Accuracy of the Variables window

Similar Questions

• Captivate 6 crashes when you open the variable window

  Hello

  I must say that I get pretty bored with how buggy Captivate 6 turns out to be. It seems to hang a large part of the time (when you open a project or after publication) and publishes often with lots of red boxes instead of my images (even when my high quality setting). Nevertheless, I can work around this problem by emptying the cache, restart my computer etc but I can't seem to get around this last bug!

  For some reason, Captivate and keeps crashing when I try to open the variables window (via the menu at the top and through the window advanced actions). I tried emptying my cache and restarting my computer with no luck.

  I also captivate 5.5 installed, so I tried to open the window of variables in this field and it worked well, but once again, captivate 6 frozen when I went back to try again.

  Has anyone else had this problem before and there at - it a way to stop what is happening? I am running windows 7.

  Thanks in advance

  Rick

  Hi Rick,

  Try to recreate the 6 Captivate preferences. Then launch Captivate 6 as it is run as an administrator

  If the above suggestion does not work, then install 6 Captivate in a new admin account and test the bheavior of 6 Captivate.

  It may be useful

  Thanks and greetings

  VJ

• Captivate 5 v. freezes when I try to open the variable window

  Works on Windows 7, I need to change one of my variables. So I click on project-> Variables...

  Captvate freezes. Accepts no input whatsoever. It's as if the variable dialog box are hidden. I tried stop Captivate from the Task Manager, says TM program (Captivate) expects inpu and I shouldn't stop there. TM suggests that the switch of Captivate. Yes. Captivate displays his "this project has changed, do you want to save, exit without save changes or cancel". At least it answers. But I try to access the variable dialog box again will this time through the creation of a tip action and clicking the Variables button there. Same effect.

  I was running to two monitors, a laptop, the other a regular monitor. I changed my settings of the monitor to use only the computer laptop, thinking that perhaps Captivate (or Windows) throws the dependent variable dialog somehow. However, the gel will happen again.

  It's out of the blue. I don't have do or change anything, as far as I know that would cause this behavior.

  All this experience?

  Hello

  I'm sure that would happen, Yes.

  See you soon... Rick

• Captivate 7 - Variables window off the screen

  When you open the variable window, the window off the screen and I can't bring it back to one of my two monitors (double).  ESC comes to Captivate, but I can't seem to locate and drag the window to the return variables.  Any suggestions?

  I can't reconnect to a third-party monitor (which I used to have).

  I assume that you have already tried resetting the workspace, CP restarted and the system?

  Try to update preferences, using the Cleanpreferences file that corresponds to your operating system, and that you will find in the Utils to the CP installation folder subfolder. ATTENTION: you will lose any customization.

  Captivate 8.0.1 Install? Keep your customization! -Captivate Blog

• Variable window does not open

  Someone at - he never encountered this?

  One of my colleagues can not open its window of Captivate 5 Variables. When he tries, Captivate freezes everything simply. Same thing if access from the menu of Captivate or inside the window advanced Actions.

  Steve

  Goose bumps.

  There are also trials of Captivate installed 6.

  He just

  • Open 6 CP and the Variables window.
  • He closed
  • CP6 closed
  • CP5 open
  • The variable window succeeded

  Strange. Hope this helps someone else :-)

  Steve

• How to share a variable between the Mathscript Windows and a Mathscript node

  Hello

  I'm trying to share (just) a variable between the Mathscript Windows and a Mathscript node. I don't know why, but the use of the "global" Matlab function makes the mathscript node output formats change.

  I'm looking for a "Mathscript RT V9.0.1 module" as it may seem, there is. French technical support have some difficulty to find...

  Hi patrick33,.

  The code that you have attached should not report an error, so it seems that something has gone wrong with your installation of MathScript. My best guess is that it is the problem that is described in this knowledge base article. Your signature says that you use f3 patch, which is a good start. But the KB lists some other steps to take when you see errors about MathScript, impossible to compile. Can you try the procedure described in the article and let us know if that fixes the problem?

  Thank you

  jattas

  LabVIEW MathScript R & D

• Configuration variable not found during execution by a task scheduler of the SSIS package. Works fine locally from the command window.

  I run an ssis job that works fine locally on the server application, but when the runs along a task scheduler it receives variable not found even if the variable is defined at the level of the system. SSIS package relationship parent/child and must pass the variable that has a value of the location of the configuration file. We tried to set the variable in a script and local setting, but none seems to be recognized. Any help is appreciated. The environment variable is defined in the package configuration.

  Example of a variable below.

  SSIS_CONFIG = access/config filename path

  Two things: first, the feedback forum is to post your comments on the web site of Microsoft Answers, only not for advice on technical issues.  Secondly, you seem to try to fix a server problem, and none of these forums deal with server issues.  Server issues are covered in the Windows Server forums found here: http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

• Pass variable from ColdFusion to the JavaScript window

  Hello world

  I have a java script window that will open when the user clicks on the link, my problem is that how can I pass a ColdFusion variable to the window. I use ColdFusion 7 so I can't use cfwindow.what should I put on the place * ? I tried to put EntityId in the location javascript:poponload (EntityId);   and function poponload (EntityId), not ' t not work then please let me know if you know how to do this.

  My code:

  < SCRIPT language = "javascript" >

  function poponload()

  {

  Window.Open (' test.cfm? test = '* , "mywindow", "menubar = 1, resizable = 1, width = 350, height = 250');

  }

  < /script >

  < body >

  < cfform >

  < cfset EntityId = '#form. EntityId #" > /i want to spend EntityId to the javascript window "

  < / cfif >

  < a href = "javascript:poponload();" "> find ID < /a >

  < / cfform >

  < / body >

  Thank you, Rob - appropriateness to the subject, not you (or someone) know what I'm doing wrong with the code below? (the message in the "alert" box is #x #, if the function is not picking up the Coldfusion variable, x). Thanks in advance!

