Access to portable XP Windows 7 computer machine.

Similar Questions

• Unable to access the files from Windows 7 computer to Windows 8

  Hello

  I have Word 2007 on two computers, and each has Windows 7 or 8.  I'm trying to share with homegroup.  My goal is to keep my documents on Windows 7 system and access the files (read and edit) the system of Windows 8. I don't want multiple documents, I want just one version.

  After you open the docx Word read-only, I did some research and discovered that if I go to the file on the computer with Win7, made a right click on the file, then select residential group read/write, I would then be able to access the computer of Win8 file and edit and save it.  I was able to do this.

  OT: Word 2007 ReadOnly

  To make sure that I could continue to do so, I tried again (by selecting the docx on the Win7 system since the system of Win8).  I received one copy read the second time.  What should I do to edit and save the Win8 computer capabilities, without having to physically run to the Win7 to allow access?

  Thank you

  Hello

  Thanks for posting your question in the Microsoft Community.

  The description above, you want to computer Windows 7 to Windows 8. I'll be happy to help you on this question.

  This problem may occur if the file share on the computer are not correctly enabled. I suggest you try the steps from the following links:

  Share files and folders on a network or shared PC
  http://Windows.Microsoft.com/en-in/Windows-8/share-files-folders

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Share files via public folders
  http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Portable drive Windows 7 computer repair software

  Need help to find the right place to download and burn a CD (or USB) to attempt to repair the hard disk.

  I have a HP Notebook 2000-410US Windows 7 64 bit.  Diagnostic test does not have the short DST.  I know that it means that I have to replace the hard drive.  I have a few files out there that are not supported to the top and perhaps others that I missed in the manual backup operations.  I was stupid, now I know.

  I would like to be able to use a boot disk in the CD or USB port that has a chance to temporarily repair the hard drive so that I can try to restore these files before I replace HD or similar drasticness.

  Past the warranty.

  Series: {information}

  Product: A6Z99UA #ABA

  Hello:

  You can do an installation disc W7 simply by reading the info on the link below.  You only have to worry about the info about express reference on the boot media.  The product key and the rest is necessary if you plan to use the disk you did to reinstall W7 instead to purchase recovery discs.

  When you start from the disc, there will be a repair option on the lower left corner of the screen.

  Link to downloads ISO of W7 is below. Download the Windows 7 version that is on your product (Home Premium, professional or ultimate) key to apply.  SP1 Refresh of media files are the latest ISO files.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

  Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a DVD or a 4 GB flash drive using the USB compilation method.

  Use the product key of windows 7 of 25 characters to activate your installation.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Then go to the support of the PC and driver page to install the drivers you need.

• Windows 7 computer portable HARD drive connected to a professional XP S3

  Windows 7 computer portable HARD drive connected via USB to a desktop XP Professional SP3 PC.

  PC shows the folders, I have access to the folder of Photos, but cannot access the Documents folder where files I need. I tried to share the folder, but it does not work.

  Any suggestions please?

  Probably, this can be corrected by taking possession of these files / directories.  Once you do this, however, you will find probably your permissions in disarray try to re - install the drive in your computer to Windows 7...

  "How appropriate a file or a folder in Windows XP"

  <>http://support.Microsoft.com/kb/308421 >

  HTH,

  JW

• All network devices can see each other + Windows 7 computer, but machine Windows 7 can not see them

  Hello. Under the network of my machine Windows 8 folder, I can see all the devices on the network. This includes a printer, my computer Windows 7 (what I can access), an Apple TV (from special software), a wireless hard drive, the router and a digital recorder.

  The Windows 7 machine, I can only see the router and the printer. On special software, the Apple TV does not either. When you perform the Windows 8 computer host as a server for the special software, the Windows 7 machine could not see it on the special software. This means that there is something wrong on the Windows 7 this machine is not allowing him to detect other devices.

  In a game of LAN, Windows 7 and Windows 8 computers can't see each other.

  All devices are on the internet and I am posting this from the Windows 7 machine right now.

  Windows 7 and Windows 8 machine are on the same network.

  No device is on a host group and the group home service is disabled.

  Peer networking is enabled.

  Network discovery is turned on.

  Both connections are set to private/Home.

  Originally, the Windows 7 machine has been on his own home group and could be seen by anything. After a few hours, I finally got out of the home group, how other devices could see him then. However, he cannot always see other devices.

  How can I get the Windows 7 machine to see other devices? I am at a loss. Is there a service that I have disabled right now that needs to be enabled? I don't know what to do.

  Hello

  Please contact Microsoft Community.

  Disable the security software and check.

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Also check out the link below and check if that helps.

  Why can I not see other computers on my network?

  http://Windows.Microsoft.com/is-is/Windows7/why-can-t-I-see-other-computers-on-my-network

  If the problem persists, or you have questions about Windows, let know us, we will be happy to help you.

