Access Wi - Fi bad after hibernation or standby

Similar Questions

• Tecra S1: OS cannot recognize the CD Rom after hibernation or standby

  Hello world
  I have a problem with my laptop Tecra S1 and the operating system Windows XP Professional. My laptop can not recognize the CD ROM drive after hibernation modes or in sleep. And when I checked the status of the device, he told me this message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) ». I tried to uninstall the driver and install it again, but it did not help. And if I restart the computer then the problem is solved but y at - it someone knows how to fix this problem without having to restart the laptop?

  Thank you very much

  B. regards
  Wael Devaud

  Hello

  Maybe this article can help you
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;316575

  Good bye

• Laptop does not return after hibernation or standby

  original title: cell phone crashes

  When mobile switch off switch on if necessary takes a few attempts before it lights up as if it blocks wile its judgment

  After that you have managed to turn it back on, do the following:

  1. make sure that the computer is virus-free
  Use Malwarebytes:
  http://www.malwarebytes.org/ ... pickthe free version.

  2 run a file system check to ensure that none of the corrupted files.
  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  3. run a disk check for corruption and possibly repair errors and bad sectors on the hard disk.

  Start button > Search box, type cmd > look up, right-click on cmd.exe > Run As Administrator > in the black and white window, at the command prompt flashes, type chkdsk/f/r > press the Enter key.
  Note: there is a
  space between 'chkdsk' and ' / '.
  The screen will say something like cannot do it now, but you want to run it on reboot. Click on 'y' as in Yes > press > window cmd of output.
  Restart your computer. It will take a while. DO NOT stop the machine. Just wait.

  4. optimize performance
  http://support.Microsoft.com/kb/959062

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

• ACPI temperature is bad after hibernation

  
  

  Cause of this Comodo Firewall issue with the defence. I have uninstall and my problem is solved.

  Message edited by KOCATÜRK on 20/05/2008 01:31

• Satellite M70-148 - power on problem after hibernation

  Hello:
  Sometimes, I have a problem I can not turn on after hibernation. The fan starts, but the computer does not start again. I can only turn off again by pressing the button for a few seconds. When I remove my power cord and press the power button, I am able to start up. I can solve this?

  I've been on the internet looking for a solution and found this description of the problem, which is exactly what I have, but unfortunately there is no solution.

  "
  I'll explain the problem in detail, right after hibernation or standby IF you press power button / stop it goes blue led fan starts, HD led lights, led battery, power adapter led (if its connected) and a cd player make it sound as if he looking for a CD, and THEN stopped fan HD led turns off, no sound from CD, leaves u with button only works / stop led on, a pretty frustrating blue

  After waiting, u eventually gave up, turn it off by prolonged pressure on the button / stop and then no matter wut u do, simply starts only even the sounds and the leds as mentioned above, nothing on the screen as if its dead! No logo, no nothing.

  Give him a time (about 15 min with battery connected, or 5 minutes or less with the battery) press the button, IT U - GO, works perfectly!

  same case with the judgment but not always as put into hibernation and sleep (but once made wake-up from standby mode!), but most of the time after the judgment, you have to wait 15 min!

  No memory connected USB flash or something else!

  I have installed winXP pro SP2 above and installed the drivers and the Microsoft HOT fixes too, but the problem remains.

  I also made recovery from the CD of restoration which follows, also not good!

  I noticed that if you disconnected the battery the appliance needs less time to wake or boot. about 5 min.

  what kills me, is that the device works perfectly and I love it! I've had this problem with her!

  So what I need to know is the following: is there anyway to weather course if it's a hardware or software problem?

  its not easy to go to service local cuz its in another city! I need to try first what it takes to fix it on my own!
  "

  Thank you for your time!

  Well, there's not much to do. You have some many possibilities. Check your installed BIOS version and compare it with the version on the Toshiba site.
  If there is a newer version so you can try to update the BIOS. But please be careful.

• Equium A110: Cannot use LAN after wake up from hibernation or standby

  Hi guys

  I can't use lan on my tosiba equium A110 after he wakes up from hibernation or standby. Lan icon there is bur that the internet will not work. Please help me.

