Access to my files on a nonadministrator account administration user account.

Under windows Vista. I have an administrator user account on my machine, but it does not appear in my list of 'change user '. I can only connect to my computer via a nonadministrator account. I'm trying to access the administrator account, but it is apparently requires a smart card is inserted. If only I could get the ADMIN user account to appear in my user account to log on, I could enter my password.

Hello

You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).

Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.

Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215

How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

How to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

BE VERY CAREFUL IF YOU USE THIS ONE:

DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.html

Use the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.

You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.

You can run the Admin account hidden from the prompt by if necessary.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).

Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • Cannot access Windows Gadgets because the message only the administrator is permitted.

    Original title:

    I am logged on as administrator (only 1 person on this computer) but I get messages that only an administrator can access some files (for example the Windows Gadgets))

    I have Windows 7 Ultimate, only one person has this computer (me), I installed as admin (no other account on this computer).  Cannot access Windows Gadgets because the message only the administrator is permitted.  I AM THE ADMINISTRATOR!  Why is this happening?

    Hello

    1. you only receive the error message when you try to access the "Windows Gadgets"? What is the full error received?

    2 have you made any changes to the computer before the show?

    Method 1:

    Step 1:

    Check if you are able to access to the files and programs into account administrator in safe mode.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Restart the computer to return to normal mode

    Step 2:

    If you are able to access all files and programs to the account administrator in safe mode then I suggest that you create a new user to the administrator.

    Create a user account

    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    Method 2: Try the steps from the following link and check:

    How to open a file if I get an access denied message?

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

     

  • Limited to issues of access to user files: cannot open files C:\Docs and directory All Users\... of limited account

    Developed an application, I am having trouble hosting different user accounts. In an attempt to debug, I created a user account on my XP development machine I've ever done before. Programming within this limited user account, I can test the existence of a file in the "C:\Docs and Users\etc all..." to see that there are, but I can't open it to read.

    How can I access the files for purposes of development while maintaining the limited account so I can test that the system works for all computers it willl be used on and all their different configurations of users? Or perhaps, where can I find information on where and how to manage the application data, so I don't run into these issues? What I saw before me had to believe given to all users is available to all users!

    Thank you.

    Sneaky Hi,

    As you mentioned, you developed the application, you can ask your question in the MSDN forums for assistance.

    http://social.msdn.Microsoft.com/forums/en/categories/

    Hope the helps of information.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • my user account is 'administrator', but am still denied access to the file I want to access.

    I click on certain folders or files to access and a window pops up saying: "access denied."  Nevertheless, I have a user 'administrator' account, so why would I refused access?  I'm really tired of Windows 7, doing so and would like a replacement that will allow me access to WHAT I want - after all, it's MY computer, not Microsoft!

    Hello
    1. are you aware of any hardware or software changes, prior to the beginning of the question?
    2. is the computer connected to the domain?

    Method 1:

    You can also try to give permission to the files.
    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

    Method 2:
    If the problem persists, we create a new administrator user account and transfer all the data to the new user account. Link below will help you to create a new account and transfer all data and information
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    I hope this helps. Get back to us with results.

  • Privacy of user account: my daughter (standard user) can access my files on my Administrators account

    My daughter (standard user) can access my files on my Administrators account via his account by clicking on the C drive, then users on my account. How can I change this to my documents remain private.

    I have now managed to do my private account managers. I'm pretty sure by default, it is created to share with my standard account of girls and no password is required to access my documents. It would be interesting to know if anyone has had this problem I only stumbled on this. Thanks for the everyone entry.

  • access to the files compressed after disk clean

    I have Windows XP Media Center Edition Version 2002 SP3. Two nights ago, I ran Disk Clean Up and Defrag to improve speed. I used compress old files for the first time. Tonight I tried to access certain personal records and documents and they went. When I run a search for them, they are not accessible and are moved to the folder of My Documents and Settings or gone completely. I can only assume that this is due to the use "compress old files". How to access these compressed files?

    You say that you are missing a lot of files and folders...

    Compressed file always appears in a Windows search and will be in a default blue color.

