Acer Aspire V3 - 772G monitor Glitch

Similar Questions

• Acer Aspire V3 - 772G - BIOS setup utility menus have disappeared

  Acer Aspire V3 - 772G - BIOS setup utility menus have disappeared

  I have install this laptop brand new, pre-installed with Windows 8.1 for my sister-in-law who bought it.  The installation went well BUT the 16 GB USB device I bought such as advised by the literature of Acer to store the recovery partition was not large enough, 14.4 GB physical capacity.  Acer the book says to use a 16 GB or more, so I did.  I naively thought that a USB key which has been marked 16 GB would be appropriate.  Not the case.  I had to buy a bigger but am still waiting for delivery.

  So I decided to any HARD drive to save the work I had done, but found only the Acronis Backup and Recovery DVD would not start the image.  I went into the utility configuration and adjusted the start parameters to inherited and modified device priority.  Acronis wouldn't so I did not continue.  I went back into the configuration utility, use F9 to restore the default value and to my astonishment that the DUAL boot option was now gone and Windows startup option was also gone.

  This means that £800 this laptop is now unusable.  The installer standalone reconfigured without warning.  Nowhere is there at - it advice or advice do not use the Setup utility when it erases the features that cannot be recovered by using F9 to restore the default configuration.  If this isn't a serious design flaw, I don't know what is.

  I am deeply worried because the idea of a BIOS setup utility behave in this way seems so unlikely that I wonder if anyone will believe me.  How are the Setup utility has been designed to self-harm like this?

  Your suggested action works!  Thank you very much.  You saved my life.

  loungehake

• Keyboard does not work on Acer Aspire V3 - 772G

  my keyboard started acting weird for a month ago. my keyboard sends several keys on my laptop if I press one button, tab, esc, caps and the 1 button. for example: if I press a, I get an axcfn,. / ; ALT is also active. as it's rather boring, the tab send me sleep mode and esc activates flightmodus (great when online games). somehow, I got to fix this temporary when restarting or gently smashing into the keyboard (I tried to clean the vacuum it, but who do not have too).

  Well, this morning have these keys decided to stop whatever it is send to the laptop.

  someone at - it an idea of what might happen and how can I solve this problem?

  Thanks in advance

  Peter

  Hello Peter,.

  1. you can check on the Acer system information page (info from Acer-Justin).

  2. I would like to try to ""Load the default values of optimazed"or"Load default settings"in the [F2] bios Setup utility»

  3 NX. M8SE:.018 - Aspire V3-772-G-747a121TMakk (model NL?)

• BIOS update failed on Acer Aspire V3 - 772g wth core 5 Intel and Nvidia Geforce GT 750 M

  Hello

  because twice the problems encountered during the 2 major upgrade of my windows 10 family last week and 6 months ago I decided to check my Bios.

  Then I ran Windows 10 Familly and downloaded the BIOS_Acer_1.13_A_A.exe file from the ACER support site.

  My data is backed up. So no question about it.

  I've run this file and the PC has restarted.

  Surprised but horrible, now I get these messages in the following order:

  

  

  

  Welcome to help me. I don't know how to get back on the bios to factory?

  I don't know what to do?

  Good day.

  Henri

  Boot to the BIOS by pressing F2, and then press F9 and F10.

  Check if you are able to start Windows 10.

  If it isn't

  Enter the BIOS again by pressing F2 and go to the Startup tab, check if a the Legacy value, if so switch to UEFI, press F10 and reboot.

• Turbo Boost Acer Aspire V3 - 772G

  How can I check turbo boost is enabled in new V3 - 772-G mobile computer with Windows 8.1? Intel Turbo Boost Monitor 2.5 will not work with processors of generation 4 i7 & EOL.

  Can you confirm turbo boost at 3.2 GHz is done automatically? or is it disabled by default?

  Go to the Task Manager (click right windows logo in the bottom left), if you see the speed of the CPU is more than what your basic indicated speed, then the Turbo works.

  

• Acer Aspire v3 772G no sound HDMI on TV

  Right, I have a picture on my panasonic TV but no sound via HDMI I installed different drivers of countless times and I don't see any HDMI option in the playback devices.

  I am thick and loading the drivers badly or is another problem with this laptop?

  like a mouse that will zip across the screen whenever you try and move the mouse to the right, he's going left...

