Acer Aspire 5610Z Windows does not load... No recovery cd

Similar Questions

• Acer Aspire Wifi S3 does not

  WiFi an Acer Aspire S3 adapter does not work and he repeats to me "limited." It has always been a quick an easy solution to the day, the admin has forgotten their password and can not remember. They changed on a different computer, but the Acer could not know that because he had no wifi connectivity. No one can access the command prompt, or anything else that requires an admin password. The laptop is now useless and no one can reset or refresh it because you need the admin password to do so. There are no. ETHERNET SLOT anywhere on the computer.

  All solutions?

  In addition, Windows Update cannot update anything because there is no wireless connection. This is a serious problem...

  Help, please!

  There is only the locations of USB, HDMI and SD card on the laptop.

  Every time that you try to connect to the Admin, he says:

  "This computer is in offline mode. Connect, and then try again"or something like that.

  Hello

  Given that the admin has forgotten the old password and due to the unavailability of the network connection, the device is unable to synchronize the password. At this point of time you have get the device for a coverage area of network where you let the computer, the password synchronization or you must put in the old password to connect.

  See also, Cliff_NCliff_N responded on 7 December 2012 post

• Satellite A215 S6816 won't mode BIOS and Windows does not load

  Hello

  I'm helping a friend to determine what the problem could be on his laptop satellite A215 - S6816 Windows does not load on start up and it says "press F2 for Setup, press F12 for the boot device selection menu" but niether one of these options works no matter what I do.

  I tried them on start up but nothing happens. It will be not just to enter mode BIOS or the menu. It will say please wait or entering the menue, but yet again, nothing happens.
  What else can I try to enter the menu, either to get the system to get windows to load? This could be a motherboard problem? Hard drive problem?

  Thanks in advance.

  Hello

  If you are unable to access the BIOS, or to load the Windows operating system, and then a serious hardware problem is present.
  Eventually he s a motherboard related question that means it could be a faulty motherboard or just a small part of the motherboard as a ROM chip for example.
  I doubt this can be fixed without help the ASP.

  There is thus only one real solution. go to ASP. Guys must verify the simple parts to determine what part is affected.

  Good luck

• When I start my computer I saw a MSI logo and then the screen goes black and Windows does not load.

  original title: HELP ME PLEASE!

  (I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp.

  Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition,

  Take a look at this:

  http://randompastime.blogspot.com/2010/02/restoring-MSI-wind-U100-NetBook-to.html

  Hope this helps

  Post back if necessary

  __________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows does not load and displays a black screen when it is connected to the power supply

  Original title - Windows Vista running on my laptop Sony VAIO

  Trying to turn on my laptop using the built in battery nothing happens.  When the laptop is connected to the power supply and turned on Windows does not.  It shows something in the sense that it does not properly off.  It tries to load back to a system restore point before the last stop, but seems to fail again during this process.  All that is displayed is a black screen. Currently the power on light is on, the battery light is on, but the drive activity light is off.

  Yet once again, I switched on the laptop and finally the Startup Repair process is automatically called.  After the display of the bar to attempt repairs, the system has been repaired successfully.  As a result, the I ran my Norton anti-virus, followed by Windows Updatesoftware.

• Satellite P300-28th does not start - windows does not load

  I bought Toshiba P300 28th last week. I spent Vista business successfully in Windows XP Professional with provided Toshiba DVD. Update Windows with Windows Update. After 3 days, laptop turns off suddenly, and because Windows does not start, it in fact does not start.

  When I press the power button / stop, it turns on, shows "Toshiba Leading Innovation" logo image option and "2", "press 12...", and it hangs and stops.
  I tried pressing F2 and F12, nothing happened.

  I can not access the boot menu.

  I put the Toshiba Recovery CD, the hard drive does not work. Recovery disk does not start, despite earlier I remember put boot CD/DVD at the forefront in the Boot Options to Boot Menu.

  I checked everything, power cable, took the battery in and replace after 3 hours, tried to turn on the portable power, without battery cable. Did not help.

  Don't know what to do?

  Your help is very appreciated.

  Hello Fiona

  If you are unable to enter the BIOS (F2) at startup settings there must be some serious hardware problem.
  I recommend to contact your local dealer where you bought this laptop and ask for help, or you can contact Toshiba service provider directly.

  What you have tried to do is good but if laptop doesn t allow you to enter parameters of the BIOS something wrong here, and you need professional help.