    If you think the specific name of some of the files you are missing or part of the name, see if they find themselves in a search for Windows and if they do, where they are.  Adjust the search with more advanced options and tick the boxes in system folders search, search hidden files and folders, hidden files and folders, and search subfolders (this way it will look everywhere).

    Using Windows Explorer, navigate to the desktop, then the (Local Disk (C). assuming that XP is installed on your C drive

    Below, you should see the Documents and Settings folder, open then, and you will see a folder for each user on your system (and perhaps some that you do not recognize).  Each user has a folder under Documents and Settings.

    Double-click the folder associated with your user name (for example, Andrea) and you will see a My Documents folder that belongs to you.  Look in here and see what you can see if you understand how it works...  Look in my pictures, my videos, my music, etc and see if you see one of your items.

    Then go back up to the Documents and Settings folder and open the folder associated with the next user (even if you don't recognize it) and look in the Documents folder for this user (for example the Documents of Jose) and search there and see if you can locate your missing documents.  Repeat for all users folders Documents and see if you can find your stuff.

    I can't imagine what happened to your stuff, but thinking that perhaps your XP user profile has been corrupted somehow and when that happens, XP login with an account that works will record and you get connected, but this new account will have all the documents in it since they'll be in the Documents folder for another user whose profile corrupt (maybe).
    If this is the case, you can fix it, but you should see if you can find your stuff first.

    Anywho, use Windows Search to search for specific files or even wildcards as type names and see if you can determine if the files are actually missing or are just in other places when you are looking.

    I use the word "stuff" a lot today for a reason but that is my style of back.

  • Impossible to the configuration file of the access to the error in XP mode: "is client\users\administrator is not accessible.

    Original title: can not access the configuration file because I'm not the administrator, even if I'm the only person who uses this computer

    I bought Windows 7 Professional on a new computer, because a program that I use every day may run in XP mode.  Configure XP mode and when it asked for a password that I left it empty and press to enter.  When I try to enter in the file config on XP the message "is client\users\administrator is not accessible." You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permission.

    I downloaded the andxp of MS virtual pc mode because this 8 year and plu program will be run in this mode.  I copied the old computer config file and you want to replace the file loaded when I installed the program on the new computer.  Who will save me load all data files (more than 80) and not to recreate the data in these files that I changed. I installed the program from the original disc and it is implemented very well except for the config file.

    There are two user fence: virtual XP-admin and virtual user of XP-88950xp.

    The only program I installed XP mode is this one.

    Thank you.

    Hugh Humphreys

    Hi Hugh Humphreys,

    Leave the password empty section and see if the XPMUSER can be accessed.

    Method 1: If the problem persists, you can try to access Windows XP Mode with the default account named "Administrator". This account appears when we get into Safe Mode. By default, there is no password for this account, and the password is determined when you set up the Windows XP Mode. We can use this account to reset the password of the other accounts password. To do this, follow these steps:

    (a) Firstly, disable the integration features.

    (b) restart Windows XP Mode. When the Boot Menu appears on startup, press F8. (Continue to press the F8 key until the Windows Startup menu is displayed.)

    (c) on the advanced Windows Menu of Options, select Safe Mode and press ENTER.

    (d) log in Windows by using the administrator account and the password.

    Note: The password is empty by default unless you already set a password.

    (e) after the connection mode safe, click on "Start", go to "run", type "nusrmgr.cpl" (without the quotes) and press ENTER.

    (f) choose the user you want to change and click 'reset password'. Set a new password.

    (g) click on "Advanced" tab, click on the button "Advanced".

    (h) click on "users". The choice of the user you want to edit in the right pane. It to the right and click on "Properties".

    (i) check the "password never expires". Click on 'OK'.

    (j) then exit the settings and restart Windows XP Mode to normal mode.

    Method 2: Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:

    (a) when he asks for a password, click Cancel. Without integration feature, you are allowed to log on with an account that does not have a password.

    (b) set a password for your current user.

    (c) click on tools on Windows Virtual PC, choose enable integration features.

    i. type the password, check the box "Remember my credentials" and click OK to open a session.

