Acer Aspire One will be not run Office Starter after having uninstalled windows 10

Similar Questions

• Acer Aspire One D270 does not turn on!

  Have an Acer Aspire One D270. I've had for about 4-5 months now. Today it suddenly has stopped and it won't turn on. I left for a few hours but nothing yet. I thought it was a battery problem but the charging light does not turn. I know for sure, it is not the charger. Please help me! Thanks in advance!

  [Moved from comments]

  Nevermind found the solution...                                                                                                              Follow the steps below. (Please be careful when you handle the electrical components of the computer such as batteries and power adapters)

  • Remove the battery and hold the power for a few seconds (drain any remaining power)
  • Turning on the computer without the battery with the AC adapter is plugged in.
  • Wait a few seconds and then reconnect the battery

  After a few tries the computer should start normally supported. The amber battery stops flashing and turns green when fully charged.

• Reinstall Windows XP on Acer Aspire One - computer did not come with a recovery CD

  How to use the product key that came with my Acer Aspire one to reinstall Windows XP without CD?

  Hi MariaMouzes

  You can restore your computer configuration using the procedure described in the link below.

  How can I restore my system using eRecovery management program?

  http://Acer.custhelp.com/app/answers/detail/A_ID/12869

  Or you can buy the recovery media by hint at the link below.

  https://store.Acer.com/store/Acerna/DisplayDataValidationServicePage

  Good luck.

• Acer aspire one P531h does not illuminate after power to the top

  My netbook aspire one P531h, running on Win Xp 32 bit, shows a black screen only after power on and the power led remains lit steady green. Problems started awhile the 'evil' netbook to start.  After one or 2 low power it started again. Then the battery fails to charge beyond a certain level and now it will fail to start.

  I search the web and forum and there seems to be a BIOS problem.  I found the instructions on how to flash/upgrade to day other models but not this one.

  I tried:

  Method of draining the power as described by lowendguru on youtube and eslewhere.

  I downloaded the new BIOS software, but missing instructions for Flash for this model.

  Looking forward to hear from you.

  Hello

  I sent you a private message. I can't help you more.

• My Aspire one 753 does not connect to WIFI after using the Recovery Manager.

  After using the recovery on my Aspire one 753 inbuild Manager my phone doesn't conect to wireless internet. I think the problem has something to do with the drivers, but I'm not sure. need help ASAP

  I used the live usb of ubuntu when I discovered that my network card was acutally one of Intel wifi card. https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24217&lang=eng&ProdId=3316. Thank you very much for your support on the issue

• Error - the file awduu36e.sys is not found. Press a key to continue, not able to start after having done the repair of the system on the XP machine.

  Original title: the awduu36e.sys file is not found.

  After a repair of windows XP SP3, I receive, at startup, the message "the file awduu36e.sys is not found. Press a key to continue"- I can't press a key because the keyboard is not recognized or active at this point in the trunk, although I can access the BIOS earlier in the cycle. I tried to boot from the CD from Microsoft but get the same problem. -Any ideas please?

  "cadastra" wrote in message News: 80941b1a-7 c 69-4f05-a259-560357b7f291...

  Hi Kim,

  First of all thanks for respone and sorry for the delay to return but am in Australia so bit of a lag in time!

  OK the sequence goes as follows:

  1 gigabyte MB BIOS screen - at this stage sensitive keyboard and I can access BIOS OK.

  2. new screen - PCI resources; Checking DMI Pool etc. ;

  3. new screen - "Please choose which startup option:

  -Windows XP Home Edition

  -Installation of Windows XP.

  and countdown etc. - from this point in the sequence of the keyboard does not respond so cannot select the OS and inadmissible F8, then highlighted option default selected that is configured.

  4. new screen - "check you computer hardware configuration...".

  5. new screen - "the file awduu36e.sys is not found. Press a key to continue. "

  As the keyboard is unresponsive after the BIOS screen I have no way of influencing the order above.

  Other relevant points:

  -When you make commissioning/repair day I received the message to halfway through - "awduu36e.sys file is not found" and the option start over or ignore; after another attempt to a couple of times I chose skip so I guess that I got myself into this mess. What is awduu36e.sys anyway?

  -My copy of Windows XP Home Edition SP3 OEM is and has been installed when I got to the machine, so I think that some repair options are not available for me in any case.

  Again thank you very much for the reply and any help you can provide,

  Kind regards

  Fraser

  Looks like you are leaving it too late to use F8 (must be before the OS options appear)- and you have a partial installation of some versions of Windows in progress seeking the file on a CD.
  
