account control will not be installed bdb57ff2-79b9-4205-9447-f5fe85f37312

Similar Questions

• Bridge will not be installed, it goes to 42%, there is a quick flash of the word 'pending' and a few stays there, not to finish the download.

  Bridge will not be installed, it goes to 42%, there is a quick flash of the word 'pending' and a few stays there, not to finish the download. Help please, thank you!

  Evan, please let us know the OS and the version of the bridge you are trying to download, follow below mentioned steps.

  • Restart the computer.
  • Delete the files in the temp folder.

  Win: C:\Users\[Username]\AppData\Local\Temp GOLD folder in the address bar.

  Mac: / tmp

  • Try to have total control over the directory temp (authorization).
  • Try to create a new Admin account and try to install it.

  Kindly share the result after trying these steps.

  Atul_Saini

• This update that kb2729450 will not be installed on my machine.

  This update that kb2729450 will not be installed on my machine. I am running Windows XP SP3. .NET framework 1.1 of .NET Framework 2.0 SP2 .NET Framework 3.0 SP2 and .NET Framework 3.5 SP1 are also responsible... Why the many versions?

  The yellow security shield appears in the status bar. I click on the shield and the Update window opens. I select the "quick installation" and the installation of the update begins. After a few minutes, the message 'Done '. Here's where she spreads all other "Updates" I ran this machine. In the "Done" window, there is only an option button "close"... No button "restart the computer". I click on the "Close" button, the window collapses and the yellow shield disappears... for about 5 minutes, when he reappears! I check the 'Add Remove Programs' in Control Panel, and I don't see that kb2729450 listed. I've "installed" 5 - 6 times, always with the same result. I was struck with this ransomware FBI 4-5 months ago and it was professionally removed. Since I was very nervous when this machine burps.  Also, since the Microsoft Community page, I ran Kaspersky anti-rootkit.  He has reported no problems with this machine

  Nope, different from the machine, although I think I solved it.  I "restored" to a point three weeks ago.  After that 'Restore' finished, I have rebooted and within minutes the yellow shield pops up... I installed every 5 or 6 that this KB.  After installation, he went through his screen to normal closing with the radio button 'restart now '.  After the reboot, I checked the area add / remove in the control panel and Voila.  They and KB2729450 are all here.  The machine seems to work very well and also faster than its ever been.

• Unable to use wireless internet. In addition, my windows update will not be installed.

  Original title: extended error code = Oxfof4

  I have a couple of different symptoms. My laptop acts like it doesn't even have wireless capabilities although the exact model the same sitting next to her was a strong wireless signal (I still had internet capability on this laptop also). In addition, my windows update will not be installed.  I checked "Event Viewer" in system tools and have all sorts of errors. Error service Control Manager, "Warning b57w2k", code error Windows Update Agent and more. Still, the laptop doesn't move and accesses files, but no internet. I scanned with AVG and Malwarebytes 0 infection. Uugh!  Any suggestions?

  Many laptops have a switch that turns on or off the wireless radio.  This can be a physical switch somewhere on the laptop or a combination of the Fn key and one of the F keys.  Read the user manual for the laptop for more details.

  The warning includes "b57w2k" seems to be linked to a Broadcom NetXtreme 57xx Gigabit Controller (not wireless, wired).  You can click the copy (just below the up/down arrows) on the property sheet for the event and paste the content in your next post here.

  In general, the report that you have 'all kinds of errors' in Event Viewer is not very useful.  We do not understand what you're watching.

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Fix - It says no problem, updates the load but will not be installed. Error 'WindowsUpdate_0000057A' "Windows update_dt000".

  Fix there work and corrected updates, but updates the load upwards and will not be installed. Error 'WindowsUpdate0000057A' 'Windows update_dt000' on control spent installs almost all office 2003, Excel, Word etc failed sine 5/12 2012.

  See if this helps: http://support.microsoft.com/kb/906602

• I bought lightroom 6 at amazon, but it will not be installed. All I said "Installer failed to initialize, please download Adobe install advisor to detect the problem", but it does not exist. It gives me no more information than that. I have already

  I bought lightroom 6 at amazon, but it will not be installed. All I said "Installer failed to initialize, please download Adobe install advisor to detect the problem", but it does not exist. It gives me no more information than that. I already had a free annual subscription to cc through my new canon camera, but I installed for my mac already. No phone number to call, adobe contact to say amazon, what do I do?

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Cloud creation will not completely install on the new computer.

  Creative cloud will not completely install on my new computer (Mac).  Can someone help me?  I've logged into my account and want to bring my creative cloud subscription programs.

  You must first install the Creative Cloud Desktop App and use it to install the applications. (see the link below to install)

  The links below can help. If you get a specific error, please let us know the details as well as the operating system you are using and what you are trying to install.

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  FAQ: How to launch creative Cloud Apps

  FAQ: What should I do if I have trouble to download or install the creative cloud and Creative Cloud Apps?

• error "itunes has an invalid signature, it will not be installed."