    II. after joining the domain, logon in XP mode with the local administrator account.

    Reference: http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/thread/45f3f241-3d0a-43f7-8baf-c64ab3a8a76d/

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/3eba3150-8742-4264-be9f-0daaad2282cd

    If this does not work, post your request in the TechNet forums to get help.

    http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  • I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer.

    I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer. The computers are connected by a switch, fixed IP addresses that are correctly configured and point to a DNS server outside the network. When I try to open the icon for one of the computers, he asked for credentials. I try to type the user name for the computer that is sharing the resource and the password. It is the user account whose computer is loged on and belongs to the Administrators group. for example: user name (Computer1\username) password (password). It does not work. The Windows Firewall is disabled on all computers. It worked well there 2 days. I can't find anything wrong with the network settings. Does anyone have a solution? Thank you.

    If the portion of the machine has activated - Simple file sharing (i.e. it is XP Home or it is XP Pro with Simple (default) file sharing) - while all file sharing connections authenticate as user 'guest '.  It will not matter what username / password you provide, it will attempt to authenticate as 'guest '.  If the guest user has received a password or the guest account is not active, you will experience the symptoms you describe.

    If the serving machine running XP Pro and Simple file sharing is disabled, then you should be able to connect by specifying the user as computer\user and the password to connect.  To turn off Simple file sharing:

    "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
      <>http://support.Microsoft.com/kb/307874 >

    Also:
    "Description of the account in Windows XP"
      <>http://support.Microsoft.com/kb/300489 >

    HTH,
    JW

  • cannot launch the nonadministrator account application

    Nonadministrator account software failed to update and run.  It has worked well (was able to update and roll) in the admin account.  The limited nature of the nonadministrator account (with limited privileges) is originally the app to freeze?  If so, is there a way to configure windows authorization to permit an exception to this particular application?

    Hello

    · Have you logged on as a computer administrator?

    · You receive an error message or error code when you try to update the application?

    · Are what application you referring?

    · Provide information about the edition and service pack installed.

    See: to set, view, change, or remove permissions of files and folders: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/acl_inherit_permissions.mspx?mfr=true

  • How to access the files or records of the administrator

    Hello

    My Toshiba Satellite A-105 recently crashed and I need to reformat the drive, but first I wanted to backup my files from the hard drive. I bought an external hard drive enclosure, set up and plugged in my other computer (healthy). It worked fine except that I can't access my files/folders administrator (since the drive hard laptop crashed). It is said "G:\Documents and Settings\Ray are not available. Access is denied. "It is also my father's account and other accounts are available. I want to know, is there a way to get around this, in any case to access our valuable files/folders on the administrative account?

    Thank you
    Randy

    Appropriating a file or a folder under Windows XP [Q308421] - http://support.microsoft.com/?kbid=308421
    How can I get the Security tab in the folder properties? - http://www.dougknox.com/xp/tips/xp_security_tab.htm MS - MVP - Elephant Boy computers - don't panic!

  • Unknown user account has taken control of many documents and media files. How to remove this user.

    We created an unknown accout on my laptop Windows 7 did it probably a malware or some kind of virus. This unknown account took all permissions including the special permission. In this way, he blocked my access to a lot of my documents and multimedia files. This unknown account does not appear in the list of user accounts. Thus, it cannot be deleted or modified/restricted. I tried to detect this virus/malware microsoft security essentials and MacAfee antivirus programs. The two could not detect something. Any help?-ERC

    Hi CED,.

    Thanks for posting in the Microsoft Community.

    I'm sorry to know that you are facing a problem of unknown account. It would be useful that you can answer these questions to help you further.

    1. How do you know that it is an unknown account? You receive messages or error codes?

    2. where are the documents and multimedia files stored?

    3. have you made a recent software or hardware changes to the system?

    If you are referring to an unknown account with a SID string, then try these steps and check if it helps.

    a. go to the folderwhere you saw this string SID.

    b. right-click and select Properties. Click the Security tab.

    c. If it is there, then click on the Edit button, then click the Remove button.

    If you are told that you cannot delete this account because it is to be inherited, and then close the dialog boxes and set up a folder in the tree and repeat the procedure. Keep this up until you can remove the ""unknown account " SID in the permissions dialog box."

