Access to resources on the inside and DMZ problem

Hi Techies,

I have a pix515 do remoteaccess VPN. People are able successfully to VPN in the box but are not able to access resources on the DMZ or the Interior. DMZ is directly connected to the PIX and inside is behind a CSS.

Could you people point me in the right direction please.

Thank you

Abdul, is solved your problem, have you tried suggested missing statements in your config... Let us know if any questions.

Concerning

Tags: Cisco Security

Similar Questions

  • I had several programs in Windows XP I can't access Windows 8, specifically the Solitaire and Free Cell games.

    I had several programs in Windows XP I can't access Windows 8, specifically the Solitaire and Free Cell games. I have uploaded them to Google Drive, but have compatibility problems. What can I do?

    Original title: program programs Application Applications compatibility

    He belongs here and serves no useful purpose. It is a peer to peer forum in which we come to get help with a problem or to help someone else with theirs, not to listen to some drivel by some small individual whose existence is made up of one complaint after another. Grow-up, things change, and no matter what you think that the old ways are not the best. If you have something useful to add to the end of things otherwise I will totally ignore you as I do everyone free service. anything not that you said above is anything but a mug shot and does nothing but show your ignorance.  Hope this helps and if you need any additional aid station and we will be happy to help you.

    The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

    "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

  • Customer Pix unit inside and dmz networks

    Are there problems that prohibit a client to the unit to start connections to hosts on pix dmz networks and pix inside at the same time?

    You can provide a link that describes the side PIX of the two networks not only inside network access configuration?

    Oops, yes sorry, brain fade from me, do not take into account my first email. Your configuration would look like this:

    IP address inside 10.1.1.1 255.255.255.0

    IP dmz 172.16.1.1 255.255.255.0

    IP local pool vpnpool 192.168.1.1 - 192.168.1.254

    NAT (inside) 0-list of access nonatinside

    NAT (dmz) 0-list of access nonatdmz

    permit the 10.1.1.0 ip access list nonatinside 255.255.255.0 192.168.1.0 255.255.255.0

    permit ip 172.16.1.0 access list nonatdmz 255.255.255.0 192.168.1.0 255.255.255.0

    Hope that helps.

  • Connection interface ASA inside and DMZ

    Hello

    I'm moving my current Internet/VPN link to a double link on different ASA and ISP providers.

    I want to create an INTERIOR on my ASA 5545 x interface that will connect directly to my Nexus 7 k Distribution or tanks

    The interface inside the ASA5520 is currently a virtual local network that was created on the Nexus 7 k.

    It seems simple enough to follow this same design, but using the different VLANs and the intellectual property regime.

    I also need to create an interface DMZ on the SAA on my distribution of Nexus 7 K device.

    Currently the ASA5520 DMZ interface comes from a VLAN that was created on the SAA and then to shared resources

    It seems simple enough to follow this same design, but using the different VLANs and the intellectual property regime.

    Is there a best practice approach document or advise that someone would pass along

    Models reference Cisco Secure Data center not dier DMZ. However, it is a very common configuration for the ASAs.

    Real wrinkles come in on the side of switch. You have the option to use physically separate switches (which you have already decided not to do), and a core of Nexus 7 k, the next option is to know how to separate the DMZ and the inside of the safe areas. The most secure, with a standard kernel k 7 would be to create a second VDC for the DMZ with no layer 3 services and have interface DMZ of the SAA to be the default gateway for hosts. A second option on the 7 k would be to stick with a VDC but put the DMZ VLAN charge either in their own VRF or simply once again make L2 only on the SAA with the ASA being the L3 bridge.

    There are several other approaches that you could take, but those that I have just described is the most commonly used.

  • Access a chart xy both inside and outside of a loop

    Every morning.  Semi-new LabVIEWer here (five weeks fun).

    This one has left me speechless.

    I take data from up to three units GPIB, generating three sets of data current-voltage, and I'm working on a xy real-time graph.  Data in a table to two dimensions (n rows and six columns), and I select a few areas combo to display on x and there axes (maybe I would like V1 vesus I3 or I2 versus I2, or whatever.

