ACE [Flex 3 with AIR] Questions on the 4th Module

Similar Questions

• Reinstall a potential buyer with a question on the BONE

  I plan to buy an Envy 17 in the months to come and had a question about the OS reinstall. Envy allows to boot from a dvd using the method of 'hold down F8' Windows standard to enter the default windows recovery tools and install a clean OS? I intend absolutely wipe the OS preinstalled and starting from scratch in order to remove all the crapware and create my own recovery image using OEM Win 7 dvd I have. To do this, I need to be able to load the operating system without using any built-in recovery console. As a user of long-standing self built desktops, I don't need such tools as I've done it before on my old laptop and this desktop computer. Thanks for your help.

  Yes, the operating system license key is attached at the bottom of the laptop. Before you start the formatting of the hard disk, you can check the recovery options available on the laptop_either by pressing the F10 key to turn on or by starting from the set of the OS Recovery you can burn (recommended, btw). A lot of new portable HP have a minimal 'Install' option that formate and reinstall only the OS and drivers without all the extra stuff that is preloaded.

  http://support.HP.com/US-en/document/c01895783=

• Question about the common Modules on Satellite Pro A60

  HI - first post!

  Looks like it's a bit a 'common' (see what I did there;)... too bad..) fault - but what driver file has these "common modules"? There is nothing in the list for the A60 Pro Sat that says "common Modules".

  Can someone point me in the right direction? Or is it just a case that they've got to be in the order of some? Will I have to uninstall all then repeat? Can I ask more questions?

  Thank you very much in advance,
  Phill

  Hello Phil

  Common modules is a kind of base for the other Toshiba application designed tools and utilities, and it must be preinstalled in a first time. Is very important that the common modules is not available for each laptop model. Why is that I can't tell you.

  I checked Toshiba download page and I didn t find listed common modules for your device, but I found the instructions facilities document. If you want to install the operating system on your own please install things in the right order.

  If you have any other questions, please write again.

  Good bye

• Install HRCS9.0 with Linux question: run the script hrcs90ora.dms error

  People,

  Hello. I install HCM and Campus Solution 9.0 with Internet Architecture PT8.53/WebLogic11g/Tuxedo11g/OracleDataBase11g.

  My macine server is Oracle Linux 5.10 and Windows XP-based Client computer.

  In the Oracle database Linux 5.10 Server machine, what instance HRCS90 configuration, select Demo or system, the next step "select PeopleSoft Applications" has only a single element:

  (1) PeopleSoft HRCS Demo Database - US English.

  I select this option to run the Wizard "setup.sh" that alters the scripts 'createdb10.sql, utlspace.sql, hrcddl.sql, dbowner.sql, psroles.sql, psadmin.sql and connect.sql. Then I executed 7 SQL scripts > one by one in Linux. Then need to load Windows XP data in the Oracle Linux 5.10 DB HRCS90 instance.

  
  After you have installed the Windows of HCM and Campus Solution 9.0 version in Windows XP with PT8.53 and log in Data Mover, I create the hrcs90ora.dms script, there's a step like below:

  Select the PeopleSoft Application
  (1) PeopleSoft HRCS Database - US English
  (2) PeopleTools System Database - US English

  I select "PeopleSoft HRCS Database - English American". When run the hrcs90ora.dms script, the error message as below:

  
  Release of Data Mover: 8,53
  Database: HRCS90 (ENG)
  Input file: C:\PT8.53\data\hcengs.db (ENG)
  Import AAP_ETHNIC_PMPT
  Import AAP_ETHNIC_PMPT 0
  Update statistics for AAP_ETHNIC_PMPT
  The remaining records: 21003
  Import AAP_TBL
  Create Table AAP_TBL
  Import AAP_TBL 0
  Indices of real estate required for AAP_TBL
  -SQL error. Position of the error: return 66: 959 - ORA-00959: tablespace "PSINDEX" does not exist
  