    You can also check the suggestions provided by Marilyn O, moderator of the Forum on July 9, 2012 and check if it helps.

    How to remove an unknown account on the Security tab in windows 7?

    Important: The above link contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information, you can view the article:

    Back up the registry

    I hope this helps to solve the problem.

    If you need further assistance, please answer and we will be happy to help you.

  • Access to the file is denied. You don't have permission to access the file C:\PROGRA~1\Office14

    Hello

    I created a new e-mail account and fails my.  Running Microsoft Office 2010.

    When you open outlook, I get the error:

    Access to the file is denied.  You don't have permission to access the file Email C:\PROGRA~1\Office14\*** address is removed from the privacy * address email is removed from the privacy *.

    Cannot open your default e-mail folders

    Click Help and I get the following message:

    This error can occur if you attempt to run Outlook in a Terminal Services session when the Outlook offline (.ost) data file is used by the console session.

    To access this instance of Outlook, exit the current Terminal Server session, and then start a new session using the following run command in Microsoft Windows:

    mstsc.exe/console you must be an administrator on the computer that accesses the console session. You can not access a console session of a computer that is running Microsoft Windows XP Home edition. But you can do this from a computer that is running Microsoft Windows Server 2003, Windows XP Professional, Windows Vista, or Windows 7.

    For more information, see article 826488 in the Microsoft Knowledge Base.

    You must make sure that your e-mail records are kept in a place outside system such as C:\Program Files folders. It is a restriction of the UAC.

  • Windows 8.1 - permissions of files - do not have access to the files since the abolishment of all permissions except for the system and my own useraccount.

    I had to put in my computer to the repairshop, so I changed the filepermissions on a large foldertree to all permissions for my own useraccount and all permissions for the SYSTEM account, but deliberately deleted the permissions on this folder to 'Administrator', since the repairshop started getting their own account and I had to make that account a member of the Administrators group.

    Now I'm stuck with a bunch of folders and files (strangely, this didn't happen to * all * files under the folder in question) that I can't read or delete, when logged in as the useraccount with all permissions on the files. I've tried everything, and while I had to click on a dialog box explore asking me to provide administrator access to subfolders in the folder in question, some folders becomes fully accessible (possibly), but some button blown up a "Try again" in explore a dialog box - which has sometimes worked but for some records * didn't * work to resume the TP to my own files.

    I want to know how I can find the full access to these files.

    Talk about the size of a cargojet bug...

    If your own username is a member of the Administrators group, then all you have applied to this group is for you also.

    I would like to start by trying to change only the owner of the files to yourself.  Apply and when finished, close all.  Then go back and change only the permissions that should be easier now that you own on everything.

  • Error code (impossible to access the critical file) 42 while reinstalling creative cloud?

    I'm trying to reinstall creative cloud on a MacBook Pro with the Mavericks. I currently have more complete creative cloud installed, but I get errors when I tried to update the creative cloud application. Now when I try to install it, I get error code 42: ' we encountered the following problems: Setup could not access a critical file.» Please try installing again. »

    SAngye.IJ currently logged under a restricted account?  If not and you are connected under an administrator account, then it is likely that file under your current user account permissions have compromised.

    I recommend you review your Setup logs to determine the location where the file permissions have is compromised.  You can find details on how to locate and interpret logs installation troubleshooting install problems with log files. CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.

    You can also find details on how to change the permissions of the file in error 'Output 6' or ' exit 7 "|"» Install log | Read, write, file system errors. CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

  • If I change my Firefox browser rather that Internet Explorer, I've always will have access to my files that were saved using IE? Please an answer non-techie.

    I received notice that my browser (IE) is obsolete and will be soon be unsupported. All of my files have been saved in Internet Explorer, and I'm afraid I won't be able to access it if I change to another browser, but I'll soon lose access to them in any case, I guess. Is this true? Do you have any suggestions? I am a person without a lot of tech knowledge please answer using the no-tech language.
    I may answer since my person tech is my daughter who may have questions or slower information.

    Thank you.

    Yes, you will still have access to your files even if they have been saved through IE.

Maybe you are looking for