Acer Aspire E1 471 does not start. "no boot device, insert the boot disk and press any key".

Similar Questions

• Acer Aspire 5742Z Notebook does not start

  I am running Wndows 7. When you press the button "power on", that the power light turns on, the fan starts, the DVD player made his usual noise and then after 3 seconds, all this stops and all the lights go out. The system restarts immediately, and the process is repeated - over and over again. He just constantly loop. There is nothing showing on the screen at any time.

  I checked the RAM and HARD drive and they seem to be OK. I removed the DVD player and tried different combinations of race on foot with and without lead power and battery connected. All to nothing does not. I can't access the BIOS even by using the Fn + Esc key combination.

  I'm now leaning to believe I have a probem m/Board.

  If anyone has a solution I'd love to hear it!

  Shrappers,

  Looks like you are on the right track and did all the correct steps for the issue. I agree that the problem is hardware related. All devices seem to be powered, but the loop could be linked to the motherboard.

  If you are looking for repair, please contact technical support in your region. If you want to repair yourself you can always contact one of our partners in parts for a motherboard.

• Windows xp help does not start - unmountable boot volume and recovery console work ethier

  Original title: windows xp help does not start and the recovery console will not work ethier

  the symptoms are used to my windows XP boot it says unmountable boot volume, so I tried to fix it via the recovery console as everyone says but every time I enter fixboot for one of my drives hard /i have 3 I think / it won't work and says unidentified boss so I create another boot and exit area and it does not work so I go back and try fixboot again and it says unknown again after the creation of we know. Same mistakes for chkdsk /r and /p never tried / f but I'm guessing that it won't work ethier. It's like my recovery console won't save the changes it brings to all of my discs hard does anyone have an answer to this

  Hello
  • Will there be any changes made before the show?
  • Did you try to start in safe mode?
   
  You can check these links:
   
  Unmountable Boot Volume
  http://support.Microsoft.com/kb/555302
   
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545
   
  If above does not work, I would say to contact the manufacturer of your computer.
   

• Acer Aspire S7 392 does not start after the new Antivirus installation

  Hello

  I bought the Acer Aspire S7 392 in October this year of digitec.ch AG here in Switzerland. Everything worked well until December 19 when my Antivirus McAfee has expired and I decided to change my Comodo Internet Security antivirus. A month back, I had installed Windows 8.1 as well and things were smooth until last night. Last night, when I installed Comodo Internet Security, the computer requires a restart, I did, and then my computer erased. I could not even reached the Acer logo at startup.

  As I tried to check the observation of details of covers them this white screen problem, Irealized that many people suffer from a similar problem. It seems that Windows 8.1 and an installation of a new antivirus may have led to this white screen problem. In addition, it seems to be a bios problem that the computer would not start and I hope that someone could help me with this problem.

  Thank you very much Acer-Tommy. I had to take it to the Acer Support in Switzerland. He partially solved the problem. My S7-392 has a built-in battery that I had to reset which allowed the laptop to reboot normally. As in, I was able to boot up to Windows 8.1. However, as soon as I logged into Windows, it hooked up soon. Do the restart 3 times triggered the automatic repair/update option. That I took and returned to Windows 8. I had a Bios 2.05 2.03 intead and I had to install 2.05 before making updates. I recommend you seriously all the people who use the S7-392 to strictly follow the installation procedure for Windows 8.1 mentioned on the Acer site.

  Please update your Bios to 2.05 before installing something new, especially a new anti-virus.

• Acer Aspire One 522 does not start

  I replaced the RAM of 1 GB in my 522 an Aspire. After that the netbook starts not more. Only the blue power led flashing and I hear the fan. I can only turn off by pressing the button for 5 seconds. The screen is black and I can't access the bios. Now the laptop no longer starts with the original module either. I'm looking for a way access the bios, but I found nothing for this model on the internet. Hope someone can help me. Thank you

  Finally, I took a better look at the RAM module and the slot. Although I replaced the modules many times it seems that they were not properly placed in the slot. In any case, it works with my new 2 GB module.