• A windows 7 computer cannot access a file share on another computer windows 7 in a home network, but others can.

  Hello

  "You don't have permission to access \\computer x\c. Please contact your network administrator to request access to ' I want to be able access all computers on my network, whether they are Windows 7 64-bit or Windows XP Pro machines.

  All computeers can access Internet and my printer.

  I'm unable to access files on one of my computers on my home network to a PC running Windows 7. The same PC can access most of the other files on the other PC. I have a mix of XP Pro and Windows 7 and they are defined as a working group not a homegroup. To complicate the isue is a laptop computer that cannot access this computer either. But the facts are that two Windows 7 PCs that appear to have identical settings cannot access both another windows 7 PC.  I guess that the unreachable PC appropriate sharing as other computers on the network can access.

  How can I change the target of the PC share permissions so I can access it from any computer on the network? Or maybe the question is from the other computers that access computer is blocking access to the setting on the PC that can't?

  All computers can view the readers there is a problem if a drive is empty, why report it: "you are not allowed..." »

  Hello

  Refer to the suggestions for the following links and check:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  I hope the above information helps!

• How can I give a specific computer FULL access to a Windows 7 computer?

  Can someone tell me how to give a specific computer in our full access to 100% of the network of small size for my Windows 7 computer?  We have a windows NT based CNC machine (I'll call that the CNC) which is having a moment difficult to communicate with my Windows 7 computer (I'll call the PC).  When I had windows XP I easily found a place to enter the IP address of the CNC and that seemed to do the trick but, in windows 7 there is about 8 zillion different options and I don't know where to get what I want to achieve.  The folder that needs to see, on the PC, CNC is already shared.  The CNC can access the shared folder, but he forgets that it is available whenever it is stopped.  The NT machine sees it essentially as a mapped drive.  Every morning I have to tell it where is the drive.

  Hello

  I would recommend posting your query in the TechNet Forums. The community of IT professionals in the following TechNet forum will be able to help you the best.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  Hope the information is useful.

• Access error to the my windows X 64 machine EBiz...

  Hello

  I recently installed EBS 12.1.1 in my Linux operating system. When I tried to access the login page and the responsibility of my Windows X 64 machine, I get the below error:

  To access this application, you must install the Plugin of J2SE version 1.6.0_07. To install this plugin, click here to download the executable oaj2se.exe. Once the download is complete, double-click the oaj2se.exe file to install the plugin. You will be asked to restart your browser after the installation is completed.

  
  

  
  

  
  

  I tried to install the version of Java 1.6.0_07 and uninstall other versions. I tried to restart my computer several times after installation, but nothing has worked

  
  

  

  
  

  
  

  Can someone help me get rid of this error?

  
  

  PS: I use Internet Explorer version 11
  

  Internet Explorer version 11 is currently not certified with EBS - pl use a certified browser version - MOS Doc 389422.1

• I have PS CS3, (Version 10) installed on my Windows 7 computer. It works very well. I will be able to access if I switch to Windows 10?

  I have PS CS3, (Version 10) installed on my Windows 7 computer. It works very well. I will be able to access if I switch to Windows 10?

  I expect to for Windows 10 for the kernel is not very different when I upgraded I lost my homegroup when I upgraded the machine that created the homegroup key has been lost and the machine was not part of the home group.  My display device drivers needed to be updated after the upgrade for my poster work properly. A pilot to ditch virtual use to connect my Surface Pro 3 as a third screen was not functional. Remove and reinstall it solved this problem.  Everything else seems to work well.   If you do not bind the user accounts on your machine to Microsoft accounts these user will be second class but spy with less.  Things like Cortana, people, installing applications, and others require you and Microsoft accounts allowing Microsoft to collect information...

  If you look at the web there is little negative feedback of those is upgraded and something like 14 million have updated.   Only the stars of the press sensation are their stories, that you should take them for what they are worth.  Its their job to make new worthy or not.

• Want to access the text file of ODI linux machine installed on windows

  Hi all
  
  I want to access the text file of ODI linux machine installed on windows computers.
  To do this, I created the server data files (physical schema) and;
  
  Host(Data Sever): IP address of the linux machine
  User: user of linux machine name
  Password: data
  
  Directory: / hyperian/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1 / * application *.
  I shared the folder app in linux machine.
  When you try to run the interface using this file inside the folder app, its giving below error
  
  
  7000: null: java.sql.SQLException: file not found: /hyperian/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/app/STORAGE.csv
  java.sql.SQLException: file not found: / hyperian/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1 /app/STORAGE.csv
  
  to com.sunopsis.jdbc.driver.file.x. < init > (x.java)
  
  at com.sunopsis.jdbc.driver.file.d.b.d.a (d.java)
  
  at com.sunopsis.jdbc.driver.file.g.a (g.java)
  
  at com.sunopsis.jdbc.driver.file.w.executeQuery (w.java)
  
  at com.sunopsis.sql.SnpsQuery.executeQuery (SnpsQuery.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt (SnpSessTaskSqlC.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  
  at com.sunopsis.dwg.cmd.e.k (e.java)
  
  at com.sunopsis.dwg.cmd.g.A (g.java)
  
  at com.sunopsis.dwg.cmd.e.run (e.java)
  
  at java.lang.Thread.run (unknown Source)
  
  
  One faces this question erlier? then helpme out.

