tool is preinstalled on your laptop and you can change the order of boot with this tool.

• HDX18: Cannot access the BIOS with F10

  Try to access my BIOS to set the boot on USB device sequence. Can't!

  Power and press F10 repeatedly does not bring me in the config of the BIOS beeps fair to me when my keyboard buffer is full and then continues in charge of the operating system.

  Never see option to press the keys to access BIOS either.

  Thanks for trying to help out.

  My system is a laptop from earlier versions of Windows 8 (2010) and MUST have posted the option to enter in the configuration at the start, but didn't. I had previously improved OS 32 bit to 64 bit - who created another folder Program Files, which in turn have brought masses of disk space. I then upgraded to Windows 10 and did not like the slow, he ran then, I wanted to install a clean Windows 10 and created a bootable USB device. That's when I found I couldn't access the BIOS to change my boot device.

  After trying everything I could find without success, I started the machine and once Windows has loaded, I pressed the SHIFT key and select restart. This brought me to the screen Menu UEFI. I went to watch each of the options - no led me across a good kind, I moved back to the main menu screen and clicked on continue - go out and continue to load Windows.

  After getting a black screen, I can FINALLY see the option - press ESC to enter Setup... Hooray!
  
  Problem solved - for now!

• Cannot access the BIOS on the Satellite L40T-A202

  Hello!

  Months ago, I've updated the bios of my laptop Toshiba L40T-A202. After reboot I can't access the bios. I fixed it by jumping the jcmos into the mobo. Now the problem occurrd again and I can't seem to fix it with the same problem I did.

  Can someone help me? This laptop was bought abroad and I don't want to spend a lot of cash and send it to the repair shops.

  Please help me on this.

  > I fixed it by jumping the jcmos into the mobo
  With this action, you certainly killed the guarantee. I really don't understand what was the reason for this action.

  For a better understanding, I have a few questions for you:
  Have you successfully updated the BIOS?
  You can start your machine properly?
  See Toshiba welcome screen on startup?
  Windows starts as usual?

• Cannot access the BIOS on my Satellite U940-11 t

  Hello

  I have a problem with my computer.
  I installed a dual-boot Ubuntu/Windows 8.
  I disabled the UEFI mode in order to install Ubuntu. But now I have more access to Windows, and I can't go into the BIOS menu to activate the UEFI.

  I tried all possible combinations (F2, ESC, F12, F10, F8, DEL,...) and none of them opens the menu of the BIOS.

  I read on a forum that if I put my battery, it will work, but it didn't.

  How can I access the BIOS? Is there a secret combination that I have not yet tried?

  Thanks for your help.

  The F2 key is the right one to access the BIOS.
  Try this method:
  Press F2, and then press the power button to power the unit in place.

  By the way: Windows 8 and 8.1 Win requires the permit secure boot and UEFI boot mode.

• How to access the BIOS on Portege ct 3010

  I have a ct Portege 3010.
  When I had, it had Windows 98 installed on it, but I wanted to put Linux on it, so I could learn that.

  So I tried to get into the Bios to boot from my CD but could not get into the Bios or really do anything. Thus, in a final attempt, I reformatted the hard drive.

  Now, I can't not in what either.
  Can anyone help?

  I tried every button I thought me could get into the Bios and even tried to hit all, no one can seem to hit me.

  Hello

  To access the BIOS, you must use and press ESC immediately after that Portege was the power upward.

  But if I understand you right, you want to boot from the internal CD/DVD drive.

  Well, you can also try to press the C key.
  This would allow the start-up of the STRANGE.

  On the other hand, pressing F12 button would you used to activate the start on-screen menu.
  Then, choose the CD/DVD drive to boot from the CD-ROM.

  Check it out

• Satellite L50T-A196 - how to access the BIOS

  Hello

  I just bought a new laptop Toshiba Satellite L50T-A196 and it worked very well and the great until recently.

