Accommodation of the presence on the next information control VCS

Similar Questions

• The upgrade of control VCS v7.2.2 to 8.1

  Happy new year!

  I saw the 8.1 release notes

  "Before you upgrade to X 8 or later, if you use Agent TMS (legacy mode) for commissioning you must first migrate from Extension Cisco TelePresence Management Suite Provisioning"

  In our VCS, I have the alarm - "Configuration warning - VCS runs in a legacy of the Agent mode TMS;" It is recommended to switch your system to use another mode.

  I guess this VCS was used with an MSD, but now we do not have a.

  How can I get rid of this alarm and upgrade to 8.1 VCS?

  I found that this configuration is the config FindMe, but we have no option to FindMe key now and he is not active.

  I hope that I have explained the problem as clear as possible.

  Best regards

  Kiril

  You can do a factory reset after you be logged in as root, however, he will wipe away everything, including details of intellectual property.

  Your best option is to contact TAC, explain what you want to do and what has kept the data you need and ask them to arrange a re-flash to the system via USB key. (In your case, it seems that you can simply remove the key from the commissioning, however, you should also check that the details of external management have been erased.)

  Edit: See your last post it looks a lot like a factory reset is in order, it will recreate the image on the system and clean the database as well, but like I said above, contact TAC for a re-USB flash file.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Get the next Navigation control in the APEX

  How can I change the navigation of the registration file to use another clue outside the primary key? Under "Get Next or Previous primary key value ', APEX lists the Navigation order, and the secondary Navigation order.» I put here my secondary index value? I do not wish to use the primary key, which in my case is only a sequence number (SEQ_ID). I need to use the results of a series of data more closely one such Invoice_Number. Any suggestions?

  Hello
  I think there is a misunderstanding here. The primary key declared in the process of 'Get next or previous primary Key Value' is just used to get the line (in fact, it doesn't have to be a primary will be the keys, all unique). Real for "next" and "previous" navigation uses the column "Navigation order. So use your primary key to get the lines, set the order of Navigation to invoice_number, and if the lines need filtering, then use the "optional WHERE clause. For example, if you have linked to the line in a report, and then use the same WHERE clause as the report. Note that a form element has no connection to the result set of a report.

  I hope this helps.

  Best regards, Garry

• VCS-Express and the integration of control VCS

  Hello

  I have the following question on the integration between VCS and VCS Express behind NAT devices.

  Control of VCS in the configuration of the area customer I will use the (Real) Global IP address location > Peer Address or I have to use the private IP address.

  Thank you

  Hello

  It depends on the interface how you have connected on the highway. So if you have two connected interfaces then the internal one is configured with a private address, and that you would use on the control to send traffic to. But to your question, I assume you have a connected only interface so you can use the public ip address for sent traffic of venture capital control.

  Ask if you need more information.

  Best regards / / Andrey

• How can I update my credit card information to pay for the next tranche of creative cloud when it tells me that I have "Creative Cloud Free Membership" so without possibility to update a credit card - despite my payment for a slice of 1 year in January 20

  How can I update my credit card information to pay for the next tranche of creative cloud when the screen tells me that I have "Creative Cloud Free Membership" so without possibility to update a credit card - despite my payment for a slice of 1 year in January 2015?

  Hi kanikas100,

  Using my old Email to open a session allowed me to see my current subscription and I was able to update my credit card.   Thank you very much!

• Information about the next release of OBIEE?

  Hello world!
  
  Anyone know where I can find some details on the new features and changes in the next release of OBIEE planned for fall 09. I heard that there will be lots of updates and a new module dashboard. I would like to know more can someone send a link.
  
  Thank you!
  
  -Joe

  You saw [this thread | http://forums.oracle.com/forums/thread.jspa?messageID=3241776�]?

• What is the next meeting?

  What is the next meeting?

  We are working on the following 8 December at the headquarters of data Tech still to accommodation. Jim and I have worked on the presenters/authors. You should see more information soon. But save the date for the evening of December 8.

  Thank you

  Gabby

• Apple music unexpectedly goes to the next song!

  Greetings!

  • I can play my own music bought from iTunes. No problem at all.
  • When I try to play any song/music list Apple it skip to the next song. And the next. With a second delay. Apple music is currently unusable.

