Access the drivers cannot support page for any stream 7

Long story short, I've updated my HP Jet 7 Signature Edition of win 8.1 to gain 10 TP. everything worked well, but because I did an update instead of a new installation of win10 TP, I was running short of space on the C: drive, so I decided to do a clean install of win 10 TP. Now, nothing works, so I have to download the drivers from the HP support page.

Now when I enter the support page for any model of the jet 7 (including one fact, I, model 5709), I always get the same message:

"We have to find the drivers for your product. Pilots may be developing, so please, check back at a later date or visit the product home page. »

How is that possible? I ussed support page, including the drivers, just 3 weeks ago and all drivers for each piece of hardware was there. Now its empty. Is there a problem with the help of HP at this time?

Greetings

Hello:

Unfortunately, the support pages do not work for most new PC HP.

It has been like this for about a day now.

Since I'm not employed by nor do I represent HP, I do not know when they will have pages working again.

Come back again later.

With the Independence Day holiday in the USA weekend, I wouldn't wait it to be taken care of immediately.

Tags: HP Tablets

Similar Questions

  • Create a shortcut on the desktop the icon comes back to a 'globe' for any shortcut, I create. It does not cover the actual icon as shown in the url or web page. Any ideas?

    Create a shortcut on the desktop the icon comes back to a 'globe' for any shortcut, I create. It does not cover the actual icon as shown in the url or web page. Any ideas?

    Hi Ronnie,.

    I see that you can not create a shortcut on the desktop. I'll help you with this problem.

    1. What is the brand and model of the computer?

    2. what operating system is installed on the computer?

    3. what security software is installed on the computer?

    4. have you made changes on the computer recently?

    5 is the issue limited to the creation of shortcuts on the desktop?

    6. How do you try to create a shortcut on the desktop?

    Please provide us with more information to continue troubleshooting as a result.

    See the link on how to ask questions or help on the Forums.

    Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

    Thank you.

  • When trying to start the disk check procedure, I get the answer, "cannot open volume for direct access. How can I fix?

    I get the above answer everytime I turn on the computer. (This is with AutoCorrect blocks checked). If I leave blocks unchecked, it follows a procedure 3 pass without rebooting and does not produce a result.

    * original title - to try to start the procedure of checking disk I get the answer, "cannot open volume for direct access. How can I fix? I ran the GET Microsoft virus check tnd an own result.*

    The application-specific permission settings do not authorization for the application server COM with the CLSID
    {DCBCA92E-7DBE-4EDA-8B7B-3AAEA4DD412B}
    the user NT AUTHORITY\SYSTEM SID (S-1-5-18). This security permission can be modified using the Component Services administrative tool.

    In the opposite case

    http://blog.ray1.NET/2008/01/WinXP-SP3-DCOM-system-error-dcbca92e.html

    http://TechNet.Microsoft.com/en-us/network/bb545879

    http://www.blackviper.com/wiki/Network_Access_Protection_Agent

  • New ProBook G1 450. WiFi won't turn. No such driver on the HP driver support page.

    In short:

    the Wifi on my new ProBook does not illuminate. Device Manager indicates that the device driver for the Wifi does not load and may be missing or damaged. It is said that the wireless device is an Intel Dual Band Wireless-AC3160 with Bluetooth handset device. HP driver support page is not a driver for this wireless device.

    Data sheet:
    ProBook G1 450
    Windows 7 Professional 64 bit
    Wireless: Intel Dual Band Wireless AC3160 with device combined Bluetooth

    In more detail:

    This is a new ProBook G1 450, which I'm still doing basic settings I've not yet added my programs. I'll put up the pre-installed operating system preinstalled with HP programs.

    There the code connects to the internet via an ethernet cable and I downloaded several Win 7 HP updates in this way. But it does not connect via a wireless network. It does not recognize that there is Wifi signals in the area. My old Thinkpad and my tablet to recognize a number of strong Wifs in the region and easily connect to the one that I am authorized to use. The ProBook said that there is not a wireless in the region.

    The ProBook WiFi is apparently disabled. The wireless light is turned on (white) and when I click on the appropriate icon, there's a message saying that Bluetooth is activated, but the Wifi is turned off.  Light is supposed to turn on if Wifi or Bluetooth, or both are enabled, it is not a malfunction if it lights up when turned on the only. But I have not yet tried Bluetooth.

