Acer E5 - 571 i3 4030U 1.9 ghz 500 GB HDD 4 GB memory

Similar Questions

• BIOS ACER v3 - 571 G problem!

  Hello Acer first of all, my English is bad. I have a laptop ACER v3 - 571 G with i5 - 3210M 2.5 GHz and GT 640 M + 8 GB of RAM and I am very disssapointed with my laptop.

  ACER with 2.21 bios is the worst bios that I've ever seen. Laptop has 85-95 C with this bios and it stops at stake, in surfing, any judgments just randomly.

  There is no option in this ridiculous BIOS, I can't set the fan speed and I can't disable disk or turn it off, and I can not start USB because the laptop does not react on F2 at startup only when I restart, but then, may not realize that it is the USB into the slot.

  1. the drive is 100% its first use 2-4 minutes.

  2. very unstable with very bad BIOS Acer laptop and I had Flash the BIOS of the random guy and the book it is 1000 times better as with Acer bios!

  3. the battery does not work with BIOS Acer but it works with modded BIOS.

  4. I paid 250 EUR for the new motherboard because the laptop is turned off and does not start again. The service said it was 'the unknown liquid' to the motherboard.

  So, now with the new motherboard after 3 months, he broke again and it randomly stops himself. It is not because as warm-ups it stops when I open video-game-chrome or something.

  What can I do? I really don't want to send the laptop to the service they will again tell me that it's my fault because they can't repair or accept my guarantee.

  Is this normal for 680EUR + 250 with new mothetboard? I thought that Acer is a solid company by comparing with HP/ASUS, but I made a huge mistake.

  THANKS FOR THE QUICK REPLY!

  This is what I said, turn off fast boot and you can access BIOS whenever you want. With this option enabled, Windows does not full stop, just a mix between the Hibernate and shutdown. Here is the explanation of this process, and how to disable this - http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html after that you should be able to access BIOS even when you turn off your laptop. This is normal with Windows 8 and keep in mind after that this system will begin in a few seconds more.

  Also, I think you should check your HARD disk because it may be corrupted, download CrystalDiskInfo and check it. If so, try to check for errors like here http://windows.microsoft.com/en-us/windows-vista/check-your-hard-disk-for-errors if it was caused by areas defective Windows needs to get rid of it.

  I do not know what causes overheating, I've got 2.21 BIOS and no problem.

• Windows recovery does not. Acer Aspire 571 E1

  Hello

  I have an Acer Aspire 571 E1, then I installed windows 8 pro upgrade to 8.1 pro, now my ram show I have 6 Gig of ram but available only 2.45.

  I tried to reinstall windows, but he used, I tried using recovery of acer (at start up press Alt + F10). nothing happens

  Even when I tried to install I have hollow windows itself, after I get the product key, he asks what I want (Nothing)

  Then, it shows that there are things I need to fix, but there is only a blank page that shows nothing.

  I also tried to boot from the disc, but when I press install now, an error, saying that I entered the product key is not valid. but he never asked a.

  No idea how I might solve this problem.

  Kind regards

  Philip Pienaar

  Hi, sorry, but a friend of mine contacted me on the problem, it has something to do with the Windows I have installed.

  My windows came with the laptop must be resettled and not to try to install windows 8 pro.

  Sorry if I wasted your time, but thank you.

  Kind regards

  [private under the leadership of life]

• My Acer Aspire 571 e5 allows me to connect, but then I get a black screen and I see my cursor

  Hello

  So my Acer Aspire 571 e5 which ive been using for about 3 days just had a windows update. Now, it starts well but I get a black screen when I connect. However, some programs are always able to see and popup randomly. I also tried to go into my bIOS, but it asks for a password that I don't know.

  If you press CTRL + ALT + DELETE you are able to open the Task Manager?

  or try this:

  (1) once you are on the screen of login password, press on and hold down the SHIFT key and click on the power icon (lower right corner of the screen) and restart your computer... (Remember do not type a password)
  (2) you will get advance options. Click on troubleshoot---> advanced---> start---> restart settings---> and select SAFE MODE WITH NETWORKING

  (3) once in office in safe mode, open Device Manager, click on the video card, right-click on it and choose unisntall

  (4) restart and check if it works

• I have Acer E5-571. After the closing, I long press on button / stop

  I have an Acer E5-571 with Windows 10. After that I stopped it my laptop screen goes black. When I want to turn it on again it does not react to the mouse, the keyboard or pressing the power button. I have to press and hold the power button to turn it off, and then only I can start with a push of the power button. Pease help

  Sorry your having problems with your computer... Did you do any type of hardware change? Moved things around the power button which can be moved to the location of it... If not. Try this...

