Access violation on EIP - causing Crash

Similar Questions

• access violation

  OXOOBECA58 {tried to read 0 X 0080001} was abolished an access violation when trying to play a game that I downloaded. I have Windows xp home edition

  Hello

  first of all, you should check your RAM for errors using Memtest +.
  Access violations are often caused by memory problems.

  Concerning

• "Access violation at address 20202000. Read of address 20202000. »

  Original title: Access violation at address...

  I use a program called TPEditor, and every time that I try to compile the software it gives the error "access to the 20202000 address violation. Read of address 20202000. "The numbers vary according to the different types of software in the access violation error. It crashes the program and I have to go into the Task Manager and end task. I have Windows 7 and it's a new HP laptop so I don't think that there is a virus problem. Any ideas would be greatly appreciated...

  Hello

  Thank you for your response.

  I suggest you to uninstall and reinstall the software TDEditor and check.

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

   

   

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• 11 workstation reports (0xC0000005 Access Violation) Crash at startup but VMs works without any Apparent problem

  A new installation of the workstation 11 (11.1.0 build 2496824) on a new installation of Windows Server R2 Essentials 2012 crashes on start up (front of start/resume all VMs) with a message box indicating a fatal error of VMware Workstation (vmui) occurred and identifies the exception 0XC0000005 access violation).

  If I click OK in the message box, work station closes.  If I don't click on OK in the message box, I can always transfer the focus to the window workstation and workstation seems to behave normally (that is, I can start/resume / suspend virtual machines and virtual machines behave normally).

  I have attached the log file.

  Any thoughts on what is the cause?

  This problem is fixed in VMware Workstation 11.1.2.

• CVI executable causes an on update of Windows 10 anniversary 0xC0000005 Access Violation.

  Created executables always causes an Access Violation (0xc0000005 exception) to the closing period on Windows 10 RS1 (update of the anniversary).

  This problem occurs in LabWindows CVI 2015 and 2015 SP1.

  How to reproduce: simple program to create and compile with the (x 86) release profile by default.

  for example:

  #include "test.h".
  
  
  
  
  int ph;
  int __stdcall WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance,
  
  					   LPSTR lpszCmdLine, int nCmdShow)
  
  {
  
  	If (InitCVIRTE (hInstance, 0, 0) == 0)
  
  		Returns - 1;    / * memory * /.
  pH = LoadPanel (0, "test.uir", group of EXPERTS);
  
  	DisplayPanel (ph);
  
  	RunUserInterface();
  return 0;
  
  }
  int CVICALLBACK CallExit (int, int int event, control panel,
  
  						  void * callbackData, int eventData1, int eventData2)
  
  {
  
  	switch (event)
  
  	{
  
  		case EVENT_COMMIT:
  
  			QuitUserInterface (0);
  
  		break;
  
  	}
  
  	return 0;
  
  }

  The problem is visible on the control panel > reliability history > Error Reporting:

  

  Also the code of the executable file (exit code) is always 0xc0000005 instead of zero.

  To check out more easily code can be called the executable through file .bat:

  off @echo
  
  Test.exe
  
  echo ExitCode = %ERRORLEVEL%
  
  pause

  I have observed that if multiple instances of the same program are running, only block when the last instance is closed. It seems that the problem occurs at the time that the CVI runtime is released from the ram. (The latter is only a guess)

  Hello

  We did some research and saw that the failure is related to some police files in

  c:\Windows\SysWOW64\cvirte\fonts

  c:\Windows\System32\cvirte\fonts

  Could you try deleting these files and see if the heater is always performed. If this isn't the case, it would be a work around if you do not use these fonts.

  We continue the investigation to see the exact cause

• Software BlackBerry cannot connect to the BB to BB link identification service after that PeerManager caused an Access Violation (0xc0000005)

  Downloaded and installed the latest version of BB link V 1.2.2.13 on my PC under Win XP SP 3 no noted problem.
  I just bought a new Z10 which has the last OS 10.2.
  Gets a BB ID and I am able to log in via the Z10, as well as via the browser (Firefox) on my PC.
  When I start BB link and select Sign In, I do not get a prompt for my BB ID or a password.
  I get a screen that says "unable to connect to your Blackberry ID confirm that you're connected to the Internet and try again."

  I can connect my Z10 to BB Link (via USB). The Z10 is detected and I can synchronize.
  Then, I created log files.
  The PeerManager_ERRORLOG. Text says that
  PeerManager caused an Access Violation (0xc0000005)
  in the PeerManager.exe module to 001 b: 004093a 8 CurrentThread:0000071 C.

  Considering the Knowledge Base of Blackberry without result.

  How do I get this resolved?

  Can I submit an incident report?

  The problem was solved by upgrading from Windows XP to Windows 7.

• How to troubleshoot Workstation Crash (vmui) - Access Violation?

  As of recently I get the following error (Windows Workstation 11.1.0,) when you start the user interface.

  ---------------------------

  VMware Workstation error

  ---------------------------

  Fatal error VMware Workstation: (vmui)

  Exception 0xc0000005 (access violation) occurred.

  A log file is available in "C:\Users\mgill\AppData\Local\Temp\vmware-mgill\vmware-ui-3224.log".

  You can request support.

  To collect the data to submit to the VMware support, choose "Collect load data" in the Help menu.

  You can also run the script 'vm-support' in the folder my computer directly.

  We will respond on the basis of your entitlement to support.

  ---------------------------

  Ok

  ---------------------------

  Nothing obvious in the newspapers. I repaired the installation. Uninstalled and reinstalled. Updated PowerCLI (who is also installed) and nothing don't change.

  Ironically, I discovered that if I don't know the error and just continue to work, everything seems to work properly. By the time I hit ok on the same windows if the user interface disappeared.

  Any help to remove this error is greatly appreciated.vm

  Here is the part of the log:

  2015 05-26 T 13: 43:01.969 + 02:00 | vmui | I120: cui::ComponentMgrCDS:RefreshComponentListWithDefaults: CDS_UNKNOWN_PRODUCT_ERROR for player-linux product

  2015 05-26 T 13: 43:01.969 + 02:00 | vmui | I120: CD: CdsUtil_QueryMsiByProductCode: {A53A11EA-0095-493F-86FA-A15E8A86A405} does not know in the MSI database.

  2015 05-26 T 13: 43:01.969 + 02:00 | vmui | I120: CD: CdsUtil_QueryMsiByProductCode: {313C6E9F-180C-46C3-8CB1-A2AFB34DF643} does not know in the MSI database.

  2015 05-26 T 13: 43:01.970 + 02:00 | vmui | E105: Error CDS: CdsUtil_QueryMsiPropertyByProductCode: MsiViewFetch failed: 259.

  2015 05-26 T 13: 43:01.971 + 02:00 | vmui | E105: Error CDS: CdsUtil_QueryMsiPropertyByProductCode: MsiViewFetch failed: 259.

  2015 05-26 T 13: 43:01.971 + 02:00 | vmui | E105: Error CDS: CdsUtil_QueryMsiPropertyByProductCode: MsiViewFetch failed: 259.

  2015 05-26 T 13: 43:01.972 + 02:00 | vmui | E105: Error CDS: CdsUtil_QueryMsiPropertyByProductCode: MsiViewFetch failed: 259.

  2015 05-26 T 13: 43:01.973 + 02:00 | vmui | E105: Error CDS: CdsUtil_QueryMsiPropertyByProductCode: MsiViewFetch failed: 259.

  2015 05-26 T 13: 43:01.973 + 02:00 | vmui | E105: Error CDS: CdsUtil_QueryMsiPropertyByProductCode: MsiViewFetch failed: 259.

  2015 05-26 T 13: 43:01.974 + 02:00 | vmui | I120: cui::ComponentMgrCDS:RefreshComponentListWithDefaults: CDS_UNKNOWN_PRODUCT_ERROR for product ws-linux

  2015 05-26 T 13: 43:01.974 + 02:00 | vmui | I120: CD: CdsUtil_QueryMsiByProductCode: {A3FF5CB2-FB35-4658-8751-9EDE1D65B3AA} does not know in the MSI database.

