Accounts of users not listed is not on the login screen

Similar Questions

• Mouse and keyboard not working only not to the login screen

  Hi, I was recently infected with Antispyware Soft virus. In my attempt to remove it, my screen went black, so I had to restart my computer. Entering my login screen, I was unable to connect because my keyboard and mouse no longer works. I tried to start the safe mode too and they still do not work on the login screen. However, they work at the start of the BIOS. I looked around, but I couldn't find any option for Legacy USB drivers. I went to a few USB option and select [Enabled] and it still doesn't work to the login screen. I have no PS2 port, so I can't try it. I was also able to use my mouse and keyboard when you attempt a repair of the system to do a system restore, but that solves nothing. I am at a loss what to do. I hope someone is late, as I'll be gone tomorrow/more day late today. I am writing a computer laptop and unable to remember any care my office except the fact, it's Windows Vista.

  Hi HellMuT1,

   
  We recommend to use a different mouse and keyboard, then check the result. If the problem persists, try the following steps.
  1. Insert Windows Vista DVD.
  2. restart your computer.
  3. let the computer restart (boot) from the DVD.
  4. If you are prompted, press a key to continue.
  5. When you reach the screen install Windows, select your preferences in the language to install, time and currency format and keyboard or input method boxes, and then click Next.
  6. do not click on install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
  7. make sure that the appropriate operating system is selected, and then click Next.
  8. After you click Next, the System Recovery Options menu appears.
  9. click on command prompt.
  10. type devmgmt.msc and press enter
  11. on the window Device Manager, in the object list, expand mice and other pointing devices.
  12. make a right click the sub element and click on uninstall.
  13 expand keyboards.
  14. make a right click the sub element and click on uninstall.
  15. Type exit and press ENTER to restart the computer.
  16. remove Vista DVD and restart the computer to see if the keyboard and mouse works fine.
   
  Do the repairs to the system of Windows recovery environment
  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keyboard & mouse not working not not at the login screen.

  I have Windows7 64 bit installed on my machine. I can't use my keyboard and USB mouse to the login screen. I tried to boot the system in safe mode, but I am facing the same problem here. When the login screen if poster my keyboard freezes and if I press num lock does nothing. My mouse stops on the login screen. I don't want to reinstall windows as it will scan all the settings I have on my machine. Is it possible to solve the problem without having to re - install windows. I tried to fix the problem using my installation disc, but I couldn't find the solution.

  Hi Philippe,.

  I suggest you to disable and re-enable the USB controller and check if it helps.
  
  Use Device Manager to disable and re-enable all the USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.
   
  To disable and re-enable the USB controllers, follow these steps:
  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  b. expand Bus USB controllers.
  Note that you have to scroll down to find this point.
  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
  d. Repeat steps above for each controller USB is listed under Bus USB controllers.
  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  f. check the USB device to see if it works.
   
  Also, try updating the chipset drivers on the computer manufacturer site.
   
  Thank you.

• Windows does not load the login screen

  Hello. I'm running Windows 7 on my laptop and when I boot it will not go to the login screen. The screen turns black with only the cursor showing. I also want to add that my computer did the same thing when trying to enter in safe mode. I don't have a disc of resettlement. Please help I need to access important information.

  1 you need to borrow an installation disc or a system repair disc [32-bit if yours is 32-bit, 64-bit, one if yours is 64-bit].  There is nothing that you can do without one of them.  Buy an installation disc if necessary - see Amazon reinstallation discs and note that these are inexpensive because you pay only one disk not a license.

  2. start the computer from the disk borrowed or purchased.

  3. restart normally and the problem should be gone.  The problem could never happen again.  There are other details of this in a computer running that Windows 7 does not start when force you the computer to shut down.

  4 once you are up and running then consider the steps recommended in why is my screen black when I start Windows 7 to reduce the risk of a recurrence.

  5 you can also search this forum for a black cursor screen as there is a lot of discussion on this issue.

• How do you keep your Microsoft Account e-mail address is more displayed on the login screen of Windows 8?

  I do not have my e-mail address Microsoft Account displayed on the login screen of Windows 8, when I have my local account linked to my account from Microsoft. If I give a presentation I don't want viewers to see my e-mail address, and also for security reasons I would like to remove. Is it possible to do this? Thank you!