  Earn 8.1

  so far I'm literally not impressed with my purchase of £600

  already tried to do a factory reset

• Aspire V3 - 772G weird fan noise after cleaning

  Let's start with:

  Acer Aspire V3 - 772G (Intel (r) ore (TM) 4702MQ-i7 CPU @2. 20 GHz, 8 GB Ram)

  I don't care:

  After noticing a slight decrease in preformance of games and use my laptop in general so I decided to clean the fans. As this laptop is almost impossible to open I decided to clean the easy way, to the breath of compressed air directly into the fan on slow breaths and infrequent. After a lot of dust in the system I turned on the computer laptop back only to hear this reading 'cd' - as the hiss of the left side of the laptop (where the fan is). Be worried, I could have broken something that I turned it off stright, and then again once realize there was not much i could do about it at this time.

  I worry that I have could have spun the fan to fast, the cause, the fan did not have this noise when I bought it new or before I cleaned it for this love. It was purchased in a shop online Norwegian (I live in Norway) to 2014-08-18.

  I thought I ask here before that I contacted the store or the support to see if it's just me an overreaction or if there is a real problem. So is quite normal or abnormal as the dust recently got cleaned?

  Thanks for reading my message, and I look forward to responses from you guys.

  -Raito

  I have blown many laptops and spun very fast fans and was never killed. I usually blow just so good. You could have dislodged something that doesn't blow out and rubs on the fan.

• Acer Aspire won't boot to the top! Help please!

  Hello! I really hope you can help me on that because I don't know what to do... so this is what happened: I was playing a game heard music etc. (laptop: Acer Aspire E1 - 772G). However nothing happened, but then 2 minutes after my laptop froze and I waited patiently. After some time, he said something I don't remember and at first there was a sad Smiley biiig [ ]. downstairs he said some .sys arrested or something, I don't know... However, I turned off my phone and he did it again. Normally there must be the Acer's Logo and a Slogan just after clicking the power button, and some quarters would begin to turn around. Well this time it was no small circles and I started worrying. After like 1 Minute of waiting my screen just blacked out and 2 seconds after the logo was back once again, but without the circles. Then a black and blue message popped up, which says: "boot device by default lack or failed to initialize. Insert the recovery media"(I don't remember the rest). Well what I have tried is the following:
  ALT + F10 (absolutely no reaction)
  F8 or F12 don't know (shows me the error Code and what to do. He also says to put in my Windows installation, which I did not. I don't have any recovery media)

  After the message appeared I pressed Enter, and there was a menu where I couldn't do anything. He only told me to press any key, if I put in any recovery media. As I said I didn't, so I just close the laptop. After that, I pressed the power button to restart my laptop... Well, it was the same thing. After that, I turn it off again and tried the things I listed before. I hope you can help me, quick if possible I need my laptop for many other things that are more important than to play haha ^ ^

  I look forward to a quick response,
  iSpextor

  try to boot to the BIOS by pressing F2 at startup, check on the home page if your HARD drive is listed.

  If it listed to go to the exit of tav and choose load setup default, press F10, Save and exit

  try to start

  If you still having problem with missing starting device, your HARD drive is probably dead or having some bad problems; If you are still under warranty, please contact Acer support.

• Acer Aspire 6930 no screen, not even on external monitor

  One of my clients gave me an Acer Aspire 6930. He said that he was looking at internet porn and he got a message that he had to pay $300.00 to unlock his PC and it stopped on him (see the ice virus?). When I tried to bring up the laptop I have nothing on the screen to indicate to all life. But the disks rotate. I tried to boot from a Windows XP disk and still nothing on the screen. I tried FN + F3 and FN + F5, FN + F6 to no vail. I tried video routing using a HDMI cable and by repeating steps and received a 'no signal' on the external monitor and I tried the same process using a VGA cable for the external monitor and still "no signal". I tried to Flash the bios with a modded one since I don't know how to seprate the exe of the bios with insertng hex editor the usb flash drive and pressing the FN + ESC, and then press the power button and now the keys FN + ESC 5 additional seconds. I am now completely at a loss and could use very little help.

  Thank you

  Definitely one of our best posts.

  I'm sure you already said your customer to upgrade its anti-virus software and stay out of the porn sites.

• Acer Aspire ARE 15 sound and glitches of RAM

  Hello world!

  I have a laptop Acer Aspire ES 15, which is only 3 months old. I was dealing with glitches in the sound which became worse and worse, making also the RAM to overload and the whole system to glitch.

  I uninstalled and reinstalled the sound drivers and the problem seems to have disappeared for a few weeks but now there reapperared and, like last time, he becomes worse and worse as days pass...

  What can I do to fix this please?

  Thanks for your help!