  I tried to reformat my computer because it got crashed.
  I was able to reformat my computer very well in previous years.
  So far, I've reformatted my laptop more than 5 times, but that it was like 1 year ago and now I really don't know how I got into the BIOS menu.

  I tried pressing F1 to F12, holding them and also repeatedly pressing it.
  Also tried pressing F2 and F12 or ESC + F12 F2 before even looking at computer and then turn it also I tried pressing 0 too and also ESC and the ~ button.

  Nothing seems to work.
  So my question is how to enter the bios?
  I used to be able to get, but now I don't know what happened

  Help, please!

  Hello

  _Firstly! _
  You need to perform a full stop down.
  Here's a HowTo:
  [Perform a complete shutdown in Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]

  The fact is that Win 8 keeps the laptop but the unit carries out hybrid stop start up more quickly. Unit should be stopped in order to access the BIOS.

  After the unit is OFF, turn on again and press F2.
  Now you should be able to access the BIOS

• Cannot delete from disk HARD/BIOS password, to access the BIOS on my Satellite L855 - 16 p

  Hey everybody,

  So I decided to install Ubuntu and the password I put up (via the bios hard disk) will not let me access bios. I tried to access it boot advanced, tried all start on the start buttons, but nothing happens. So basically, I want to delete this password and I can't access bios.

  I use Windows 8.1 Toshiba Satellite L855 - 16 p PSKAEE.
  ACPI BIOS Flash version 6.70
  Can you help me with this disappointment?
  Thank you in advance.

  Stand by. What do you mean with that I can't access BIOS? Want you say you can not access the BIOS in general settings or the pattern is BIOS password?

  If there is problem with password BIOS none of us can help you with this. You should contact the nearest Toshiba service provider and they can remove BIOS password for you.

• How to access the BIOS on Satellite L670-134

  Hello

  I need to access the BIOS, but I don't know the key combination.
  Tried F1 F2 DEL Backspace etc that none worked.
  I think I activated an option such as quick start once before... when I turn on the laptop I see not all postscreen, the screen remains black after turning on the laptop, and then the windows logo appears.

  So, how to access the BIOS!

  Hello

  Usually, you can access the BIOS by pressing the "F2" immediately after that the laptop was turned on!
  Try this once more. Alternatively, you can press F2 repeatedly to be sure that this has been accepted.

  Also try key INS all by turning on the laptop and then F2

• How to access the Bios on HPE - 520

  How can I access the BIOS on my HPE-520? My system contains only a HP 2.4 GHz wireless keyboard, so after the start of my keyboard is not found before Windows is running. This PC is not a PS2 Connector and a USB keyboard will not work until Windows is running... How can I get into the BIOS or change VT-settings?

  Hello

  You can use the USB wired keyboard and then access BIOS.

• To access the BIOS on a K430 settings

  How to access the BIOS settings on a K430, say, change the order of boot devices?

  Hi penguin247,

  The following methods will allow you to access the BIOS on the Ideacentre K430:

  1. reboot the PC and continually hit F1 on the screen of lenovo

  2. for models of Windows 8, go to the settings of the UEFI firmware

  Once you are in the BIOS, go to the Startup tab > boot sequence to change the boot order of the installed devices.

  Link to photo

  Link to photo

  Concerning

• HP pavilion h8-1230: how to access the bios pls help

  How to access the bios and I got windows 7 but to give birth to windos 10 with the thing free upgrade I got Pls Help

  Immediately after pressing the power button to turn on to start by pressing the F10 key.

• How to access the BIOS on an Acer Aspire V3 - 571 G-9636

  How to access the BIOS on an Acer Aspire V3 - 571 G-9636.

  I want to disable UEFI and secure boot.

  I tried pressing F2, from switching on the laptop of a closed state.

  I tried to hit once, several times he spamming on boot to the top. The laptop still start with windows 8 and I want to remove.

  It is an old NET, but I see a lot of traffic to it if I want to provide an official solution for her. The thread is locked because of his age, please pick up a thread to update or do not hesitate to post your own!

  Here's the article on How to access the UEFI (BIOS) for Windows