Acer Aspire 5733Z black screen

Similar Questions

• Acer aspire m1201 black screen

  When I start windows movies from my computer to a black screen, Ive tried the system restore, install drivers missing and non-functional. McAfee is all this so far with no problems detected. I can get on the computer by pressing f8, then go to low resolution screen and mode without failure, but not normally. It worked for a bit of roll back to a previous display adapter driver, but eventually it stopped working. I can't find anything wrong with it and uninstalled programs that we no longer use. The computer worked fine until we turned on after a weekend away! In addition, it is just out of its warranty. I went to back to factory settings, but did not get a disk of vista with it as it came pre-installed. Help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://support.Acer.com/

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup, Acer should be Alt + F10 to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s of the recovery Partition of hard disk or system failure crash when you're facing up and running again.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Acer Aspire 6930 no screen, not even on external monitor

  One of my clients gave me an Acer Aspire 6930. He said that he was looking at internet porn and he got a message that he had to pay $300.00 to unlock his PC and it stopped on him (see the ice virus?). When I tried to bring up the laptop I have nothing on the screen to indicate to all life. But the disks rotate. I tried to boot from a Windows XP disk and still nothing on the screen. I tried FN + F3 and FN + F5, FN + F6 to no vail. I tried video routing using a HDMI cable and by repeating steps and received a 'no signal' on the external monitor and I tried the same process using a VGA cable for the external monitor and still "no signal". I tried to Flash the bios with a modded one since I don't know how to seprate the exe of the bios with insertng hex editor the usb flash drive and pressing the FN + ESC, and then press the power button and now the keys FN + ESC 5 additional seconds. I am now completely at a loss and could use very little help.

  Thank you

  Definitely one of our best posts.

  I'm sure you already said your customer to upgrade its anti-virus software and stay out of the porn sites.

• EPowerTray.exe Updater Acer Aspire 5733Z

  Hello

  I was wondering if Acer cared to have a solution for users running Aspire 5733Z pertaining to AcerUpdate Pub.-AcerIncLoc.C:\ProgramFiles\Acer\AcerePowerManagement\ePowerTray.exe

  I searched here and Google for about an hour and found no solution, nor a basic with a rep conversation is available for older models of Acer. No help here please?

  I don't feel the love when I saw this model on the link:

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/29567

  

  There are 26 m
  Hello

  Sorry for the bad link, here you go: http://global-download.acer.com/SupportFiles/Files/LiveUpdater/EXE/Updaterhotfix.exe available in the same download page. See you soon

• Acer Aspire V5 touch screen does not

  I have an Acer Aspire V5 portable touch screen. The touch screen worked well before, but just recently, it does not work. The laptop was purchased brand a few months again.

  Hi, Davinder Sandhu,

  Open the Device Manager

  Look for the points of Exclamation or question marks

  If you see these post back error code by right-clicking on the driver, and then select Properties

  The code appears in the box at the bottom of the general tab

  If this is not the case of the code, follow these steps

  Right-click on the driver and select uninstall

  Restart the computer and reload the Windows drivers

  Go to the manufacturer's website and search for updated drivers

  See this thread

  http://community.Acer.com/T5/desktops-all-in-ones/help-Acer-Aspire-all-in-one-touch-screen-after-Windows-8-Pro/TD-p/5179

• ACER 5750-6845 Black screen at startup - no postal codes?

  Hello everyone I'm hoping that someone has experienced this problem before that I'm stuck!

  My ACER 5750-6845 laptop computer is unbootable after working perfectly for two years. When you turn it on blue light comes on but no other activity, beep codes no post, no BIOS logo screen.

  I tried the static 'cold start' reset, tried the exchange of USB keys and it does nothing. This isn't a CPU card or replaceable graphics. It was working one day and then just stopped the other.

  Any ideas? Someone else had this and resolved?

  Thank you very much for your comments!

  -Artful

  Graphics card problem. As you already know which in your case means a motherboard problem.

  I'll take a wild guess here. It is NOT a device on the motherboard problem. It's a connection problem or the connector of the device.

  The easier and less frightening to solve problems are a connector problem. You probably already have some of this. Remove the battery and get the thing again. Replace all accessible connectors, you can find. So before you piece it all back once again, gently reinsert the battery, it works and hope for the best. Obviously better do all this on an insulating surface, although it is outside.

  If the above does not work, a line of welding or soldering connection has probably has been peeled off or cracked on the motherboard. To fix this, you must first prepare you while you wait for the results of Google search of these two words "solder reflow. Hope that you are not faced with this task, but unfortunately at this point I think that a rupture of the weld is more likely than a connector problem.

  Jack E/NJ

• Problem Acer Aspire V7 blue screen!

  Hello

  I've updated to 8.1 windows and now I have random blue screens that it is told in fourth; IRQL NOT LESS OR EQUAL

  what it means?

  Thank you

  I just bought a new samsung 1x8GB DDR3L stick now ive got 11.9 GB RAM works OK

• Screw size for 572PG Acer Aspire V3 (touch screen)

  Hello world

  I bought a brand new aspire V3 572PG about 7 months ago. However, several of the screws fell off the base of the laptop. Such is the magnitude of the problem, that the left edge of the hand-rest now turns.

