Access to the content of the virtual drive

Similar Questions

• How can I access the log files of the application of a ThinApp on the virtual drive?

  I thinstalled an application using the v4.6 and I am able to launch and run the captured application.

  But the application creates log files to:

  c:\Program files\ensembleProAgent\LOGS\

  So I can access them on of ThinApp virtual drive?

  If so, any help is appreciated, I don't know where is the virtual drive or how I can access / read it.

  Thank you

  Joel

  Hello

  A virtual drive in the world of ThinApp means a disk that you have virtualized so he will be present for the virtualized application. If you mean by the word virtual drive where we keep the changes not applied to the physical environment are you talking about what we call the sandbox. Default location would be users with roaming profiles in a folder called Thinstall (ThinApp used to be called Thinstall until VMware has acquired the product)... Method of pomp for the sandbox would be to hit start - run on your client and enter %APPDATA%\microsoft\windows\sendto and click OK...

• When it transfers data to the microcomputer by Uart, USB etc PC, it must either be aware access to the hard drive of the PC or not?

  I want to know when it transfers data to the microcomputer by Uart PC, USB etc., it must either be aware access to the hard drive of the PC or not.
  When the Windows operating system run my programs, hard drive is accessible when there is a space of memory?
  For example, virtual memory method return page-by-page, page-out using the drive hard when memory is used in full.
  I am using Windows 7 Home Premium 64-bit. The access to my PC hard drive light flashes even though I don't run my program.

  The lamp for the drive starts flashing as the computer is running and programs are running. Windows is a program that runs all the time and access the hard disk.

• Where Win7 stores the Windows Virtual PC > XP Mode > XPMUser "My Documents" to access if the virtual XP becomes inaccessible?

  Lost all files in XP mode is "My Docs" XPMUser because I can't connect? Same situation. Where Win7 stores the Windows Virtual PC > XP Mode > XPMUser "My Documents" to access if the virtual XP instance become inaccessible? Like many here, I have activated integration and where then asked for a password on the next reboot of the XP Mode. The password that I usually use has not been accepted. I tried all the possible solutions (have "integration" disabled, start with virtual XP safe mode), but not able to change my password XPmode so don't chance NO connection.  I have brand new instance of XP Mode works, but obviously does not have access to the CASE of XP Mode instance. My question is simple: where are the files that I created and saved in the default location of the first modes XP XPMUser "My Documents" in Windows 7? I tried Win7 for XP 'My documents' files by names or names of game but no luck.  Help, please.

  It is located in the file XP Mode VHD (Virtual Hard Drive), you can look as pretty as a ZIP file that contains a structure of entire disk rather than just a few files.  This VHD file is usually stored in your user folder in a folder of Virtual Machines, for example mine was in the C:\Users\SKeene\Virtual Machines.

  And it's my cheesy guilty pleasure wishes to inform you that you can browse this file as if it were a hard drive, without having to start the XP mode.  However, security applies: If your 'My documents' has been limited, it might be difficult to access (even if you pouvez be able to take possession of the file and gain access).
  Here's how:
  1. Open the Start Menu, right-click on computer and select manage. In the maintenance window of the computer that opens, choose "disk management".
  2. On the right side, click "More action" and then click "Attach VHD" and select your XP Mode VHD file.  You might consider making a backup of the file copy of the hard drive virtual before do you it, just in case!
  3. Once you have connected the virtual hard drive, an Autorun dialog box may appear.  If this is not the case, simply click on Start/computer to see your new 'Local disk '.

  At least, I can confirm that it worked perfectly for me, and I had access to my account "User XPMode" alongwith without problem.

• Tecra M11 has a trap door for access to the hard drive?

  Can someone tell me if the Tecra M11 is equipped with a door to provide access to the hard drive?

  Previous Tecras have such a door, but I can't say for some photos of the site Web or the M11 manual if this still applies. I need to know before ordering.

  Thanks in advance for any help.

  Hello

  I put t know what you mean exactly. hatch giving access to the disk hard but the notebooks THAT HDD is placed at the bottom of the unit.
  You can easily remove the cover that secures the HARD drive Bay to get access to the internal HARD drive

  Welcome them

• I have a problem with access to the C drive.

  Original title: lost access to the C: drive...

  When I was a noob after installing a new HARD drive, I have written an autorun.inf file to my C: drive to make it look cool (you know, give it a cool name, and change the icon). I was not allowed to save .inf in the root files, so I decided to open the properties and tinkering with security... when I turned on my computer later, I now do not have access to the c drive, and cannot do anything administrative (including rear safety switching)

  Please, please help!

