Access to the eccentric camera and GPS problem

I love this phone and use it for a few weeks now. I know that the update just worked for T-mobile, and the biggest problem he treats is the camera. My question is if anyone knows if this update fixes other issues?

One of them is how he takes the X bike to pin point its location. I know that most of the Android phones are simply not very fast when it comes to this, but this phone takes more time than many other phones I've used (most recently a HTC One).

Another problem is, like many of us, I take lots of photos, and access to the camera can be tricky. I like to review my photos before I quit the application. Later if I want to go in the camera app, it brings me to the last image I tested, instead of the camera. Very well, but when I swipe to the left to reach the camera, he leaves the app. Also the camera icon on the bar above the image is missing, so I can't easily access the camera.

Is the application gallary your default program for image manipulation? This happened to me when I made the default handler quickpic.

Tags: Motorola Phones

Similar Questions

  • I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates?

    I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates? Help please.

    There are two main reasons for the mistakes of certificate:

    1. Your computer's time is not set correctly.  Check your time year/month/day/hour/minute/timezone/light of day.  Right-click on the clock in your taskbar and select "set Date/time" and make sure you are ready approximately 5 minutes of real time (don't forget time zone and DST).
    2. The second reason is that Windows XP is not very good for updating root certificates.  Go to the following site:
         <>http://support.Microsoft.com/kb/931125 >
      and go down to the section:
      'Update Package root (designed for Windows XP only)'
      There is a link, you can use to download a update for your root certificates package.  Download this package and double-click it to update.

    HTH,

    JW

  • 2558 HP HC MONITOR DRIVERS for THE WEB CAM AND MIC AND the OTHER BUILD IN DEVICES CE WHO IS BUILT IN MS7 IS BAD, AND IT SHOWS the errors of devices

    It takes the right drivers for hp w2558hc monitor, is the web cam and microphone and other devices. Now what a windows MS7 is incorrect and when the pc doc runs it says it devive pilot problesm we tried to remove the drivers, that it doesn't always, the only way to solve this is unplu cable webcam, while the device driver goes.  It was working OK in vista and when hp gave me free ms7 upgrade, when the errors started. I still have the thing he had trouble even on vista because of the blue projection. MICROSOFT and HP has to happen to get together and put the correct drivers MS7 or update the old was the last time, she was last updated 2006.  They sstesm now I have is a 64-bit MS7, we tried everything. It works but it does not just because of the problem of driver and the only way to remedy to the webcam cable monitor unplu when not in service.  It gives you 3 errors and it organizations all the internal features of this monitor as a web cam, mic. any suggestions out there?

    CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/33d7bcee-b0ed-489b-a15d-c087c421cb55 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • How to unlock the c: drive. I have only access to the folder users and subfolders.

    I have only access to the folder users and subfolders.  Everything I tried was "access denied."  I can't get to the root of c:.

    Hi, Scrivmark

    The default C: drive system is not intended to access directly by users and therefore users have restricted access to its root in the premeditated or premeditated damage prevention vital system files. If you are an administrator you can allow full access to your account to all or specific files on drive c (including a root folder) by editing its ' authorization of the lists by right-clicking on a file and choosing "Security."
    If you are not an administrator, you should ask another user whose account is Administrator (or equivalent) privileges to access the interesting files to your account.
    In both cases, you must understand damage system files, you can do.

    This suggestion is the intention that your computer is virus-free.

  • I bought the Leica camera and supposed to get Lightroom for free.

    I bought the Leica camera and supposed to get Lightroom for free. I have managed to download creative cloud but impossible to download Lightroom on my Mac desktop. Homepage keep asking for a monthly fee. Please guide me how can I start using Lightroom.

    If it's a Leica offering, you need Leica

    Do you have a card with a happened number of redemption with your camera?

    Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

    - and https://forums.adobe.com/thread/1572504

  • Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...  I tried to work offline at home after working online for a while. The sign came and said ' no Internet connection /- and the options we

    Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...