  Another problem. When I try to cut something I can't paste it if I open a new folder. I need to keep the file open back cut once again and then paste it. I mean that if after the cut, I open any folder it won't paste it.

  Please help me.

  Thank you

  Hello

  Have you tried to update the connection? Something similar happens on my laptop, but not with LAN but with WLan. If you right click on the little icon of lan, you will see the option to repair. Check it out.

  Also found this possibility. I put t know if it will help but try it.
  1. go to [start]-> [Control Panel]-> select [System]
  2. the system properties dialogue box select [Hardware] tab-> click [Device Manager]
  3. in the Device Manager dialog box, select [network adapters]-> double-click [Intel (r) PRO/100 VE Network Connection]
  4. go in the [Advanced] tab-> property [Wake on settings] select-> Select [Wake on Magic & realized]
  5. Press [OK] to close the dialog box.

• Equium - dead after hibernation, the system recovery does not work

  Hello
  I'm trying to fix the laptop of one of my friends, but so far without success. It's a Toshiba Satellite with Vista.

  She had problems with a black screen after startup in Windows Vista. I found a work around for this problem, but it was a little complicated for her... She doesn't know much about computers. ;)
  So I but it would be a good idea to tell him to always use hibernation. However, when I put the portable standby extended, all seemed fine, shutdown, power off.
  I tried and then turn it back on. Light turns green, cd drive makes noises. Nothing more. Screen remains completely black. No sounds. Keyboard input does not work. No access to the Manager startup or anything else. He left light until I pass him by pressing the button for a few seconds.
  I removed the battery and put back in place, without result.
  Connection to an external monitor shows no results.
  When I put the original CD recovery Toshiba, no results.

  So, basically a cell phone dead. Ah yes, I'm in the Brazil in a small village, away from the stores of tech support or computer. Maybe a problem material, but all was working fine until I used the hibernation.

  Any help or ideas would be very appreciated! ;)
  Daniel

  Hello

  My laptop could not wake up after hibernation too but I managed to wake up again.
  This;
  Disconnect the power adapter and remove the battery.
  Now, you will have to wait a while 1 hour should be sufficient, but you can leave the laptop disconnected for a longer time (all night long)

  After that, you must connect the battery and AC adapter and should try to light the device if it will not help you then you are in trouble
  This would mean that a serious hardware problem causing this problem and I doubt you could remedy without any help from the ASP.

• Portege M700 Wacom does not respond after hibernation

  I've been using the M700 for two months and I met a very annoying bug. It is not mentioned in this forum so far, but there are other reports on the Internet who mention this problem too. (http://forum.tabletpcreview.com/showthread.php?t=16902)

  * Question: *.

  Tablet is placed in hibernation. When he wakes up, everything seems OK. When you use the stylus or the key functions, that the cursor does not move. Tablet and pen services have not crushed, but there is no link between screen/digitizer and software.

  + Technical support +.
  The series/USB connector is not reset after waking or hibernation is dead the serial connection

  * I tried solutions *.
  So far, I have reinstalled Vista, tried XP (and will stick to it because it's a better OS in many cases) and have reinstalled all kinds of drivers Wacom.

  * What we want *.
  Wacom has also seems to be aware of the problem but says it's a matter of Toshiba. I am impressed with the construction and the quality of the M700 (it is a replacement for my robust but now almost unusable M200 and I have a M400 too, but I never liked it) and this issue is the only glitch I meet.
  I would like to know if anyone else in this forum has experienced a Wacom-coma after the resumption of the hibernation or standby, and if so, if they have found a solution (apart from restarting their PC)

  And I would really like a response from a representative of Toshiba review of this question.

  Hey Buddy

  I m not a M700 owner and, therefore, I can not say much about this issue, but to my knowledge, there are a few different problems with Vista and hibernation mode.
  For example, device high definition audio, screen WLan failed after the resumption of hibernation.
  These issues were definitely Vista problems.

  Installed on Portege M700 Tablet d River was developed by Wacom, I wonder why the guy States that it is a Toshiba issue?  :| (perhaps because this Toshiba laptop s ;)))

  Anyway, you said that you have reinstalled the driver for the tablet of the Toshiba page and updated the Vista of the State. Check the BIOS updated maybe he could improve the functionality

  If this does not work I recommend you contact the ASP to find out if there is a known issue

• Qosmio F10 lights After Hibernation

  My Qosmio F10 starts (after about 7 hours, without me touching any button) after putting in Hibernation mode during the night. The fact that for 4 days.
  Its quite annoying. Any ideas?