  You can't, it belongs to start cold initial process.

  However, you can stop the process of re - open a session after a period of inactivity or sleep by turning off the function of password via Power Options in Control Panel.

• Upgrade to OS El Capitan. Has been Keychain errors. Now incompatible with the very power not past the login screen. Try Apple cat and give up after spending more than 30 minutes, avoiding so to repeat myself (last I checked, I'm not a fool).

  Upgrade to OS El Capitan this morning on the laptop of my daughter because she saved his laptop school (apple) at what his cell phone the school had problems. Had to upgrade to the latest OS as its portable school was on the latest OS and its docs to school would not open on his personal laptop (she was on the Mavericks). Fallen on admin password so questions concerning with the cat and who sets obtained but by fixing what they then created many problems of Keychain. I was directed to a support document, which did nothing. I was told to finish the upgrade to El Capitan, and maybe that would fix issues Keychain - BAD! Now, it's a 50-50 chance that when I get to the sign in page - I'll either get arrested here with the keychain error pop ups or it will allow me to the desktop view. I'm beyond disgusted at this stage because what should have been simple has become a living nightmare.

  I checked through the archives and found a lot of Keychain, but nothing seems to fix mine.

  I get the following:

  * talagent wants to use Keychain 'local products '.

  my admin and my signon password do not work

  so I press Cancel, then I get

  * Messages Agent wants to use Keychain 'local products '.

  my admin password and access code does not work

  so I press Cancel, then I get

  * CommCenter wants to use Keychain 'local products '.

  my admin password and access code does not work

  If I press Cancel, then comes continuous pop-up error message Agent

  Help, please

  Have you tried to reset the keychain:

  Reset your Mac OS X Keychain - Apple support

  See you soon,.

  GB

• How to make Windows 7 see the list of the user on the login screen, not just the last logged-on user

  I am running Windows 7 Professional 64 - bit and have two user accounts on my computer. Problem is that the login screen shows only the last logged user and one "other users" button which allows you to manually enter the username. Is it possible to return to the display of a list of all users instead?

  Jon

  OK... I found how to fix this problem. I know it's a few years since this topic (and most of the people moved to windows 8) but for those who are still Windows 7 who are tired to type the user name, whenever you log in, here is how to display the icons of the user:

  WARNING: This patch is not a hack. I do not use any third party software. I am simply change a security setting in the windows system. The longest part is to find the file. As much as I would like to say that this will fix all computers, I can't guarantee that this will be the solution for your system. This fixed my problem because my just setting should be disabled. That being said, let's move.

  As an admin (must be in an account that has administrator privileges) click the Start button and in the search at the bottom of the opening bar, the type of menu "Edit Group Policy" and press on enter. When the local Group Policy Editor window appears, click on the following arrows in the left column to expand the lists to find the file to change...

  > Computer configuration

  > Windows settings

  > Security settings

  > Local policies

  Security options<-Click on="" this="" file="" name="" or="" icon="" (the="" arrow="" icon="" won't="" do="">

  In the right menu appears a bunch of system settings, find the one that we called "Interactive logon: do not display last user name" This is the setting which will no doubt say "Enabled" beside him. Right-click on the file and select 'Properties', then disable the setting. Restart your computer and you should be good to go!

• is there anyway to remove it saying that parental controls have been turned on for a user account? is not defeat the purpose of putting them on in the first place?

  is there anyway to remove it saying that parental controls have been turned on for a user account? is not defeat the purpose of putting them on in the first place?

  is there anyway to remove it saying that parental controls have been turned on for a user account? is not defeat the purpose of putting them on in the first place?

  Hello

  Why she would frustrate the object?

  If the child is a Standard recommended account and you are using an administrator account, the standard account cannot change Parental controls.

  Concerning

• the user does not appear in the login screen (el capitan)

  I see a user in the control panel users & groups of system settings, but it does not appear in the login screen. How can I fix it? I did a reinstall of system and see that the data is always there the prior installation.

  In users and groups > Connection Options, is the verified user list?

  If you have FileVault active it cannot list users until you type the Admin password for decrtpt disk.