    Many other ProBook G1 450 apparently have a Ralink wireless device or other devices. Not mine. Apparently my ProBook has an Intel Dual Bank Wireless-AC3160 with Bluetooth handset device. That's what told Device Manager. And this device can be great or maybe even a nice improvement. However, unfortunately, the Device Manager also said "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). »

      The page of HP support for downloads of driver for my ProBook has no driver for such a device with wireless Intel.

    I did not try the wireless until you install many updates to Win and HP. As I noticed the problem of wifi, I found that it not install HP update: it was for 5 Hotkey support. Since then, I amhaving a little trouble with some other updates. I mention this in case it is interesting, but I can't see any link between these updates and Wifi.

    Help!

    It is resolved.

    It was a driver problem. I had looked for the driver on the page of intel as well as the disk HP support page and it has not been found. But I looked back to the page of the Intel wireless driver and judge. The tricky part is that the pilot is not directly under Intel Dual Band Wireless-AC 3160: no driver is listed directly for her. But intel brings together a large number of drivers wifi under the Intel PROSet/Wireless software. If you use the Intel Driver Update Utility 2.0. It updates the PROSET/Wireless software, and then this software installs the updated wireless driver.

    My ProBook came with the Intel PROSet/Wireless software, but it is version 16.x.x.x. update the Intel page, is now 17.1.0.19.   He has in turn updated Daul Band Wireless - AC 130.  And now the s easily connects to Wifi.

  • to access the variables in a page in another page qml

    Hey gang,

    I've been watching some of the other problems autour to access the variables from one page on another page qml qml, and I can't get this to work.

    I have a page, main.qml with a NavigationPane.  The NavPane has a Page and some containers.

    I have a property defined in the NavigationPane like this:

    NavigationPane {
        id: mainNav
        backButtonsVisible: true
        property int customInt: 2
    
        onCustomInt: {
            console.log("  -------------> App: customInt");
        }
    

    I have a ComponentDefinition for next page, called SettingsPage.qml.  In the settings, I have two drop-down lists and a slider.

    Page {
        actionBarAutoHideBehavior: ActionBarAutoHideBehavior.HideOnScroll
        id: pgSettings
    
        ScrollView {
            id: pageScroller
            scrollViewProperties.initialScalingMethod: ScalingMethod.AspectFit
            Container {
                topPadding: 25
                bottomPadding: 25
                rightPadding: 25
                leftPadding: 25
                Label {
                    text: "Settings"
                    textStyle.fontSize: FontSize.XLarge
                }
            Container {
                id: dropDown1
                topPadding: 25
                bottomPadding: 25
                rightPadding: 25
                leftPadding: 25
                DropDown {
                       id: ddOption1
                       title: "Option 1"
                       verticalAlignment: VerticalAlignment.Center
                       horizontalAlignment: HorizontalAlignment.Center
                      Option {id: o1o1; text: "One"; }
                      Option {id: o1o2; text: "Two"; }
                      Option {id: o1o3; text: "Three"; selected: true; }
                      Option {id: o1o4; text: "Four"; }
    
                    onSelectedIndexChanged: {
    
                        switch (selectedIndex){
                            case 0:
                                //
                                console.log(" -->App: Option 1 Selector, On");
                                customInt = 0;
                                break;
                            case 1:
                                //
                                console.log(" -->App: Option 1 Selector, Off");
                                customInt = 1;;
                                break;
                            case 2:
                                //
                                console.log(" -->App: Option 1 Selector, Top (default)");
                                customInt = 2;
                                break;
                            case 3:
                                //
                                console.log(" -->App: Option 1 Selector, Bottom");
                                customInt = 3;
                                break;
                        }
                    }
                }
            } }
    

    I look forward to the the statement will change the level property NavPane, called customInt, but it doesn't.

    the output of the console shows that the ' App: Option 1 selector "gets selected in the dropdown list selected index changes, but the onCustomInt() funtion slot never gets called.

    I tried "mainNav.customInt = X" too, but the parameters cannot solve the mainNav.  I get "unknown symbol 'mainNav'" error with alittle bulb.

    what I am doing wrong?

    When you call the second page, SettingsPage.qml, set it as an object.