    I tried to work offline at home after working online for a while. The sign came and wrote

    «No Internet connection / - and the options have been - try again or continue offline "and I could not work no prob. by choosing «continue in offline mode»

    However, I've used photoshop for a few hours yesterday and I brought my laptop home from my photographer friend to share the work of editing... and I couldn't open Photoshop.

    "The network is not connected TRYagain.

    It was the only option, does not allow me to continue offline...

    You have an idea why I couldn't?

    An Internet connection is required the first time you install and your creative Cloud of license applications.

    You can use the applications in offline mode, but must be online from time to time to validate your software licenses. Please see this link for more details: CC help | Creative cloud / Common Questions

  • Bring item full screen after use of the 3D camera and changing point position/orientation

    Hello.  I am a new user of After Effects.

    After you apply the 3D camera and make adjustments and also make adjustments to a position of individual items and the orientation in 3D space.

    is there a way to get one full screen (and directly to the camera) once again, other than doing 'eye '?  Is there a feature or mathematics that will get the item mode full screen

    as if you do not apply 3D or or changes of position?

    Said another way, if I have several parts of the video on screen, turned them all 3D, changed that position and orientation, then applied a 3D camera and adjusted that

    so no items are full-screen one, then you want one of them to return to full screen mode, can add you values of parameters of the element and the camera may be a value

    which translates into a single element to a full screen/straight on angle (as if the 2D and not affected)?

    Thanks in advance for any direction.

    Hey brvid

    The easiest way is to:

    -Start with your image full screen

    -Click on the box for this layer 3D

    -Add a camera (which uses the current view for its zoom/position)

    -Add a null value, click on the 3D box so that the null value

    -parent the camera as NULL. That the null value has the same ISP values as image

    Now, you can duplicate this image and place around the scene in any position and rotation.

    - Then you can copy values ESP of other images as the key your null and the camera images will move to this image and it will be full screen

    Hope this helps,

    Steve

  • Printer Photosmart 5520 problem:, I have access to the secure page and cannot open a session

    My printer does not print in black. I followed all the instructions to fix it. I can't go down loard that assistance because it is a Vista. I get to the secure page and he asked my name and my password. I am the administrator, but it does not accept my names or passwords and blocking me. What name and password it seeks?

    Hi @arts4pat,

    Welcome to the Forums of HP Support!

    I see that you get a secure page and that you are unable to print black on your HP Photosmart 5520 e-all-in-one printer. I'd be happy to help you with this.

    I like that you get the login screen for the Built-in Web server for the printer. Is this correct? This seems to indicate that someone has put a username and password on the printer, for security reasons. If you don't know what are the connection information, the only way to remove this is to do a factory reset on the device. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

    That being said, I would like to start here. Please, try the steps in this guide, the printer prints blank Page or fact not printing black or color ink for HP Photosmart 5520 and Deskjet Ink Advantage 5520 series e-all-in-one printer.

    NOTE: This problem may be caused by problems with the ink cartridge print head or with the printer ink system.

    If you have completed all the above steps and your product still has a problem, the printer service.

    Contact HP for service in all countries except Asia-Pacific.
    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.

    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to choose your
    contact options»
    Step 4. Scroll down and click on: contact HP options - click Get phone
    number
    File number and phone number are displayed.

    I hope this helps. Good luck!

  • On Facebook, the cat came and fixed to the front on the keyboard and now FB is SUPER TINY, help

    I don't know how it happened. My stupid cat came and laid down in front of me, on the keyboard, back bent and suddenly, the web page is teeny tiny. I can't read yet.

    See also:

    Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)

  • Yoga 10 wifi and GPS problem

    Hello community,

    I plug a few days ago a YOGA-10 Tablet (data system below).

    I am facing two problems:

    (a) my wireless is very poor. I am often out of wifi coverage and everyone around, with other devices work fine.

    (b) I need the Yoga-10 to test GPS based applications.

    However the GPS is too often lacking.

    I also use MobiWIA GPS status & Toolbox app and trip a 50 kms with my Yoga in the front seat, I get 0 fixed satellites (although only visible 10-11) on 80% of the time (other devices get 100% coverage).