    That the ILO works very well.

    The problem is, that it 'live' update (which, surprisingly, works well and quickly), I need to include the graph and the code used to parse the data inside the while loop ('while' n sets of data are taken) and it means that once the loop is completed, I can not access the graph or the code.  The best I can do is use property nodes to change things like auto scale.

    Rather than post my code, which, after five weeks, looks like a sick human kidney vascular system, I would ask if you experienced people have a general strategy in this type of case.

    I'm sure 90%, which is also the fact that I am struggling to find a way of keeping and using the data table filled outside the loop, that such dumping in a table.  In this case, I want a table for it, but shouldn't there be a way of storage of the table?  I come from a background of textual programming rather than based on objects, in case you had not guessed!

    Thank you!

    AndyI wrote:

    As I say, I think it's just my misunderstanding of the philosophy of LabVIEW, and there must be a very simple procedure to achieve this.  I would like to know what it is.

    Yes, as soon as the REAL case is over, the case of FALSE runs that feeds a table empty indicator on the outside. Also use a registry to shift to the outside while loop and initialize it to the outside with a table empty. At the end of the iteration, feed the updated table to the terminal of shift register to the right.

  • Win 7 VPN client cannot access remote resources beyond the VPN server

    I have a Win 7 laptop with work and customer Win 7 VPN set up, and through it that I can access everything allowed resources on the remote network.

    I built a new computer, set up the Win 7 client with the exact same parameters everywhere, connected to the VPN with success, but can not access any of the resources on the remote network that I can on my laptop.

    Win 7 64 bit SP 1

    I did research online and suggestions have already had reason of my new set up.  In addition, I have a second computer that I've set up the VPN client, and I'm having the same problem.  VPN connects successfully, but is unable to access the resources.

    Tested with firewall off the coast.

    Troubleshooting Diagnostic reports: your computer seems to be configured correctly, distance resources detected, but not answered do not.

    I created another VPN client on the new computer to another remote network and everything works perfectly.

    Remember the old VPN connection to the remote network that does not work on the new computer works perfectly on Win 7 64 bit laptop computer.

    So, what do I find also different between identical configurations "should be" where we work and two new machines is not?

    It must be something stupid.

    Hello

    This question is more suited for a TechNet audience. I suggest you send the query to the Microsoft TechNet forum. See the link below to do so:
    https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

    Please let us know if you have more queries on Windows.

  • Trying to access local resources in the RDS, the resources of the user session only 1 shows

    I'm developing an application to be able to copy files to the local drive of the user to a RD.  I Remote Desktop of the user defined options to put their C: drives the RD session on two remote computers.  When I connect the server from a remote computer, I can see his drive C: in the left pane of Windows Explorer.  When I connect with each other, however, the C: drive of the computer is not indicated, and I can't access it.

    My application will have multiple simultaneous users, most of the time, and some of the programs need to return data to their respective local computers.  Is there something I'm missing, or there at - it another way to do this programmatically or by command line Copy?

    Hello

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Remote Desktop Services forum. You can follow the link to your question:

    http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads

  • I teach a cardio dance class on the inside and I can't give them a many exact calories when class ends.  The only choice is on the Apple Watch is the 'other' and I know that the class Burns 600 calories in an hour, but my watch shows only 250-350 burned. 

    I use my Apple Watch throughout the day and when I teach a cardio dance class, the number of calories is MUCH lower than other materials.  Why is the Watch not count my calories accurately?  The ladies like to know the calories to burn when the class is over and I can't give them using my Apple Watch.  Others in this class that wear the watch tells you how many is not too accurate.  We burn usually about 600 + calories and I'll be happy if my registers 350.  What could be wrong? Thank you!

    Hello

    Do not forget that Apple Watch uses Active calories (those who are burned by orders or travel) as the main measure for the app to training and activity app.