  Hello

  It's very strange question.
  Energy saver is responsible for the hibernation and standby.
  I recommend you to check the parameters. You can also try to change or reset the settings.
  In addition, you can try to reinstall the energy saver. Unfortunately, there is no general solution to this issue.
  Check it out.

• M70-160: don't wake up from hibernation or standby - hardware or software?

  I just maaaaaan!

  works fine, but will not wake up from hibernation or 5000mAh! unless you're going to wait a while! 15 min or something like that!
  After that he's going to wake up and work normally.

  I thought that it is overheating problem but now just turn it on and when the toshiba logo appear if you turn it off, it works again, but after 15 min it will BE!
  This isn't a problem of heating!

  She does this even without HD top!
  at first, it was the hibernation and standby problem, now it dose the same with stop!

  what I can do!

  I bought just the guys! ASP is now a way!
  is there anyway that I can do to fix this!
  I have difficulty PCs a lot, but not books!

  Hello

  You can also contact your local Distributor and check with him. They also have enough experience. On this path, it is not easy to tell exactly what is happening.

  Is the unit preloaded with recovery media or with your own operating system?

• unwanted restarts after sleep or standby extended shut down

  am running Windows XP Home 2002 with Service Pack 3; When I try in standby mode or Hibernate mode, the computer within 10-15 seconds auto restarts.  Is there a solution?

  Hello

  Thanks for posting the question on the Microsoft Community Forums.

  According to the description, it looks like that you are facing a problem with the standby or hibernate on the computer Windows XP.

  I suggest you to see the steps in the following Microsoft article and check.

  How to solve the problems of hibernation and standby in Windows XP: http://support.microsoft.com/kb/907477

  Note:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Hope this information helps.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• VPN access no longer works after upgrade from 10 IOS!  Any input to fix?

  VPN access no longer works after update IOS 10!  With the help of an iPhone 5 or 6, our employees use their hotspot phone to connect to our VPN.  Suddenly, he broke Monday after the upgrade to IOS 10.  We have experienced many versions of IOS, and it has always worked.  Any patch available?

  Hello howlindaug,
  Thank you for using communities of Apple Support.

  If I understand your message that your employees will no longer be able to connect to your virtual private network with their iPhone 5 or 6 after the upgrade to iOS 10. Sierra Mac OS and iOS 10 delete a VPN profile PPTP connections when a user upgrades from their device. If your VPN is a PPTP connection, you'll want to use one of the options listed in the section below:

  Prepare for removal of PPTP VPN before upgrade you to iOS 10 and macOS Sierra
  

  Alternatives for PPTP VPN connections

  Try one of these other VPN protocols for authentication by user that are safer:

  • L2TP/IPSec
  • IKEv2/IPSec
  • Cisco IPSec
  • VPN SSL clients on the App Store, such as those of AirWatch, Aruba, Check Point, Cisco, F5 Networks, MobileIron, NetMotion, Open VPN, Palo Alto Networks, Pulse Secure and SonicWall

  Best regards.

• Stor.E access point stops working after a few seconds

  Bought a Stor.E wireless adapter and followed the instructions but after turn on the unit by connecting to USB power usage provides cables, access point WIFI disconnects after 4 or around seconds.
  1. I connect to usb power
  2. the indicator flashes in green and stays on
  3. wireless light turns green and stay on, turns off after a few seconds

  Managed to connect using the mobile app several times, while its sequel, but given that the WIFI point disconnects, can't use it.

  Any thoughts?

  1. I connect to usb power

  Stor.e wireless adapter must be connected to the power supply and the other end to the external HARD drive.

  

  Then, you can use the application to access the wireless content.

• Satellite Pro L300 will not connect to Wifi after hibernation

  Hello

  can someone there help me please?
  I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

  The only way to do it is to restart the pc.

  Any suggestions?

  Hello!

  I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

  In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you run the factory settings or you have installed a different version of Windows?

  Good bye

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment