Access to the path 'C:\ProgramData\ATI\ACE\Profiles.xml' is denied.

Similar Questions

• FPGA Xilinx compilation failed. Access to the path 'C:\NIFPGA\corecache\activity.log' is denied.

  I just has my cRIO.  I installed all necessary software and drivers and have written a VI mode FPGA.  However, when I try to compile the code, I get the error of follow-up message (see attachment).  I contacted the support NEITHER and they have been unable to solve this problem at the moment.

  The engineer NOR gave me the following advice:

  ' 1. start the registry editor by selecting Start ' Run and then entering the window run regedit.
  2. press the Enter key to open the editor.
  3. find the following registry key in the path below:
  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\National Instruments\LabVIEW\11.0\AddOns\FPGA\CompilerPath_Xilinx12_4
  * the Wow6432Node is not correct in all cases. on my PC, you go to HKEY_LOCAL_MACHINE\SOFTWARE. National Instruments\LabVIEW\11.0\AddOns\FPGA\CompilerPath_Xilinx12_4
  4. on the data tab, you should see the path associated with your CompilerPath_Xilinx12_4. Please confirm that it is linked to the C:\NIFGPA\programs\Xilinx12_4
  If you Xilinx 11.5 installed, make sure it is also bound to the correct path.
  5. If you have previous versions of LabVIEW installed, you will need to go to these versions as well. For example if you have LabVIEW 2010 is installed, please, go to 10.0\AddOns\FPGA
  Make sure that the CompilerPath_Xilinx12_4 or the CompilerPath_Xilinx11_5 or the CompilerPath_Xilinx10_1 are all properly placed under the drive C as seen above in step 4.
  (6) make sure that the "Working Directory" under LabVIEW 11.0 has the right path of C:\NIFPGA\
  (7) after that, close the registry editor and navigate to where is the worker to compile the FPGA. By default, it should be here: C:\Program Files (x 86) \National Instruments\FPGA\CompileWorker
  (8) here open the document "WorkerRootDirectory.txt" and change the path. Make sure that it is pointing to the C drive.
  (9) save and close the file. Restart your computer.

  It was already correct and still impossible to compile.

  Usually, a "access to the path... denied." error comes from the permissions of the user.

  What operating system do you use?

  You use this tool from an administrator account?

  Is there a security policy on your computer which determines the permissions and user rights?

  Is it possible to run LabVIEW as an administrator?  (e.g. under Windows 7, you right-click on LabVIEW.exe and choose 'Run as administrator'.)

  Best regards

• System.UnauthorizedAccessException: Access to the path '[Namespace.InstallState]' is denied.

  Hello

  We have a Windows Service project that was developed using Visual Studio 2008.  After you build the project successfully, we used the installutil.exe to install the program as a NT service on a Windows Server 2003 R2 server. (Referring to the steps in the article: creating a Windows Service Application). It works very well.

  Now, we are upgrading to a Windows Server 2008 R2 Datacenter server. When I followed the same step to set up the NT service on the new server I got a message: System.UnauthorizedAccessException: access to the path 'C:\inetpub\wwwroot\_uat\WindowsService\bin\Debug\WindowsService.InstallState' is denied. I checked the permissions on the _uat folder are identical to what is on the old server. I have came across this article (kb946503) that describes the similar problem, but on the remote computer to install (I am running the installutil.exe locally on the new server). Anyone know how to fix this?

  Victor Zhang

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Access to the path 'C:\Users\User-2\AppData\Roaming\Hewlett-Packard\HPAdvisor\HPAdvisor.MainFrame.Controls.DockPopup.Main.xml' is denied.

  Someone at - it an idea of this error message: [access to the path 'C:\Users\User-2\AppData\Roaming\Hewlett-Packard\HPAdvisor\HPAdvisor.MainFrame.Controls.DockPopup.Main.xml' is denied.]

  This happens only if I "User Account Control" is enabled in the administrator account.

  Hi GA,.

  Is the default Administrator account or an account that you created?

  Method 1:

  You can try creating another account with admin rights and see if that solves it.

  Create a user account

  If the problem does not occur, then check out the following link and follow the steps to repair the corrupted user profile:

  Difficulty of a corrupted user profile

  Method 2:

  Also, if this problem just started, then try to perform a system restore, and check.

  You can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

• Access to the path is denied

  Hey, I tried to open this file, but I got this error...

  The exception text *.
  System.UnauthorizedAccessException: Access to the path 'C:\String.wz' is denied.
  at System.IO.__Error.WinIOError (Int32 errorCode, String maybeFullPath)
  at System.IO.FileStream.Init (String path, mode FileMode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, bufferSize Int32, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
  at System.IO.FileStream... ctor (String path, FileMode mode, FileAccess access, FileShare share)
  to System.IO.File.Open (String path, FileMode mode)
  at WzLib.WzFile.ParseMainWzDirectory)
  at WzLib.WzFile.ParseWzFile)
  at Decrypt.MainForm.load_file (String path)
  at Decrypt.MainForm.button1_Click (Object sender, EventArgs e)
  at System.Windows.Forms.ToolStripItem.RaiseEvent (Object key, EventArgs e)
  to System.Windows.Forms.ToolStripMenuItem.OnClick (ByVal e As EventArgs)
  to System.Windows.Forms.ToolStripItem.HandleClick (ByVal e As EventArgs)
  at System.Windows.Forms.ToolStripItem.HandleMouseUp (MouseEventArgs e)
  at System.Windows.Forms.ToolStripItem.FireEventInteractive (EventArgs e, ToolStripItemEventType met)
  at System.Windows.Forms.ToolStripItem.FireEvent (EventArgs e, ToolStripItemEventType met)
  at System.Windows.Forms.ToolStrip.OnMouseUp (MouseEventArgs mea)
  at System.Windows.Forms.ToolStripDropDown.OnMouseUp (MouseEventArgs mea)
  at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.ScrollableControl.WndProc (Message & m)
  at System.Windows.Forms.ToolStrip.WndProc (Message & m)
  at System.Windows.Forms.ToolStripDropDown.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5485 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
  ----------------------------------------
  WzRepacker
  Assembly version: 2.1.0.0
  Win32 version: 2.1.0.0
  CodeBase: file:///C:/Users/Alvin/Desktop/modified%20harepacker%20 (final) WzRepacker.exe
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5491 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5485 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5491 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  WzLib
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  CodeBase: file:///C:/Users/Alvin/Desktop/modified%20harepacker%20 (final) WzLib.DLL
  ----------------------------------------
  Microsoft.DirectX.AudioVideoPlayback
  Assembly version: 1.0.2902.0
  Win32 version: 5.04.00.2904
  Code: file:///C:/Windows/assembly/GAC/Microsoft.DirectX.AudioVideoPlayback/1.0.2902.0__31bf3856ad364e35/Microsoft.DirectX.AudioVideoPlayback.dll
  ----------------------------------------
  System.Configuration
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5483 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  System.Xml
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5485 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Now I use the other program to open the file, it shows this error

  Error initializing the String.wz (Non-negative number required. Parameter name: County). Check that the directory is valid and the file is not in use.

  This is an application-specific error. It has nothing to do with Windows. You should check with the supplier of this 'another program '.

• Error database that can be updated windows found 0 x 80070490. access to the path "C:\windows\softwaredistribution" is denied. »

  Original title: error in database that can be updated windows found 0 x 80070490

  When you try to repair windows update on my rt surface I get the following error message - "error in database that can be updated windows found 0 x 80070490.  repair windows update the database, access to the path "C:\windows\softwaredistribution" is denied. "Any help?

  Hello

  Welcome to the Microsoft community.

  It seems that you are facing problems trying to fix Windows update. We're here to help. It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. Why are you trying to repair Windows update? Are you facing problems during the installation of the updates?