    Many other applications of fitness / devices report total calories, which consists of active calories + calories at rest (that your body is still burning even when you're not active).

    More information:

    Use the activity on your Apple Watch - Apple Support

  • The beeps from the BIOS and graphics problem

    1. when I start my computer (h9-1350), I get 6 short beeps, the computer is for a just half a minute, then continue to boot normally. I think it has something to do with a keyboard. I tried two different keyboards... KB USB provided with the computer and solar keyboard K750 from Logitech. He also sometimes appears an error message that I did not copy but the message said something about a keyboard.

    2. I can't get into BIOS to do the steps from HP FAQ Web site provides for the installation of a spare video card. As does the 6 beeps from the computer and then boots normally apparently it does not the button configuration screens to access the BIOS.

    The computer is a HP h9-1350 with Win8.

    H9-1350 HP / Intel i7 3770 / 12 GB
    Windows 8 / HP w2207 monitor / Radeon 6870
    Keurig ready for a coffee or Cup of hot tea

    Okay, I think that we have a fix/resolve. I found the LEGACY (just above), set it to Enable. I replaced the OEM video card with my Radeon 6870 and it booted right up less beeps. Thanks for the help.

    BTW, where can I find more information about this 'new' (for me at least) UEFI BIOS? I had no idea what Win8 make this change.

    Thanks again.

  • How can I solve the RDP and SQL problems after cloning of a paralytic?

    I got a job Server 2008 R2 system running SQL Server Enterprise 2012 all on an 8 G/4CPU VM and did a ' copy to ' VAPP Cloner.

    The new VAPP has been on one VLAN separated. During the copy process, customizing of comments was shortlisted, and I gave the new virtual machine, a new name for the machine. I can access both VLAN via my WIndows 7 x 64 desktop client OpenVPN.

    So far so good, I could use the vDC to log on the new machine of vApp using my previous administrator credentials.

    I found myself with two problems though...

    (1) none of my previous connections will work with SQL Server, when I try to launch SQL Server Management Studio. I get a message saying "Connection failed for user 'newmachine\user'" so maybe the MSN usr for duplicate users are not the same as the original sid user? I think that he could not tell the difference, if everything has been cloned and the machine name has changed.

    (2) my RDP 7 Windows client does not connect unless I have configure the new server to allow "a MOP" instead of just "Network Level Authentication" that has been configured on the original server that I cloned from. When I activate "all RDP" I can RDP into the cloned fine system.

    The cloned machine had the new name of the machine and a new SID assigned by the cloning process. The original and clone are on VLAN isolated and cannot see. Both not use areas and working groups.

    If I leave the cloned server THAT RDP "NLA" value only as the original server, my Windows 7 client gets a message complaining that RDP does not support the NLA for the cloned machine. RDP works fine connecting to the original server that still has not specified NLA. The RDP instance that says I need enabled NLA, watch NLA is activated in the about box.

    Someone at - he saw either of these issues? Any suggestions?

    Thanks, Dave

    Hi, my understanding is that sysprep does much more than simply by changing the SID of the box, it will also use the SID to regenerate the local MSN accounts system which is problably the origin of the problem, you're experiency. This is done for the security reasosns avoid guests who have accounts with the same sid on different machines. There is a tool called newsid that changes the SID of the server and let the system SID accounts because they were, but it has been known to have other issues but allow him to achieve what you want? I thiknk MS have retired it now, but you can always download on the net.

    If you need get SQL running sysprep and want to automate the process to set up your DB and users following post useful:

    http://msdn.Microsoft.com/en-us/library/ee210754.aspx

  • BlackBerry smartphones 'delete the message on the box to the letters and Pocket' problem

    I have 4 email accounts on my hotmail 2 BIS, 2 pop3.   After that I did a reset on my curve, only one of my accounts gives me the option to delete the message on the box to the letters and pocket.  Before the reset, all accounts has given me this opportunity.  I tried to return the service directories, re host routing tables, etc.   Any ideas?