    Don't do the following:

    attachedObjects: [
    
        ComponentDefinition {
            id: settingsPageDefinition
            source: "SettingsPage.qml"
        }
    ]
    

    Follow these steps:

    attachedObjects: [
        // Definition of the second Page, used to dynamically create the Page above.
        ComponentDefinition {
            id: settingsPageDefinition
            Settingspage{
    
            }
        }
    ]
    

    Then the second page main navigation page in the IDE.  I had the same problem with a multi-page application, I created.

  • I've set up another configuration of TCP/IP, but it does not connect. I need to access the 3 different machine networks. Any ideas?

    I've set up another configuration of TCP/IP, but it does not connect. I need to access the 3 different machine networks. Any ideas?

    original title: alternate tcp/ip

    If by "alternate TCP/IP configuration" you mean the settings on this screen--> http://tinyurl.com/42kbqqz, then, to quote Inigo Montoya, "you keep using that Word. I don't think it means what you think it means. »

    The 'alternative' configuration settings tab, if you select "IP address private auto" (APIPA) or "specified user" is only used IF "obtain an IP address automatically" is set on the tab 'General' (http://tinyurl.com/8p9hn) AND the adapter cannot get an IP from a DHCP server.

    Most cable networks use a DHCP server to automatically assign IP addresses.  In this case, just plug your Ethernet cable and you're automatically configured and connected.

    If the problem is that your network requires a static IP address (that is, they use a DHCP server to automatically assign IP addresses), you will need a third-party network settings manager.  If you have an IBM (Lenovo) ThinkPad, you can use "Dial-up connections." IBM Otherwise, see this Google search (I have no experience with any of the applications shown, so I can't comment about them): http://www.google.com/#sclient=psy&hl=en&source=hp&q=network+configuration+switcher&pbx=1&oq=network+configuration+switcher&aq=f&aqi=g-v5&aql=&gs_sm=e&gs_upl=23l1333l1l1599l12l8l0l0l0l5l278l1344l0.7.1l8l0&bav=on.2,or.r_gc.r_pw.&fp=74e371c96a48f4b&biw=1024&bih=649

  • Can someone help me with the error message C:\Program Files\Windows Live Gallery\WLXPhotoviewer.dll the system cannot find message for message number 0 X %1 in the message for %2 file?

    Can you help me? I can't open my Jpeg images in Windows Live Photo gallery. I get this error message;

     C:\Program Files\Windows Live Gallery\WLXPhotoviewer.dll the system cannot find message for message number 0 X %1 in the message for %2 file?

    I use Vista Home premium 32-bit.
    Cheers, Rob.

    Hi robgrimes

     

    As the issue seems to be specific to Windows Live Photo gallery, you can contact the Windows Live support team. I would recommend posting your query to community specific to Microsoft Windows Live. Please visit the link below to find a community that will provide the support that ask you in the right direction for Windows Live -http://windowslivehelp.com/product.aspx?productid=20

     

    I hope this helps.

  • Hi, I can not paste the copied text of pages for Adobe applications, why is this? I have can´t even paste text in InDesign...

    Hi, I can not paste the copied text of pages for Adobe applications, why is this? I have can´t even paste text in InDesign...

    Duplicate thread: I can´t paste the copied text in any application adobe... InDesign, Photoshop, Prime Minister...

  • How to display the current page and the total number of pages for a group

    Hi all
    I have a requirement to indicate the current page number and the total number of pages for a group. For example:

    < A >
    < 1 >
    Row1
    row2
    ....
    Clotilde
    < / 1 >
    < 2 >
    Row1
    row2
    ....
    Clotilde
    < / 2 >
    < 3 >
    Row1
    row2
    ....
    Clotilde
    < / 3 >
    < /A >

    Now my requirement is Group 1 can have lines going into several pages say x, so I need to show with in the Group 1 x and on the next page page 1 page 2 x etc.
    Although Group 2 spans several pages, I need to see page 1 of y... etc.

    Can someone help me please how to do this?


    Thank you
    Sunny

    Try if@section

  • Dvd - cd rom on my laptop (Acer Aspire 5515) stop working, I get a code 19 saying that windows cannot access the drivers for this device., how can I solve this problem?

    I had used the Device Manager, try to reinstall the drivers fix for windows etc nothing works

    Hello

    ·         Did you make any changes before the show?

    I suggest that you run the fixit provided in the link below and check if it helps:

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  • Installed the network updated drivers hp support page now I get the blue screen of death

    Installed the network updated drivers for my laptop hp support page and now I get the blue screen of death a few minutes of Internet usage.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5171...

