Access the laptop on a computer Toshiba Satellite A300 recovery Partition

What main features press on to have Toshiba Satellite A300 to start the recovery partition?
On a Gateway PC you need to press and hold Alt + F10, and then press Esc and Alt + F10 to access the recovery information on the hard drive without the CD
I do not have access to the recovery CD and I just want the laptop to boot from the recovery partition and restore 32 bit Windows Vista OS.
Your help would be appreciated!
ViComputers.ca

Hello

I hope that this document will help you - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

Good bye

Tags: Toshiba

Similar Questions

  • How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

    How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

    Go to the Toshiba support site and search page of your PC/computer laptop.

    Download and then install the last set of specific drivers for W7.

    See you soon,.
    Jerry

  • Satellite A300 - recovery partition is lost

    EDIT:
    Thanks to a recovery software, I saved the file "HDD RECOVERY" an all other files that were in another folder in C: D: (the corrupted partition)

    Now, how can I burn a cd/dvd of recovery from this folder?

    --------------
    I have the Satellite A300-21w which came with a HD 320 split into 2 partitions: C: D & a Vista Home premium:
    The D: partition that contains the "HDD RECOVERY" folder was accidentally damaged by me and now the system only display the C: partition.
    I tried to run the Toshiba Recovery Disc Creator but it shows the message: could not find file "hdd recovery."
    How can I restart my laptop?

    Post edited by: melauf00

    To burn the recovery disk, you have the Toshiba recovery disc creator.
    This program is preinstalled on your laptop from the image of Toshiba.

    But that's why the folder HDDRecovery must be on the D drive as far as I know. Otherwise it s is not possible.

    If you create a partition of D again. Maybe it works.

  • Cannot start the Toshiba Satellite A300 in normal mode or safe mode.

    Original title: Normal and safe mode start two taped please wait

    Hi my problems started last night when I tried to open my laptop (Toshiba Satellite A300 Windows Vista)

    In normal mode starts near the top of the screen loads fine up please wait...
    I left on until this morning that then the screen turned black and nothing was clickable.
    I can't boot mode safe either, as it happens the same thing.
    Sometimes when I try and start it tells me that the C drive has something wrong with it and what are the fixing.
    A warning saying that this file is corrupted and unreadable left me with a scintillating display that fluctuated between black and the background of vista.
    I managed to log on once while my office quickly froze and I had to close my laptop.

    Startup Repair cannot detect all problems. I restore Windows to an earlier date with the system restore but that did nothing to help and when I tried to restore the system to an earlier date of even the sign of a catastrophic failure rises.

    I'm really ideas outside the restoration of factory settings.
    Someone please help.
    Thank you

    Hello


    Have you tried another recovery option?
     

    I suggest you to press the F8 key as the computer starts up to the top and check the option in the advanced boot menu.
     

    Advanced, including safe mode startup options
     
     

    If you are able to open the advanced boot menu then you can execute the menu command prompt and type the command and check.
     

    Type CHKDSK c:/r or

    Type CHKDSK c:/f
     

    Important: even if running chkdsk on the drive if any bad sectors are found, chkdsk attempts to repair this sector and if all data on this sector it could get lost.
     

    If you are not able to perform the steps then you may need to get the Vista installation DVD. You can contact the manufacturer for more details.
  • PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

    Vista - Windows 7 network connection. username and password is unknown.

    Hello

    I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

    If someone could answer this question, it would be great.

    Hello
    Maybe this can help.

    Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

    Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

    Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

    Public share
    = network Public (as Internet Café) in order to reduce security risks.

    For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

    http://www.ezlan.NET/Win7/net_name.jpg

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq.html#trusted
    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    ------------------------------

    If your network consists only of Win 7 and you want a simple network, use it.

    http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

    After you have configured the homegroup, scroll to the bottom for the Permission/security section.

    -----------------------------

    Win 7 networking with other version of Windows as a work network.

    In the center of the network, by clicking on the type of network opens the window to the right.

    Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

    http://www.ezlan.NET/Win7/net_type.jpg

    Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

    Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

    Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

    Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
    Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

    Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
    Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

    -------------

    If you have authorization and security problems, check the following settings.

    Point to a folder that wants to share do right click and choose Properties.

