Acer Aspire 5830TG will not charge after waking from sleep

Similar Questions

• Tecra R840 not stopped after waking from sleep (USB, BT does not work)

  Hello

  I have a problem with my R840 running win7pro + SSD.

  After he wakes up from his sleep:

  -No USB activity (but there is power in ports because I can see the leds on the external HARD drive or mouse)
  -my Bluetooth mouse no longer works
  -my internet connection will work after 1 or 2 minutes of waiting
  - and... the laptop will not be stopped, unless I press the physical button on / off for 5 seconds or so!

  In Device Manager, everything looks ok! In all power management devices/REPEATER MULTIPORT USB etc is on do not turn off the devices to save energy!

  Already own started the laptop several times and the problem remains.

  Everything is fine if the laptop can't SLEEP!
  But I put it in sleep mode and I wake up it I have all these problems!

  Any suggestions?

  Best regards
  Paulo

  I think it of very difficult to find a solution to this problem because the software (OS) and hardware (SSD) has been changed.

  So the question could appear due to new software and change of material missing or bad drivers.
  To me, it seems that the issue requires further investigation.

  Did you notice the same problems using the preinstalled Toshiba system and the original HARD drive?
  I think that this should be checked first.

  By the way: this is the BIOS updated?

• Bluetooth is not ready after waking from sleep on Windows 7

  After updating my Tecra M10 Windows Vista x 64 Enterprise to Windows 7 x 64 enterprise, sometimes, when I wake up the laptop from sleep, Bluetooth is not ready.

  Hibernation does not solve the problem, he needs a reset which is a problem for me because I usually have a lot of open applications.
  In this case, the only Bluetooth devices in Device Manager are:

  * Bluetooth RFCOMM
  * Bluetooth USB Controller-5 at TOSHIBA

  When everything works well, the Bluetooth devices in Device Manager are:

  * Bluetooth RFBUS
  * Bluetooth RFCOMM
  * Bluetooth RFHID
  * Bluetooth USB Controller-5 at TOSHIBA

  How can I restart Bluetooth without having to restart the entire system? Turn wireless on and off the silder side does not work.

  Thank you
  Paulo Morgado

  Thanks for sharing!

• T400 not re after waking from sleep - w7

  I have a t400 with integrated f5307g wan device, which works very well, but after I wake the laptop from sleep, the wan card disappears in the menu fn + f5 and can not be turned on. I have to restart to reappear.

  IM using windows 7 with the latest drivers (according to the lenovo system update). does anyone else know this?

  has not tested linux? If so, reset BIOS default values and should be solved.

• Satellite T110 - Defective Bluetooth after waking from sleep

  SATELLITE T110 Bluetooth will fail after awakening from sleep.
  The icon will be flick between white and green as he seeks my device (phone).

  I ve reduced the problem to the laptop, because if I try to pair again phone to the laptop it fails. It's almost like he has a block?

  Operate as planned, then I have to charge fully.
  Bluetooth connects then as planned.

  It only became a problem because I installed the latest BIOS v 2.40
  I use the 64-bit Version.

  When the problem occurs I run the Bluetooth Diagnostics and it comes back as fine no error reported. It s a pain now because I use the laptop mode "sleep" more off.

  This is due to the new update of the bios.

  Can you after waking from sleep just restart BT stack and try to connect to the mobile phone?
  You mean that with the old version of the BIOS, everything was OK?

  Last question: what was the reason for the update of the BIOS? I hope not the fact you want to have the latest version.

• Photoshop CC 2014 quits unexpectedly after waking from sleep on Mac OS x. How can I stop this?

  Photoshop CC 2014 quits unexpectedly after waking from sleep on Mac OS x. How can I stop this?

  suturenet wrote:

  It's a stupid system, it won't let me post more of the report.

  Yes, the forum software is stupid, but you are insulting the wrong people.

  BOILERPLATE TEXT from the FAQ:

  https://forums.Adobe.com/thread/375816?TSTART=0

  Do not be abusive or aggressive in your tone

  A post of sounding aggressive, demanding, accusatory or abusive will often evoke a response aggressive or abusive and unnecessary.

  Remember, you do not discuss Adobe here in the user forums.  You ask the help of users of volunteers like you who give their time for free. Nobody has any obligation to answer your questions.

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

• Satellite A660-18 - powers off after waking from sleep mode

  My powers of Satellite A660-18 wide for 2-3 seconds after waking from sleep. I upgraded the memory from 4 GB to 8 GB, using the site of Crucial, so I know it is compatible. BIOS is updated to 2.00.

  Don't know what to do, how can I fix without turning off completely from mode "sleep"?

  Hey Buddy,

  > I upgraded the memory from 4 GB to 8 GB
  And have you had the problem before you upgrade memory too or as memory upgrade?

• Acer Aspire XP, will not load, gives calling pool bad error bluescreen 0x000000c2 (0 x 00000043, 0xc6f6c000, 0x00000000, 0x00000000)

  Have acer aspire one, it turns on appares to load windows xp but stops and has a pool caller bad blue screen, it lasts for a half second, so had to video screen to get the code 0x000000c2 (0 x 00000043, 0xc6f6c000, 0 x 00000000, 0 x 00000000). NetBook then passers-by to start in safe mode, last good con fig etc.

  You can choose one of them, but shut up just go back on screen. Went out disk hard netbook has no CD drive, put in the caddy and connected to another computer, can access all the files came out RAM and installed on another computer, is very well... Hard drive so OK. and Ram OK, so it's XP drivers...?

  took a hard drive of lenovo and put it in the acer, 4 months he turned acer and it works very well and is much faster.

  now I know his thinking about windows xp vista or windows7 operating system update.

  looked at windows xp folder driver thought about reinstall but it is best just to remove / upgrade the system

  No new hardware in six months.

  blue screen comes on during a half sec in safe mode, then restarts.

  pressed F8 got more options said to not restart if fail, then it would freeze on blue screen.

  said press alt gr f10 or f12 to get factory files but the option isn't there.