    Any suggestion?

    BTW, as far as I understand, Yoga-1 does not support satellite Glonass, right?

    Thanks in advance

    Has taken my tablet from Lenovo service that they replace the display (?) and it worked!

    Now, I have good signal GPS and WI - FI

    Thank you!

  • installation of updates from windows to windows 7 after 10/25/10 makes me lose all access to the internet (wireless and others)

    I have r530i samsung that is less than 8 weeks, after that 1 week, a new set of windows udates appeared which caused my Internet to lose. I spoke to my internet provider, between us, we confirmed there was nothing wrong with the connection or otherwise (I was able to access the internet from another PC using the same provider and user name) it was suggesteed downloads had done something for my wirless modem.

    I did a complete system restore and it worked just fine.

    a few weeks later, the same problem occurred after some updates of windows. Unfortunately the fault can be diagnosed because I can't access the internet? I did a full recharge of the system of 23/10/10, this has worked fine, windows then downloaded updates and my internet access has failed once again so I have disabled the automatic updates and everything seems fine.

    all connections work well, I can still see the home hub it won't let me access the help please

    Hello

    There are various reasons for internet connection doesn't work after installing the update of windows on the computer.

    First of all, I would say that you check the update is causing the problem.

    To see the updates are installed on your computer

     

    (a) open the updates installed by clicking the Start button, click Control Panel, clicking programs, and then r undeprograms and features, click view installed updates.

    Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually after placing the computer in a clean boot state.

    http://www.Microsoft.com/downloads/en/default.aspx

    To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Envy 17-j130ea: HP Envy 17-j130ea do not have access to the BIOS recovery and black screen

    Hi people,

    The laptop was waking up alone, so I decided to try to update the BIOS. Bis error. The tool has been run on 64 Win10

    The HP tool left me with a black screen and after that I tried to hold the low win + B and the power to access the Bios recovery, but there is no nothing. Tone flashing, nothing.

    I don't know if creating a flash drive with the bios will help as I don't have admin rights in another machine to create the flash drive using HP tool.

    Any ideas? Flash player won't work if BIOS recovery is not pulled up?

    All ideas are welcome.

    See you soon

    Well, I managed to solve the problem overnight without having to wait three days for anyone to answer that after the end of the week, with the following steps:

    1. I had to create a USB key with the bios by using the executable auto HP. It did not help that for some reason any that you have to have the administrator rights on a windows machine. Why aren't files available as well in a simple zip file? It would have helped a lot! Please stop HP right now provide only Autorun... it only compliates things. It took me an extra day just because I couldn't access a machine windows with administrator rights to install the executable file.

    2 - Insert the memory stick with the bios in the dead computer.

    3 - Press the Win + B and press the power button. The machine didn't do any beep or noise that all the guides say. I just kept pressing the key B + Win until I saw a recovery of the Bios screen, finally. Without the memory following stick this same step has not shown, nor does the computer make a noise or show any display, just died.

    4 - wait for the update at the end.

    My Advisor. Do not update windows, it all messed up. It is very reliable to get the memory stick. Too many windows things can interfere in the process, just don't do it from Windows, or at least create the memory stick first while you still can.

  • [MOVED] Update McAfee blocks access to the AOL software and software window Internet Explorer

    UPDATED July 2,2012
    Update antivirus software McAfee (McAfee software provided when I bought this Dell computer)
    It's so I can't connect to Internet after reboot
    with cable broadband from AOL or Windows Internet Explorer software on
    Windows 7. Programs are not blocked the McAfee software programs
    complete access... It seems that just programs cannot "find" the modem broadband
    in Windows 7 professional OS after your update... The other weird thing is
    The accuweather by Dell can access the Internet and produce of the time, date and
    weather on my monitor. I disabled the wireless connection that
    is integrated into the motherboard of Dell. I also tried to reinstall the modem
    (AT & T - Motorola 2210 Modem) software from the original CD but I get the message there is no 64
    driver bits. I had to use a restore five times point to eliminate the five
    try to update your software... What makes the limited Mcafee anti-virus software
    utility, since it can be is more updated. Virtual Technician of McAfee said that he is
    nothing wrong. Of course when the McAfee service is updated I can't chat on the
    NET with McAfee technicians ' sr since I can't access the Internet.
    McAfee technicians have no idea what is the problem.
     
