Accessibility for the control center features

Similar Questions

• After you import the metadata from an another env, no access to the Control Center Manager

  Hello
  I work with bise1, in this setup there are main ETL OWB features only;
  I imported metadata via design-> import metadata; These metadata were exported in a different environment;
  Once imported, all seem fine, I can make changes, the center of access control manager
  then I save and exit design center; When I connect back, I have more access to the Control Center Manager, the command is dimmed.
  I re-imported 5 times already, so I only got access to the Control Center Manager, why what is happening?
  anyone ever had something similar, or perhaps you could have the indication on what is the problem?
  Thanks in advance for any advice
  Rgds

  Hello

  may be trivial, but you opened the project in the Project Explorer tree. Before that, you cannot open the Control Center Manager because it is related to a project.

  Kind regards
  Carsten.

• Other ways to access to the control center

  I'm a quadriplegic and can't touch to the iPad, but I use the switch access. That leaves several things that I can't because you have to do some kind of shot or another action.

  I was trying to find another way to bring up the control center, since I can't slide with my finger. I actually found a several months ago and put in a recipe under switches, but something went past and disappeared and I don't remember what I did. Any ideas?

  Also, I need to be able to implement all applications running in the background that must be killed. I can't double click on the home button. It any suggestions?

  I use the command with 2 switches. If that helps anything.

  Thank you! -Doug

  Hello WDMaples,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to be able to access all the features of your iPad, and I have an article that should help you to implement the control you are looking for with your switch access. This article should help guide you through setting up the recipe to replicate hitting swipe and double click on the home button.

  Switch control: Basic Techniques

  If you experience any problems or have any questions, please let us know. The entire community is here to help.

  -Best regards-

• Static IP remote access for the media center

  I NMH410 work through a WRT610N router.   My ports are configured for static IP access.  Seems to just going through www.ciscomediahub.com does not work well for me.

  Can someone provide the 'exact' URL I would enter in order to access my media center?

  Documentation of assistance through Cisco shows: https://Wan_IP_Address but that doesn't seem to work.  The demand is just there and finally once outside.

  To everyone:

  Apparently, I discovered and corrected the problem that I had with 'Remote access' to my Media Hub.

  Somehow, there are two configurations of router that had to be done.  On two port forwarding configurations has been necessary and once allowed me to access the media center.

  It seems that my ISP has a 192.168.x.x address router that was different from the address of my router 192.168.x.x.  It is on the home router when I incoming and make changes to the information of port forwarding.  The fact that I was getting an error message indicating that I wasn't even reached my router alerted me to the fact that my ISP was blocking remote access.  In the end, that's where my problem was discovered.

  Translate:

  If you have problems to access your media "at a distance" pole through its IP address (and not by the cisco media center), make sure that you configure the ports of the router specified by your Internet provider address, as well as the ports of the router that you have on your network home.

  I have forwarded port 443 on the two addresses of router port, and I can now access my media hub remotely.  Now if I can't play videos remotely, I'll be set.  This leads to another problem that I'll send it in another thread.

  Thanks for the help and suggestions of each.

• Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

  after update to XP media center units Vista remote control

  Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

  Hi Nicolas,

  I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

  For more information, you can check the link below,

  http://www.PackardBell.com/index.html

• RTC-5260: unable to connect to the control center

  Hello gurus,
  
  I get an error when I try to deploy my paintings, maps and dimensions
  
  RTC-5260: unable to connect to the control center, check it please you provided correct host, user, password, and Service name.
  RTC-5301: the Service control centre is not currently available.
  
  To find the errors, I ran the service_doctor.sql file and got the following response
  
  SQL > @C:\OraHome_2\owb\rtp\sql\service_doctor.sql

  there are errors in one or more packages PL/SQL and functions

  of the platform properties have been loaded properly
  Location of the platform were seeded correctly
  NLS messages have been loaded correctly

  at the service of the platform is not available
  There is an access problem to the startup of the service of the database script

  Server

  here is the detailed error that contains the name of the start

  script file:-

  starting Service "C:\OraHome_1\owb\bin\win32\run_service.bat" file is

  not available from the server of database on the instance of number 1

  Please make sure that the disk containing the file is visible in the

  database server

  is it you Please check that the database server account has access rights the

  file

  there is a problem with the connection to the repository information used to

  start the service of information

  here is the detailed error that contains the connection

  to the service:-

  can't access the owner of the database password repository

  Server

  Please check that this information is accurate
  If this information is correct, then please use the

  'set_repository_password.sql' script to reset the password stored
  
  PL/SQL procedure successfully completed.
  
  Can someone help me find the solution
  
  Thanks and greetings
  Pratik Lacoste
  DBA Oracle Jr

  I want just to know more about it then you can tell me the reason for the error...

  For example look at this thread
  Error when you try to deploy a DBLINK mapping
  or search on Metalink owb ora-01882

  Kind regards
  Oleg

• Audio controls from the control center was lost in iOS10?

  Updated reluctantly iOS 10 and so far, the biggest annoyance is that my playback controls for some audio I play (audiobook of iBooks, podcasts with downcast, stream radio KPCC app) disappeared from the center of control... any way to recover?