  Remove all items from the power of the computer cord, battery and charger, unplug everything that can be pluged in it. Press and hold the power button for 1 min... After that back things together and try and see if that helps at all!

  James

• I have an iMac 3.06 GHz with only 4 GB of memory.  During last two weeks, whDurin the past two weeks, when I click on 'Edit', it does not hold the menu drop down.    Need my Mac 'cleansing' and how do I get rid of unnecessary files?

  I have an iMac 3.06 GHz with only 4 GB of memory.  During the last two weeks, when working with documents, buttons on the desktop did not have in the drop down menus.    How can I get rid of unnecessary files and wipe the hard drive?

  Drop down menus stay open at other times? Have you tried another mouse? More information please write an effective communities of Apple support question

• Laptop Acer V3 - 571 will not get increased from 22% of the anniversary "Update" for Windows 10 part of the installation

  I have an Acer laptop V3-571, initially w / Windows 7 Home, which I've updated to Windows 10. Site Acer says that this laptop will support the 10 anniversary Win update.

  Tried to download the update of the anniversary online, but came back to win 10. Switched to Windows Media Creator for the next download attempt, I uninstalled my avast! Internet security. Back in return once again. Then reused Win Media Creator (after I deleted also Malwarebytes Anti - malware & also Anti-Exploit SuperAntiSpyware & Malwarebytes. After fully downloading birthday update (Win 10 AND updates), came after new Win 10 and 22% of updates. And here AGAIN once I had turned off the Bluetooth drivers, I have downloaded the update of the birthday & again once the mark of 22%, the updates to the new download to win 10 birthday, my machine back the previous Win 10.

  Someone at - he heard of this? Any suggestions?

  What's the brand of 22% the machine restarts (which is the second restart during the installation of birthday) and shows that my machine is back to the previous version of Windows?

  Thanks in advance.

  To clarify: after the anniversary update all downloads without problem, the anniversary part of Windows 10 installs without problem. Then "Updates" to begin the installation, at the helm of the 22% of these "Updates" install, the machine restarts and returns to the previous installation of Windows.

  SOLUTION: Finally, yesterday, I downloaded new drivers for Bluetooth USB Module and Intel(r) HD Graphics 4000. In addition, w / my free all search app, pulled up to Windows.old and renamed Anything.old (read on a forum that helped rename Windows.old with any word to replace the word "Windows"). Whether updated drivers and/or the name change, the downloaded Windows Media Creator & the birthday. installed update w / no. HARM my computer or any partition, including the partition w / Ubuntu. End

• Windows Acer v3-571 2012 new updated checked all 10 drivers on wifi and bluetooth does not

  I have all ways been an Acer since 2004 my Aspire 2012 v3-571 worked well windows 8 8.1 now am windows 10 pro, but I can't find the drivers to run WiFi and bluetooth.

  I checked all your drivers on site for my model from 2006 to 2014 and the only driver that is in the 16/06/2015 is Realtek High DEfinition Audio.

  You can send Martin alieu were I can it please.

  never had this happen to me

  Thank you

  E.Taffa

  GOOD DAY MY FRIENDS, THIS IS THE DAY I LOOKED FORWARD TO KEEP FROM THE START.

  I WIPE LAPTOP WIN 8.1 AND NOW WIFI AND BLUETOOTH I HAVE TRIED TO NO DIFFICULTY PASS.

  WINDOWS 10 UPGADE WIN 8.1 INSTALLATION 174 WHILE I STARTED DAY THEN YUST BEGINNING UPGRADEING AS I THOUGHT IT CAN'T GET ANY WORSE AFTER UPGRATING TO WINDOWS DOWNLOADED 10 V3-571 2012 WE WIDOWS 8.1 HAS NOT, I CHECKED WINDOWS 10 EVEN I RELOADED TH YUST EVEN I WAS LOADING ALL MY APP AND THISWENT ISTALLING RESTART I CLOSED TOP PC YUST AND WENT OUT TOP PC OPEN BACK CAME I HAVE 2 LIGHTS BLUE AND 1 YELLOW , I CHECK IT WI - FI IS THE BLUETOOTH IS ON YOU, THE BEST.

  Best regards

  E.TAFFA

  PS show me how to give kudoo or what his name, I give the amount of maziment

• downgrade acer aspire 571 - v3 for windows 7

  Hello

  I am trying to downgrade an acer aspire v3 - 571 of windows 7 to windows 8? Anyone know how I can change the boot order to boot from a dvd or usb hd rather than the hard drive?

  See you soon

  Nice day

  1. you press "F2" when you switch on the device.