  Hello

  Method 1:

  You can enable integrated admin and restore the system.

  Step 1:

  To activate the built-in Administrator account, follow these steps:

  a.Click theStart button, then type cmd in the Search box.
  In the list of research results, right click on cmdand then click run as administrator.

  b.At the command prompt, typenet user administrator / Active: Yesand then press ENTER.

  net user administrator , c.Type and then press ENTER.
  Note: Please replace the tag with passwords which you want to set for the administrator account.

  Type exitand press ENTER. Disconnect from the current user account.

  Step 2:

  System restore

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Method 2:

  If the problem persists, perform a repair installation (upgrade on the spot).

  Check out the following link to do the same thing:
  http://support.Microsoft.com/kb/2255099

  Note:
  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  Reference:

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  It will be useful.

• Problem with VMWare Tools and the virtual drive

  Hello

  I installed the test version of "Workstation" and installed a windows 7 x 86 non-virtual DVD drive mapped, which is mounted on D:\.

  Subsequently, I installed all Windowsupdates and after that I tried to install the VMWare Tools.

  But every time I get the message that I should look on the 'virtual' drive on D:\.

  But there is no virtual drive, it is my DVD of the hostsystem.

  Is there a way to mount a virtual drive with tools or install them in another way?

  Thanks in advance

  Taldrit

  Hello

  You can directly install the VMware tool configuration by copying the setting in the machine and manually install the same.

  Try VMware on another machine tool in which you will get the installation... Copies on disk and then move it to your new VM and do a manual configuration.

• Need access to the Q: drive that contains the Microsoft Starter 2010 for EXCEL, Word files, etc.

  Cannot access the Q: drive which has the 2010files MS Starter for EXCEL, Word, etc. Attempted to change the property. Access denied. Signed as an administrator and the only user of the computer.

  Anyone?

  You can not, as says Gordon is a virtual drive, the end user does not have access to it.

  And no sound does not contain the files Office Starter

  Try here http://office.microsoft.com/en-us/starter-help/update-repair-or-uninstall-office-click-to-run-products-HA010382089.aspx

• No access to the DVD drive - 38 error code

  Update Driver published 07/07/08 to 23:59 has been installed on my system as made by Toshiba Tempo but rebooting my machine, I get error 38 (according to Vista) that prevents the new driver installation as the old pilot is resident in memory... ?? Effectively, this means that I can't access or see my DVD player more in other ways than in the page Manager devices Control Panel. Option driver restore is not available, perhaps because it was an update of the firmware. The message on the device properties page is as follows:

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  The installed updatre was frmwre-20080707134447. It includes an Adobe document that tells you what to do and how to ensure that your drive needs to be refreshed, which was easy to follow and loose my machine.

  I tried to uninstall the device and the driver, but whenever I have to reload the same error occurs.

  I'm really impressed and quite embarrassed, because it is a recommended Toshiba firmware update done using their system of Tempo, ideas or advice welcome.

  Thank you

  Matt

  Hello

  Do you see a CD/DVD drive in Device Manager?
  If so, then remove it from the list of devices.

  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally restart the laptop and check if the CD/DVD drive would still be functions

  Further details can be found here:
  http://support.Microsoft.com/kb/270008/en-us

• Satellite L750 - access to the HARD drive recovery partition

  I need to reset the drive to factory settings, but can not access the recovery starts. I read the manuals

  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm
  http://APS2.toshiba-tro.de/KB0/HTD16036F0000R01.htm

  This information do not work for me. This utility, I did not at all.

  My serial number 7b421068w L750

  I tried to run the recovery partition, I disable for laptop and lit keyboard '0' key and tried other keys F1 - F12, but system just beep with a blank black screen and then Toshiba displays menu and the Windows loading as usual.

  He has a record of factory "HDDRecovery" on the logical drive D: with all default recovery files

  Post edited by: clients

  Missing a very important information: preinstalled OS the original that you have with your laptop or you have installed a clean version of Windows?

  When you buy the new book it comes with factory settings. If long your laptop has this plant, you will be able to install the recovery image according to instructions with F8 at startup. If you change something that it will no longer work (install own os, partition structure).

  In this case you must use the created recovery disc but I assume you didn't create one although it is clearly described in the document s user manuals.

  Problem is that you can't do much. Either it works or not. If there is no way to install image recovery I'm afraid you need to order the new Mr. recovery disk you can do it on https://backupmedia.toshiba.eu/landing.aspx

• Problem with the virtual drive.

  On my g6 Pavilion, I get the full message e: HP_TOOLS road.   It is a virtual drive on my pc, how do I deploy using DISKPART to BACK?

