access to computers through internet - to know the IP address

Similar Questions

• Our firewall blocks a lot of sites and I need to know the ip address in photoshop and adobe illustrator activation

  Hello

  Our firewall blocks a lot of sites and I need to know the IP address to activate the photoshop and illustrator. (Inicio sesion Errores, activacion o conexion |) CS5.5 y posterior, Acrobat DC)

  Thank you very much

  Combinations of Adobe host Ports for installation, activation and updates.

  • ccmdl.Adobe.com:80
  • swupmf.Adobe.com:80
  • swupdl.Adobe.com:80
  • https://na1mbls.licenses.Adobe.com
  • https://IMS-NA1.adobelogin.com
  • https://adobeid-NA1.Services.Adobe.com
  • https://na1r.Services.Adobe.com
  • http://activate.Adobe.com
  • https://activate.Adobe.com
  • http://Adobe.activate.com
  • https://Adobe.activate.com
  • ccmdls.Adobe.com:443
  • IMS - na1.adobelogin.com:443
  • na1r.Services.Adobe.com:443
  • prod-rel-ffc - ccm.oobesaas.adobe.com:443
  • LM.licenses.adobe.com:443
  • www-DU1.adobe.com

• cannot access my account and do not know the apartment info from my old password, help?

  as noted above, I need to access my other account that I don't know the password, I have the old password, but I tried several times. any help?

  Hi Harry,

  Please see the below article mentioned on the Microsoft Policy on lost or forgotten the password.

  Microsoft's strategy concerning lost or forgotten passwords

  See also:

  What to do if you forget your Windows password

  Keep secure passwords - Microsoft strategy on move the passwords

• BlackBerry smartphones can not access to MMS and Internet after upgrading the operating system

  Hi all. I am a new user of BB. I got my Curve 9300 three weeks back. As soon as it has been recorded, I was invited 2 upgrade operating system - which I made and subscribed 2 BB Protect. A friend sent me a MMS, but I can't consider my settings r bad. I cannot access the internet most of the time, but can still access site BBerry. Help, please. My carrier is MTN

  OK... so you should do the last thing that I have loaded... contact your operator for formal support. It's them you pay for your service... and they deliver it.

  Good luck!

• Why must know the MAC address cable modem if I bought a new modem cable or ISP company.

  Original title: why the ISP or cable modem company need to know my cable modem MAC address if I bought a new one, beside that received from a modem cable or ISP company?

  Why the ISP or cable modem company need to know my modem cable MAC address if I bought a new one, beside that received from a modem cable or ISP company?

  The cable provides tend to lock their network by MAC address or they assign you an IP address based on your cable modem MAC address.

  Some (for example cable Telewest in the United Kingdom), used to go as far as locking down for the mac address of the PC connected to the cable modem, which is why some routers have the ability to clone the mac address of a connected device.

• When I connect to the start page of mozilla, I can't go to any other sites Web - get "unable to connect to the server", but I'm still able to access the internet through Internet Explorer on the same computer.

  Cannot move to the start page of Mozilla. Any site or search I run, I get a message that Mozilla can not establish a connection with the server.

  See this support article - difficulty of problems connecting to websites after Firefox update

• HP Mini 110 1034NR cannot access to bio, I don't know the password

  I have a HP Mini 110 1034NR Windows XP Home Edition

  I recently installed a new hard drive and had to start from scratch and install the operating system, drivers, etc..

  I went and download all the drivers from the website of HP drivers.

  Everything was find until I installed the driver of a Bio.  It restarts directly in the bios and the bios is locked by a password I do not know.

  I can't start again under windows and I don't know how to recover the password or reset it.

  I get the error message fatal after entering the wrong password 3 times.

  CNU9284KHD

  Can someone help me please?

  Hello

  Please be aware that this is not supported by HP.

  Try to enter: e9lo7uvszt (to be noted that the 3rd character is a lowercase L)

  Kind regards

  DP - K

• How to access button object through its name of the example?

