Account seems disappeared after changing the MX record

Hi, tried to mail.mailroute.net to Setup MX for spam filtering to my Adobe Catalyst account, but now impossible to find or connect to my e-mail account to Adobe Catalyst. Tried to change the MX back record once again, but still can not account for work. Looks like I have no account in the e-mail settings, but I don't want to add the old one back if it replaces the one I... Very odd behavior that change a MX record may produce loss of contact with those mail account. How can I get the account back up work quickly? Also, the account was rather full - buy more storage? Account [email protected]

Thank you!

It turns out you're screwed, if you change a DNS record without warning and they have no backups of what either. Adobe Business revelation would be a better name for their service...

Tags: Business Catalyst

Similar Questions

  • I can't unlock my account hotmail even after changing the password

    E-mail address is removed from the privacy *.

    This account is the most I have
    He is blocked for some reason any and I can't unlock again
    I did some steps to change my password, but I get the error message, and I repeat the same steps for ever.
    but still it is blocked
    It comes to my blocked mail: * e-mail address is removed from the privacy *.
    Please help me ASAP
    Please

    After all the Hotmail issues in the appropriate forum found here:
    http://windowslivehelp.com/

  • Icons disappeared after changing the wallpaper

    original title: so I change my wallpaper and after that, all my icons on it disappear, but everything else works perfectly fine, a little help please? Its a Windows XP. Thank you!

    The icons disappeared just after I changed my desktop wallpaper. Is someone can you please tell me how I can return icons because that time, my office is empty! My computer is a Windows XP. Thanks in advance for answers!

    Hello

    Please follow the steps below.

    Method 1:

    Follow the steps from the link below.

    http://support.Microsoft.com/kb/330170

    Method 2:

    Run the Microsoft fixit from the link below.

    http://support.Microsoft.com/mats/system_maintenance_for_windows/

    Method 3:

    I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  • LiveCycle ES4. I am trying to move a picture online with a text box to create a header.  I had to create a subform that flows to generate multiple pages of text.  After changing the settings, it seems that I can't place images and text where

    LiveCycle ES4. I am trying to move a picture online with a text box to create a header.  I had to create a subform that flows to generate multiple pages of text.  After changing the settings, it seems that I can't place the images and the text I would like.  I tried moving them to the bottom, but does not work.  Is there a way to encapsulate the images so that they can be places as much as I want?

    Select your photo and text inside the subform flowed. Right-click and select wrap in subform do the positioned Subform subform. This will allow you to move objects in this subform positioned the way you like them.

  • After changing the port (1521 to 1525 in listener.ora and tnsnames.ora) OEM: the database is down

    Hello

    I'm installing Oracle Database 11 g 2 (11.2.0.4) on Oracle Linux 7.1.

    In short, what I'm trying to do now is changing the default port of 1521 to 1525.

    So I stopped the listener (lsnrctl stop) and then changed my listener.ora and tnsnames.ora:

    Listener.ora

    listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

    # Generated by Oracle configuration tools.

    LISTENER =

    (DESCRIPTION_LIST =

    (DESCRIPTION =

    (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

    )

    (DESCRIPTION =

    (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))

    )

    )

    ADR_BASE_LISTENER = / u01/app/oracle

    tnsnames.ora

    tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

    # Generated by Oracle configuration tools.

    BI =

    (DESCRIPTION =

    (ADDRESS_LIST =

    (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))

    )

    (CONNECT_DATA =

    (SERVER = DEDICATED)

    (SERVICE_NAME = bi)

    )

    )

    And then changed the local_listener:

    SQL > ALTER SYSTEM SET LOCAL_LISTENER = "(ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1525))";

    SQL > ALTER the REGISTRY SYSTEM;

    Finally, I started the listener (lsnrctl start) again.

    Then I tried to connect using Oracle SQL Developer to the customer. The port of 1525 works perfectly well.