  I used the Apple music with no problems for about 6 months.

  Latest version of iTunes (12.4.3.1) and OS X (10.11.6) installed on a Mac Pro.

  Any thoughts?

  Hello Wognum,

  Thank you for using communities Support from Apple!

  It is my understanding that when Apple's music using it continuously jumps to the next song, without playing one of them.  I'll try my best to help with this.

  The first thing I would do, it's what is on the backup computer.  Nothing that I will propose should result in no data loss, but it's always a good idea to have a backup.  Your computer has software called Time Machine.  It is a fantastic software for backing up your computer.  Information on how to use Time Machine is available here:

  Use Time Machine to back up or restore your Mac.

  Assuming all other internet access works correctly, it is important to try to isolate what is causing this to happen.  The first thing to do to help isolate what is causing the problem is set up a test user account and see if Apple music works properly there.  Follow all the instructions that you will find on this page:

  How to test a question in another account on your Mac.

  If the problem does not occur in the test user account, then you will want to check the connection points of the account where Apple music will not play.  Try to remove the elements of connection and see if it plays properly.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon!

• Why is the bar blackened and address grayed out instead of display the url information?

  -Recently installed Linux Mint 17.1 "Rebecca."
  -Delivery address does not appear when the text typed in the address bar
  -Green, grey and black colors appear instead, as if blocking the view information

  Could you check this thread started by another user of Linux and see if workaround it helps you on your system:

  How can I stop firefox ffrom blocking URLS

  There is a workaround:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste gfx and make a pause so that the list is filtered

  (3) double-click the preference gfx.xrender.enabled to change its value from true to false

  It takes effect after the next time you exit and restart Firefox.

  It works for you?

• My playlists on apple music continues to repeat the first progress song and custom to the next song

  My playlists on apple music continues to repeat the first progress song and custom to the next song

  Hi, tabby1008!

  Thanks a lot for the use of Community Support from Apple! After reading your post, I understand that when you listen to music from Apple, one song keeps repeating instead of skip to the next track, when it finishes. I wouldn't listen to the same song over and over again when Apple's music catalog is so big, so I'm happy to help you!

  First of all, check that the "repeat" feature is not enabled. The following article gives some information about the feature 'repeat' and what to look for.

  Use of music music Apple in the app

  The "Shuffle and repeat your music" section provides this information:

  Shuffle or repeat your music

  Press on at the bottom of the playback screen to mix songs in a playlist or album. Alternatively, you can ask Siri to scramble your music.

  Type once to play entire playlist or album looped or twice to repeat a song.

  When activated, the icon for a repetition will be "BOLD". If this is the case, type just the icon to activate the recurrence at the wide. The next page of this article will show you where these buttons:

  

  If the repeat function is turned off, try closing the music app using the steps described in the article below.

  Force a nearby application on your iPhone, iPad or iPod touch

  Once the music app is closed, press the icon to open it again and then try to play your songs. If one is always repeat, restart the device. Instructions on the way can be found in the following article.

  Restart your iPhone, iPad or iPod touch

  Good listening!

• Publish to Webdav still fails to connect, probably because the connection information is never requested.

  Try to publish the Thunderbird calendar to the Webdav server by following the instructions Help article https://support.mozilla.org/en-US/kb/exporting-and-sharing-a-calendar but I have never asked for the connection information. The publication fails with the error "the calendar has no publication. Status code: 405: method not allowed. "I can use other Webdav software enabled on this server ok. Can anyone suggest what the problem?

  Bonoky,
  As I mentioned in my last reply, I think the key is that you must have a calendar on your server program, if the publication function can communicate with it.
  I recommend to ask you this question 'high' to the next level if you want additional help.

  - duggabe
  

• New FF 32.0.2 break from one day to the next. Full disclosure - Cookie Clicker

  I use FF for many things, often many tabs, etc. I picked up clicker cookie a month or two ago. I always left CC running from one day to the next day without any problem until FF update to version 32.0.2 and now I'm back in the morning to find that it is broken down.

  More recent reports of incidents:

  BP-977c17bd-f1fe-4A8A-98e3-773682140919 19/09/14 07:21
  BP-256c08cf-0725-4200-bA1a-fe2b62140918 18/09/14 07:55

  I use very little add on, same theme, that I had for many years, nothing has changed other than the version of FF I know.

  Any help is appreciated!

  Full Disclaimer: Yes, I know that the perils of the performance of my computer all night. Since I always did before upgrading the version of FF, I fear that this time with which these accidents started after this upgrade. Thank you!!!

  Next steps that I took:

  1 recorded progress, tab reloaded.
  2. right click on the page and go to "display information page.
  2.a. Under support, scrolls to find ads (usually flash .swf) and blocked images from these sites.
  2.b. 1 - 2A to repeat several times
  2.c. According to the news page-> permissions, blocked Adobe Flash for just this site.

  The performance so far is upward. We'll see how he holds up the night.

• I made three new folders and put bookmarks in them. the next time I open bookmarks, none of these works was saved / fact. What happened to my new folders?

  I have created folders and put a number of bookmarks. the next time I went to Favorites, none of my work was saved, I was back as it was before, nothing does not get lost, but has nothing. Why my files not be saved?

  Hello

  Firefox automatically creates backups of your bookmarks, which can be useful if your bookmarks are lost or missing. To retrieve them, follow the instructions below.

  1. Use one of the following methods to open the bookmarks library window:
     • Firefox 29 and above: Click the Bookmarks button

       

       then select show all bookmarks.

     • Previous versions of Firefox: Click the Firefox button and click on bookmarks. (If you do not have a Firefox button, click on the Bookmarks button

       

       or the menu of bookmarks and select show all bookmarks.)

  2. At the top of the library window, click on import and backup , and then select restore.
  3. Click on the date of the backup of bookmarks you want to recover.
  4. In the new window that appears, click OK.
  5. Your bookmarks in the selected date should now be restored.

  For more information, see the article restore bookmarks from a backup or move them to another computer . For alternatives, see the article of recover lost or missing bookmarks .

  This solve your problems? Please report to us!

  Thank you.

• I tried several times to set up an email account with Thunderbird, but the next time I start the computer and start Thunderbird, no account is displayed.

  I bought a new desktop PC with Win 8.1 and installed Firefox and Thunderbird.
  Then, I tried to set up the e-mail account manually (in IMAP) following the instructions here: https://support-en.upc-cablecom.ch/app/answers/detail/a_id/22 , but can't set the mail server outgoing smtp correctly (I could receive mail but not send them). Subsequently, I deleted this account. Then, I started the automatic mail with UPC Cablecom under the http://www.upc-cablecom.ch/content/dam/www-upc-cablecom-ch/Support/executables/upc-cablecom-email-assistant.exe link tool and he did successfully set up the account, however, because a POP3 server account. As I was not happy with it, I deleted the server of incoming POP3 mail (and lost the e-mails received, of course...) and retried a manual installation. In doing so, I got an e-mail account IMAP incoming more two outgoing SMTP server (comparing them, I also understand the configuration error that I had done the first time). I then deleted the manual as SMTP server the automatically the installation server worked correctly.
  In this context, accepting them and sending E-mail worked OK. However, the next time I started the computer, the e-mail account disappeared and Thunderbird was asked to set up a new account again. I have successfully set up manually once more, but the same problem resurfaced at the next startup, the e-mail account was gone...!

  Thank you in advance for your help!
  Maxonce

  Verify which profile is used.

  AppMenu button - help - troubleshooting - profile directory - Open Directory information

  Your profile folder should open in Windows Explorer. What is the location of the profile?

  Restart your computer and repeat the steps above. The profile folder has changed?

• Can I receive update notifications without constant nags if I chose to wait for the next update?

  I had a lot of problems over the years with updates of mozilla. I would like to be informed of updates, find out what security changes have been made and decide for my self if they interest me. I can not get a choice of "do not upgrade" and be left alone until the next update?

  Sorry, I did not see a mailing list registration notification by e-mail page an imminent update. Here's the quick release for 2014 calendar - to bookmark!
  
  https://wiki.Mozilla.org/RapidRelease/calendar
  
  Another 8 weeks between Firefox 26 and 27, the new versions are released every 6 weeks since Firefox 7.0.