  Hello
  
  I have a button called "mybutton" and on a certain range (No. 10), I wrote this code in the action script:
  
  MyButton.Height = 500;
  
  It does not work and the button size remains the same. Looks like I can't access button like that!
  I want it's on a certain range I want to increase the height of the button. How can I do this?

  Thank you guys! :)
  I used _height and it worked.

• I just upgraded to Firefox 8 and now I can't connect to webpages about via Mozilla. I can always connect through Internet Explorer.

  I've upgraded to Firefox 8 and I can't establish an internet connection to any webpage via Firefox. I removed the Firefox program and re-installed through Internet Explorer with the same results.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• Windows 7 cannot resolve the ip addresses of domain names

  I have a desktop computer that I built components purchased in a major computer store.  I got this system works well for several months, now.  Recently, however, I met a problem with one of the modules of memory of 2 GB.  I deleted (because it turned out to be defective) and, shortly AFTER his withdrawal, have another problem with the resolution of Internet domain name.  I have to say that I also installed my old Windows XP as an alternative OS and updated to sp3 (it is, in fact, that I use to access the internet and write this query).  As you can see, XP I have no problem with internet access or name resolution.  There are two other systems connected to the home network via wi - fi (one equipped with Windows Vista and the other a tablet PC running Windows XP Tablet Edition) and none of them have no access to the internet problem.  I ran ipconfig/release and / renew without any result.

  I did all the following: netsh winsock reset catalog
  netsh int ip reset reset.log
  netsh int ipv6 reset reset.log.
  Still no access.
  I opened regedit and went to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters and set the following registry value:
  Value name: IPEnableRouter
  Value type: REG_DWORD
  Value data: 1 (this is the only value I changed - from 0 to 1)
  I then exit regedit and reboot... still no access.  BTW: I noticed now that this entry (IPEnableRouter), nor any of its values, is no longer even exist in my registry.  I think it has something to do with my changing parameters of Cisco Linksys E1000 router to allow me access to my home network.  In addition, even if she says that I'm connected to my home network and the router, I don't see two other computers in the network, only the items that I share my desktop.
  I changed the "Preferred DNS server" to 208.67.222.222 as instructed in a possible solution I found on the web (in XP, of course) and, when it does not, changed to 208.67.220.220 instructions, but no.  Still nothing.
  I can access any Web site... IF I KNOW THE IP ADDRESS!  Unfortunately, my mind is not enough powerful or with enough RAM to remind all the IP addresses that I never go, not to mention every single IP address in the internet.
  If I had remembered to I have copied to Notepad (so I could then copy here) the results of an ipconfig/all command, but I didn't.  If this will help, let me know and I'll get it and post it.  I know that some errors I have received are 'Windows could not automatically detect the network proxy settings"and"registration of the DNS records failed.  The parameter is incorrect"and" an error occurred during the liberation interface Loopback Pseudo-Interface 1: the system cannot find the specified file. "
  Some of the results of an ipconfig/command all, I write down, such as those that came out as strange or maybe wrong.  They are as follows:
  Active IP routing: NO
  WINS proxy enabled: NO
  Host name: (empty)
  Suffix primary DNS: (empty)
  Node type: hybrid
  DNS suffix search list: News:[email protected] (Yes, I use Road Runner by Time Warner, and no, they were not able to help at all)
  Other results:
  ISATAP.KC.RR.com tunnel adapter
  State of the media: Media disconnected
  Card tunnel Teredo Tunneling Pseudo-Interface
  State of the media: Media disconnected
  Please keep in mind that all computers connected to this wireless router have no problem with access to the internet and this computer can access in Windows XP but not Windows 7.  In other words, is there anything wrong with the router and nothing wrong with the wireless network adapter.  Besides, I tried to reboot the router and even resetting (much to the chagrin of my other significant because she was not happy with not being able to access the internet until I was finally able to re - install the router)
  !).  I have also turned off my system, removed the card wireless adapter, waited for about 15 minutes, re-inserted in the PCI slot and return to market the system.  This, of course, did nothing, either.
  After the search for several days and trying various tactics and bugs as suggested all over the web, I'm at the end of my limited knowledge and patience with this problem.  Any help that will solve this problem and allow my Windows 7 to access, once again, the internet would be greatly appreciated.  As a last resort, I might have to re - install Windows 7, but I also read the posts where others have done so, but nothing helped. :(
  Thank you
  Lakusus
  The system configuration:
  Windows 7 64 bit Home Premium 32-bit of Windows XP Home Edition operating systems and in a dual-boot configuration
  Card mother ASUS M4A89GTD PRO series
  AMD Athlon (TM) II X 4 640 clocked at 3.49 GHz
  2.00 GB of RAM
  Linksys Wireless-G PCI adapt
  Graphics card XFX ATI Radeon HD 5750 card w/1 GB GDDR5 memory
  Two hard drives 1 TB SATA and a 250 GB HARD drive partitioned into a total of 10 discs
  Burner DVD HL-DT-ST DVDRAM