    The problem is, when I open the OEM (Oracle Enterprise Manager), it says: "the database is down. Please specify the credentials of the host to access the restart and database diagnostic tools," which is like this: http://imgur.com/oKLPW65

    So I logged on the account of the host, and it shows that the database instance, listener and the agent is all down like this: http://imgur.com/Bzr84bz

    It seems that the port used by the OEM is always 1521.

    What should I do? Can someone help me solve the problem?

    Thanks in advance.

    UPDATE:

    After changing the emoms.properties & the targets.xml (thanks to Elisabeth), you will need to reconfigure dbconsole using emca.

    So what I'm doing is decreasing the config:

    $ emca - deconfig dbcontrol db-rest drop

    and then create again:

    $ emca - create config dbcontrol db-rest

    Voila.

    Best regards

    Jerry Antonius

    Hello

    Try to change the port numbers in the following files

    Don't port no 1521 to 1525

    $ORACLE_HOME /_SID/sysman/config/emoms.properties

    oracle.sysman.eml.mntr.emdRepPort = 1525 (before 1521)

    $ORACLE_HOME /_SID/sysman/emd/targets.xml

    (Before 1521)

    (Before 1521)

  • HARD does not work after changing the disk partitions recovery media creator

    Hello world

    After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

    Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
    I got in the OEM recovery partition.
    I am also able to create a recovery using the Windows tool unit.
    You have no idea about it?

    Thank you very much!

    Hello

    Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

    Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

    Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

    I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

    If you have any other questions you are welcome.

  • Office Jet 6500 will not print after changing the ink cartridges

    Office Jet 6500 will not print after changing the ink cartridges

    Hello

    This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.

    Please see here: http://www8.hp.com/us/en/support-drivers.html

  • Speakers stopped working after changing the device sound card

    * Original title: switched to hi-speed of dial-up, speakers stopped working / / rev. #2 Can I change the title of: speakers stopped working after changing the device sound card

    I have a Motorola SM56 speakerphone modem, I went from dial-up to the Road Runner.   When I open Device Manager and expand the sound column it lists "High definition Audio Device" (manufacturer of Microsoft), there are 4 that say "NVIDIA High Definition Audio" then there is one that says "Unimodem Half-Duplex Audio Device.  When I open the properties of the Unimodem device it says ' device working properly. "

    Let me start at the top under "General".  It lists the name of the device: Unimodem half-duplex Audio device.    Device type: audio, video and game controllers;    Manufacturer: Microsoft;    Location: Motorola SM56 Speakerphone modem.

    My speakers worked very well before I went.   I tried updating the driver but he came back with "best driver already installed.  It is a desktop PC, it is about 6 years old, but has been revised, graphics card new, updated to power, new 4 GB ram I think.  The hard drive is 1 TB.   I'm running Windows 7 Pro.  I forgot to mention, if I open a WMV file and volume in the taskbar commands, I see the green light moving.  The green light on the actual speakers turned on, just no sound.  It seems to me that the old speakers do not like the new modem from Time Warner. (I'm an old lady, what the devil I know)

    It is a question of another driver, or is it something else?

    Any help would be greatly appreciated.

    Are plug you the speakers into the modem?

    They must be connected in making your computer speaker, usually a light green color (read the manual of the machine). Go to control panel / sounds / playback and make sure that the type of speakers you selected as the default device.
    Audio device drivers updated its better to not use MS Update (it is not). Re-post giving your machine make name and exact model number (for example HP, Inspiron, ABC1234 etc.).
    See you soon,.
    Jerry
  • After changing the MagSafe adapter, macbook pro takes too long to start the video

    After changing the map of 85 W MagSafe, time to start the computer has become excessive (2 minutes). The screen lights up immediately, but the video appears after 2 Min.

    Once started, the performance of the computer are OK.

    This anomaly occurs after the change of the adapter, it's never happened before.

    Try a SMC reset:

    https://support.Apple.com/en-us/HT201295

    Ciao.