  2. make sure that you change the secure mode of UEFI in legacy.

  3 disable secure boot.

  4. go to start, press "F6" to take the optical drive to option 1.

  Kind regards

  FReeZA

• Acer Aspire E5 - 521 AMD 1.8 GHz Turbo 2.4 GHz seems slow when it should speed up

  I have updated the laptop to Windows Home 10.  I noticed that the speed of the CPU drops to 1.7 GHz .99GHz whenever applications run.  However, when you are sitting idle, it will accelerate up to almost 2.4 GHz (what?).  I noticed when editing a video clip.  I know that this is not a unit of video editing, but he can do light edition of little video clips.  CPU has dropped to as little as .99GHz for rendering and never got higher than 1.6 - 7GHz. Then I noticed that it does this on all the tasks that I run, using Windows Media Player, surf the web, install software, copy files, etc.  What gives?  CPU cycles to the top when I stop doing anything and just look at the performance of the processor.  It's a Quad AMD6, not a high-speed CPU but it should do with the turbo function, better cause when I do my editing, it is difficult to swallow this pill that he not gases upward but throttles down and little import if it is plugged or current alternative.  Time remain somewhere between 41 - 53 c.

  I followed your advice and contacted the Acer Support.  I was told that it was in my power settings.  I had to choose the advanced option under the edit window Plan and in the drop-down list choose High Performance settings.  REP said this should solve the problem.  So I'll try that. So unless this does not work for some reason, I guess it's a closed question.

• How to print a document? There is no icon to be seen from anywhere. My newly purchased ACER V5 571 is connected to the printer series HP 7310.

  I use a new ACER Aspire V5 571 computer. I downloaded the application forms to be completed & signed, but I could not print the document. There is no icons located anywhere. The toolbar help & other communications were no longer any help. Kindly help!... just exasperated.

  You will not be able to print until you install a driver for your printer.

  See http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=uk&dlc=en&sw_lang=&product=391182#N197.

• Problem of lights keyboard Acer vn7 - 571 g (Nitro)

  When you start Windows keyboard backlight is on. Although I previously turned off it with fn + f9. Shouldn't it do not forget to State?

  Solved.

  I removed the backlit keyboard cable. With the tutorial how disassembly acer nitro found with google.

• Driver power state failure Acer V3 571 G

  Hello!

  I use my Acer V3 for more than six months, and recently my computer started to plant several times gives me error: State failure driver. I read it's an incompatible driver in the cause, but I'm not sure. Sometimes when I watch YouTube videos, 360 p (my internet is slow). The video stops and then the cursor stops responding while the sound of the video continues. Shortly after, I find myself on a BSOD. How can I fix?

  What is your GPU and what version of your drivers. If you have updated your drivers when it started to happen probably you need to get them off.

  https://forums.GeForce.com/default/topic/389688/GeForce-drivers/NVIDIA-statement-on-TDR-errors-Displ...

  Check this too this is probably the problem with gpu drivers.

• Acer aspire 571 with intel graphics chip e1, dysfunction

  I bought this laptop on a roadtrip from 3 days ago. Its kinda go further, back to return.

  The problem started the second day of use.

  It most often occurs during playback of videos with windows media player, but sometimes when a game or just surf the web.

  The screen completely freezes and is distorted with stripes pixeled traveled horizontally, and a howling noise occurs at the same time, as if both the graphics chip and the soundchip chrashes.

  The laptop is totally frozen, and the only way to put an end, is to physically close the laptop by pressing the powerbutton.

  Ive scanned the hard drive, did a complete system restore, updated all drivers and so on.

  the only thing Ive done with her, me, is changed to mcafee to avast, deleted the norton online backup and installed steam.

  Who all work perfectly on my other laptop.

  I'm afraid that there is a hardware failure, probably the GPU-chipset?  But I m the announcement anyway, in the hope of a solution.

  Best regards / / Dennis

  Acer will honor its guarantee, but it might want to only he returned more closely where you bought it. Yes, it's a hardware problem, and it seems that more than one.

• Acer Aspire 571 E1 how to enter the BIOS?

  I want to install Windows 7. But I can't get into the BIOS. When I turn on the computer to just support Windows 8 even if I disable the power button when windows is running.

  I also tried to change for one SSD drive, but he finds no bootable option. How in the BIOS?

  Hello

  Please see the link

  http://Acer.custhelp.com/app/answers/detail/A_ID/27103/kW/UEFI

  Disable secure startup to change the boot priority

  http://Acer.custhelp.com/app/answers/detail/A_ID/27072/kW/disable%20secure%20boot