   
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• My acer aspire one will not identify new advanced 5G wifi modem. How can I fix it

  The machine of love but just discovered he can't communicate with new advanced5G wireless modem without ethernet cable. Is - fixable? I know this is an older machine but is ideal for travel. I would also like to load windows 10 when they are available for this machine. Help?

  dlomore,

  You must install a new wireless card that supports this connection of 5G, it is not a limitation of the software, in this case.

• Acer Aspire One 522 does not start

  I replaced the RAM of 1 GB in my 522 an Aspire. After that the netbook starts not more. Only the blue power led flashing and I hear the fan. I can only turn off by pressing the button for 5 seconds. The screen is black and I can't access the bios. Now the laptop no longer starts with the original module either. I'm looking for a way access the bios, but I found nothing for this model on the internet. Hope someone can help me. Thank you

  Finally, I took a better look at the RAM module and the slot. Although I replaced the modules many times it seems that they were not properly placed in the slot. In any case, it works with my new 2 GB module.

• Built in mic on acer aspire one does not

  The microphone on my acer aspire one netbook does not work. I am running windows XP on the netbook and had this problem once before some time back, but can't remember what the person tech told me to uninstall that does the job all of a sudden again. I use also the audio if it helps Realtek HD. I tried several times to update the drivers and reinstall the software from the acer site, it does not work... any suggestions?

  Hello

  Thank you for your message.

  I see that you are facing problems with the built-in microphone.

  Let's not worry! I'm here to help.

  Quick questions:

  1. what exactly happens when you use the built-in microphone? You receive an error message?

  2. What is the status of the device in Device Manager?

  Check out this link to learn more about device manager:

  By using Device Manager

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_dev_mgr.mspx?mfr=true

  Let's try the following and check:

  Method 1:

  We will adjust the volume of your microphone and check if it is set as default.

  (a) right click on the "speaker" icon located on the bottom right corner the screen of the taskbar.

  (b) click on sounds, click on the recording tab.

  (c) click Microphone, and then click Properties. (Note to make sure that this work appears under Microphone. If the job does not appear, click on Microphoneand then click set as default.)

  (d) in the Properties of the Microphone dialog box, click the custom tab.

  (e) select or clear the check box Amp Microphone .

  (f) click the levels tab.

  (g) set the slider for the volume to the desired level, and then click OK.

  (h) click on OK to close the sound dialog box.

  Method 2:

  I would also say that you update the drivers for your Microphone and looking for the issue.

  See this link for more information:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  I hope that helps!

  If you need help on this problem or any question of Windows in the future let us know.

• Acer Aspire One model ZA3 (WIN XP) needs updated drivers

  I'm still enjoying my Acer Aspire One manufactured in 2009 running Windows XP Edition family, but am running into the faults caused by ancient drivers.

  A single analysis indicates that I need a driver updated GlobeTrotter MO40X but where and which?

  Acer computers can update their own drivers somehow?

  Thanks to anyone who can help me

  Where can I get information on the model ZA3?

  It's actually an Aspire One AO751h.  The drivers are available on the page drivers.

  I don't know what you are "scanning", but the "GlobeTrotter" MO40X is not a driver for an Acer system package.

  All the available drivers are on our page drivers.

• BlackBerry Curve 8330 Smartphone - Attached Modem with Acer Aspire One Netbook?

  Someone at - there any experience or knowledge on the use of capacity of the Curve 8330 as modem attached with Acer Aspire One 8.9 "netbook that uses the operating system to Windows XP Home with Intel Atom processor and a 160 GB hard drive and an external drive for CD/DVD drive?

  My Alltel 8330's works very well with my laptop Compaq regular curve, but it is aging, and I consider this little well revised Acer Netbook.

  Thanks in advance!

  StPeteMark

  USB modem should work with any Windows 2000 / XP / Vista.

• Windows 7 will not update on an Acer Aspire One 722

  Hello, I have an Acer Aspire One 722 - A0722 - 64-Bit - I used the laptop and installed Windows 10 on it and it came to a crawl.  I decided to reset the computer to factory settings.  He succeeded, however, I can not install the updates of Windows.  I am running Windows 7 Home Premium with Service Pack 1.

  I tried to install updates for the first time without success and tried all the solutions I could find online.  I searched through forum after forum and tried all of the solutions that I found and not luck.  I installed several downloads, as recommended by Microsoft and not solutions.  I had subsequently to error code 8008005 and 0x8024402C and 0x8024001e.  I tried again the solutions and nothing has worked.  Most of the downloads that I did from herre: https://www.microsoft.com/en-us/download/windows.aspx

  I finally install CCleaner and updated to Explorer 11 I downloaded directly from the Microsoft Web site.  Who succeeded.  Nothing else has.