  • Satellite 4080 Xcdt, small image after changing the resolution to 800 x 600

    Hello.
    After changing the resolution to 800 x 600 or less (while playing an older game BACK), the screen is reduced to the size of the postcard.
    Someone at - it an idea to solve this problem, (another driver display or s.th.)?

    Greetings, r.

    Hi Ralf,.

    In my view, there is a setting in the BIOS to force the screen image to stretch to fit the available space.

    Kind regards

  • After changing the administrator password in windows server 2003, I can not connect the next day why?

    After changing the password in windows server 2003, when the new password take effect?

    Hello

    In dealing with the problem with Windows Server 2003, it would be preferable to send the same in the Technet community. http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

    Hope the information is useful.

  • Photosmart 6520: 6520 Photosmart printer stopped printing black after changing the print cartridge

    There was a similar position two years ago. After changing the cartiridge (564XL) black printing, the printer will not copy documents. He behaves as if I placed a blank sheet of paper on the glass. I can scan the document and print the .jpeg, but not the document. The print quality of everything else is mediocre - very light on blacks, even though the colors are fine. I ran through all the diagnostic tests and he told me that the printer is fine, although the black box on the diagnostic page is empty. The difference between my printer and the one in the previous post, it's mine is 18 months and longer warranty. It has been little used. In the previous post, none of the solutions have been proposed, but apparently HP has replaced the printer. Any suggestions, or is this device intended for scrap?

    Try youtube videos here.

    https://www.YouTube.com/results?search_query=Photosmart+6520+print+head

    Looking to learn more.  If no joy, your printer is toast.

  • error printhead after changing the printhead in L7680

    I have an OfficeJet Pro L7680 that is a few years old.  Recently, I have noticed a decline in the print quality for mainly black, but also a little yellow, and after changing the black cartridge with no changes, I decided to change the Black/Yellow Printhead.  So, I thought that if I'm trying to change a print head, I should change the other (cyan/magenta).  I bought new Office Depot print heads.  After replacing the print heads that I was able to print a page or two, and then all of a sudden the printer started saying there is a problem with the cyan/magenta printhead.  I tried to remove and reinstall, the suppression and power reset and then put it back up, etc, but nothing moves it.  I have not yet called HP, but I hope that when I do they will help because the print heads are under warranty until 2014, even if the printer is out of warranty.  In the meantime, I thought I would ask here is - it possible I only have a print head of DOA?  Or would it be the printer?  Unfortunately I threw the old printheads immediately (stupid me) so I can't try that goes back to the old magent/cyan print head and see what happens.

    Hello jmmarton.

    Your chip printheads were damaged by inserting wrong while the transport is always on the right side. This document provides instructions on how to replace the printhead to the unit.

    Use the link below to find how to contact HP phone support in your country.

    http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

    See you soon!

  • HP laserjet p1006: does not print after changing the toner

    I just changed the toner. The green light is on, but when something I send to the printer to print, the orange error light. Before inserting the toner, I pulled the Strip in transparent plastic attached to an orange tongue and the black cloth. I tried to reinsert the toner and turn on/off the printer again. Help please if you can. Thank you!

    Hi @cindycb,

    Welcome to the Forums of HP Support! I read your post and to see that when you try to print after changing the toner, the Attention light. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    Make sure all the orange, packaging material is to remove the toner.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

    Open and close the cover five times quickly. It should print a page with black lines on it.

    You can find the flashing light distribution in this document and the right solutions for the reason that you are experiencing, lights blinking on HP LaserJet P1005, P1006, P1007, P1008 and P1009 Printer Series.

    You use Genuine HP Toner?

    Please let me know the result and if there is anything else I can help you. Thank you.

  • HP2840 which has just started to squeek terribly after changing the drum.

    Can anyone help to maintain the HP2840 all in one color laserjet

    The squeeking started after changing the second image drum

    thketer,

    Self-satisfied, you got what it takes .

    Good luck!

Maybe you are looking for