    In the properties

    Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

    This screen shot is to Win 7, Vista menus are similar.

    http://www.ezlan.NET/Win7/permission-security.jpg

    The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

    When everything is OK, restart the network (router and computer).

    * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

    * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

    ---------------------

    *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Cannot access the laptop and Skype settings

    Original title: cannot start laptop settings and other applications

    Good evening

    I have some problems with Windows 8. I used to have a problem with what appeared to be shortcuts that arises simply any key I pressed on the keyboard, so a friend of mine helped me by changing a few things on PC settings (do not know what she did do). Given that (not sure if precisely from that day) that I can not open the PC settings, or even Skype... help please?

    Thank you

    Hello

    This problem may occur because of file system corruption.

    Please help me with the following information related to this issue:

    1. What is the brand and model of your computer?
    2. You receive an error message when you try to access the settings of the PC?
    3. When you say no access to Skype, are you referring to the modern version of Skype or the desktop version of Skype?
    4. You are able to access other applications apart from Skype?
    5. You receive an error when you try to access Skype?

    Check if you are able to access the laptop settings by following the steps mentioned below:

    • Press Windows Key + C.
    • Click on Search.
    • Type laptop settings.
    • Click PC settings and check if you are able to access.

    Please follow the steps mentioned below:

    Method 1: I suggest you to run the Design Checker (SFC Scan) system files because this can be a problem with the corrupted system files.

    System File Checker is a Microsoft Windows utility that allows Windows users to find and restore corruptions in system files

    Monitoring of file system (CFS) and then check if it solves the problem.

    Follow these steps:

    1. Press Windows Key + X.
    2. Click prompt (Admin).
    3. At the command prompt, type sfc/scannow and press enter.

    See also: http://support.microsoft.com/kb/929833

    Method 2;

    You can check the issue on another user account. If you already have a different account created on your computer, please check the question about it, try to create a new user account and control.

    You can check the link for create another user account:

    Create a user account

    http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

    Please answer us on the State of the question as well as the information required to help you further.

  • Console buttons multimedia Toshiba Satellite A300-08WB do not work

    Hey all,.

    I reinstalled the driver and I restored my computer but the buttons backlit Toshiba multimedia Console still does not work.

    Any help appreciated.

    Cheers, Levi

    PS. would it not under warranty

    > I reinstalled the driver and I restored my computer
    This means that you have used the Toshiba Recovery disk?
    Have you created a Toshiba recovery disc at the beginning?

    I think that if you didn't use the recovery disc, then the question refers to the missing part of the driver or software

    But Satellite A300-08WB is not known to me what model number of the laptop is it?
    You can find the numbers at the bottom of the unit

  • Re: Toshiba Satellite A300-129: Windows XP installation

    Hi people,

    I have a question regarding Toshiba Satellite A300-129;
    I would like to install Windows XP on it (because of stability issues with Vista), but when I enter in the configuration of Windows XP, I get the message that Windows Setup did not find any HDD installed on this computer, even if the BIOS says there is one installed. Do I need a driver disk to install Windows XP on this machine?

    Thanks in advance!

    Allan

    Hello

    I guess, you should integrate sata drivers:

    http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  • How to activate the Ricoh SD/xD/MMC in Satellite A300 @ Ubuntu Intrepid Linux?

    Hello

    I have a laptop Toshiba Satellite A300 PSAGCE 1 1 M
    and I installed Ubuntu Intrepid with kernel 2.6.27.11 (I did not
    because Linux is better and faster than Vista and free... I did it
    because I'm working with simulation of calculation, and I need Linux in this
    machine).

    Unfortunately does not have a single resource: Ricoh SD/xD device.
    But he is identified by the Linux kernel and it has loaded modules to be controlled (I guess).

    That I have to do to run my xD/SD/MultiMedia Card? (I put an xD card, and there is no message in the newspaper).

    My paper, hardware and modules are:
    _ # SDHCI connect messagens: _

    Bq. + $ dmesg | grep-i sdhci + \\+sdhci: Secure Digital Host Controller Interface driver +------+ sdhci: Copyright (c) Pierre Ossman +------+ 0000:04:06.1 pci sdhci: controller SDHCI found [1180:0822 | http://forums.computers.toshiba-europe.com/forums/] (rev 22) +------+ 0000:04:06.1 sdhci-pci: PCI INT B-> GSI 17 (low)-> IRQ 17 +------+ 0000:04:06.1 pci sdhci: will use DMA mode even if HW does not fully support it. +------+ mmc0: controller PCI - 0000:04:06.1 - using DMA + SDHCI

    # Modules SDHCI _: _

    Bq. + $ lsmod | grep-i sdhci +------+ sdhci_pci 17024 0 +------+ sdhci 27396 1 sdhci_pci +------+ 67168 1 sdhci mmc_core +.