  Quick scan power button or mute with the least amount of taps & shots is important when you want to respond to someone knocking on a door, or on the land line call, etc., and have hit to swipe several apps to reach the audio application when you were in another is an unnecessary extra step.

  Is there a way to get this back that I missed?

  In iOS 10, audio controls have been moved to a second page in the control center and are accessible by sliding left within the control center.

• iOS 10 remove airplay and release of the control center.

  The airplay and drop buttons occupy too much space in the control center. This space would be more useful if it were the music app. I do not have now any use of airtime or air drop and would really like to be able to hide these buttons.

  iOS 10

  bliss13 wrote:

  The airplay and drop buttons occupy too much space in the control center. This space would be more useful if it were the music app. I do not have now any use of airtime or air drop and would really like to be able to hide these buttons.

  iOS 10

  Why?

  In iOS 10 slide the left control center and you have control of everything for the Music Center.

• IOS10 - cannot get the control center by dragging to the top.  Nothing happens in any screen by sliding upwards

  I have an iphone 6. I've updated to ios10.  Everything seems to work fine except that I am unable to drag upward to get the control center.  What can I do to make this work?

  Hello

  The following steps may help:

  • Go to settings > Control Center:
    • Check that the options on the lock screen and access in applications are turned on.
  • Make sure you slide up from the bottom edge of the screen.
    • Control Center to use on your iPhone, iPad and iPod touch - Apple Support
  • Restart your iPhone:
    • Restart your iPhone, iPad or iPod touch - Apple Support
  • The steps detailed here can also help:
    • If the screen of your iPhone, iPad or iPod touch does not respond to the touch - Apple Support

• How can I delete Music player from the control center!

  Control Center (hit upward at the home screen) contains a music player control. I want this thing out of here. I rarely play music on my iPhone. And I find that thing handheld game. I find that I didn't ask to play music. And the music app does not appear when I double click the home button. Is the Controil Panel customizable? If so, how? Or what I have to live with this beca some UI designer at Apple thinks it's so cool, we have no choice.

  Stephen

  The control center is not configurable by the user. Submit your feature requests to Apple using this link:

  http://www.Apple.com/feedback

• Cannot deploy maps, just jobs hang in the control center

  Hi all
  
  I'm working on OWB 10g. For a long time, everything was normal. Still on a single instance I can't deploy any mappings. They are validated, generated and the deployment job starts (I can see it in the control center), but it never ends. It crashes right there with the green arrow as 'treatment' status and stay that way for hours.
  
  Does anyone have an idea what could be wrong?
  
  Thanks in advance

  If it is really hanging for hours without end, check stale OWB sessions and their locks.

  If it is finished after a long time, update the statistics on the repository.

  HTH
  Alex

• AirDrop does not appear in the control center on my phone.

  AirDrop does not appear in the control center on my phone. Is it possible to 'light' another way. I would use it but he's not here

  Check under restrictions. Settings > general > restrictions > make sure it is on sub "allow." Also make sure that the wifi and bluetooth are on. -AJ

• Node of devices for the control of 'ENUM '.

  Hello world

  I had some problems to understand the 'NumItem' property for the control to enum with property node.

  I am trying to use this property to control the iterations of a 'loop' For.

  Here is the related link: http://forums.ni.com/ni/board/message?board.id=170&message.id=400341&query.id=479803#M400341

  Thanks for jmcbee.

  

  the problem I have is that I did not find property 'NumItem' it, or I find some possible properties instead of him.

  I be gracious, if someone of you could give me an idea.

  PS: I'm using Labview 8.6.

  Thanks in advance,

  -Kunsheng

  "NumItem" is short for "number of items". Glance for this.

• Windows Mail error "this language is no longer available for the control of the sale.

  Original title: where is the dialog box options spelling?

  When I try to use the Windows Mail spelling checker, I get the message:

  This language is no longer available for the control of the sale.
  Please select another in the dialog box options spelling. \

  I use Explorer 7 with Windows Mail 6.0.6000.16386 Vista Home Premium

  Hello

  (1) if it works well before?

  (2) remember to make changes?

  This occurs if the default language is not defined in the spelling options. Follow these steps to resolve the problem:

  (a) start Windows Mail

  (b) from the main screen in Windows Mail, click the Tools menu and select Options...

  Note: In step (b), make sure that you select the Tools menu in the main window, not the new message window.

  (c) click on the spelling of the language drop-down menu tab, select English, even if it is already considered to be the default selection and click on apply.

  (d) click OK

• For Adobe Reader for iPad: for the Write Anywhere feature, how can I change the color from red to black?

  For the Write Anywhere feature, how can I change the color from red to black?

  Hi Jason,

  Open the PDF in Acrobat Reader

  By the low toolset select comment > Freehand

  After doing the drawing freehand click on save at the top right

  Then tap & hold on this drawing freehand in the PDF file and will get a contextual menu just above in the black bar.

  The menu options are: delete, thickness, color, opacity

  From there, you can change the color.

  Thank you

  Abhishek