  2015 05-26 T 13: 43:01.974 + 02:00 | vmui | W110: cui::ComponentMgrCDS:RefreshComponentListWithDefaults: empty database installation! The substitution of installation state of windows-ws

  2015 05-26 T 13: 43:01.979 + 02:00 | vmui | I120: REGIONAL windows-1252-> user NULL = 809 system settings = 409

  2015 05-26 T 13: 43:02.220 + 02:00 | vthread-6 | I120: VTHREAD initialize identifier of the thread 'vthread-6' 6, host 10700

  2015 05-26 T 13: 43:02.262 + 02:00 | vmui | I120: VMMgr::OpenVM (cfgPath = C:\Virtual Machines\mgil-mint\mgil-mint.vmx)

  2015 05-26 T 13: 43:02.272 + 02:00 | vmui | I120: CVMUIApp::OpenTabInt: open

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | I120: BasicHttpOnSent: xmlStrcmp

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: Unhandled Win32 SEH Exception

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: - Win32 exception caught, exceptionCode 0xc0000005 (access violation).

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: ExceptionAddress 0x5caf42aa eflags 0 x 00010282

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: rwFlags 0 badAddr 0

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: eax ebx 0 0 x 1 ecx 0x35f1d8

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: edx 0xa70048 esi 0x35f1d8 edi 0x35f158

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: eip 0x5caf42aa esp 0x35f0c0 ebp 0x35f14c

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: The following data was delivered to the exception:

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110 :--0

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110 :--0

  He just disappeared!

  I uninstalled Visual Studio 2015 Preview. (Including .NET 4.5.3 preview and preview 2015 C++ Runtime).

  After that the error disappeared.

• I have problems to install CS6 Design & Web Premium. From the CD, the Setup program crashes or he tells me it's a forgery (it isn't). In the Web download file, I can't even extract. I get an error of access violation.

  I have problems to install CS6 Design & Web Premium. From the CD, the Setup program crashes or he tells me it's a forgery (it isn't). In the Web download file, I can't even extract. I get an error of access violation. I'm on a Surface Pro Windows 3.

  Solution posted in duplicate message I'm having various problems installation CS6 Design & Web Premium. From the CD, the Setup program crashes or he tells me it's a forgery (it isn't). In the Web download file, I can't even extract. I get an error of access violation. -This message of locking... MOD

  To contact our support staff, you must click on the following link: https://helpx.adobe.com/contact.html

  In at top right, sign in to adobe.com with your Adobe ID

  Select the category of assistance you need and once completed, you will see the blue band that still says "need help, contact us.

  A click on that and you should see options to chat/phone.

• NI MAX with USB devices access violation

  I found a lot of messages about access violation, but most of them are about LabView and not MAX OR, as is the case here.

  I get an access violation error (0xC0000005 at PPC = 0x106399AE) whenever I try to create a new task of MAX OR by selecting a USB DAQ device. I tried with USB-6009 and USB-6211, same problem. The device is properly recognized (test) but when I try to create a new task I complete all the procedure, and when cliquerai I finish I get the error. This also causes LabView programs that use the tasks of MAX OR crashing.

  First of all, this happened after the NI DAQmx drivers update to a new version, but then I recognized that this version was incompatible with Labview installed on this machine (8.6). I tried to fall back by using a restore point in windows and reinstall the 9.5.1 DAQmx drivers (the latest drivers supported by the version of LabView.

  I tried to 'Reset Configuration data' MAX OR (under the Tools menu) without success. The WindowsXPUSBhotfix is also installed in the system. Any help?

  I also sent a support NC ticket: c82f5b4f-d774-40a2-8341-4dbeee9df876

  Specifications of the PC:

  Windows XP SP3

  LabVIEW 8.6

  NOR-DAQmx 9.5.1

  The error was eventually resolved by uninstalling OR MAX and LabView and then reinstall all the software needed. In particular, the configuration that worked was:

  -NI MAX 5.1 (includes NOT-DAQmx 9.5.1)

  -LabView 8.6

  -2.6 OR-488. 2 (including NI-VISA 4.4.1)

  the last of them was necessary to connect to another device to purchase. With the above configuration, the wizard DAQ worked and generated a task, but when the program was launched, the task was not able to recognize the good device (unit name is an empty string). So I converted it to a NOR-DAQmx task, and now it works. (Don't really know if this quick passage would have been a good work around from the beginning.)

• How to fix and debug an error of access violation.

  Hello

  I'm stuck with an access violation error that requires my exe to stop construction. I tried also to the development environment, but it's the same here. The error occurs after 5-60 minutes.

  I played a bit with the disabling of a portion of the program where it was possible and I think that I am now able to accuse the vi 'gastimer.vi '. But since this vi leads through the measurement procedure, there are some commands coming out which I was not able to map one to one.

  My question is: what are the causes access violation errors? I have no call from dll, no third-party library, the communication of material is made series of COM ports. The principle of the architecture is something adapted from producer to consumer loop, except that I often have more than one consumer, so I called them like loop controller - multiple tasks. Communication within this loop (tasks) are by cluster queue enumerator with a Variant.

  Indictments vi 'gastimer.vi' is passed an older and simpler architecture. This vi works with the structure of sequence and a large number of local variables.

  Since I test the sensors on their reaction to the concentration of gas I have 10 agrees to which I am listening at the same time.

  What styles or architecture are subject to access violations? Where can they go? where should I look more carefully in the code?

  How can I use the desktop execution trace toolkit for more information on the cause of access violation?

  Attached are two different lvlog, but I guess having the same source of error. In the second lvlog are two named vi. What do have to do with the access violation error? Can what information I get these files lvlog?

  Last attachment shows a fatal runtime error that happens quite a bit frequently in the recent time when working with this project. Could there be a connection, probably a vi crashed, typedef or something else?

  Thanks for any help

  U. Siegenthaler

  I solved the problem. The accident moved no more.

  I found a bug in my queue reference interview. I have a record where can I register reference queue and remove them again of this register. The bug was that under certain conditions, I deleted the reference of the bad queue from the registry. This bug had to the fact that there was a reference to queue in the registry that should have been removed. The application now tried to place an element in this Ref queue where, at the same time elsewhere in the application process tried to release this reference to queue. Apparently, if these two events occure at the same time, or when a synchronization that gives an access violation crash.

  My suggestion for all of you with an access violation crash: take a look at your reference to queue maintaince and check if you publish queues at the same time you're items from the queue.

  Best regards and thanks for the help

  URS

• 0xc0000005: Access Violation.

  Hello

  I just want to add my activeX server in the process in labview activeX container. But the labview crashes.

  I have my debug dll and labview with the debugger to see what are the causes of the crash. After my debugging dll displays

  no problem at all and I get the following error messages:

  First chance exception in LabVIEW.exe (VISUAL. (DLL): 0xC0000005: Access Violation.

  First chance exception in LabVIEW.exe (KERNEL32. (DLL): 0xE06D7363: Microsoft C++ Exception.
  First chance exception in LabVIEW.exe (NICONT. (DLL): 0xC0000005: Access Violation

  VISUA. DLL is my dll. Insertion of my dll to the bench test and other containers work very well.

  I use version 8.1 of labview. My activeX server is written in c ++ and I use visual studio 6. I do not use MFC but QT.

  I hope to get a response from you.

  Thanks in advance,

  Yang Salmon

  Hello guys,.

  Thanks for your kind responses and help. I just discovered that there is a bug in activeQt. I just corrected the bug to test if it helps. And Yes, that's it, so I can now integrate my activeX control in labview and it doesn't crash at all. So there was no problem with the nicont.dll, the access violation in activeqt dll FAILED and report the bug to trolltech guys.

  Thank you guys a lot.