    Windows says I have the latest driver upfdste for the Broadcom Gigbtye Ehternet, who manages the modem.
     
     

    I worked hard on this for so long and McAfee still blocking access to the Internet if I update definitions so to restart so I removed a second time. I installed the program software Antivirus malware from Windows and the Windows Firewall, which turns on automatically when you remove McAfee.  Intel took a horrible investment decision buy McAfee.

  • Restrict access to the IP address and the Application

    Hello

    I have a problem with the application of database access. I want to limit the users using Toad. I want users to use only their application, not of Toad. But as a s/n, I still need Toad. I do like this limitation?

    CMIIW.

    Thank you and best regards,

    Wiwin, ST, OCP.

    Wiwin,

    If you want to try to make decisions about access based on the application used to establish the connection, you can look into some of the attributes sys_context and see if there is something that could work.  However, there is no guarantee that a given attribute is populated and precise.  And, as Andy, it would be possible for a user to usurp a request for his client if he can change the name of the executable file, or even to change the attributes with the DBMS_APPLICATION_INFO package or OIC.

    Here's a query that can help you research how a tool or a given application is filling these attributes.  First connection with the tool you want to analyze, for example, TOAD.  Then, run this query.  It covers two sys_context attributes that I will be dedicated to implement an application 'fingerprint': MODULE and CLIENT_INFO.  If this does not work, you can try substituting one or several other attributes listed under the function description SYS_CONTEXT in the SQL reference manual .

    Select

    "CLIENT_INFO: ' | '. "sys_context (' USERENV', 'CLIENT_INFO' ') |

    MODULE: '. sys_context (' USERENV', 'MODULE' ') "SYS_CONTEXT Data".

    Double;

    If you find a 'fingerprint' that you think that you can use, you can try that integrate your logon trigger.  However, I would exercise extreme caution due to aforementioned unreliability of these attributes.  Do a lot of testing!  Or better yet, try the recommendation of Andrew; It cannot take more time to use the application role he suggests that it would for enough to code and test a change of logon trigger, and it makes a better job of dealing with the risks.

  • Function of memory in the loop control and Simulation - problem of the ODE Solver

    Hello

    I'm correctly using the control loop & simulation to simulate the behavior of what is essentially a shock absorber-spring-mass system. In the process of change in time (dt) is used to integrate an arbitrary value. I use a rack depending on memory to store the time, to calculate the change of time (dt).

    The simulation is quite complex, because of the precision required, not all the ODE solvers can all support. Currently I use the Adams-Moulton method, this works very well for the simulation. However, it cannot detect the change in time, the change is constantly zero. This problem has auto market by using an another ODE Solver, but then the simulation has been messed up instead (even when I listen to the step sizes and tolerances). So I'm pretty confident that Adams-Moulton is one of solver ODE best suited to the problem at hand.

    Is there another way to store the previous hour and use it calculate lag, that the use of the memory function? Everyone knows about these problems before?

    I did a lot of research of error using the probe, but I'm sure that there is a problem with the ODE Solver and memory function. See the image below, showing basic how is calculated the change in time.

    I'm pretty new to LabVIEW, so if there is something else I missed I would be happy to hear it.

    PS! I set the tolerance minimum step of size/relative and absolute for the Adams-Moulton to simulate the behavior of the system properly.

    Problem solved!

    It turns out that the ODE Solver has struggled because of two "table 2D find" used functions. This was created for the interpolation/extrapolation, which caused a problem constantly and the ODE Solver could not resolve correctly, so the functions of memory doesn't work does not correctly or the other.

    By increasing the table manually, I could use closest method instead, with also good results as interpolation.

Maybe you are looking for