  To resolve this issue, follow these methods:

  Method 1:

  I suggest you follow these steps to run the Windows update Troubleshooter:

  a. open Control Panel.

  b. click on Troubleshooting.

  c. click show all in the left pane of the screen.

  d. in the list of options, click Windows update.

  e. click Next and follow the on-screen instructions.

  Method 2:

  I suggest to refer to the article and try to run the system update readiness tool:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  If you are always faced with the question, please answer and we will be happy to help you.

  Thank you.

• access to the path of QML

  Hi, how to access the path an audio or image QML file and send it to the CPP file for further processing.

  In fact, I'm looking for the code that retrieves the filepath and filename information when the "onTriggered" handler is called when the user clicks on the file.

  Thanks for the help.

  or you can also try:
  give IDs for ListView listView

  _mycode. FileInfo (listView.datamodel.Data (listView.Selected ()). URL)

• AEGP_ObjectType_VECTOR and access to the path of control points

  if (type == AEGP_ObjectType_VECTOR( )

  
  

  There is no much to find associated with this object type. I understand that it is a shape layer, but I still found how can get the path on this layer.

  A cable would be greatly appreciated.
  

  Research.

  Realized that there is no API specialized for VECTOR (shape layer)

  It's just a tree of dynamic flow.

  And, strangely, the shape layer is implemented with a mask...

• Access to the network-> ACS 5.4 authorization profiles

  Hello

  For ACS 5.4:

  In-> authorization of network access profiles, there is an access profile allow it. If you try to change it to the top of the POPs a message that says:

  "The profile you have selected is reserved and cannot be deleted or changed.

  Nobody knows what this profile contains in its base of rules? If I wanted to create a similar profile what common tasks or attributes Radius would I use? The same would go for a profile to deny access. No one knows what it would look like?

  I looked at common tasks and the Radius attributes for the new profile, and it seems not very intuitive.

  Thank you

  Jim

  Authorization profiles are used to define the RADIUS attributes to return in an Access-Accept

  The permitted access profile contains no attributes at all and is actually an empty response. You can create an equivalent profile by simply giving it a name and no other attributes.

  Common tasks and the RADIUS attributes are the two ways to set the attributes to return:

  -Normal: provide an abstraction of seizure/selection of the use-specific RADIUS attributes and values are entered when using

  -RADIUS attributes. manually enter the however, attributes, and its value

  There is only one profile predefined for DenyAccess that issues a rejection of access and can not be created manually

• export plugin: how to learn the path of the source of the exported files?

  Short version: an export plugin to determine the path of the source of an image that was exported as a copy in a temporary directory?  If so, how?

  Long version...

  I am a user SDK newbie, writing a plugin which implements multiple images to my own external program which them melts and produces one or more new images that the user probably wants to reimport into Lightroom.

  I have the plugin works OK with export to a temporary directory.

  Now I would like to add a feature in which my program gets access to the path of the folder to the original image, so that it can offer the user the ability to record images of result in the same directory.

  Is it possible for the export plugin get the source for an exported image path, say an object of rendering?

  Can also export plug-in information identical or similar, otherwise, for example by determining the path for the folder that is currently selected in the Lightroom Catalog?

  Thanks for your suggestions!

  -Rik

  I don't think that the metadata for source path are in the exported file.

  Once I manually coded the source path in the jpeg file to export, but I stopped doing that, now I just save some info I need as part of the ID "at a distance" (assuming that to publish the service).

  But maybe I misunderstood. I mean, when export the source path is readily available as rendition.photo:getRawMetadata ('path') - is that what you mean? (I thought before that you were speaking after export, possibly loooong after export...).

  Rob

• Is the path of export to illustrator the only way to get a psd w / clipping appears in Illustrator?

  I'm wasting time having to put my image in Illustrator, then manually align the clipping path. You used to be able to save a file with a clipping path an EPS in photoshop, select "maintain vector data", place it in illustrator and cmd-press Y to see the clipping path. I need the image and clipping in Illustrator and image path is too complex to create a mask of Illustrator. I tried to save it as an EPS but "retain vector data" is gray.