  Hello

  1. If your files are located on a remote file system, you will need to copy one of your files to the computer that Designer ODI runs to allow ODI retrieve the metadata of the file information.
  2. in the topology to create a physical schema, the directory you enter data and the scheme of work must point to this local file.
  3. then set the file data store in the designer of the ODI. Enter a name, browse and select the file and fill each deposited the files tab.

  * If it's a fixed file, click on the network icon in the column into the columns tab and have checked auto adjustment.
  * If it is a delimited file, use the reverse button on the columns tab to reverse the columns.
  * Right-click on the Datastore folder select View Data, if you can view the data, which means that store file data has been correctly set.
  * If this is not the case, check each tab of the database file to make sure that everything is set correctly and try again.

  4. once the display data to be successful, now change you directories (data and the scheme of work in topology) to point to the remote file system. These directories must be accessible to the ODI Agent that will be used to perform transformations. The directory can be an absolute path (m:/public/data/files) or a parent in the ODI Agent startup directory (.. files/demo /). It is strongly recommended to use a UNC (regardless of the location of execution) name for the path. Executing transformations "agentless", the directory is relative to the directory where Oracle Data Integrator was installed.

  You must have an agent process running on the system that contains your source file.
  Then during the race, the odi interface choose this agent.

  Thank you
  Fati

• Remote Desktop 6.0 error - try remotely on a Windows 7 computer from an XP machine

  I have a XP machine and a Windows 7 computer, we are trying to remote into the XP machine. The two machines are connected to our network, but only the Win 7 machine is located in our area. When you try to distance in the Win 7 machine form the XP with Remote Desktop 6.0, I get the error message 0 x 80090330. I checked with my network admin identifiers are correct and still does not connect.

  The XP machine is currently under service pack 2. Can we do anything without having to update the service pack?

  Hello DavidCortina,

  As the suggestions of CrDev and Tommy has not solved the problem, please join IT pro audience in the TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• Remote assistance from an XP machine on a Windows 7 computer does not work.

  Remote assistance from an XP machine on a Windows 7 computer does not work.  The connection expires whenever I try to connect.  Any suggestions?

  RA from Windows 7 to Windows XP is supported, but RA from Windows XP to Windows 7 is not supported unfortunately

• My 3rd Windows 7 computer is unable to access the computers on the network. "Unable to browse the network", or "the network is not present or not started.

  3 computers, 2 XP, 3 windows 7.  The network is wired and wireless Ethernet.  Wired windows 7 computer can see xp wireless desktop.  no computer can see 3rd xp professional running on the wired computer.  Third computer can acess internet through router wireless, but when accessing NETWORK/MICROSOFT WINDOWS NETWORK PLACES/SET, a message comes back with "Unable to browse the network", "the network is not present or not started.  I can ping other computers.  I ran home and small office set up several times.  The network is protected by Norton Inernet Security.  He can see all computers in the group in its Panel of network security plan.  This system worked to a point.
  I'd appreciate any help you can provide.

  original title: unable to browse the network.

  All computers must be on a working group to see and access on the same network otherswise, you won't have access to each other.

  Pls check your computers under workinggroup (domain name)

  Check if your firewall is not blocking.

• access denied to win xp computer teacher trying to access a shared folder on Windows 7 computer at home using a peer-to-peer network

  access denied to win xp computer teacher trying to access a shared folder on Windows 7 computer at home using a peer-to-peer network.  I enabled netbios over tcp/ip on computers

  Hello

  Try the steps listed in the link and check if this may help: "Access denied" error message when you try to open a file: http://support.microsoft.com/kb/810881

• I ran cmd on my computer and it says "windows resource protection found corrupt files but was unable to correct. He gave me a newspaper to look at, but access is denied. c:\windows\logs\CBS\CBS.log? /

  I ran cmd on my computer and it says "windows resource protection found corrupt files but was unable to correct. He gave me a newspaper to look at, but access is denied. c:\windows\logs\CBS\CBS.log? /

  Hello

  This should help you.

  You need to run as admin.

  "How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista"

  http://support.Microsoft.com/kb/928228

  And if the problems cannot be fixed, you may need to do a repair upgrade installation.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.