  So, I wiped out the computer again and reset to factory settings and am at square one.  I installed NOTHING else at this point expect try Windows updates.  All I get is the progress monitor to continue to operate.  It was 'running' and research updates for nearly 30 hours and nothing.  It still reads ' check for Updates ' and nothing else.

  Any help would be appreciated as I know what else to try.  This seems to be a common problem with no real solution at this moment that my search Google told me.

  Two screenshots are below.  Thank you for any help or advice.  At this point, the computer is basically unusable and it's very frustrating.  I spent hours and hours and hours and nothing.

  Thank you all and well be.    Brad

  

  

  Hello

  In fact, I found a solution that works!  I found this on another forum... Here is the solution...

  Hi I had this same problem, but it can be fixed easily, fist you need to do this update https://www.microsoft.com/en-us/download/details.aspx?i... There for 64 bit, before this, you must disconnect your wifi and LAN and uncheck the box you run internet settings where will be automatically connect when you start windows, and then restart your PC. Once the back is operational, run the update you just downloaded (make sure do not connect to the internet until the update is complete.  Reset.  Now that you have made, you must update the update here is the link to the DLhttps://support.microsoft.com/en-ca/kb/949104. Now, when it comes to restart your PC and go to update and this time it should find updates, can still take a little time, but usually get fist couple in 10 to 15 minutes.

  PS - It analyzed more than an hour before he found updates and started to download. Yes!  It worked... I also downloaded the downloads on a flashdrive from my desktop PC and installed on the Acer from the USB key.

  Thank you and well being.  Brad

• I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

  I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

  Windows Developer Preview: OS General Questions:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads

  The Developer Preview of Windows is a pre-beta version of Windows 8 for developers. These downloads include beta software that may change without notice. The software is provided as is, and bear you the risk of using it. It may not be stable, work properly or work the way that the final version of the software will be. It should not be used in a production environment.

  Netbook screen

  If you have a netbook with a screen 1024 x 600 Metro applications will not work. 1024 x 768 is the minimum for Metro applications.

  Several people have reported that Metro apps can be run if you connect an external display that is 1024 x 768 or more.

  You can try this modification to allow higher resolutions:

  http://www.netbooklive.com/how-to-get-better-resolution-on-your-standard-10-inch-NetBook-2772/

  BIOS - disable hybrid startup:
  http://www.sizzledcore.com/2011/04/21/enable-disable-hybrid-boot-in-Windows-8-for-faster-startup-time/

• Acer Aspire One Webcam not working not

  I have an acer aspire one model 10 "w / built-in... webcam I bought in July 2009, came from model installed with xp... I have recently upgraded to windows 7... Acer will not support me because I've updated and they insisted I get the technical assistance service... ridic!... Device Manager shows webcam and States that it works properly... She also pilot States updated... I uninstalled it restared and reinstalled it, but this still does not work... I use to be able to click it open... now When I click on the photo, it just display information but no where on my computer I am able to actually open the device for photo purposes... quite frustrating to find the answer on the web... seems to be a lot of people giving answers or links to driver scan sites... no one answered this question apart from making guesses at random , who has been a loss of a lot of time... so actually has a real answer and who knows some instead of guess, it would be much appreciated.

  Best regards

  AcerOne

  Hello

  You run the Windows 7 Upgrade Advisor to make sure that your system will work correctly on Windows 7?

  Windows 7 Upgrade Advisorhttp://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx

  Check with the Acer's Support, their online documentation and drivers, and their forums.

  Acer - USA - Service and support
  http://us.Acer.com/AC/en/us/content/support

  Acer - drivers and downloads
  http://us.Acer.com/AC/en/us/content/drivers

  Acer - Community/Forums
  http://community.Acer.com/

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ============================

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  Vista references apply to Windows 7.

  You probably need to recharge the device drivers and any software control of the 'IF' camera, there is
  everything for Windows 7.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Acer Aspire One D255 - upgrade memory - I was told I could be upgraded to 2GB. A DDR3 4 GB will work?

  Went to the store to pick up a 2 GB and they were all, but the sales guy gave me a 4 GB DDR3.  The Geeks were all busy, and I had no time to wait, so I brought home and decided to research.  I find nothing on a 4GB for this model.  No one knows if it will make a difference.  They are apparently the same size. Now, I have windows 10 on mine and have need of more memory.

  The 4GB will not work and neither will DDR3.

  http://www.crucial.com/USA/en/compatible-Upgrade-for/Acer/Aspire-One-D255-(Intel-Atom-N450)-ddr2