  UNIQUE INDEX CREATE PS_AAP_TBL WE PS_AAP_TBL (ESTABID) TABLESPACE PSINDEX STORAGE (40000 INITIAL FOLLOWING 100000 MAXEXTENTS UNLIMITED PCTINCREASE 0) PCTFREE 10 PARALLEL NOLOGGING
  Error: Unable to process create for AAP_TBL statement
  Spaces SQL: 0 tables: triggers 1: index 0: 0 views: 0

  Unsuccessful end

  
  But when again, run the hrcs90ora.dms script, the error is a party for the current record and goes to the next record. I ran the scripts 10 times and get the following result:

  
  Release of Data Mover: 8,53
  Database: HRCS90 (ENG)
  Input file: C:\PT8.53\data\hcengs.db (ENG)
  Import AAP_ETHNIC_PMPT
  Import AAP_ETHNIC_PMPT 0
  Update statistics for AAP_ETHNIC_PMPT
  The remaining records: 21003
  Import AAP_TBL
  Import AAP_TBL 0
  Update statistics for AAP_TBL
  The remaining records: 21002
  Import AAP_TBL_LNG
  Import AAP_TBL_LNG 0
  Update statistics for AAP_TBL_LNG
  The remaining records: 21001
  Import AAP_YEAR
  Import AAP_YEAR 0
  Update statistics for AAP_YEAR
  The remaining records: 21000
  Import AAP_YEAR_GOALS
  Import AAP_YEAR_GOALS 0
  Update statistics for AAP_YEAR_GOALS
  The remaining records: 20999
  Import AAP_YEAR_JG_GLS
  Import AAP_YEAR_JG_GLS 0
  Update statistics for AAP_YEAR_JG_GLS
  The remaining records: 20998
  Import AAP_YEAR_JOBGRP
  Import AAP_YEAR_JOBGRP 0
  Update statistics for AAP_YEAR_JOBGRP
  The remaining records: 20997
  Import AA_COMPARE_JPN
  Import AA_COMPARE_JPN 0
  Update statistics for AA_COMPARE_JPN
  The remaining records: 20996
  Import AA_CONV_JPN_AET
  Import AA_CONV_JPN_AET 0
  Update statistics for AA_CONV_JPN_AET
  The remaining records: 20995
  Import AA_COST_RT_JPN
  Import AA_COST_RT_JPN 0
  Update statistics for AA_COST_RT_JPN
  The remaining records: 20994
  Import AA_CR_EFFDT_JPN
  Create Table AA_CR_EFFDT_JPN
  Import AA_CR_EFFDT_JPN 0
  Indices of real estate required for AA_CR_EFFDT_JPN
  -SQL error. Position of the error: return 103: 959 - ORA-00959: tablespace "PSINDEX" does not exist
  
  UNIQUE INDEX CREATE PS_AA_CR_EFFDT_JPN WE PS_AA_CR_EFFDT_JPN (EMPLID, EMPL_RCD, EFFDT DESC) TABLESPACE PSINDEX STORAGE (40000 INITIAL FOLLOWING 100000 MAXEXTENTS UNLIMITED PCTINCREASE 0) PCTFREE 10 PARALLEL NOLOGGING
  Error: Unable to process create for AA_CR_EFFDT_JPN statement
  Spaces SQL: 0 tables: triggers 1: index 0: 0 views: 0

  Unsuccessful end

  My questions are:

  First of all, means "PeopleSoft HRCS Demo Database" in Linux and "PeopleSoft HRCS database" in Windows causes the error above? How to solve the error above?

  Secondly, when I created PeopleTools 8,53 Database Instance PT853, I'm not running the 'ptddl.sql' script, which creates many storage areas. It causes the error above? I need to run "ptddl.sql" for example PT853?

  
  Thank you.

  Probably, you set the init parameter db_files too low. As I remember, it is recommended and default to 1024 1021 on the Peoplesoft database. This is a static setting, change the value and it will restart the database.

  Nicolas.

  Post edited by: Nicolas.Gasparotto

• Question about the common modules on my Tecra 8200

  I tried to install common modules on my tecra 8200 with windows xp family. When I restarted the pc, I had a checksum error. Time and date when changed. I got a lot of error messages. What can ido to fix this.