  If someone could give me the size of the screws so I can order some replacement ones I would appreciate it a lot!

  Thank you

  Conor

  
  

• What is the amount of maxamum and speed of ram for acer aspire 5733z?

  I can't seem to find anywhere it teels than me the maximum and speed of ram of the machine (5733z) can manage. I want to perchase and upgrade of physical ram me. You know 5 minutes

  Nice day

  Until 8Gig DDR3 1333 Mhz with ram 2 chips

  Kind regards

  FReeZA

• The edition of Acer Aspire V17 black Nitro there an external mic input?

  I want to play on the shaking, but the microphone is not of a high enough quality. I bought a better, but do not see a mic input anywhere. Only one that is for a single helmet.

  The connector is 3.5 mm TRS

  headphones input works normally as entry too micro.

  you need an adapter like this (just an example)

  http://www.Amazon.com/STARTech-com-position-headset-splitter-adapter/DP/B00CPEZ4J6/ref=sr_1_7?s=Audi...

• How can I activate my acer Aspire webcam 5733z-4505

  How can I activate my acer Aspire 5733z-4505 webcam?

  Because when I open Acre Crystal Eye webcam it says CAMERA NOT FOUND!

  Hello

  1. what operating system is installed on your computer?

  2 did you change on your computer?

  If you are using windows 7, I suggest you to see link and check.

  See believes

  http://Windows.Microsoft.com/en-us/Windows7/seeing-is-believing-use-a-webcam-to-bring-your-Instant-Messaging-to-life

  I also suggest you to update web camera drivers from the manufacture of the product.

  Update a hardware driver that is not working properly http://windows.microsoft.com/en-us/windows7/update-a-driver-for-hardware-that-isn ' t-work properly

• Acer Aspire 5517 has black screen

  I have an Acer Aspire 5517 who was himself put out and there are some weeks I was referring to the community. He remains on now, but the screen is black. I was able to update the BIOS before it became dark permanently. It turns on, but nothing appears on the screen... How I struggle, shoot when I see nothing? Can someone give me something to try it please...

  Study

  Acer, considered the material in accordance with the rules of discussion is rightly. I forgot

  on that. If you goggle Acer 5517 REPAIR, a link to it will appear in PDF format

  form. I think it's at Acer in Australia or Austria. It is in English.

  I didn't know that you had used the device for some time after that the BIOS flash. Ah, without

  because it and make some of my own tests, I fear I'm exhausted out as regards

  suggestions on repair. Good luck with it.

• My Acer Aspire 571 e5 allows me to connect, but then I get a black screen and I see my cursor

  Hello

  So my Acer Aspire 571 e5 which ive been using for about 3 days just had a windows update. Now, it starts well but I get a black screen when I connect. However, some programs are always able to see and popup randomly. I also tried to go into my bIOS, but it asks for a password that I don't know.

  If you press CTRL + ALT + DELETE you are able to open the Task Manager?

  or try this:

  (1) once you are on the screen of login password, press on and hold down the SHIFT key and click on the power icon (lower right corner of the screen) and restart your computer... (Remember do not type a password)
  (2) you will get advance options. Click on troubleshoot---> advanced---> start---> restart settings---> and select SAFE MODE WITH NETWORKING

  (3) once in office in safe mode, open Device Manager, click on the video card, right-click on it and choose unisntall

  (4) restart and check if it works

• Acer aspire 5742 goes from black to a screen that says acer enter startup f2 then back to

  My acer aspire 5742 doesn't start correctly, it goes from a black screen to a screen that says acer enter startup f2, then alternates between these two screens.

  Right now I have managed to turn it on and I'm in the treatment of support up to an external hardrive.

  I rang acer support and they told me I did this install windows 10 (about six months ago) and although he seemed fine, it was corrupting the (motherboard? I think that's what she said). the lady told me that I should restore laptop to factory settings.

  Can someone please confirm for me that's what I have to do?

  The fact that you were able to start normally after F2 in the bios menu, F9 to re - set the bios to factory default then F10 to save this setting, the default BIOS * strongly * suggest that the bios was losing his in the memory of the specific hard drive that was installed.

  Jack E/NJ

• Model Aspire 6530 Acer ZK3 HELP me please! eRecovery and black screen

  Hello world

  I'm completely out of my League, and I'm hoping that one of you can help me. The Acer Aspire 6530 had the black screen/no work so I thought I would format (option F10) to find this eRecovery is coming with a gray screen with 3 options:

  ---> Restore system to factory default

  ---> System Restore from the backup of the users

  ---> Output

  The only option highlight is out and I can't click on another option. My question is can I download the erecovery disk and put it in the computer or how can I make it work?  Something else, as someone may think, please.

  Unfortunately, we do not offer a version of eRecovery by download. You can try to reload the operating system with recovery disks, if you think there may be a problem with eRecovery. Recovery discs are available on http://store.acer.com, click eRecovery.