• Windows does not load upward

  My laptop charge, allows to enter my user passsword then everything freezes, it does not load in normal or safe modes,

  I really need to take my registered work it. #

  any suggestions?

  Post edited by: Aaronpjohn02

  Remove the HARD drive and connect it to the PC and others as external one. I hope that you will have access to all the data there.
  Sorry, but if the laptop doesn't start in safe mode I see this as last option.

• Windows does not load on a Satellite A350 with 500 GB Seagate external HARD drive

  There is a problem with this laptop, A350-043 running Vista Edition Windows Home Premium 64 bit, part number: PSAL6C - 04S 015

  In other words: when it is connected to a 9NK2AL-510 SEAGATE 500 GB SATA DRIVE EXTERNAL USB (s/n: 5QG1YH1E) Windows will not load, it will up to and gel just before the green movement of the bar. If the USB cable is released and handed over in a second, Windows continues to load normally and all is well.

  Otherwise, the operating system will have up to 15 minutes to load. Looking in the BIOS features, there is no option to boot from USB available, so it can not be disabled. I have updated the BIOS of Toshiba to the latest version without any change in this issue.

  I tested and confirmed that the problem persists no matter what USB port is used.
  The external drive is fully functional, and there is no error or problems with it loading Windows. I reported this problem to Seagate so that Toshiba in the hope that a solution can be offered on this, but has not heard back on anything either yet.

  Do you mean that the laptop needs 15 minutes to load the Windows operating system, even if the external HARD disk is not connected?
  It sounds weird, and I doubt that this can be related to any software problem

  First of all, you should check the boot order in the BIOS the USB should be set at the last or last position.
  Second, you should check if the same problem persists even after a fresh install of the OS in some cases, that the start-up procedure could be affected due to the process software and installed background.

  But if the new installation of the operating system is not enough and if the issue persists then I guess a hardware problem (motherboard?) could be the reason for that and, therefore, a technician of the laptop must be contacted!

  That s in my opinion

• Satellite L300 - Windows does not load

  Laptop Toshiba Satellite L300
  I bought this laptop as a Christmas gift for my son. I don't have the chance to watch it until he caught it so I n t aware that I had to do the recovery disc. Now Windows will not load or repair.

  I have performance of PCs that told me that I needed to contact Toshiba to send me recovery disks. Toshiba confirmed this but will be closed until7/1/2009 and will charge £30 for send me recovery disks.

  Can anyone help me with any solution or if I have to wait then would be what someone knows how it is easy to load the recovery discs as I'm a novice

  Thank you

  Hello!

  You can also get this disc of recovery of an ASP (authorized service provider). Here you can find one:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good bye

• After you type in username, Windows does not load. I just get a black screen, but I can pull up the Task Manager.

  Windows will not load

  Start your computer in safe mode and try to system restore to return your system files and settings to an earlier point in time, and when it was working fine. Also search for viruses and other malware

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Try scanning using this program to ensure that the malware has been removed:

  http://www.Malwarebytes.org/MBAM.php

  Run the malware removal tool from Microsoft

  To run the malware removal tool, click Start - type MRT in the search box

  You should get this tool and its updates via Windows Update

  To download the visit of mrt

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

• How to restore factory settings when Windows does not load?

  I'm recovering from the laptop (Dell Inspiron N5010) friend who has been infected with a malware ransom (ICE Cyber Crime Center Backdoor.Win32.ZAccess.erds). I used the Kapersky rescue disc to remove the virus from the ransom but now Windows will not load and I suspect that the MBR has been affected.  At startup, the Dell logo appears and the window loading appears briefly, but then you have the 'blue screen of death' flashes and the cycle repeats.   The bsod error is:

  A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO AVOID DAMAGE

  ON YOUR COMPUTER

  IF THIS THE FIRST TIME YOU ' VE SEEN THIS STOP ERROR SCREE.

  RESTART YOUR COMPUTER. IF THIS SCREEN APPEARS AGAIN, FOLLOW

  THE FOLLOWING STEPS:

  CHECK FOR VIRUSES ON YOUR COMPUTER. REMOVE ANY NEWLY INSTALLED

  HARD DRIVES OR HARD DRIVE CONTROLLERS. CHECK THE HARD DRIVE

  TO MAKE SURE THAT IT IS CORRECTLY CONFIGURED AND COMPLETED.

  RUN CHKDISK /F TO CHECK FOR HARD DRIVE CORRUPTION, AND THEN RESTART YOUR COMPUTER.

