Accounts domain after installation user and loading programs

Similar Questions

• Locking down system and now get error 'Could not load the profile user and loading of temporary user account' when you try to open a session

  When my computer is on suddenly power went and my system also closed that crashed without logging my user account. now, I started my computer and I tried to open a session in my account (having only one user account) but he goes to the temporary login account, it displays "could not load the profile user and loading of temporary user account if you make changes to this user account it will be erased when you connect after." What can I do? How can I solve it? I use windows xp.

  Original title: Temp user login

  Hi indhru,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Try the step after the connection to the temporary account below.

  1. Click on the Start menu.
  2. Type Regedit in the Run dialog box, and then press enter
  3. Access
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  4. There is 1 line for each profile. Especially if a profile is bad there are 3 things worth visiting:
  • Make sure that the name of the key are not ends in ".bad".
  • Make sure the RefCount value is 0
  • Ensure that the status value is 0

• System supports boot time and load programs.

  Original title: Explorer 7

  I recently installed explore 7 6.  everything seems to work ok, but it takes a lot of time for my system to boot and load programs.  Any suggestions?

  Hi larryleto,

  Method 1:

  You can try running the fixit tool that will correct the problem of system performance.

  Run thefix tool from the link provided below:

  Difficulty of Windows system performance slow computer problems

  It will be useful. Please let us know to get help.

  Method 2: Safe Mode

  Step 1:

  Try to start your system inSafe Mode and check if the problem persists.

  In Windows XP safe mode

  Step 2:

  If the problem does not persist in Mode without failure, you can tryclean boot.

  To run starting in minimal mode follow the steps in the article below:

  Perform the clean boot in Windows XP

  Note: After completing the clean boot troubleshooting steps return the computer to normal startup by selecting the normal startup option.

  It will be useful. Please let us know to get help.

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I make my Introduction_mc automatically disappear after 10 seconds and load Home_mc?

  Hello

  How can I make my Introduction_mc automatically disappear after 10 seconds and load Home_mc (automatically)? I don't want the user to change this introductory page by itself. It should be done automatically.

  What is the procedure and the code to achieve this, please?

  Thank you.

  Hello

  I gues you use AS2.0, then use setInterval, AS3.0 user class Timer.

  AS2.0

  var interval: Number = setInterval (doubts, 10000); in milliseconds

  function doubts (): Void {}
  do something;
  }

  AS3.0

  var: timer = new Timer (10000: 1);

  timer.addEventListener (TimerEvent.TIMER_COMPLETE, onTimerCompleteHandler, false, 0, true)

  function onTimerCompleteHandler(event:TimerEvent):void {}
  do something;
  }

  For more information: http://blogs.adobe.com/pdehaan/2006/07/using_the_timer_class_in_actio.html

  Best regards
  Etienne Das
  http://deepanjandas.WordPress.com

• Update of security continues to show the shield yellow in the system tray after installation twice and restarted (KB972270 & KB982132)

  Update of security continues to display the shield yellow in the system tray after installation twice and restarted (KB972270 & KB982132).

  YES, thank you! I had installed the most recent Fixit! Just ran disable it Fixit, rebooted, ran the update again and YAY no more yellow shield! Thank you!

  Then, less than a minute later, you posted...

  Thank you, this "fixed"! Ran the Fixit to disable, then ran update again and the yellow shield has not disappeared.

  That one I'm supposed to believe?

• How do I renew my student account teacher after switching schools and then leave the account expires because of the inability, resulting to check?

  How do I renew my student account teacher after switching schools and then leave the account expires because of the inability, resulting to check?

  You will probably need to get approved again if the post for which you have been approved initially is no longer applicable.

  For more information about the provisions of the student/teacher, you can refer to the following information page:

  http://helpx.Adobe.com/x-productkb/policy-pricing/Education-FAQ.html#main_submit_poe

  Another good resource for information is the student and teacher edition information forum:

  http://forums.Adobe.com/community/download_install_setup/student_and_teacher_edition_infor mation_? view = discussions

• Impossible to access or connect to PIA after installation peoplebooks and configuration

  Hi guys,.
  I have PT8.49 installed with oracle 10.2 on windows 2003.after install peoplebooks and configuration of configuration of the Web profile that I can't access or login to PIA. His display of connection appearing in the screenshot. I even recreated the PIA for this problem. But still, this is not fixed. I did the installation of the Server DB, Web and app on a single machine. The PIA has been configured as a single domain. Pls insist on what to do?
  
  Published by: 807208 on January 12, 2011 14:35

  The Web server runs? What URL are you using to access PeopleSoft?

  The screenshot is not attached by the way.

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to install xp after installation disc and erased hard disk is not available?

  My windows xp system was not working, I erased the hard drive! Now I have a computer that does not work!

  To develop what Daavee wrote, please explain, step by step, exactly what you were doing in your attempt to "recovery" of the computer and include a description of the "recovery disk" - that is, made the "recovery disk" you have used come with the computer or do you have it created when you bought the computer first?

  In addition, please explain what happened when you run the recovery disc - in other words, have you seen all messages concerning the formatting of the disc; on the Windows installation: or error messages (please, report them to the better you remember).

  "When you say the computer" will not work "-what happens when you turn it on (after removing all CD/DVD drive)?  Report the full text of the error message.

• Lightroom CC (2015) not launch after installation removed and re installed and re boot nothing!

  Lightroom CC 2015 was installed today via creative cloud but no program open, removed and re installed still nothing. Did a reboot and still nothing. Creative cloud, explains that it is installed.

  Windows 7

  I thank the of for any help!

  Kent

  Please log out sign of Creative Cloud App in the back. Then try to launch

  Sign in, sign out | Creative office cloud app

• Error when creating domain after Installation of OSB OS: linux 64-bit

  Hello
  
  Operating system is Linux 64 bit... Oracle 11g... Could you please suggest what Miss me in the creation of Installation of OSB or domain?
  
  < - > Configuration Wizard of fusion Middleware
  
  Selection of the model request:
  -------------------------------
  
  
  
  Available models
  | ___Basic WebLogic Server Domain - 10.3.3.0 [wlserver_10.3] x
  | ___Oracle BPM Suite - 11.1.1.0 [Oracle_SOA1] [2]
  | ___Oracle SOA Suite - 11.1.1.0 [Oracle_SOA1] x [3]
  | ___Oracle service Extension - 11.1.1.3 GOSA Bus [Oracle_OSB1] [4]
  | ___Oracle Enterprise Manager - 11.1.1.0 [oracle_common] [5]
  | ___Oracle extension of Service Bus - topology of server unique domain - 11.1.1.3 [Oracle_OSB1] [6]
  | ___Oracle extension of Bus Service - all Topologies domain - 11.1.1.3 [Oracle_OSB1] [7]
  | ___WebLogic advanced Web Services for JAX - RPC - 10.3.3.0 Extension [wlserver_10.3] [8]
  | ___Oracle activity monitoring - 11.1.1.0 [Oracle_SOA1] [9]
  | WSM Policy Manager - 11.1.1.0 ___Oracle [oracle_common] [10] x
  | ___Oracle JRF WebServices asynchronous services - 11.1.1.0 [oracle_common] [11]
  | ___Oracle JRF - 11.1.1.0 [oracle_common] [12] x
  | ___WebLogic advanced Web Services for JAX - WS - 10.3.3.0 Extension [wlserver_10.3] [13]
  
  
  * CFGFWK-64040: the model you have selected cannot be applied because the
  * following dependencies have not been met:
  * Unresolved golds:
  * OR Oracle service Bus GOSA Extension: 11.1.1.3
  * [/ opt/oracle/Middleware/Oracle_OSB1/common/models/applications/wlsb]
  * _owsm.jar] <-xml fragment
  * xmlns:fo = "http://www.w3.org/1999/XSL/Format" >
  * < dom: requires a name = "Oracle Service Bus Extension - any field."
  * Topologies"version ="11.1.1.3"located at the same place = 'true '.
  * xmlns:dom = "http://xmlns.oracle.com/weblogic/domain-template" / >
  * < dom: requires a name = "Oracle Service Bus Extension - Single".
  * The server domain topology"version ="11.1.1.3"located at the same place = 'true '.
  * xmlns:dom = "http://xmlns.oracle.com/weblogic/domain-template" / >
  * < / xml fragment >
  
  
  Thank you
  Sushma

  Usually, when you choose Server - Oracle Service Bus Extension for example single domain topology - 11.1.1.3 [Oracle_OSB1], dependencies are selected automatically as well.

  If this is not the case, simply add the products that it is seems to indicate the error, such as Oracle Service Bus GOSA Extension - 11.1.1.3 [Oracle_OSB1].

• onscreen help extended after installation an old PC program!

  I installed 'hooks on phonics' program on my pad think T7700.  The program is 4-5 years. The program works on the thinkpad computer but the rest of the screen on the computer everything is enlarged.  I uninstalled the program, but always following return to the original display of small size. All solutions?

  Try to go into the display properties, an increase in the maximum setting screen resolution.

• vCenter server join to the domain after installation

  Hello

  I have a windows 2003 with sql Server 2005 in the WORKING Group on this server, I installed virtual center 2.5 now I want to migrate to vcenter 4, but first I have to join to the domain.

  Can perform the join to the domain of this server without problem?

  Thank you

  Fabio Storni

  Yes it should be no problem to joing your Windows 2003 virtual machine to the domain - this will not affect your VC server.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• It not install on Win7 Home - don't say no admin tho I'm only user and admin profile

  Running Acer laptop Win7 Home Edition, Avira Antivirus, Windows Firewall. Mozilla's Firefox downloaded installer stub. On running it, it reads "extract" and then displays a message saying "some facilities may not work Installationavecuneracine current user" and shows two options: run with the current user and administrator (to be completed only for the administrator password).

  Click the current user and the program disappears - nothing happens. There is only 1 profil_utilisateur on this system - user current, called 'a' with privileges and no password. Click on administrator insists on the password, will not accept the empty password field and disappears.

  I created an ID of administrator with the password and logged, but the same two options new pop up - and the disappearance even once program is selected.

  Tried with Avira and disabled Firewall. Makes no difference. Running Firefox earlier version with the active user profile and no problem. When the upgrade program itself, this problem started while I have to use IE or Chrome.

  I'm typing this from my desktop system where Firefox works fine.

  OK, your sub windows 7 when you downloaded the file to go to her and right up until it clicks. On this list, there is an option "Run as Administrator".
  Click it and proceed with the installation.
  This is what may be the problem as Windows 7 has problems with UAC.

• Win 7 Pro - make a name of user and password request when accessing to the server computer in the workgroup. Credentials, then considered non valid.

  Recently bought a Dell Dimension 3847 with Windows 7 Pro to replace a workstation that is connected to a network that uses Windows Server 2003. I already set up two other PC's (not same model) with Win 7 Pro, for existing users and had no problems whatsoever. The user of this workstation is an existing one (implemented as an administrator).  I've set up his account and she joined the working group. The other computers in the workgroup are listed under network location. However, when I tried to access the server computer in the Working Group, I got a pop-up window asking for a username and password. This would not have taken place. However, I entered the username and password for that particular user and received a message that the user name and password were not valid. I set up my user account (it has administrative privileges too), on this computer, joined the Working Group, Windows recognizes the other computers in the workgroup, but when I tried to access the server computer I got the same pop-up and had the same problem with my credentials not being recognized. While remaining under my user name, I tried and then access the server computer again but when I arrived at the prompt for the user name and password, I used the 'Administrator' user name with the appropriate password (the credentials used to connect to the server computer) and it worked. I registered to the account of the other user and used the same method to access the server and it worked as well. Any ideas why the user credentials, other than the administrator account, are not recognized?

  Hello

  Sorry for the late reply.

  This problem is better suited in the TechNet forum where we have experts working on the same topic.

  Please post your request in the below link:

  https://social.technet.Microsoft.com/forums/en-us/home

  I hope this information helps, get back to us if you need help with Windows.

  Thank you.