  In fact, I have since fixed my problem.  Believe it or not, it wasn't any major and detailed process.  It was a very simple thing that NONE of the resolutions on that I read even suggested might be the cause, so I don't even think to check it out.  Apparently, at any given time a week ago, or NAME of the COMPUTER, something erased my!  I forgot how I found this, but I think that I went to my device manager by double-clicking on the icon "Computer" and select 'Properties' and happened to notice that, under 'Settings of computer name, domain, and workgroup', the ' computer name: "and" full computer name: "fields were empty!

  SO, I clicked on 'Advanced system settings' on the left of the window properties, select the "computer name" tab (1st one at the top left of the window that has popped up) and down to "to rename this computer, click on change." I clicked on the button 'change... '. ».
  In the next window which displayed I got the name I initially chose for my desktop, clicked the button "More"... ' and 'News:[email protected]' in the ' suffix main DNS on this computer: "on the ground (as is my Internet service provider - others may be different) and ensured that the box"Change the suffix main DNS when the domain membership changes"has been checked.
  Then, I clicked OK on this window.  I then made sure that the "Working Group:" radio button was selected and typed "WORKGROUP" in the field below, then click 'OK '.
  Return to the window' system properties 'original, I clicked 'Apply' and 'OK' and then restarted my system.
  Windows 7 being loading, all of a sudden all these programs that were inactive for the past few days began to appear and load and update!  YAY! Laughing out loud
  So, the reason I went into detail about how I solved it is in case anyone else has this same problem, they can check and, if the computer name has also been deleted, follow these steps to correct the problem. Of course, you will need to contact your service provider (if other than the Road Runner by Time Warner) in order to obtain the primary DNS suffix.  I hope this will help others I do not go through the terror I lived not having access to the internet.  Aaaaarrrrggghh!  I MUST have my internet! LMAO

• How can I find the IP address of a device connected to the switch GS724Tv4?

  I have a Netgear GS724Tv4 switch and I need to know the IP address of a device in the g19 port. Is possible due to the switch to see?

  Thank you in advance.

  Antonio

  Hello DelTorre,

  Welcome to the community!

  Unfortunately, the GS724Tv4 doesn't have a table of IP addresses. I don't see a way on how you can see through the switch.

  Thank you

• Smart way to propagate the IP address addy?

  OK, so I got my wrp400 mostly working. The problem I am always face is that incoming calls always have an audio course. They can hear me, I can't hear them... so after a bit of research and testing and reading and manipulation, I found that it worked:

  Setings SIP...

  Substitute VIA Addr--> Yes

  EXT IP--> my.public.ip.address

  I don't have a public static IP, however. So it's not a long-term solution.

  The problem, of course, is that the vocal part of the wrp400 sends its local IP (10.0.0.xxx) on as its public IP address even if the wrp400 full DMZ, all ports for the public IP assigned and are opened through the wrp400. Basically, he doesn't know the IP address of the real world.