  Thank you

  Tom

  Did you make the registry change that I sent you a private message?

  So, I agree with your statement. These are certainly back up files. The question is; What is backup files?

  Microsoft System Restore only deals with backup of critical system files and registration and records in a hidden folder that is not easily editable. In addition, you verified that this is not enabled for this player. So who is excluded.

  Another possibility is that other Windows, such as Windows Backup service, creates these files. Backup Windows treats the user's choice of the files instead of just the files of backup system.

  Try the following steps.

  1. Click Start, type "backup and restore" and press ENTER.
  2. This will bring up the Windows backup window. It seems to be set up, or it asks you to configure for the first time?
  3. If it is flagged by the look on the left side and you should see an option "disable automatic schedule;" turn this option off. The backup will be not automatically, but you can always do it manually on this screen.
  4. Delete the file Moberdan_HP from the HP_Tools partition.
  5. Improperly editing the registry if you used it.
  6. Reboot the laptop and make sure that the problem is resolved.

• Access to the hard drive of a PC to another one from the internet (or anywhere)?

  Dear Sir/Madam,

  I have computers of towing and both have internet. How can I access hard disk of a PC of one of the internet (or anywhere)? I have connected and can access the PC with the software "Remote Desktop connection" and "TeamViewer". But I want to access the hard drive or explore one of my program by typing just the necessary contact in the internet address bar or simply click on the specific path or defined link.

  With respect,
  Marie payen

  Hello

  Both computers have Windows XP installed?

  Follow the below mentioned article:

  Overview of the Network Setup Wizard
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_wizard_overvieww.mspx?mfr=true

  Alternatively, you can follow the below mentioned article:

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Follow the items listed below:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/524.mspx?mfr=true

  http://support.Microsoft.com/kb/308887

  http://support.Microsoft.com/kb/304040

• Windows XP start error after access to the hard drive from another computer

  Computer laptop Windows XP went bad because of a bad graphics card.  Bought a new computer at the same time with Windows 7.  Pull the hard drive of the laptop to get the files back.  Had to change the permissions to grant access.  Now when I try to start the windows XP laptop, I get a "windows cannot load the user's profile but you has logged on with the default profile" and then a "windows Explorer has encountered a problem" appears and I can't do anything with it.  When I select 'close' the screen goes gray, then the same message appears.  I have to use the Task Manager to restart.  I did a repair of my XP install disc and also a system restore and still the same problem.  Help!

  Also, running service pack 3 before the repair.  Now on service pack 2 that I cannot access windows update to get updates.

  Computer laptop Windows XP went bad because of a bad graphics card.  Bought a new computer at the same time with Windows 7.  Pull the hard drive of the laptop to get the files back.  Had to change the permissions to grant access.  Now when I try to start the windows XP laptop, I get a "windows cannot load the user's profile but you has logged on with the default profile" and then a "windows Explorer has encountered a problem" appears and I can't do anything with it.  When I select 'close' the screen goes gray, then the same message appears.  I have to use the Task Manager to restart.  I did a repair of my XP install disc and also a system restore and still the same problem.  Help!

  Also, running service pack 3 before the repair.  Now on service pack 2 that I cannot access windows update to get updates.

  You have another administrative user you can connect to the system with and change the owner and permissions on the folder Documents and Settings of the other user with?

• Access to the hard drive USB network - WAG310G

  Hello.. I have a 500 GB USB hard drive attached to my WAG310G, but it can be accessed from the network. IM using XP Pro.

  Someone suggested to go to start / run and typing \\192.168.1.1\, but I just get an error "the network not found path.

  This seems to be a really hard to find an answer, because I can't find any help on the internet either.

  Help, please!

  See / Kevbb.

  I think that you do not have the possibility to access the drive on the network, but you can use the interface of the router to store your entire network on the USB connected to your router.

  If you have DDNS service, you can manage the storage device using the WAN IP address. To enable WAN HTTP access, you must enable remote access on the Administration > management screen and disable the firewall on the security > firewall screen.

• How can I block access to the hard drive to windows when the computer is blocked?

  When I leave the computer on and 'blocked' option it accesses the hard drive and "work like crazy. Simple I want to block all the software to access the disk hard until I connect again.

  I want the computer to be available on the network, but does not.

  Thank you

  Sorry, but that is simply not possible.  Each computer doing something, if you're connected or not, each tick every millisecond it's on.  If you could freeze the process somehow, you would also freeze the processes and services that would allow you to access the network. Better, we advise to leave it alone, lock to prevent others from accessing and then do what you need to on the network.