  Kind regards

  Yang Salmon

• Exception 0xc0000005 (access violation) occurred

  I still encounter the error "Exception 0xc0000005 (access violation) has occurred." and then my VM crashes.  I moved the VM to two different hard drives (SSD and hard drive) and the error still occurs.  I also added an exclusion to my virus protection to exclude all of the VM image disk resides on.  Still no luck.  He goes from 5 to 20 minutes after I start the virtual machine.

  I added the last few log files and dmp.  I'd appreciate any help people can provide.  I spent days trying to find and solve the problem without success yet.

  Thank you.

  -Larry

  San Jose, CA

  Hi Larry,

  Thanks for the update.  Unfortunately I'm pretty out of direct measures to deal with the crash.  I can see the most recent newspaper that you have updated the drivers, but still, it crashed in exactly in the same place.

  A few quick observations and an indirect approach in case they are useful:

  -Your virtual machine is configured for a client Windows Vista x 64, but his name suggests that it is Windows 7 x 64.  If it is really Windows 7 x 64, you should probably go to VM > settings > Optionsand under the guest operating system, choose the Version: Windows 7 x 64.  It is unlikely that it will affect the crash of graphics, but it is generally advisable to ensure that the good guest what OS is chosen even when.

  -If your VM does not need high performance 3D graphics, you might be able to work around the problem by disabling hardware acceleration of graphics 3D in VM > settings > hardware > display, clear 3D graphic acceleration.

  -If the accident happens at seemingly arbitrary moments once the virtual machine boots, it might be a graphic 3D Screensaver inside the guest who is causing the problem... (?).  If so, try disabling the screensaver of the guest OS.

  Good luck!

  --

  Darius

• Library of nivision - imaqMakeRect: access violation writing location

  I am writing a script of image acquisition using the nivision and libraries niimaqdx in python 2.7 using types. When I use the imaqMakeRect function to make a Rect structure to be used in the imaqImagetoArray function, I get a write error access violation.

  It's the line that causes the problem - imaqMakeRect (c_int32 (0), c_int32 (0), c_int32 (0x7FFFFFFF), c_int32 (0x7FFFFFFF)).

  which results in the error: WindowsError: exception: breach of writing 0 x 00000008 access

  The location of access violation seems to depend on the value of the first argument. Any ideas on what could happen? and how to fix it?

  Thank you!

  Thaks for the suggestions!

  This problem himself.

  types import *.
  IMAQ = windll.nivision

  class Rect (Structure):
  _fields_ =]
  ('top', c_int32);
  ('left', c_int32);
  ('height', c_int32);
  ("width", c_int32);
  ]

  imaq.imaqMakeRect.restype = Rect.

  IMAQ_NO_RECT = imaq.imaqMakeRect (c_int32 (0), c_int32 (0), c_int32 (100), c_int32 (100))

• access violations...

  have a game site I used 'exclusively' for two years now... old DELL crashed traded in for a new computer... it was built by a computer wiz veteran of 30 years... now on some of my new games, I "access violations" and today 12/20/11 downloaded a game and came back with a message of may 'virus'?... not sure but have other games that work okay... have you contacted the customer service about... I do not use another Web site for the games... all my computer "guts" is Ms... win xp, ie8, essentials, etc... not know why this is happening now?... the answers to save my 'mental health'... thx

  Is the site Big Fish Games?

• Exception number: c0000005 (access violation)

  My computer has been crashing on and off the years and I finally decided to do something - this time the paper in "Dr. Watson" says:

  Application exception occurred:
  App: (Pid = 2408) C:\WINDOWS\Explorer.EXE
  Date: 03/09/2011 @ 04:18:08.546
  Exception number: c0000005 (access violation)

  There is a long list of similar exceptions, but on different programs, one of the programs presented frequently is PowerDirector.

  Someone has ideas on how prevent this?  very much appreciated.

  Hello
  I suggest you to follow the steps below and check if it helps.
   
  Method 1: Try to start the computer in safe mode and check if the same problem occurs:
  http://support.Microsoft.com/kb/315222
   
   
  Method 2: If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.
  A clean boot helps eliminate software conflicts. Visit the link below to know how to put the computer in a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: Once the troubleshooting completed, reset the computer to start as usual.
   
  Hope this information is useful.