  Save a PSD. If you need access to the path, then incorporate him (the image in Illustrator).

  If you just want to use the path for cutting, set it as a clipping path in Photoshop.

• Access to the PRODUCT_USER_PROFILE error

  Hello
  
  people 8.42.15, CRM88 Oracle on a Win 2003 Server tools
  When loging as sysadm via SQLPLUS, I have the following error:
  C:\Documents and Settings > sqlplus sysadm/s*@MYDB
  
  SQL * more: Release 10.2.0.1.0 - Production Wed Nov 26 16:00:54 2008
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  Access to the PRODUCT_USER_PROFILE error
  WARNING: Product user profile information has not loaded!
  You may need to run PUPBLD. SQL as SYSTEM
  
  Connected to:
  Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
  With partitioning, OLAP and Oracle Data Mining options
  Release 9.2.0.7.0 - Production jserver
  
  Any idea? I thank.

  Run the Oracle script %ORACLE_HOME%\sqlplus\admin\pupbld.sql

  Nicolas.

• Since the last nights update I get now launching explorer.exe "windows cannot access the specified device, file, or the path?

  Since update of last nights, I get now launching explorer.exe "windows cannot access the specified device, file, or the path?

  Hi Jemd3,

  I suggest you to completely remove Norton of the system using Norton Removal Tool and check if the problem persists.

  Method 1:

  Maybe it's that your computer is affected by virus and malware. I suggest you run an online anti-virus scan and a scan for Malware. See the links below.

  Microsoft OneCare:

  http://OneCare.live.com/standard/EN-US/3/default.htm

  Malicious software removal tool

  http://www.Microsoft.com/security/malwareremove/default.aspx

  Get a free PC safety scan

  http://OneCare.live.com/site/en-us/default.htm

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why some items in 'Open an existing project' have just the name of the project and others have access to the entire file path?

  I have SP1 2012 LabVIEW and on the main screne of LabVIEW selecrt "show projects".

  Why some elements of 'Existing Open' (project) have just the name of the project and others have access to the entire file path?

  Examples of two lines in the list of projects.

  Ping.lvproj (with a path: C:\Users\mlevine\Documents\MPCE EQT\EQT Software\Ping.lvproj)

  C:\Users\mlevine\Documents\Common package Mission trainer (CMPT) \SUW Surface Warfare\Weapon permission Panel (WAP) \WAP LabVIEW Software\WAP fire authorization server 28 April 2015

  No chance, it's because I made a copy of this software and stored on a network drive power off and it went out of this network drive?

  So if LabVIEW sees two or more versions of the same software, he decides to use the name to differentiate between full path?

  I'd still rather it shows just the name of the project and if you hover over the name it shows the full path.

  Thank you

  Mark

  If you have opened a project of the same name from a different location, it is when it shows the full path both - in this case showing just the name of the project would not help because it would be the same thing!

• connected as long as User1 I can only access the srv record (Explorer) - execute / run as he is denied (the path not found or insufficient rights)

  Original title: denied enforcement program

  Configuration:
  -Win server 2003 standard (in the Working Group)
  -Portable Acer Aspire 5100, Windowx XP Home Edition sp3

  Problem:
  On laptop, there are 3 users: administrator (administrators), (power user) User1 and User2 (user).
  Logged on as administrator or User2 I can access the server disk, run the executable SRV drive etc, but connected as
  User1, I can only access the srv record (Explorer) - execute / run as it is denied (the path not found or)
  insufficient rights). The same phenomenon occurs even if User1 receives administrator rights.
  On the server side there is no restriction or limitation to User1 (because it's in the group, where
  any member of this group (also User2) has no problem). Logging as User1 on others
  PC there is no problem.
  Grateful for any suggestions / help.
  Marjan

  Hello

  Try to take possession of the file or program and check.