    Information of pci RICOH _ #: _______

    Bq. + $ lspci | grep-i \\+04:06.0 ricoh + FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 controller (rev 05) + \\+04:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) + \\+04:06.2 system peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) + \\+04:06.3 system peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) +.

    _ # 04.06.X pci information newspaper: _

    Bq. + $ dmesg | grep-i '04:06 ' +------+ PCI: 0000:04:06.0 reg 10 32 bit mmio: [d3100000, d31007ff] +------+ pci 0000:04:06.0: supports D1 +------+ pci 0000:04:06.0: supports the D2 +------+ pci 0000:04:06.0: SME # D0 D1 D2 D3hot D3cold supported +------+ pci 0000:04:06.0: SME # disabled +------+ PCI: 0000:04:06.1 reg 10 32 bit mmio: [d3100a00, d3100aff] +------+ pci 0000:04:06.1: supports D1 +------+ pci 0000:04:06.1: supports the D2 +------+ pci 0000:04:06.1 : SME # D0 D1 D2 D3hot D3cold supported +------+ pci 0000:04:06.1: SME # disabled +------+ PCI: 0000:04:06.2 reg 10 32 bit mmio: [d3100900, d31009ff] +------+ pci 0000:04:06.2: brackets D1 +------+ pci 0000:04:06.2: supports D2 +------+ pci 0000:04:06.2: SME # supported from D0 D1 D2 D3hot D3cold +------+ pci 0000:04:06.2: SME # disabled +------+ PCI: 0000:04:06.3 reg 10 32 bit mmio: [d3100800, d31008ff] +------+ pci 0000:04:06.3: media D1 +------+ pci 0000:04:06.3: supports D2 +------+ pci 0000:04:06.3 : SME # supported from D0 D1 D2 D3hot D3cold +------+ pci 0000:04:06.3: SME # disabled +------+ ohci1394 0000:04:06.0: PCI INT B-> GSI 17 (low)-> IRQ 17 +------+ ohci1394 0000:04:06.0: 64 latency timer setting +------+ 0000:04:06.1 pci sdhci: SDHCI controller found [1180:0822] (rev 22) +------+ 0000:04:06.1 sdhci-pci: PCI INT B-> GSI 17 (low)-> IRQ 17 +------+ 0000:04:06.1 sdhci-pci: will use DMA mode even if HW does not fully support it. +------+ mmc0 : controller on PCI [0000:04:06.1] SDHCI using DMA.

    Thank you for your attention.

    Post edited by: RafaelBarreto

    Hello

    Have you tried to find the answer on some Linux forum?
    Toshiba doesn't support Linux for this model of laptop and I don't think that anyone here can help you.
    If you will find some useful info please post it here.

    Good luck!

  • Update BIOS on Toshiba Satellite A300-1MW

    Hello.

    I have Toshiba Satellite A300-1MW with version 3.5 of the BIOS. Can I upgrade to version 1.7 which I downloaded from the Toshiba site?
    Whay I want to do?
    Because I have a lot of problems with this laptop. For example:

    (1) slow loading on the compatibility mode system
    (2) when I put the AHCI mode and reinstall the drivers SATA then loading is faster, but I have problems with the critical error

    I don't know what to do :/ Maybe I have bad drivers (it is not possible because all the drivers are of the Toshiba site) or maybe I didn't install drivers (there are many drivers on the Toshiba site, I don't not download and install all the)

    Can someone write a list of the drivers I need to install?

    Thanks in advane and have a nice day.

    Yours,
    Tralla

    Hello Tralla

    As I see you have already posted a thread with the same question and I wonder that you ask the same question again.