  Nope, BIOS should be updated only once if more recent versions are not available.
  Once fixed with a BIOS update problem (crossing fingers) re will not appear.

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• Windows 7 will not update on an Acer Aspire One 722

  Hello, I have an Acer Aspire One 722 - A0722 - 64-Bit - I used the laptop and installed Windows 10 on it and it came to a crawl.  I decided to reset the computer to factory settings.  He succeeded, however, I can not install the updates of Windows.  I am running Windows 7 Home Premium with Service Pack 1.

  I tried to install updates for the first time without success and tried all the solutions I could find online.  I searched through forum after forum and tried all of the solutions that I found and not luck.  I installed several downloads, as recommended by Microsoft and not solutions.  I had subsequently to error code 8008005 and 0x8024402C and 0x8024001e.  I tried again the solutions and nothing has worked.  Most of the downloads that I did from herre: https://www.microsoft.com/en-us/download/windows.aspx

  I finally install CCleaner and updated to Explorer 11 I downloaded directly from the Microsoft Web site.  Who succeeded.  Nothing else has.

  So, I wiped out the computer again and reset to factory settings and am at square one.  I installed NOTHING else at this point expect try Windows updates.  All I get is the progress monitor to continue to operate.  It was 'running' and research updates for nearly 30 hours and nothing.  It still reads ' check for Updates ' and nothing else.

  Any help would be appreciated as I know what else to try.  This seems to be a common problem with no real solution at this moment that my search Google told me.

  Two screenshots are below.  Thank you for any help or advice.  At this point, the computer is basically unusable and it's very frustrating.  I spent hours and hours and hours and nothing.

  Thank you all and well be.    Brad

  

  

  Hello

  In fact, I found a solution that works!  I found this on another forum... Here is the solution...

  Hi I had this same problem, but it can be fixed easily, fist you need to do this update https://www.microsoft.com/en-us/download/details.aspx?i... There for 64 bit, before this, you must disconnect your wifi and LAN and uncheck the box you run internet settings where will be automatically connect when you start windows, and then restart your PC. Once the back is operational, run the update you just downloaded (make sure do not connect to the internet until the update is complete.  Reset.  Now that you have made, you must update the update here is the link to the DLhttps://support.microsoft.com/en-ca/kb/949104. Now, when it comes to restart your PC and go to update and this time it should find updates, can still take a little time, but usually get fist couple in 10 to 15 minutes.

  PS - It analyzed more than an hour before he found updates and started to download. Yes!  It worked... I also downloaded the downloads on a flashdrive from my desktop PC and installed on the Acer from the USB key.

  Thank you and well being.  Brad

• Acer Aspire D255E turns on, displays on screen, then stops in a few seconds

  I just bought an Acer Aspire D255E with a cracked screen.  I tested it and it worked fine.  Replaced the screen with a new brand, and the result is that it turns on, shows the opening screen, flashes what looks like the screen you get when you stop abnormally, then powers down.  It if also out tension in all the time even though I have F2 in the BIOS.  Anyone know what is happening here?

  Hello

  One of the panels for the Aspire One D255 2677 LCD part numbers is:

  LK.10105.002 - AUO B101AW06 V1 LF 200NIT 8MS 500: 1---> you have the right part.

  You wrote:

  "I forgot to take the battery when I first changed the screens, but it does not appear that should hurt anything."

  Unfortunately, Yes. If you have a small power surge when you plug in the Panel, you have damaged it.

  You can connect an external monitor or an LCD TV using the VGA port. I hope that you have not damaged the neat chipset.

• Cannot connect computer laptop acer aspire 5630 screen via a cable vga to tv screen

  Original title: cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

  Cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

  Hello

  1. If it works well before?
  2. Did you of recent changes to the computer before the show?
  3. What happens when you connect the VGA cable to TV to the laptop screen?

  I suggest to refer to the article and perform the steps mentioned there.

   

  How to configure and use multiple monitors in Windows XP:

  http://support.Microsoft.com/kb/307873

   

  Reference:--

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=S5itWxIFacJ

   

   

   

• Acer aspire screen shows nothing when I turn it on

  When I turn on my computer the screen shows nothing except some clear blue... before this happened I was check some flash drive and check out what they had and remove them safely, but on the 3 drive flash the screen started showing the random colors at all goes horizontal like a rainbow... .then I had worries and immediately shut down the computer

  Acer aspire 5742z

  window 7

  

  Hello

  You have the same problem with an external monitor or LCD TV using VGA or HDMI port?

  [Fn] + [F5] - display toggle: switches display output between the screen display, external display (if connected) and both.