• Acer Aspire laptop computer does not start

  Lites button power screen stays black, the system tries to start, but he keeps power button light turns off.  I have a new disc of windows 7 32 & 64 bit.  I have the disc as a dvd before I turn on the power button.  With the new windows 7 dvd of 20 to 30 seconds to place power turns off.

  Anyone with knowledge of this problem would be grateful.

  Thanks in advance

  Hello Mojo,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?

  2. What is the brand and model of your computer?

  3. What are the troubleshooting steps you have tried so far?

  I understand that you are unable to start your Windows 7 system. To prevent your system from automatically restart, try to access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Select the option disable automatic error system reboot. Also, I suggest you try the following steps of diagnostics to verify if you are able to reach the office in one of the following modes methodical.

  Method 1:

  Please follow the underlying steps:

  Step 1. Disconnect all external devices except the keyboard and mouse.

  Step 2 I would like to start your computer in last known good configuration.

  If method 1 does not work, go to method 2.

  Method 2:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.
  Start your computer in safe mode

  Step 2: If the system works fine in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  If method 2 does not work, go to method 3.

  Method 3:

  As you cannot start your computer at all, I suggest to run a Startup Repair to repair the damaged boot system files and try to boot into normal mode. See the section: How to use Startup Repair in the following link.

  Startup Repair: frequently asked questions

  If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally.

  If the problem persists, proceed to method 4.

  Method 4:

  You can use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)

  • A boot sector

• A Boot Configuration data (BCD) store

Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows 

Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• My iPod 5th generation does not start (it will stay on the apple logo) and will not be detected by iTunes.

  Last night I tried to turn on my iPod that has not been loaded. I plugged it so that it can start loading. I think the iPod as was the accused, has no need for me to start and should have done by itself. When I pressed the button home to start using it, I noticed it was not on. Then I pressed the power button and then saw he was showing the Apple logo and then it turns off again. I tried pressing the "home" button and the Start button / stop at the same time and the same thing will happen. I also tried connecting to my computer and it did not recognize.

  Try the remaining actines of the:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Acer aspire e1-522 does not start

  Hello
  I have had my acer for almost 1 year now and recently started having really slow down and freeze until it got bluescreen. When it restarts automatically then it restarts.
  He gets just stuck to loggo Acer screen.
  When I then try to restart it myself it always gets stuck there.
  I tried to get into the BIOS but I can't. Tried pressing F2, F8, Alt + F10, F10 still stuck to the Acer screen.
  I'm literally stuck on the Acer screen. When I bought the laptop to the store I got it in a box and I didn't get a restore with her CD so I can't do anything from here.
  I saw in a forum that I could try to remove the battery, the charger and everything connected then hold powerbuttton for 15 seconds and then plug in the charger. Still stuck at the acer screen... Does anyone know what I need to do? Since then, I can't enter the BIOS Gets a little difficult to do nothing at all...

  Hello

  Based on your entry is probably HARD, his best contact Acer drive question as you issue with BIOS as well.

• My ACER ASPIRE 4551 G does not start

  When I try to turn it on, I just get a black screen. The fan starts but stops eventually. When I try to hard reset it it turns off the fan just starts again. I have to plug it into the AC for I can be able to feed it again. And also, last thing I remember is that the clock is not always on sync every time I start it. Help, please!

  Hello

  You probably have a problem of DC connector. I suggest you clean it after removing the battery.

• Acer aspire 10th switch does not start the Bios Setup screen

  I'm trying to start on the bios Setup screen to change the boot sequence to test a rescue disk/windows 10 install usb, but all by pressing f2 during POST it just boots to windows of ideas anyone? Thank you

  power the device turned off, press and hold the power + Volume UP

  After awhile, it will boot to the BIOS.