  Hello

  Checksum error is caused by the RTC battery and if a BIOS checksum error message persists, this may indicate that the RTC (CMOS) battery must be replaced. The CMOS battery can be replaced by the authorized service partner.

  It's certainly not caused by common modules. Other error messages have noticed?

• LoadLibrary failed with error 126 that the specified module could not be found

  Hello, I receive this error randomly when am using oracle sql developer, sometimes, it happens just after the start and sometimes after 5 minutes.

  the error closes the program

  Help, please

  Looking for "loadlibrary failed with the 126 java error" seems to indicate problems with OpenGL and some video drivers and/or environments with multiple monitors. Here are several discussions...

  https://NetBeans.org/bugzilla/show_bug.cgi?id=243153

  Error "LoadLibrary failed with error 126: the module could not - Microsoft Community.

  [SOLVED] Problem with Launcher Technic: load library failed with error 126 - Technic Launcher - Technic Forums

  Therefore, it seems that this issue is not specific to SQL Developer. The last discussion includes a video link in his last message saying that ".dll" is sought instead of "atioglxx.dll' on 32 - bit or systems 'atio6axx.dll' on 64 bit (in the C:\Windows\system32 folder) system, so a workaround is to copy one of those to".dll ".

• Order the questions in the FAQ module

  I'm trying to settle questions of FAQ Business Catalyst module.

  He puts them in alphabetical order by default so I have numbered the. But once he arrives at 10 he's obviously out of order.

  And the customer does not want to put a letter on the front. IE A, B, C

  Any ideas on how to achieve this?

  Thanks in advance.

  I just look at the "other Options" section of the FAQ and found "Weighting" option. This is the solution. The higher the number, the greater the weighting. So if you're not sure how much FAQ you'll start 99.

• First Appcrash with Kernelbase.dll in the defective module always the problem

  Hello world

  After the update drivers associated with (Matrox, NVidia) the problem and checking the material, the problem persists:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe first Pro.exe

  Application version: 5.0.3.0

  Application timestamp: 4ce382d1

  Fault Module name: KERNELBASE.dll

  Fault Module Version: 6.1.7601.17651

  Timestamp of Module error: 4e21213c

  Exception code: c0000005

  Exception offset: 000000000000cacd

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1043

  Additional information 1: 30ea

  More information 2: 30ea564650b9f04e24c8d0b10bbe1000

  Additional information 3 c: 895

  Additional information 4: 895c2477ff9dd3b158f6107ec9f936c4

  What makes in any case kernelbase.dll? It seems to fail clips HD special Matrox, but only when I play their first. It happens when I click on the first source window and then the timeline and then beginning of jogging or rub in the timeline panel. It is switching between source and first program that triggers the appcrash for sure.

  While first actually did when you switch from source the program monitor in the app itself? I noticed on my HDMI video monitor when switching as mentioned, the monitor loses the input signal and is to scan the image. So I guess that this passage is more complicated for the first as you might think.

  Any ideas yet? Nothing I tried really makes a difference. I start to panic a bit now.

  Specs: Windows 7 64-bit, THE Matrox MX02, NVidia Quadro 4000, 24GO RAM, 2.66 sixcore dual CPU, in sense reverse video and OS discs.

  Using the codec HD standard Matrox for first.

  Any help much appreciated.

  I'm sorry, I didn't notice the Quadro card in your initial post. The version that I gave you was for Geforce cards and the Quadro have a tree of different version. The Quadro version equivalent to the driver I meant 275.89. However, they have a Quadro version that is not yet out on their downloads page standard which has the equivalent properties on the latest Geforce. Download and install after you have uninstalled all the software/driver Quadro you currently have.

  http://www.nvidia.com/object/Quadro-Tesla-Win7-WinVista-64bit-285.58-WHQL-driver.html

  Make sure that you choose the custom installation and remove the Nvidia update installation list if it is there. Try and see if that helps. If this isn't the driver to try the 275.89.

  Eric

  ADK

• More questions about the Web Module of Lightroom CC

  Once the photos have been uploaded to the Web site, can photos be changed or removed (in another food webs, are changes in the LR images in the collections automatically changed in the uploaded images.

  You need to upload to the Web server by ftp again manually.

  There is no link between LR and the photos uploaded to a Web server by ftp.

• Questions about the web module LR CC

  (1) once you have a domain name, you also need a service to HOST the Web site

  (2) is it possible to insert a plugin "FotoMoto"?

  Can (3) web page that is generated by the Web in LR module, have sub-groups for the different categories of photos?

  (1) Yes. You'll need a plan to host your images and your web pages and service accommodation. I recommend Hostmonster

  (2) FotoMoto is supported by the legacy versions of plugins of web module provided by The Turning Gate. However...

  (3) it's more complex Lightroom will allow, so you can check in The Turning Gates new product called backlight. It works through the library as a publication service Module. It supports several albums and even additional pages. They plan to add a basket too who can take care of your needs FotoMoto.

• Satellite A60-672: Question on the memory expansion

  Hi, apologies for this new! I would like to increase the memory of my Satellite A60-672, where I can find what I need (including the number) etc.

  Hello

  Your device can handle with max 1280MB. The compatible modules are:

  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Good bye

• LaseJet M1212nf MFP "" name of the failed module: HPM1210GC. "» DLL.

  I have installed HP Laserjet M1212nf MFP on 3 differnet PC (win8/win7) and when I try to print the spooler service stops

  with erro "" name of the failed module: HPM1210GC. "» DLL.

  I did a check on the forum and found out that I have to use universal drivers.

  I can not find them. I can hardly even find HP drivers from the HP site.

  Any ideas where I can find the universal drivers?

  Thanks in advance

  Hi Dyktio,

  Looks like you may have a problem with the spooler service for printing on the operating system of the pc. HP has developed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity:

  HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  http://www.HP.com/go/tools

  I would like to know what are the errors you receive?

• How do I put the buttons instead of menu in the menu module

  Hi iam having a form with menu, instead of the menu module, I need to buttons... can someone help me

  They're askiing allows you to create a toolbar...

  You cannot create a toolbar in the mmb file.
  But you can create the toolbar in your fmb.s

  Create a canvas in your form and make the type as a horizontal toolbar.
  Set the window with your name in the main window
  Go to this Web and place small buttons (create a block no db to contain the buttons) on the canvas of the toolbar
  and write code to open the form in the WHEN BUTTON PRESSED.

  In a form, you create it and copy paste that canvas of the toolbar and the toolbar block other forms also...

• Basic question on the Flex SDK kit:

  I'm a noob and can not afford Flex Builder, so I downloaded the Flex SDK kit.  I have the Java runtime and my sys JAVAHOME variable value.  I ran the

  C:\Program Files\FlexSDK\samples\explorer\build.bat

  .. .and it ran for a few minutes (I assume with success since I saw not the word "error" appear anywhere in the command line window).

  Now - I don't know if Component Explorer had been there before in the original of the Flex SDK kit download (where all which I copied into a directory I made called "C:\Program Files\FlexSDK\", but he is now inside the directory "C:\Program Files\FlexSDK\samples\explorer\".)  I don't know whether or not my batch.bat running created this "Explorer.html".  T it?

  My next question.  When I opened this Explorer.html - I received the order to Flex files to view sample - I see nothing but gray.

  I don't know what to do, but this is compounded by the fact that I am new to all of this - I don't know what to expect or the other.

  Can anyone help point me in the right direction?  Thank you.

  It looks like a write permissions problem. The Program Files directory has restrictions more stringent than other directories and mxmlc fails silently write the swf file.

  Please, create a "FlexSDK" directory directly under C:\ or in your own user directory, expand your SDK it and try again.

• What is the yellow square with a question mark on the page OPTIONS of FireFox? Have a peak.

  There is a yellow square with a question mark on the FireFox OPTIONS / settings page.
  If the mouse enters it, it reacts like it is something to click, but no indication that it is.
  Is it supposed to be there and if so, why?
  He has a POINT of MARK BLACK inside the small SQUARE of YELLOW.
  Any help is appreciated.

  This is the help screen. Press the key.