• Is there a way to permanently disable the improve the accuracy of the pointer in Windows 7?

  I want to disable the option to stop PERMANENT Enhance pointer precision. This means that I need a stop off in the registry or the equivalent. I'm NOT for the option in the option window mouse I'm looking for a more advanced method avoid as control programs and to turn on this feature.

  Hello

  The only method is to disable the option Enhance pointer precision; there is no setting to turn off the option permanently to.

  I suggest refer you to the procedure described below to disable the Enhance pointer precision option in Windows 7

   

  un) click start.

   

  b) Type Control Panel in the search bar to start and then press ENTER.

  c) option select material and audio in the control panel.

  d) in the same devices and printer section select mouse.

  e) in the window properties of mouse select the pointerOptions

  f) uncheck "Enhance pointer precision" and check if it solves the problem.

• HP - 50g RPN - how to increase the size of the variable icon in the command screen in the RPN

  Greetings.

  How can I increase the size of the icons 'F' keys for variables in the RPN command line window?

  My reason for this is to be able to see the full name of the variable.

  Thank you.

  Edit: Perhaps sizes of keys to function 'F' is what determines the size of the variable icon. Does this mean that it cannot be increased?

  If you press SHIFT RIGHT and then press the ARROW KEY down, you can see more than 5 characters that are currently displayed for the softkey text.

  a second solution to think abou... to help the CSE function and custom designed GROBs.

  (However, take into account the current size of the police... how small it really is possible and stay legible-

  You must take account of the resolution of the screen of 50 G... it's not a 'Tablet' hi-res-like display)

  See the example on page 20-4 of the 50G users guide.

  a copy of the user guide can be downloaded here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?ContentType=SupportManual & lang = to & CC = US & docIndexId = 64179 & TaskID = 120 & prodTypeId = 215348 & prodSeriesId = 3235173

  Here is the example used on page 20-4

  % HP: T (3) A (R) F (.);
  { {
  21 8 00000EF908FFF900FFF9B3FFF9A2FFF9A3FFF9A0FFF388FF GROB
  "hp"}}

  the list above on the battery... run

  MENU

  If you try to increase the amount of visible characters when running programs, you can use INFORMATION or an application like GUIPLUS located here:

  http://www.HPCalc.org/search.php?query=guiplus

• Look at the auto window

  CVI 2013 SP1.

  I added a few variables in the Watch window and each compilation of debug config, window spy himself is the stuffing with duplicates of this variable.  See attachment. As you can imagine, this project becomes slower and slower to debug.  And there is no "Select all" feature in the Watch window to remove them all.

  

  Hello ElectroLund,

  Would it be the same issue as in this post: http://forums.ni.com/t5/LabWindows-CVI/duplicate-watch/td-p/2893688 ?

  Constantin

• Hide the debug window

  Hello

  I create an addon based on an external DLL programmed in c inside the DLL I give the floor to DbgPrintf to print details about loading the DLL, internal behaviour, etc. That's why the window Debug to display and print these messages. This window, however, may be useful for some users, to experience the somewhat difficult to use. I want to hide this window somehow, and let the user decide whether to display the debug window or not.

  Is there a way to hide the LabVIEW debugging window, so it does not appear even if DbgPrint is called in C code?

  Thank you!

  You could manage to turn debugging on or off in your C code:

  If {(iDbg)

  print debug information...

  }

  iDbg could be either an argument passed to your function or a static variable that you can put into power with a dedicated function:

  public static int iDbg;

  Sub DebugEnable (int iEnable)

  {

  iDbg = iEnable;

  return;

  }

• How to get the full username by the user windows login name?

  Hello.

  I need determine the full username by the user Windows logon name. Where are many ways to determine the logon user name. For example application property node App.UserName or % variable %username% in cmd. But I found that one way to determine the full username by connected on behalf of the user - command net 'user' in cmd. This way is very slow and requires a huge code (I do get logged in user name, check if the connected local user or domain, create the command net 'user', find in output full username).

  Is there a simpler way without using cmd?

  PS, Full user name is displayed in the Windows logon screen and on the start menu and can be different from the name of the user.

  Here which may help: https://decibel.ni.com/content/docs/DOC-24358

• Is it possible to rename the variable loop for I?

  I do a lot of work with 2D arrays.  Sometimes, it would be useful when browsing the tables for one of the index named i and the other named j.  Is it possible to change the name of the variable increment other than what actually in another variable?

  Thnaks.

  Hummer1,

  As already said, there is no way to change the image of the final iteration.  However, you can add a description to the wire.  Click with the right button on the wire, then select "Description and Tip", type the name/description you want in the box.  Now you can move your mouse over the wire, and the description will appear in the context-sensitive Help window.  I hope this helps.

  Chris M

• 3097 memory failure allocating memory for the Variables

  Hello - have an old Lenovo tablet of 3 year with Windows XP. Its been performing very well. I get a message that appears randomly who says:

  3097 memory failure allocating memory for the Variables

  installedapp872 = StrSub (Apps, Start, stop-stop)

  WinBatch 32 2000

  WIL Version: 3.0cbv

  has ran a chdsk

  Reinstall the memory.

  Found nothing on Google about this message.

  I appreciate your help.

  Try R.clicking my computer, properties, advanced, performance, swap file,.

  Click Change button, with C: drive selected, the value to "let the system handle",

  2 X game, close, restart the pc.

  Also, try http://oca.microsoft.com/en/windiag.asp

  Download & run the test memory microsoft...