  TECHNICAL INFORMATION

  STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)

  The F2 and F12 keys work, but the F8 key will not open the "Advanced Boot Options", so I can't to the "Restore Dell DataSafe and emergency Backup" or any other advanced option.  System Restore will not work either.

  I ran chkdsk and sfc hard disk (via the Kapersky Rescue disk) and neither solved the problem.  Then I copied its data on the hard drive.

  I would like to restore the laptop to factory settings (assuming that it would be better to reinstall Windows because the drivers Dell would be included already?).   There is a folder on the hard disk called "emergency" and contains a Backup*.exe file and several Backup*.dsb files.

  Is given this scenario, possible to restore to factory settings?  Or am I forced to reinstall Windows from scratch?

  What version of Windows?

  7b error message indicates the operation SATA (SATA Mode) setting got changed in the BIOS Setup or possibly the hard drive may be roasted.

  Restart, and then press F2 before Windows starts to load to open the BIOS Setup. Look for the option SATA or SATA Mode operation (models name it differently).  I don't see the BIOS screen options in the online manual, but the options for this parameter can be: RAID, AHCI or RAID Autodetect / ATA. Post back and we say exactly what options are available and how she got now.

  If you are in the BIOS Setup, also find the Boot Sequence option and make sure that the internal hard drive is ranked first on the list. If it is not first, move it to all first, save the changes and exit the installation program. See if it boots now.

  If you reinstall Windows by using a Windows Dell reinstall drive, you should not ask for the product key. It should install automatically by itself. HOWEVER, you will need to have the product keys for all the other apps that you want on this system, for example Microsoft Office, so make sure that you have the product keys and the floppies to install before you clean the hard drive.

• Acer aspire 7551g Touchpad does not work in Windows

  It does not work. Any help would be appreciated.

  Hello

  It would be better asked in the Forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ============================================================

  Hello

  Try the system restore before that happened:

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ---------------------------------------------------------------------------

  Check with the manufacturer support, documentation in line and/or forums (if any) in the system
  There are probably
  Shortcut keys that enable and disable the touchpad functions.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ------------------------

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

• Acer Aspire 5536 Webcam does not work with Windows Live Messenger

  My Acer Aspire 5536 laptop with built in Crystal Eye webcam does not work on Windows Live Messenger.  Open the application of webcam Crystal Eye went very well, taking pictures is fine, until I want to use it in a conversation on Messenger.  Is there something I can do?

  A quick response would be much appreciated.

  Hi Tom Hawx,.

  (1) if it works well before?

  (2) remember to make changes?

  (3) you get an error message?

  You can follow the steps mentioned in the article below to configure settings for audio\video Messenger.

  With the help of your LifeCam with Microsoft Live Messenger

  http://support.Microsoft.com/kb/921332

  (Article applies to deliver the LifeCam, works very well for the issue)

  If the problem persists always, for more expert on this issue, help post your query on Windows Live Forum.

  Windows Live Forum - http://windowslivehelp.com/

• Acer Aspire E1 471 does not start. "no boot device, insert the boot disk and press any key".

  Acer Aspire E1 471. 8 64-bit Windows.

  It does not seem to recognize any boot device.

  Already tried:

  -F2 for configuration of the bios F9 to restore the default settings, F10 to save and exit and restart.

  -boot from usb, dvd... the screen turns black after the screening.

  -forcing safe mode or windows recovery screen (System Restore, auto repair, cmd, etc) the screen goes black, too and after about 20 minutes. the blue screen with the unhappy face appears (pc must be restarted)

  Any suggestions?

  Hi FerminSampo,

  We will try to repair the startup entries, I suggest you follow these steps and try to solve the problem of Windows 8 start.

  a. starting from hirens CD.

  b. try these commands from the command prompt.

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  c. restart the computer and check if the problem persists.

• Acer Aspire One D270 does not turn on!

  Have an Acer Aspire One D270. I've had for about 4-5 months now. Today it suddenly has stopped and it won't turn on. I left for a few hours but nothing yet. I thought it was a battery problem but the charging light does not turn. I know for sure, it is not the charger. Please help me! Thanks in advance!

  [Moved from comments]

  Nevermind found the solution...                                                                                                              Follow the steps below. (Please be careful when you handle the electrical components of the computer such as batteries and power adapters)

  • Remove the battery and hold the power for a few seconds (drain any remaining power)
  • Turning on the computer without the battery with the AC adapter is plugged in.
  • Wait a few seconds and then reconnect the battery

  After a few tries the computer should start normally supported. The amber battery stops flashing and turns green when fully charged.