    You have these problems, because you didn t install WXP correctly. If you want to have many preinstalled WXP and use with full speed use the AHCI settings in the BIOS and load Windows XP Home edition with all SATA drivers.
    After having this laptop will run fast and you won't have problems BIOS update should not be done at all.
    This theme is very often discussed on this forum and please take some time and check this forum on the installation of Windows XP Home edition using the SATA driver.

    Good bye

  • I am looking for camera wizard compatible with toshiba satellite a300

    I am looking for camera wizard compatible with toshiba satellite a300

    This is an English forum. Click on the globe at the bottom of the page and select your language.

  • I have the product key on the back of my computer toshiba laptop but still get a message that windows 7 is not genuine, what can I do?

    My son bought this laptop Toshiba Satellite with windows 7 ultimate and gave our grandchildren for Christmas two years ago. They never used so it brought and I got from my son. On startup, I get a message that windows is not genuine. I've repeatedly tried to activate with the product key on the label of MS on the back of the computer laptop, but message still there. I noticed the first time I tried to enter the product key, there was a different product key in the input fields. I have entered the correct product key but message still there.
    Can someone please help?  Thank you for your time.

    Hello

    I would say allowing you to run the Microsoft Genuine Diagnostics tool then copy and paste the results into an answer here for further analysis:

    http://go.Microsoft.com/fwlink/?LinkId=52012

    Also I suggest you to check your product key and report to Microsoft about the issue.

    Check out the following link to report to Microsoft.

    https://www.Microsoft.com/en-us/howtotell/CFR/report.aspx

  • I can't import my video of my Samsung SC - D 353 camcorder to my computer toshiba Satellite laptop

    I have a SC - D 353 Samsung camcorder I can't import video from my laptop toshiba satellite am running on vista 64-bit, no update is available on this system, is there a universal driver for my laptop to import the videos? am using firewire and it recognizes the camcorder will be not only import. Help!

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

    Windows Vista Compatibility Center

    First thing to do is to check its Vista 64-bit compatibility to the above link, and if not to see what patches/solutions are available from its manufacturer...

    See you soon.

    Mick Murphy - Microsoft partner

  • computer Toshiba satellite laptop reinstall windows 7

    I formatted my computer with Hiren s boot cd and ran magic partition deleted all partitions including drive recovery HARD is there anyway to reload the windows 7 Home premium that was installed I didn't make recovery disks or make a backup that I was trying to start all over again any help would be welcome thanks

    Hello

    You can contact Toshiba and ask them to send you a set of recovery disks.

    Manufacturers that make normally for a fee.

    ____________________________________________________

    Or download the correct ISO file and make your own drive and use the product key located on the COA sticker.

    http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

    And here are instructions on how to burn ISO disk images:

    http://www.SnapFiles.com/get/isorecorder.html

    Then do a clean install:

    http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

    The COA sticker is either or in the battery compartment on the underside of the laptop.

    With a desktop computer, it's on the side, the back or the top of the computer case.

    By using the downloaded ISO file method can require the Activation of phone.

    If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

    "How to activate Windows 7 by phone '

    http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

    The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

    Toshiba:

    http://support.Toshiba.com/drivers

     

    ________________________________________________

    Using the method of USB in conjunction with the Windows 7 download preceding:

    http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

    "How to get and use the Windows 7 USB/DVD Download Tool"

    http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

    See you soon

  • Cannot run windows applications 8 on my computer toshiba satellite laptop

    Hello

    I have a Toshiba satellite laptop and I recently installed windows 8 on.
    but when I try to run windows store applications such as mail, people, message the app is shown as it loads then it is hidden.
    so I can't run any application, it disappears immideatly and does not load.
    could you help me solve this problem.
    Thank you!

    Hi Benjamin,

    For the question links to applications, please try the following steps.

    Method 1:

    You can see the steps from the following link.

    What to do if you have problems with a soft

    Method 2:

    Please check if a proxy is enabled, if necessary, turn it off. Follow the steps below:

    (a) select the Internet Explorer tile on the start screen.

    (b) turn left click on the settings icon in the lower right.

    (c) select Show the desktop. You will be guided to desktop Internet Explorer.

    (d) select settings (speed) icon in the upper right.

    (e) select Internet Options in the menu drop-down.

    (f) go to the connection tab on LAN settings from the lower right of this window.

    (g) uncheck the box that says "use a proxy server for your LAN settings.

    Please post with the State of the question.

Maybe you are looking for