Access to the hard drive USB network - WAG310G

Similar Questions

• When it transfers data to the microcomputer by Uart, USB etc PC, it must either be aware access to the hard drive of the PC or not?

  I want to know when it transfers data to the microcomputer by Uart PC, USB etc., it must either be aware access to the hard drive of the PC or not.
  When the Windows operating system run my programs, hard drive is accessible when there is a space of memory?
  For example, virtual memory method return page-by-page, page-out using the drive hard when memory is used in full.
  I am using Windows 7 Home Premium 64-bit. The access to my PC hard drive light flashes even though I don't run my program.

  The lamp for the drive starts flashing as the computer is running and programs are running. Windows is a program that runs all the time and access the hard disk.

• Tecra M11 has a trap door for access to the hard drive?

  Can someone tell me if the Tecra M11 is equipped with a door to provide access to the hard drive?

  Previous Tecras have such a door, but I can't say for some photos of the site Web or the M11 manual if this still applies. I need to know before ordering.

  Thanks in advance for any help.

  Hello

  I put t know what you mean exactly. hatch giving access to the disk hard but the notebooks THAT HDD is placed at the bottom of the unit.
  You can easily remove the cover that secures the HARD drive Bay to get access to the internal HARD drive

  Welcome them

• How to access the hard drive USB on E3000? Am I missing something?

  I have my router configuration fine to the internet, as well as the media server.  I can't understand how to access the hard drive of my laptop, however.  The manual says to put 192.168.1.1 in the field the address of windows Explorer, but it gives me just the 'Setup' page for the router.

  Am I missing something simple?  I use Windows XP.

  Click on start - go to start > Run/start search and type "\\192.168.1.1" (without the quotes) and press on enter and it should ask the user name and password, the user name and password, use "admin" all lower case, and then click Ok... Now you should be able to see your USB... You must make a right click on it and select "Map network drive" and check the Enable box and below click Finish... It will map the USB on your computer... Once done, you will be able to send and receive data from your computer to the USB...

• Access to the hard drive of a PC to another one from the internet (or anywhere)?

  Dear Sir/Madam,

  I have computers of towing and both have internet. How can I access hard disk of a PC of one of the internet (or anywhere)? I have connected and can access the PC with the software "Remote Desktop connection" and "TeamViewer". But I want to access the hard drive or explore one of my program by typing just the necessary contact in the internet address bar or simply click on the specific path or defined link.

  With respect,
  Marie payen

  Hello

  Both computers have Windows XP installed?

  Follow the below mentioned article:

  Overview of the Network Setup Wizard
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_wizard_overvieww.mspx?mfr=true

  Alternatively, you can follow the below mentioned article:

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Follow the items listed below:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/524.mspx?mfr=true

  http://support.Microsoft.com/kb/308887

  http://support.Microsoft.com/kb/304040

• How can I block access to the hard drive to windows when the computer is blocked?

  When I leave the computer on and 'blocked' option it accesses the hard drive and "work like crazy. Simple I want to block all the software to access the disk hard until I connect again.

  I want the computer to be available on the network, but does not.

  Thank you

  Sorry, but that is simply not possible.  Each computer doing something, if you're connected or not, each tick every millisecond it's on.  If you could freeze the process somehow, you would also freeze the processes and services that would allow you to access the network. Better, we advise to leave it alone, lock to prevent others from accessing and then do what you need to on the network.

• Windows XP start error after access to the hard drive from another computer

  Computer laptop Windows XP went bad because of a bad graphics card.  Bought a new computer at the same time with Windows 7.  Pull the hard drive of the laptop to get the files back.  Had to change the permissions to grant access.  Now when I try to start the windows XP laptop, I get a "windows cannot load the user's profile but you has logged on with the default profile" and then a "windows Explorer has encountered a problem" appears and I can't do anything with it.  When I select 'close' the screen goes gray, then the same message appears.  I have to use the Task Manager to restart.  I did a repair of my XP install disc and also a system restore and still the same problem.  Help!

  Also, running service pack 3 before the repair.  Now on service pack 2 that I cannot access windows update to get updates.

  Computer laptop Windows XP went bad because of a bad graphics card.  Bought a new computer at the same time with Windows 7.  Pull the hard drive of the laptop to get the files back.  Had to change the permissions to grant access.  Now when I try to start the windows XP laptop, I get a "windows cannot load the user's profile but you has logged on with the default profile" and then a "windows Explorer has encountered a problem" appears and I can't do anything with it.  When I select 'close' the screen goes gray, then the same message appears.  I have to use the Task Manager to restart.  I did a repair of my XP install disc and also a system restore and still the same problem.  Help!

  Also, running service pack 3 before the repair.  Now on service pack 2 that I cannot access windows update to get updates.

  You have another administrative user you can connect to the system with and change the owner and permissions on the folder Documents and Settings of the other user with?