    I can reboot the computer, but it only works for a little bit before again becoming the blue screen.

    I tried to download and reinstall the hp 8 drivers network twice now. (Product number: QJ793AV-#ABA)

    I am running windows 7 (x 64) and downloaded all the updates as well.

    Any help would be greatly appreciated.

    I made an another windows update and seems to be ok for now

  • What happened to the support page for my laptop

    I have a laptop of HP ENVY 15 TS, it is a month.

    Yesterday the HP SUpport Assistant managed to take me to the HP online resources, today when he tries the HP site returns an error indicating that the product number is not recognized.

    Product number: E6B23EA #ABU has not changed.

    I have another problem after windows 8.1 u/g (slow stop) so I wanted to install the latest drivers, but HP seems to have other intentions of my new baby.

    Any suggestions would be welcome.

    Hello:

    This is the page for support and drivers for your model:

    http://h10025.www1.HP.com/ewfrf/wc/product?product=5399917&cc=us&DLC=en&LC=en&query=E6B23EA&tool=

  • Cannot access the BEFSX41 router Config page Win 7

    Hi, I have a BEFSX41and am not able to access my router from any browser config page I have on my system. I use IE and FireFox and when I punch in the IP address for the router there is just there and about 30 seconds later, says that there is a mistake and that the connection has been reset. It is a 64-bit installation and I also have another computer that goes through the same router, is 32-bit and doesn't have this problem.

    I added a NEW driver for my Realtek NIC and it still happens. Another machine that I have on my network ALSO has a Realtek NIC but can still access the router config page.

    Someone at - it else here has the same problem?

    OK, problem solved. I used a different IP and the problem disappeared, thanks for the help.

  • Inability to access the drivers win 7 x 64 for Satellite C50-A-1JT

    SER. Numb 5E052585U
    Prod. code PSCJGE-00100FY4

    Tried with more computers, but always the same links do not work
    Not a single link for win 7 x 64 driver does not work!

    It would be useful to download drivers for win7 drivers all in one drivers pack... (win7pack RVD)...

    Help, please

    Hello
    I checked the download from Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and you will find 18 drivers, tools and utilities for your laptop model.

    I tried to download some of them but I've noticed the same problem. I assume that there is a temporary problem with the servers. Try please download them all later.
    > It would be useful to download drivers for win7 drivers all in one drivers pack
    Something like this is unfortunately not possible. Each driver, tool, or utility must be downloaded separately, one by one.

  • Cannot access the options of color management for HP 6700 Mac OS 10.8.5 (Mountain Lion)

    Hello.

    I have the HP Officejet 6700 Premium e-all-in-one, and I can't find any way to access the color management options.

    The printer is attached (Wi - Fi) to my iMac Mac OS 10.8.5 (Mountain Lion).

    I want to correct a magenta cast for the photos I printed.  I had the problem of magenta-cast in Lightroom and use Preview to print the photos, so now I want to work with color profiles in Photoshop Elements.

    Photoshop Elements is recommended I have 'disable color management in the printer Preferences dialog box.

    However, I am not able to find for the 6700 color management preferences in settings under Mountain Lion:

    Not sub (Apple) > System Preferences > print & Scan.

    Not sub (HP utility) > Open Embedded Web Server.

    Not sub (HP utility) > the printer settings.

    Non-print preview dialog.

    I can't find any clear directions in the online help (HP or elsewhere) that I've read so far.

    Any suggestions would be most appreciated.

    Thank you!

    Michael

    Hello

    Thanks for the reply and the screen shot.

    The first thing I want to do you is to reset the printing system.
    OS X Mavericks: reset the printing system

    Then add the printer, however when it by adding not just click on the name of printers, click Add printer or a scanner. Make sure that the 'use' is set to the printer and not Airprint.
    If it is displayed as Airprint, you will be missing feautres compared to the actualy printers driver.

    After that, I'll provide you know several documents that you may find useful to perform this task.
    Documents from HP:
    Color management for the HP inkjet printing products new generation
    Advanced color management overview

    Apple documents:
    Mac OS X 10.6: edit images using ColorSync Utility
    Mac OS X v10.6: about ColorSync

    Document from CNET:
    How to use ColorSync Utility to assign color profiles in OS X

    I know some say 10.6, but they give you a reference and the idea, trying to do what you are.
    Please let me know if that helps.

Maybe you are looking for