  Hi everyone, I get 'itunes has an invalid signature, it will not be installed' error when Apple Software Updater is downloaded and installed iTunes 12.4.1. Although my iTunes itself indicates the version of curren (12.1.3) is the latest version, software update tries to update and gives this error. What to do to correct this error and install the latest update?

  Thank you

  Are you sure that you run Windows 10 as stated in your slogan?  What is Win XP?

  iTunes version 12.1.3.6 is the most recent version running on Windows XP.  Above you need to Windows 7 or a later version.

• Feedly Extension will not be installed. Solutions?

  Apparently, some are not having problems with the extension installation (see the dates of the examinations on the sheet), but I am. It installed perfectly on Firefox 21 before (more problems with it later if). In FF 22 is no longer installed now.

  What happens is whatever the method (i.e. install directly from the page of the add ons or extension console built into FF) the extension is not installed. I have download the extension, he invites me to restart. I do it, only to come back to the inability to locate even the button for the extension. It is listed as installed in my overview of the extensions, BUT I can always click on the button install Feedly extension page (https://addons.mozilla.org/en-us/firefox/addon/feedly/). Subsequently it "installs" again, but with the same problem as before.

  I even went back to 21 FF to see if it would work again, but it was nothing not done, now I'm really confused.

  No matter how many times I try (complete uninstall / reinstalling FF did not help) the right extension will not be installed. Is - fixable?

  Version 14 works for me
  https://addons.Mozilla.org/en-us/Firefox/addon/feedly/versions/?page=1#version-14.0.482

• Firefox Sync does not recognize my version of Firefox, will not be installed

  Whenever I try to install Firefox Sync, it tells me "You are currently using Firefox 3.0.13," will not be installed and suggested that I update. However, I use Firefox 3.6.10, so I don't know how to solve this problem. (Yes I tried to download and install the upgrade... it is always the result.) Any ideas?

  Your UserAgent is probably messed up by something you have installed.
  
  https://support.Mozilla.com/en-us/KB/websites+or+add-ons+incorrectly+report+incompatible+browser

• App downloaded but will not be installed 'paused '.

  App (OS X El Capitan) downloaded, but will not be installed 'paused '.

  From the Store menu, please select

  Search the unfinished downloads...

• I downloaded the OSX captain, but it will not be installed.

  I downloaded the OSX captain, but will not be installed. I have several times are entered in app store and keep clicking on 'Download' and it does nothing. Any thoughts?

  Make sure that your Mac can run El Capitan > OS X El Capitan - technical specifications

  If your Mac meets the requirements, reboot your Mac and try again.

• Autonomous SmartPrint for IE 9 will not be installed. Yes, I downloaded the new version.

  He complains that I have insufficient privileges.  There is only ONE user on this computer and I AM the admin.  So it will not be installed. It is said to connect with admin rights.  There is only one user, so there is no signature in a different way.  I can't even go into properties and change to "run as Administrator" depending on whether the box is grayed out.

  Help, please.

  Windows 7 64 bit

  THAT IS TO SAY 9

  -------------------------------------------------------------------
  It Professional with 30 years of experience
  Windows 7 Professional 64 bit
  THAT IS TO SAY 9

  I ended up HPSPSetup.msi running as a task manager of Windows taskbar and check "create this task with administrator privileges" and installed.

  1 CTRL/ALT/DEL and then "new task" button on the applications tab

  2. Enter the path to HPSPSetup.msi

  3. check "create this task with administrator privileges.

  4. click on OK

  It will install.

• XP - update KB979906 will not be installed

  SP 1 Security Update for Windows 2000 and XP - KB979906 - will NOT be installed. Automatic Instyall keeps trying to install it and it fails. After a few minutes, the automatic installer appears and try to automatically install it again - and again, it fails. I tried to go to Microsoft Updates and install via this method, but it also fails.

  Any ideas as to what is happening here and how I can fix this problem? Obviously if it is to be installed, I have installed it, but if it is not then how to remove this irritation?

  Thank you.

  Any info is greatly appreciated!

  MK

  Hi MasterKhan,

  -You receive an error message during the installation of the update?

  Please note when you install the security update 979906 on a computer that does not have Microsoft .NET Framework 1.1 SP1 installed, the installation of the update fails. Access the link below for more information on the installation of security update 979906.

  http://support.Microsoft.com/kb/2197103/

  Method 1

  Access the link below and download the stand-alone version of Microsoft .NET Framework 1.1 SP1 and install it and check if you can install the update.

  http://www.Microsoft.com/downloads/details.aspx?FamilyID=a8f5654f-088e-40b2-bbdb-a83353618b38&displaylang=en

  Method 2

  If you can not install .NET Framework 1.1 SP1 and update KB 979906, access the link below and follow the steps described in the article and try to uninstall all versions of the .NET Framework on the computer, and then reinstall all the versions of the .NET Framework on the computer.

  http://support.Microsoft.com/kb/923100

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.