  When I mounted the disc via caddy with the lenovo there only one partition so no recovery is prescent.

  all user files can be viewed and copied, fortunately...

• Desktop computer does not display the computers on the network after waking from sleep.

  Both computers work on Vista Home Basic. Problem started after computers, the router and a DSL modem has been turned off and unplugged. After the awakening of the day before, the Office would display only the router and the laptop, but the way that he could not establish. Initially, a reboot of the desktop computer has solved the problem.

  Reset and re-installed the router. The three elements of the network were visible after the start, but IE 8 soon at the opening of the homepage. Again, after "standby" mode, only the router and the laptop displayed.

  After additional restart, only the router is displayed. The laptop shows all three elements and accessing office files.

  Suggestions?
  Mike

  Hi Syed,

  I did a full reset/reinstall the router, carefully following the manufacturer's instructions. Both computers are displayed in each of their respective lists of network, even after waking up from sleep mode.

  This issue is resolved.

  Thank you

  Mike

• WiFi disconnects after waking from sleep

  Hey guys,.

  I hope someone can help me with this... I have a 2015 mid pro 15' mbp and about 3 months ago, it began to show this problem, whenever I close a lid for like a hour or more, or standby manually, and when I come back and it up once again, he start connection losses for like a minute, after waiting, he returned again to a wifi connection... I have to say its strange, especially when I active power nap...

  To be honest, Im not sure if its failure of my router (which is Asus RT AC55U) or macbook, if someone could answer me with some advice or guide I would be grateful

  Or is - this common cause? I was looking for a little bit, but found only questions that he used to connect again at all. (Mine reconnects in 1 minute or so, but I like things quite well, and it drives me crazy, because I don't know why the connection loss occurs).

  Once again thanks for any advice/help etc.

  WiFi will probably through authentication after waking up

  Try plugging a router and modem for 90 seconds and plug it back

  See if this will have an impact

• Satellite L40-139: new graphics driver is causing the problem after waking from sleep

  I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.

  In the last days I've updated the software and drivers from the Microsoft Update web site.

  Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 7.14.10.1350, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.

  Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 7.14.10.1350 version) has caused many other problems on a variety of hardware and software platforms.

  Does anyone have a definitive solution for Satellite L40?

  I looked at four options.

  1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.

  2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.

  3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 7.14.10.1280 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.

  4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.

  Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?

  Hello Peter

  If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.

  I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.

  Please post the result.

• black screen after waking from sleep

  have a 2009 Intel-based iMac that wake properly from sleep if more than 30 minutes. It is a screen 24 '', 5 GB RAM and processor Core 2 Duo 3.06 GHz, 256 GB SSD drive and was just upgraded to El Capitan at the start of this behavior. The extra RAM and SSD have been installed a few days before the upgrade of El Caitan, so am not sure that the upgrade of the OS was the culprit, but it seemed to work normally after the SSD and RAM have been added. After that the computer sleep long enough to power down disks, etc., the screen remains dark when the computer wakes. If you put it to sleep then it wake up immediately he returns normally without problems. You can hear the startup sound and can even connect and enter the password and hear the mail and other programs that are running, giving their notification sounds, etc.. However, the screen remains dark. If you restart it 10 or 15 times the screen will start normally and the computer works perfectly. diagnosis seems to indicate normal operation. I tried to reset the SMC and the NVRAM and start in safe mode, but these things have no effect. Is it possible to get help with this?

  I run Apple Hardware Test and found no hardware problem under standard test or extended. I ran the first aid on the SSD, but no permissions problem have been found. It is not as if I have a hardware problem, but a problem of software not defined.

• Wi - Fi disabled after waking from sleep - G9-591-70VM

  A few days after the awakening of the laptop from sleep, the WiFi has been disabled.

  Only the ethernet with a red 'X' icon was present.

  Troubleshooting and looking in the network settings of the Control Panel, it was as if a Wi - Fi connection did not even exist on the laptop.

  Restarting the computer does not resolve it. Stop and start the dos system did.

  It happened again just now. All this experience? Thank you

  Hi Kenshin

  What network killer driver do you use so that what happened?

  If you use a driver updated the Acer (pre-installed with the machine) I recommend that you download the new driver directly from the site of the network Killer (here)

  1. uninstall the driver of killer

  2. restart the system

  3. install the new downloaded driver

  4 restart once again

  After that I did anything ever happen related to the network for me yet once (for example, BSOD, lack of WIFI, etc.).

• LR 6 is unresponsive after waking from sleep

  I upgraded to LR 6 in January, and all was well until a few weeks ago, when everytime I wake up the computer from sleep mode, if LR is running, it stops responding. No amount of waiting will allow to become sensitive.

  Of course, I could just leave before going to sleep, but because it takes a while to start, I'd rather not.

  I tried to delete all the related Adobe prefs.

  Technical specification:

  MacBook Pro 2011, 16 GB RAM, new logic board after the failure of the GPU (twice)

  LR 6.3

  Mac OS 10.9.5

  OK, you have almost eliminated a faulty hardware.

  Problem blocking 6 Lightroom on MacOS 10.9.5 wakeup | Community customer Photoshop family

  I noticed you talk about reset the LR preferences file, which will cause support GPU to be re-enabled by default.

  Please check the LR Edit menu > Preferences and make sure you have "USE Graphics Processor" unchecked as below. Close all applications, shut down your system, and then restart your system. Even if it is a test not controlled start/stop of the cycle for the chance and see what happens.