Acer Aspire E1 - 571G - load

Hey everybody,

I've had my Aspire E1 - 571G for about 2 years now.

Data sheet:

3230 M i5

12 GB of RAM (1x4Go) (1x8GB) - 1333 MHz (updated original 4 GB of RAM)

WD 500 GB (5400 RPM) HARD DRIVE

Windows 7 Ultimate x 64

He began to develop a problem then load, whenever I have it plug, it makes its normal beep and the charging light lights up and indicates that the laptop is charging.

After about 30 seconds, it will beep once again, telling me that the charger was unplugged (which he did not), he stops in charge, the charge indicator and power light flashes and the laptop stops loading.

Before the question wasn't that annoying, I had to plug in charger at a certain angle and she would charge very well. This no longer works.

It stops just the load after 30 seconds I plug in the charger.

I ordered a new battery after I read somewhere that this is a related issue. New battery and battery show the same results.

What could be the cause of the problem here?

I did a fresh install of Win7, deleted the drivers of the battery from the Device Manager, rebooted so that they would be re - install. Nothing has worked.

Any response would be greatly appreciated.

Thank you.

Slightly straighten this part (see attachment).

Tags: Acer Laptops

Similar Questions

  • I want to improve my Acer Aspire E5 - 571G - 57CS of 4 GB of RAM DDR3 L for a 8 GB of RAM. Is this possible?

    And if the answer is Yes, then the warranty service would free it will affect my warranty? In addition, should what kind of RAM I look for if I want to upgrade? Aries will be added to the existing RAM and it will replace it?

    I'm sorry for so many questions, my English and my ignorance when it comes to upgrading a laptop. And is all what I should know about upgrading RAM as it might damage the data on my disk, etc. ?

    Notes:

    I still have the warranty and the stamp is still there.

    Data sheet:

    • Intel Core i5-5200U 2.20 GHz
    • NVIDIA GeForce dedicated 820 m with 2 GB of VRAM
    • HARD DRIVE 500 GB
    • 4GB DDR3 Memory (RAM) L
    • Windows 10 Pro (i think)

    I know not if Acer will modernize under warranty, you must remove the motherboard to increase the RAM, the installation of CPU - Z to find out the exact your RAM specifications, then buy with timing and characteristics and to update yourself, if you are not sure to dismantle get performed by a technician on site, you can find the cost of this upgrade for your support of Acer local as they can do for one, compare prices with the quote from your local technician.

    You will lose all the data from your hard drive because of the upgrade of RAM but I tell reflect you to back up the entire system on an external hard drive using Macrium or similar utility.

    This is to show you how to upgrade and what is at stake:https://www.youtube.com/watch?v=rmsFDi_qsnQ

    This is just one example to show how to find the upgrade for your laptop and you don't need to buy Crucial memory, any brand works as long as they match the same characteristics as your current RAM.

    http://www.crucial.com/USA/en/compatible-upgrade-for/Acer/Aspire-E5-571g-38vf

  • What is the pre-installed windows version 8 on my acer aspire V3 - 571G?

    I have an acer aspire V3 - 571G, unfortunately, I lost my hard = active operating system disc

    I found a way to get the serial number of the bios, but I need to know the version of operating system, I installed windows 8 pro but he would not accept the activation code... so can you please help me?

    If this isn't Pro, he is very probably Windows 8 (Core). This is the standard edition of windows 8 and is called only (Basic) to distinguish it from the OS itself.

    UPDATE: after checking on support.acer.com, it's appears the newest operating system for your computer is: 8.1 Windows 64-bit

  • You can replace the keyboard on Acer Aspire E5 - 571G - 59 CT?

    Hi all

    I can get a good deal on a laptop Acer Aspire E5 - 571G - 59 CT.

    However, there is a downside. They keyboard is in German. I think that the German layout is QWERTZ?
    in any case, I want to know if it is possible to replace the keyboard with a keyboard with a United-States-layout (QWERTY).

    I noticed several online shops offer keyboards, but I'd rather be safe on this fact.

    I can find keyboards, with provision of the United States, for Acer Aspire E5 - 571 G '-part, but not for the TC model 59. Does it matter? I think that the last part is reserved for configuration, right? If anyone can confirm this?

    The keyboard I have found so far is: http://bit.ly/1EVk49k
    Even cheaper eBay: http://ebay.to/1vjvXG9

    So far, thanks for responding. Very much appreciated.

    Concerning

    Hello

    Yes, the last characters are the configuration for this country (Germany).