  Why this only happens on incomming calls mash (IMO) revealing some automatic detection that allows the external network router to do with outgoing calls, but on specific incoming calls it internally... it shows just the wrong addy.

  Is there a setting that will force the use of external vs internal IP information?

  I'm not sure that differences with a WRP400 and other Linksys/Sipura devices, but the WRP400 is described in the Guide of Administration of ATA even it should be similar to other maps.

  The NAT Mapping Enable parameter causes the adapter to use its external ip address, if this address is known. The key word here is known. If she does not know the external address, it will use the address he knows, the local network address.  There are several ways that the adapter can discover its external ip address.  One way, as you have learned, is to hardcode the address in the IP EXT: field.  This announcement DogFace05 describes two complementary ways:

  I have found that if you have a proxy configured to register and the registration is successful, if he has received = and a rport = on the sip 200 OK message in response to check the adapter will save the external address and port number back if you asked to do in the receipt handle VIA: / handle VIA rport: the Sip tab settings.  Some voip providers do not include these parameters, others.

  You use a server STUN is a common way to determine the external ip address and external port numbers.  With a STUN server adapter sends several messages on the server and the STUN server sends back indicating the port numbers and the external ip address received.  You can use any STUN server that responds quickly.

  With a STUN server, you usually include substitution VIA Addr settings: and RESP to CBC Send Port:

  A good description of the Support of the NAT settings is located here.

• Assign a static IP address via DHCP based on the Mac address of the virtual machine

  Hi all

  It is especially a feature request, as I'm sure that it is not currently possible to do what I want to do...

  I would like to be able to assign static IP addresses to VM without having to manually configure the network settings of the virtual machine directly. I want to be able to do it from the DHCP settings in the virtual network Editor.

  Most of the routers DHCP allow this. They give an IP address through DHCP based on the MAC address of the client. This means that the customer is concerned that he receives a regular IP DHCP address, but it is never change.

  DHCP is the default option for all OS this makes things much easier to manage, as IP addresses is assigned in the same way, in one place for all DHCP clients, regardless of the client operating system, and without having to manually keep track of which the IP is assigned to which customers etc..

  Also AFAIK at least for Ubuntu, you cannot assign a static IP address without having to also statically assign to the DNS server. It is only the IP address I need to be static, so I prefer not to have to worry about manually assign the DNS server.

  I can just kind of fudge making the really long DHCP lease duration, but the maximum is 99 days only, so finally addresses are going to change, that would mean a whole bunch of reconfiguration for VM services, etc..

  Does anyone know if the workstation 9 has this ability? I am currently on version 8, but I would probably upgrade this function only if she can do it.

  If there is no way to do what I want to directly through the virtual network Editor, can anyone recommend a way to do this, perhaps using Guest only network and then, by running a kind of services to the 3rd party NAT and DHCP on the host?

  Thank you

  Eugene

  There is no GUI option to get what you are looking for, but you can do it manually. Please take a look at Re: assign a static IP to guest with network adapter NAT Virt? where I posted an example.

  André

• Firefox stores the IP address with bookmark?

  When I open a Web site and save a bookmark of it, is recorded in a bookmarked favorite site IP address?
  When I create a bookmark without having to open a Web site, IP address is recorded when I open the bookmark?

  Firefox only takes IP addresses cached for a short time, by default, 60 seconds. As far as I know, the IP address is not registered in the places.sqlite database that stores the history and bookmarks (it is not very effective for data of this short to have validity to go on the drive).

• Contact Search using the IP address

  If you know the IP address of the visitor, can search you for contacts in Eloqua?

  Hi guys,.

  It is possible to do.

  First of all, make sure you the profile view to have the field profile called "IP address".

  If you run any report of visitor and get the returned data, you can filter the IP address. If the contact associated with this IP address is in your database, you will see them, otherwise the person will be listed as unknown ad.

  In this exercise, you will discover the same person can have multiple IP addresses, it is common that we are working in different places and are always on the move. You will also find l discover several people using the same IP address, which is normal.

  I hope this help you.