    You need to go to your Inbox message, click options, and then send reconciliation and scroll through EACH e-mail under the heading message services and make sure that ' remove the "is set to prompt.  It must be defined for each email address.

  • Import Images from the PS and LR problem

    Hi all

    Since my last update App, I experienced some problems when you import images from LR into PS

    1. where, in LR, I select 2 or more images of 'open as layers in PS', I get a Pop Up telling me that I need the latest version of Camera Raw... It is up to date according to my account.

    2. once I finished with the photos in PS and save them in LR... the final image is ebb in different areas of the strip of film...  Sometimes it is the first image... sometimes, it's the last image...  I have the set to Capture time.  It slows down my work flow in organizing my photos.   I photograph the real estate and the placement of the final images is crucial.

    All the tips are greatly appreciated.

    Thank you...

    Brian

    This bug has been recognized by Adobe.  Please add your vote me too, and the details of your problem to this bug in the Adobe official feedback forum report: Lightroom: sort by Capture time. Community customer Photoshop family . He will make more Adobe likely to give priority to a solution and inform you immediately when the bug status.

  • Warranty on the desktop and monitor problem

    Hi, I just bought "Dell Vostro3900 Mini Tower (more later than 2013)" with "Dell E2015Hv Monitor" separately yesterday (March 22, 2015). "." They said "both" have the 3 year warranty that will begin on the date of purchase and can be check by using "Service tag" on the dell Web site.

    After I checked, it seems like my office guaranteed is already started on 'December 11, 2014' and there is no "Service tag" for the monitor.

    How should I proceed?

    Thank you.

    Rarehunter

    Service tag numbers are only on the 27 "and especially the monitors.

    If you need service, your order number is the identification number.

    Use the monitor order number and contact Dell Customer Service.

    Bev.

  • The option Call Logging Smartphones blackBerry - cannot access as indicated on the phone and manual - HELP help!

    I am trying to remove my calls to appear in the list of messages.  Everything I read - manual and help on phone said to press the Menu button, click Options, and click call logs - I don't have an option for call Logging on my list of Options.  Is there another way to access to this?  And why would I not one if the manual indicated that it should be there?

    In your device, press the green button to access the call log, press menu, option to call Logging and change on ANY

  • How to access a file via the Applet and JavaScript

    I want to copy a file on the client computer from one place to another place for a Java Bean.
    To do this, I created an applet and a Java Bean as follows:
    import java.applet.*;
    public class FileUtils extends Applet {
        public void copyFile(String src, String dest)  {
              //
        }
        private String source, destination; // setters/getters are there of course
        public void copyFile(ActionEvent actionEvent) { // Bean
            FacesContext fctx = FacesContext.getCurrentInstance();
            ExtendedRenderKitService erks = Service.getRenderKitService(fctx, ExtendedRenderKitService.class);
            String command = "var s = '"+ source +"'; var d ='" + destination +"'; " +  " document.fileUtilsApplet.copyFile(s, d); ";
            erks.addScript(fctx, command);
        }
    Then I added the APPLET tag that references the class above in the page fragment:
                    <f:verbatim>
                        <applet code="FileUtils.class" name="fileUtilsApplet" height="30"
                                archive="/context-root/Applet.jar"
                                width="200">
                        </applet> 
                    </f:verbatim>
    The Java Console, I see that the jar is downloaded successfully, but when executing code in the bean, the JavaScript code seems not to do anything, as if the public "copyFile" method has not been called at all and no output in the Console Java as well.

    Note that I already follow the guidelines at http://www.oracle.com/technetwork/developer-tools/adf/learnmore/71-adf-to-applet-communication-307672.pdf.

    You have any ideas?

    Well, as I said before, you must explicitly grant access to the file system to the applet. See http://docs.oracle.com/javase/tutorial/deployment/applet/security.html for more information and http://www.ccp4.ac.uk/jwc/image_applet/Policy_file_examps_ccp4.html for how to do this.

    Timo

Maybe you are looking for