    You actually have this keyboard:

    NK. I171S.00DKEYBOARD (GERMAN)
    NK. I1713.05PKEYBD.104K.BLACK.GERMAN

    You will need these U.S. keyboard:

    NK. I1713.066KEYBD. US - INT.103KS BLK
    NK. I171S.00WKEYBD.103K.BLACK.US - INT.WIN8

  • Cannot start Acer aspire V3 - 571G "scan and repair drive (E): 27%.

    Hello! I have an Acer aspire V3 - 571G. But I have a problem now, when I boot, the screen with the Acer logo appears, with the message: "Analysis and repair Drive (E): 27% Complete" and it never moves from 27 percent. So I unplugged the computer sometimes and sometimes a message asking me to restore to an earlier version. Once I tried to restore, a screen with the Acer logo appears. Before I restarted the computer and had this problem, I downloaded a scanning software from disk on the Ookla Speedtest site, but since he cannot solve all the problems, I downloaded another similar software by AVG Netherlands BV and fixed all the problems. Then they said that I needed to fix something in the Device Manager (3 of my miniports were not work) so I looked on the net for a solution, that I followed and uninstalled all 3 miniports. After the AVG scan, it asked me to restart, which I did later and could not get more in Windows. Any help would be appreciated. Thank you.

    I finally solved this problem! After starting, press F9, and then click "restore." Then you will need to be patient and start the computer normally will be! Here it helps other people with this problem too.

  • ACER ASPIRE V3 - 571G computer laptop keys some work and sometimes don't

    I got an ACER Aspire V3 - 571G recently my sometimes key in my habit of working laptop keyboard and sometimes I press the keys combinenation give (Q and not work w & m), me 3 or # .i wonder what an antivirus program or my hardware problem scince I check my device is up to date, I don't know what's wrong with it.hope can give me the answer and solution thanks a lot. Replay ASAP

    Hi Panjlia,

    Thanks for the reply.
     
    Please check if you have followed the instructions mentioned in the previous post.
    See the article:
     
    Let us know the result. If the problem is still not fixed, we will be happy to help you further.
  • Acer Aspire V3 - 571G not hot.

    Hello

    I have an Acer Aspire V3-571G53216G50Makk for 3 years now.

    But since it's new it kept to reach high temperatures.

    And when I'm games it comes in close to 100 ° C, which is not good for the GPU & CPU.

    But the problem is that the fan does not spin at 100%.

    Does anyone have a solution to change the fan speed?

    Things like Speedfan, Acer FanController do not work.

    Or if Acer could update FanController program, it would be useful.

    I hope someone could help me

    Greetings,

    David

    Hello

    Well, to my knowledge there no software provided by Acer that could help you control the speed of the fan for your computer. I had some heat issues with my laptop, and some people suggested me to change the thermal paste. I did and I got a temperature much better after changing thermal paste in some applications (notably for the GPU), but in other cases, the only thing I did is to reduce the thermal regulation. For example in AIDA64 extreme stress test usually my CPU was about 2.2 Ghz front at full load (97 C) due to the thermal regulation. After changing thermal paste, my CPU running constantly at about 2, 9 - 3.0 Ghz (97). (I7-4720HQ processor 2.6 ghz) So I had less control but as you can see it the same temperature. Overall is a very good improvement in my opinion.

    Then you can try to change the thermal paste and see if this can help you. However, this idea is not very good if you do not have a good understanding of the computer and also a good guide to how to disassemble your computer.

  • Acer Aspire V3 - 571G hang up when connecting to the internet

    Hello

    My Acer Aspire V3 - 571 G sometimes crashes upward and freezes when I want to connect to the internet or a network, for example when the network cable is pluged, and I turn on the laptop, he hung up on the Welcome screen. or when I want to turn on sharing, he hangs up. Now I use windows 7 and later, I used windows 8, and this problem in windows 8 has been exist, and the blue screen appeared. I bought this laptop about 1 month ago.

    Thanks for your help

    Problem has been solved, by unistalling IDM a page fault occur by IDM and couse to hang up system.

  • Acer aspire can't load the Windows operating system

    Acer Aspire V5 PG 471 refers to starting a black screen with the message "operating system ' not found after upgrade from 8.1 to 10 Windows failure. The road to recovery key F2 does not work (the button not responding).

    Is there a solution to this?

    Follow the instructions on the link I posted.

  • Install Windows 7 on acer aspire E1 - 571G

    Okay so I saw this posted a few times, but is performed a few months ago.

    My problem: bought a new laptop, the material of the love, hate the abomination called 'Windows 8 '.

    My first solution: install from an old boot win7 disk I found lying around my apartment. (can not complain too much about win7).

    NEW problem at hand:

    After you delete the partition of win8 (beginning to think that I would not do), boot from win7 installation disc, all dandy until we reach page "Where do you want to install Windows?" & it gives me an error:

    "Windows cannot be installed to this disk. The selected disk is the GPT partition style. »

    After a little research, I found that this has something to do with legacy mode bios (I changed it in a successful effort to turn off the secure boot), so I go into the bios & change for UEFI, try again: now install win7 is suspended from the page "starting Windows." Please, anyone with some advice.

    1. disable "Secure boot".

    2 - change UEFI to Legacy

    3 format the installation in NTFS partition

    4. install WIndows 7

  • Acer Aspire V3 - 571G Bios settings

    Hello

    My laptop is very hot, I bought just like 2 days ago. It most of the time up to 60 ° c and the only thing that I opened Google Chrome or Skype alone, I think it's way too hot for a single program.

    I want to change the fan speed I tried settings of the Bios and could ' t find but then I saw there was a new update, I've updated and I still can not to change the fan speed.

    I tried FanSpeed, NVIDIA Inspector and things like that, I can't change it there either. Even though same NVIDIA Inspector allows me to overlock but I fear that will damage things, also since the laptop is new.

    Then. How can I change the speed of the fan?

    Thank you in advance if someone answers.

    You bought two days ago? I would like to take back. Someone at the factory might have a bad day, and you don't know what other problems will find.

  • Not found network controller driver (Acer Aspire V3 - 571G)

    After a few updates of windows my network simply controller driver stopped working. I tried to install all the drivers for connections wireless from the CD I got with my laptop, but it is not still yoking. All installations were successful except installation for Intel WiDi utility which displays error with platform or is not able to install because the same program is running. I don't know where to close and cannot find where to uninstall them.

    Help, please! I've had this laptop for only 4 days and I can't use it.

    I solved the problem with DriverScanner.

  • Acer Aspire E1 - 571g too hot maybe

    I've had this laptop for 4 months, I am simply to start playing and noticed the tempeature maybe too hot
    At the office, I get: 52-60 degrees celsius for cpu depends on its use, when I start to play like the League of legends my cpu goes to 80-86 in far cry 3 comparable same somteimes 88-90, is it safe?
    My config: Core I 5 3230 M, Geforce 710 M with 2 GB of video memory to 8 GB of ram
    Another problem: I can not install epower I download the old installation succsesfull version but after reset, I can not any iterface and cannot start the program.

    If you use your score to play most of the time, I think it's quite normal, if it's hot. I want to say hot "tolerable".

  • Acer Aspire E1 - 571g bluescreen

    Hey guys, I've been do bluescreen lately playing games like Marvel Heroes, Age of Empires 3, etc... What happens exactly, it is that the game freezes and I get a message saying "nvidia kernel mode has stopped working and has been recovered" after a few seconds, he of bluescreen. All this started to happen when I upgraded to 8.1 Windows and installed the drivers for it. Been looking for the internet up and down tried all corrections possible and I can't just not work with certain games, it seems that it is a widespread problem with nvidia GPU.

    Any suggestions?

    Hi Tindude

    Not an easy solution, I'm afraid - you may need to go back to Windows 8.0. Some hardware is not fully compatible with 8.1 and can cause errors or outages.

    So, if you can - back to 8.0. This will result in a complete reinstallation of Windows of your media partition or recovery disks/USB, so save all your data.

    If you are STILL getting problems after returning to 8.0, the question will then be with your chip Nvidia, but as you said it worked fine before, so it should be good.

  • Acer Aspire V3 - 571 G | No boot device

    Hello world

    I have Acer Aspire V3 - 571G, worked perfectly runing 8.1 windows, however when I checked disk management I discovered that there is the C: drive, the recovery partition of primary health care with 15 GB and another two recovery with their size 400 MB partition, so I decided to delete it and merge to drive c. :, I deleted and I kept only the acer recovery partition and c drive only, the begein question when I restart the computer, it only shows me that Message: when the Startup Mode is UEFI says: "no boot device, press a key" and when I pass the Boot Mode Legacy BIOS says "no boot device - insert boot disk and press any key".

    Any body could help me restore my computer back to normal?

    Thank you much in advance.

    Mehdi

    Mehdi,

    Happy that you guessed it works again!

    I think it might be useful if we create content on our site acer.custhelp.com on the disk management section to help customers with these issues so that they understand what does what.

Maybe you are looking for