• Access to the hard drive internal

  Hello

  I currently have two hard drives in my PC. An SSD that manages windows and various other programs etc. In addition, another hard drive. call it a storage disk. At the moment it is accessible by any user of the PC. I was wondering if there is a way to limit disk storage of said access to individual logons? Thus, for example, if has and B were at the PC users... user A could see their files and not user B? Pretty much the same premise as a logon to their own profile and be able to only see their own stuff.

  Or is it possible to simply restrict the said walk completely one user?

  Any advice would be much appreciated!

  Thank you!

  Right-click any folder on the external drive, then click Properties, click the Security tab. Now, add or remove user names in the list at the top according to your needs.

  Warning: do not place the tick marks in the deny column. This is likely to have unintended consequences.

• Satellite L750 - access to the HARD drive recovery partition

  I need to reset the drive to factory settings, but can not access the recovery starts. I read the manuals

  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm
  http://APS2.toshiba-tro.de/KB0/HTD16036F0000R01.htm

  This information do not work for me. This utility, I did not at all.

  My serial number 7b421068w L750

  I tried to run the recovery partition, I disable for laptop and lit keyboard '0' key and tried other keys F1 - F12, but system just beep with a blank black screen and then Toshiba displays menu and the Windows loading as usual.

  He has a record of factory "HDDRecovery" on the logical drive D: with all default recovery files

  Post edited by: clients

  Missing a very important information: preinstalled OS the original that you have with your laptop or you have installed a clean version of Windows?

  When you buy the new book it comes with factory settings. If long your laptop has this plant, you will be able to install the recovery image according to instructions with F8 at startup. If you change something that it will no longer work (install own os, partition structure).

  In this case you must use the created recovery disc but I assume you didn't create one although it is clearly described in the document s user manuals.

  Problem is that you can't do much. Either it works or not. If there is no way to install image recovery I'm afraid you need to order the new Mr. recovery disk you can do it on https://backupmedia.toshiba.eu/landing.aspx

• C:\Windows\System32\Config\Systemprofile\Desktop is refers to a location that is not available could be on the hard drive or network

  I've updated IE8 cumulative security update [KB978207] message appears now as callender being disabled, he deleted all desktop icons, except the computer and recycle bin, completely changed browserappearance some don't, some icons work entered into binding system restore does nothing, systen32 files seem to be there
  I'm runningvista Home premium on a gateway double heart, Avg free, microsoft security essentials, advanced system care free
  can't seem to get rid of update or to find the right combination between the restore files
  appreciate help thank you

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:
  

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• access to the hard drive

  whenever I double click on my HD a window appears which suggests programs to open with. What is this caused by some virus? Malware?

  Morpheuz,
  This could possibly be caused by a virus or another type of corrupted file.  I suggest you run a virus scan first.  So if you have your XP CD, go to the command prompt and run sfc/scannow. You can also set the default program is explorer.exe. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A100 - question on the removal of the HARD drive

  Hi all

  I opened the back panel and have Visual access to the hard drive. It is placed in a kind of rubber cradle / cage. Please advise on how to remove the hard drive and replace it with a new one.

  I need to do this is because I am faced with recurring problems of bad sector and now XP will not boot. So I intend to install a new 160 GB HARD drive and use the recovery disc.

  Also, I enclose the picture of the HARD drive in the laptop when the case was opened.

  [http://img116.imageshack.us/my.php?image=toshibahddrd3.jpg]

  Looking forward to your prompt response.

  Thanks in advance.

  Move the HARD drive to the left and the HARD drive will be disconnected. Place it on a flat surface like desktop and remove the two plastic covers by moving them to the left or the right.
  All that s!

• You can skip the hard drive passwords?

  I don't always have access to each hard drive in my W530. In fact, I'm going to install Linux on an external drive and I prefer not having one of my hard drives internal to be accessible. Normally, when I do at home, I just unplug the readers that I do not want to write accidentally on, but doing this on a laptop computer, you must remove the drive with a screwdriver instead of just a disconnect quickly.

  Is there a way I can jump in front of the guests of HDD password and simply continue without access to the hard drive? I googled around and found nothing.

  If the player is pw protected and is physically in the machine, you will get the pw guest. There is no way to skip this step

• HP Pavilion dm1-4310nr Notebook - how to remove the hard drive

  I wish to have access to the hard drive and do not want to damage my system. After removing the battery, how do I access the hard drive Bay?

  Thank you very much!

  

• Qosmio - how to access the HARD drive?

  Hello
  the Qosmio G30 is completely 'dead' and I removed the two HARD drives.
  Anyone know how I could access the HARD disk without having to start the RAID... How could restore data by using the HARD drive as a USB device?

  Thank you
  Mike

  Hello

  You want to remove the internal HARD drive and want to connect it as external device using an external HARD drive enclosure?

  In this case you will need an external SATA USB controller because the Qosmio G30 supports SATA drives.