• I want to see the login screen, not the Welcome screen

  I have win 7 pro computers of a domain.  Suddenly, when I connect to tp computers laboratory after Ctrl/alt/del, I come to a screen with the last 'user' and an another icon named "other users".  This means that I have to select "other user", then I get to the screen that I feel like that was last entered user name, with the cursor in the password to enter the area.  He has also "change user" in the center of the page.  This is the page I want all machines to open up after Ctrl/alt/delete.  I tried various suggested 'fixed' and nothing solves my problem.  Why this extra screen is presented on some of my computers?

  To clarify: I think I understand, this is the "home screen" provides a list of accounts on the computer. To connect you with one of these accounts, I click on the account and type a password (if necessary).   The "logon screen" requires users to type a login name, and not by selecting an account from a list of available accounts.  After Ctrl/alt/delete, I want to see the 'connection' screen.

  I tried this fix (on the strategy) and it did not work.

  You can configure whether the Welcome screen is used by the parameter always use classic logon in the group policy. To do this, you have the following options:

  • Enable the policy to use the login screen rather than on the Welcome screen.
  • Clear strategy to use the Welcome screen.
  • Use not configured to use the default configuration (the Welcome screen).

  Because of these computers to open up to the Welcome screen, need me more time to open the lab.  Help, please!

  Hello

  As you work on the domain environment. The question you have posted is better suited for the TechNet forums. I suggest you post the question on the link below:

  http://social.technet.Microsoft.com/forums/en-us/w8itprogeneral/thread/03763ebb-A216-42AD-B243-e8ef4be94b43

  I hope that helps!

• Vista will not go past the login screen.

  Recently, I added 2 user accounts for my children.  When I restarted windows would load the login screen, it would go no further.  I click on any of the newspaper in the icons or the icon close / restart and they apear highlighted, but nothing happens.  CTRl ALT DEL does not work either.  I've tired of loading in safe mode and may still not exceed this screen.  I tried restoring the sytem using F11 and select System Restore, and once again, I get to the login screen and will not move any further.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a disc, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Picture of user account plus-res for the login screen?

  I have an image ~ 530pixels the place I want to use as an image of user account. I've seen mention that windows dimensionnera the image up to 48 x 48, and that's very good for when the image is displayed small (i.e. the start menu). However, it seems that this image of 48 x 48 is be climbed back to the login screen because it displays the usual up-scaling artifacts. Is it possible to tell Windows, through the registry, use an plus-res image for user account image is displayed on the login screen?

  But my source image is certainly high enough res ~ 530 squares. I want windows to * not * is resize up to 128 x 128 for things like the start menu, but then resizing * that * image 128 x 128 to something bigger for the photo log. It would be great if I could just give a picture of 128 x 128 for the profile photo (or the user in mosaic as I see articles call them) and then provide a plus-res image to the login screen. Such an arrangement already exists to provide images for, say, the start menu take into account different parameters.

  I think that the icon on the start menu is only 48 x 48. I just changed to a 256 x 256 user image and it is was reduced to 128 x 128 screen connection, much smaller than that of the start menu. I didn't know myself, but I read somewhere that the logon image is reduced even more if you're not using passwords. A 128 x 128 image should not get resized to the logon screen, only reduced to the start menu.

  Sorry, no idea how to display a larger image.

• DW CS6 test server shows only the login screen of my site. Can't do under the hood live wiew. The pages I want to change/modify is visible only when I connect but I do not know how to reolve that.

  I'm trying to edit a CMS site to my needs and "open" pages is not serious, that is to say those that do not require the user to connect to. I can see and I can modify them according to my needs.

  The trickiest part is when I want to change/modify something inside. Then it wont let me. The only thing I see is the "Login" screen I can see the code and I can do what I need, but when I turn on 'Live wiew' is the log in page that greets me

  
  Tests of servers is correct because I can use it in my localhost

  Connection MySQL works as it should (Test OK)

  I guess that's something that has to do with permissions, but I don't know what.

  A CMS site, the page is usually filled with data that is stored in a database using a scripting language on the server side. Unfortunately, the Design mode only supports a static language like HTML, there is therefore no recovery information from the database.

  The only way out of your situation is to temporarily remove the permission to the user to the page that you are editing so that you do not to log-in each time. The problem is that you may forget to reactivate the authorization.

  What I always do is to open the site in a browser and verify the change in DW refreshing the page in the browser. In this way, you need to log-in once.

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V

• my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  Hello

  Follow the instructions here:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports