Acer Aspire E5-511 thought, it was too good to last. Laptop turns off when loading?

Similar Questions

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• Acer Aspire E5-511-P7SJ reinstalled with windows 7 32 bit. Brightness of the screen does not

  I use Acer Aspire E5-511-P7SJ windows.81 preinstalled. The system had Intel HD Graphics. I formatted the system and load windows 7 32 bit. After windows 7 installed, I am not able increase or decrease brightness.

  How can the problem be solved?

  At present, the system has Standard VGA Graphics Adapter. I tried and it driver from this link https://downloadcenter.intel.com/ /23763/Intel-HD-Graphics-Driver-for-Windows-7-8-8-1-32bit HD graphics card

  When installing, it says "the computer does not meet the minimum requirements to install the program.

  What are the solutions? Please advice

  Hello

  Have you tried the Intel HD graphics driver for Pentium N3540:

  J1750 processor Intel® Pentium® /J1850/J2850/N3510/N3520/N3540 N2805 / N2806 / 2810/N2815/N2820/N2910/N2920/N2940 n with Intel® HD Graphics

• Screws missing Acer Aspire ES1-511

  Hello so I have an Acer aspire es1-511 they are outside of the merits of the case and I'm missing about 3 screws do you know what size are they? or where I might be able to get a few screws of this size? I understand that you're not suggesting 3rd party but I really need to do. A little, I prefer to keep my thanks own technolagy for that meet. also do you know if a M2.5x8mm screw would hold? I am from, Alberta, Canada

  Can be here but 50 pieces for 6CAD + free shipping.

• Upgrading memory on my Acer Aspire ES1 - 511

  Hello, of course I could use assistance change memory on my Acer Aspire ES1-511.  It has 4 GB, but I really could use 8 GB

  
  

• Acer Aspire ES1-511 plugged in, not charging ~ ~ Orange flashing

  I have an Acer Aspire ES1-511 and the orange light (flashes charge) and when I unplug the charger and the laptop stops and custom lights unless I plug in.

  Also, when I plug it in, it says "plugged in, do not load.

  If someone could help me, it would be great!

  Unfortunately, you will need to replace the battery. I give you the part numbers of the original batteries:

• Acer aspire es1-511-c665

  I have an acer aspire es1-511-c665 laptop with windows 8.1 on the right side of the laptop has a cover of the device that will fake CD cd/dvd drive Bay.  can I remove this cover and open the acer to install a reader of cd/dvd internal of my toshiba satlight lap top which has windows vista and if I can install the toshiba player what other equipment or drivers will be I need to do.

  You can install the optical drive with below mentioned specifications.

• Acer Aspire E5 - 511. move the mouse/Touchpad cursor, but will not open other than McAfee programs.

  Just bought this laptop, original thought it was a big improvement on my Aspire 3 year!   Last problem after doing a full scan with McAfee is the touch pad or remote control will move the cursor but will not open other than McAfee programs.   The Windows (bottom left) symbol does not illuminate when the cursor is over it and I am unable to use the windows key + C to get the bar of charms.

  For the background, I couldn't install windows updates since I got this computer, two days, so do a scan to look for the reasons.

  Thanks for your suggestion Acer-Justin.   Sorted by switching off / reset the keyboard.   Problem sorted update using Microsoft who has found a problem with the update system and then installed Windows 10 - everything looks ok at the moment.

• ACER ASPIRE E5-511-ADD DEVICE USING THE UEFI BOOT.

  Hello. I bought a laptop Acer Aspire with Linux preinstalled E5-511. I want to install windows 8.1.

  I created with Rufus TPG bootable USB flash with win8.1 image. UEFI mode the laptop does not recognize the USB, I have turned off secure boot, put the USB - HDD on the top of the boot priority but in vain.

  In legacy BIOS mode, I can boot and install windows, but the touchpad mouse does not work, only the USB mouse functions.

  How can I add UEFI boot USB flash?

  Thank you in advance.

  You did right, but sometimes the USB interfaces are not recognized by the system, I had some problems with a pair of USB pen which has not worked as a boot device, but another one worked smoothly.

  don't forget to have your HDD or USB pen in FAT32.

• I have an Acer Aspire 5542. Since I was Windows 10 MyWinLocker Yo-Safe will not open.

  Hi, I have an Acer Aspire 5542.  It came with Windows 7, and had MyWinLocker Yo-Safe pre-installed.  Since I upgraded to Windows 10 MyWinLocker Yo-Safe will not open.  After I entered my password in the window of MyWinLocker Yo-Safe he said Yo-Safe is open in a small window pop up at the bottom right of the screen, but Yo-Safe will appear in the window of this PC, and the overview of the tray icon still says it is closed.

  I found the answer: open an administrator command prompt and then type in: sc mwlservice start

• Acer Aspire V5-561PG turns off when the cover

  I got my Acer Aspire V5-561PG for about 5 months now, and there have not been any problems with it until recently. It all started after the last Windows 8 update.

  Whenever I close the lid just off lapop. I changed the sleepmode/energy-economy-mode settings (they are in Swedish to me so do not know the exact translation) but it stops again. The only thing that has worked has been updated with the 'status quo', but I don't want that.

  It almost seems like the laptop goes down, it takes very long for it starts after I opened the lid. He also liked to before starting from stop manually.

  I don't know what to do, advice or solutions?

  I did some research and found that apparently USB devices such as the mouse can make the crash, so I made a few changes it. I've also updated my graphics card drivers later and now this isn't down more. Don't know which of the two did, but I'm just happy it works, thanks for the help anyway

• When I pick up my Windows 7 Acer Aspire power, the computer turns off when the battery shows fully charged

  I HAVE A CHILD OF 1 YEAR ACER ASPIRE WITH WINDOWS 7, WHICH IS CONNECTED TO BE WIRELESS. BUT WHEN I GET MY COMPUTER TURNS OFF THE POWER SUPPLY CORD. THE BATTERY SAYS FULLY CHARGED. IT WORKED AND NOW IT WONT. SOMEONE CAN ME SAY WHAT THE PROBLEM IS. I EVEN WENT BACK THROUGH HIM WITH DEFAULT AND IT DID NOT HELP.

  Hello

  Are you aware of any changes made to the computer, before the show?

  I suggest to change the power management and check for the issue.

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  If the above does not help, I suggest you to contact Acer support for assistance.

  http://support.Acer.com/us/en/default.aspx

  I hope this helps.

• Problems of compatibility of memory on Acer Aspire E5 - 511

  Well it seems cannot use my ram on this laptop for some strange reason?

  Tracker

  Hynix HMT451S6AFR8A-PB 4 GB PC3 - 12800 DDR3 - 1600 MHz / Hynix HMT425S6AFR6A-PB 2GB PC3 - 12800 DDR3 - 1600 MHz

  Also when tried two of them into the two slots gives me a black screen or ram that needs to be the same at the start, that they the same as only 2 GB and the other is 4 GB...

  Also tested this ram on another system and perfectly good bed? Seem, acer should do another update of bios on storage medium?

  Looking up from your system. I find it is not supported to run different Ram size. even if everything matches in addition to the size...

  So 2 + 2 or 4 + 4 would work. and also a simple 8 to a maximum of 8 supported...

  Not everything is done the same thing. Until a computer may be able to do another may not.

  Hope this helps some

  James

• Acer Aspire 15 511 - P4L7 E laptop touchpad not working do not at all.

  Hello, I posted here about this problem before and I still can't fixthe touchpad. I use a wireless USB mouse to move the cursor and it works well. I tried to download the latest drivers and pressing fn + f7 to activate the touchpad, but it does not work. The touchpad is sgow upward in the settings. The mouse is listed in the settings menu. I don't know what to do now, unless I pulled out my laptop to the computer store. All advice is appreciated. Thank you.

  Look in the Bios, if the touchpad is advanced and then place it on normal or something like that.

• Acer Aspire E5 - 521 AMD 1.8 GHz Turbo 2.4 GHz seems slow when it should speed up

  I have updated the laptop to Windows Home 10.  I noticed that the speed of the CPU drops to 1.7 GHz .99GHz whenever applications run.  However, when you are sitting idle, it will accelerate up to almost 2.4 GHz (what?).  I noticed when editing a video clip.  I know that this is not a unit of video editing, but he can do light edition of little video clips.  CPU has dropped to as little as .99GHz for rendering and never got higher than 1.6 - 7GHz. Then I noticed that it does this on all the tasks that I run, using Windows Media Player, surf the web, install software, copy files, etc.  What gives?  CPU cycles to the top when I stop doing anything and just look at the performance of the processor.  It's a Quad AMD6, not a high-speed CPU but it should do with the turbo function, better cause when I do my editing, it is difficult to swallow this pill that he not gases upward but throttles down and little import if it is plugged or current alternative.  Time remain somewhere between 41 - 53 c.

  I followed your advice and contacted the Acer Support.  I was told that it was in my power settings.  I had to choose the advanced option under the edit window Plan and in the drop-down list choose High Performance settings.  REP said this should solve the problem.  So I'll try that. So unless this does not work for some reason, I guess it's a closed question.