• Acer Aspire 5610Z Windows does not load... No recovery cd

  I have an Acer Aspire 5610Z Windows does not load, when I use the F10 it comes up says:

  Modify the Windows boot option for: Microsoft Windows Vista

  Path: \windows\system32\winload.exe

  Score: 1

  Drive hard b44bb44b

  [/ noexecute = optin]

  That do I don't know...

  Thank you

  "When I start the laptop, 1 screen 2 times, beebs gives me the whats available in the computer, Press (F1) to resume, or (F2) of the installation.

  I wish that you mentioned the "beeps" in your original question.

  When you start a computer, you will receive a 'beep', which indicates that the motherboard has spent his own self (POST tests. Power on self test))

  'beeps' (plural) normally indicate a hardware problem.

  Read the Information on the links about different codes "beep":

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  Contact the Acer Support if under warranty.

  http://support.Acer.com/us/en/default.aspx

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• Acer Aspire Wifi S3 does not

  WiFi an Acer Aspire S3 adapter does not work and he repeats to me "limited." It has always been a quick an easy solution to the day, the admin has forgotten their password and can not remember. They changed on a different computer, but the Acer could not know that because he had no wifi connectivity. No one can access the command prompt, or anything else that requires an admin password. The laptop is now useless and no one can reset or refresh it because you need the admin password to do so. There are no. ETHERNET SLOT anywhere on the computer.

  All solutions?

  In addition, Windows Update cannot update anything because there is no wireless connection. This is a serious problem...

  Help, please!

  There is only the locations of USB, HDMI and SD card on the laptop.

  Every time that you try to connect to the Admin, he says:

  "This computer is in offline mode. Connect, and then try again"or something like that.

  Hello

  Given that the admin has forgotten the old password and due to the unavailability of the network connection, the device is unable to synchronize the password. At this point of time you have get the device for a coverage area of network where you let the computer, the password synchronization or you must put in the old password to connect.

  See also, Cliff_NCliff_N responded on 7 December 2012 post

• Satellite 210ct does not start - insert system disk and press a key

  I have a very old laptop and want to move down. It is a 210ct Satellite. When I start upward, he goes and initializes memory and then after about five minutes, to be on that screen it said to insert system disk and press a key...

  It is not the disk hard as I tried it in another laptop and work very well. And then just sitting there.

  I really want to make it work again!

  Thank you

  Hello

  For me the description sounds like the laptop can not find an OS on the HARD disk bootable.
  The laptop trying to boot from the HARD drive and Windows has not been installed on the HARD disk or portable computer booting from the drive, but the environment is not bootable.

  Have you tried to boot from the recovery delivered CD or have you tried to reinstall the operating system?

• Firefox does not open in full screen on the task bar and I have to go over it to see the web page.

  Firefox does not open in full screen on the task bar and I have to go over it to see the web page.

  Firefox window is sometimes "off screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt. You can delete this file and Firefox will return to standard window resizing.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or the start search bar menu type or paste the following and press Enter to drill down to the profiles folder:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  Then, to re - light bars, you can use one of the following methods to view the list of the toolbar, and then select the desired bars it:

  • Right click on a place empty on the tab bar (or the button '+')
  • Press the Alt key to activate the classic menu bar > view > toolbars
  • in customize mode > show/hide toolbars (see: Customize Firefox commands, buttons, and toolbars)

  To activate the menu bar, toolbar bookmarks or other bars, click it in the list.

• OCR does not work on mobile devices after the update. How can I make it work?

  Ocr does not work on mobile devices after the update. How can I make it work?

  Hello

  Acrobat Reader mobile apps (for iOS, Android, Windows Phone) is the free PDF viewers. They don't support OCR (Optical Character Recognition).

  However, you can purchase the subscription online service called Adobe export to PDF and use it in mobile applications of Acrobat Reader to convert PDF documents to other formats (e.g. Microsoft Word, Excel, PowerPoint).

  Have you already bought the Adobe online subscription service export to PDF?  Would make sure that you're signed in with your Adobe ID to use the service?