Acer G246HL monitor (UM. FG6EE. B01) - screen Type

Similar Questions

• Can someone tell me if the Acer H236HLbid monitor has a glossy screen?

  If not I'll buy one.  I'm not sure.  Thank you!

  It's like a normal touch screen. It's like the screens on most modern smart phones.

• 2309 m too big monitors for Native resolution screen.

  I have Windows 7 Home Premium on the Aspire m7811A PC (x 64). When I use my hdmi cable with my monitor and change the screen resolution to the recommended setting, which is 1920 x 1080 to 60htz, the Office extends too far, and I see all the stuff on the screen. I have to keep the resolution 1680 x 1050, so it can't. What can I do to fix this? I also have the latest player of my monitor.

  These are my pc specs

  Operating system
  MS Windows 7 Home Premium 64-bit
  CENTRAL PROCESSING UNIT
  Intel Core i7 860 at 2.80 GHz 27 ° C
  Lynnfield 45nm technology
  RAM
  8.0 GB Dual-Channel DDR3 @ 657 MHz (9-9-9-24)
  Motherboard
  Acer H57M01 (CPU 1)
  Graphics
  HP 2309 @ 1680 x 1050
  ATI Radeon HD 5770
  Hard drives
  977 GB Western Digital WDC WD10EADS-22M2B0 (SCSI)
  Optical drives
  HL-DT-ST DVDRAM GH41N
  Audio
  Realtek High Definition Audio

  Go to the menu of the monitor and do a reset. Try thelatest driver of monitor and thelatest ATI video card driver.

  Do you use a right HDMI to HDMI without adapters?

• I just bought Acer T232HL monitor but I can't its come to the monitor

  I just bought Acer T232HL monitor is it came with built-in speaker. I can't get the sound to watch

  SOLVED *.

  I found several possible solutions here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Windows-8-audio-through-a-HDMI-c...

  My solution was to re - charge the Intel Graphics Driver for my Core i7 Integrated GPU such as mentioned on page 4 of the above link.

• Acer h233h monitor display is not centered

  Hello, all the... I'm kendra,

  I have an Acer H233H monitor. The display is centered to the right. On a or an and eight inch. It covers some controls, I can't use them. I have no manual, either.

  Someone has an idea?

  Thank you

  Kendra

  Manual of pilots http://global-download.acer.com/GDFiles/Document/User%20Manual/User%20Manual_Acer_1.0_A_A.zip?acerid...

• NO SIGNAL alert QUICK / BLACK MONITOR Acer S242HL monitor

  • Acer S242HL monitor will light up and briefly displays "No Signal" before going black.
  • I plugged on the Dell PC (Windows 7 HP) with the Blue D - SUB cable, and both fittings are tight.
  • The new Acer monitor worked (connected to the computer of the store) when I bought it today.
  • The original Dell Monitor works fine, and I'm trying to use the Acer as a 2nd monitor.  When I try to set up my computer to use multiple monitors, the computer detects the 2nd monitor as "VGA display device.
  • (I have connected new Acer monitor to the PC with the DVI cable used on Dell monitor work, but the cord is all the points in the Center who gets taken them Acer DVI, so I'm not sure it's a good fit.)  It tightens, but still no signal.)

  What should I do?

  Easy solution - to a new power cord DVI.

• The two external monitors show the same screen

  original title: using 2 external monitors on a laptop using Dynadock U10 problems

  Hi guys,.

  I try to use two external monitors using my a Dynadock U10..., I bought because it says you can use two external monitors with it!

  I installed the drivers for Displaylink etc.

  I plugged both monitors to the Dynadock (one via the VGA input) and one through DVI. When I have my laptop open it using cell phone as main screen and extends the office to both monitors, but both monitors have the same screen. If I identify screens, the laptop screen is 1 'and the monitors are the two 3'.

  If I close the laptop (I put the settings to not do anything if the lid is closed) and select my monitor as the main screen, they still both have the same image and the settins wont let me go to another screen. If I identify the screens, the two screens are developed under the number "1".

  I use Windows Vista. My laptop graphics card is "ATI Radeon 3100 Graphics"

  Any help would be appreciated!

  See you soon,.

  Stu

  Your video card is not serious with this home solution 'USB '.

  Toshiba is your point of contact.

  However - to answer your question - as much as I know you cannot do what you are trying to do.  You can use both outputs monitor, but the results you see are what you would expect.

• What I need to know is the name and location of the executable that runs when you click on detect monitors in the menu screen resolution of windows 7?

  Original title: name/location of the executable that runs when you click on detect monitors?

  What I need to know is the name and location of the executable that runs when you click on detect monitors in the menu screen resolution of windows 7?

  Hello

  Your question is better suited in the MSDN forums. Please post your question in the MSDN forums.

  You can follow the link to your question:
  http://social.msdn.Microsoft.com/forums/en-us/categories/

  It will be useful.

• Since El Capitan update that I can't use my secondary monitor as a full screen preview on the first and after the effect CC 2015

  Since El Capitan update that I can't use my secondary monitor as a full screen preview on the first and after the effect CC 2015

  I also have this problem. I was told that it is a bug, they work.

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• Need Acer G245HQL monitor stand/mounts, where can I find them?

  So I looked on the site of replacement of parts, and I couldn't find any monitor type to search for. If there is a better way then please tell me, but if I could get the model No. For Acer G245HQL support, I can call the support and understand. Please note that I am completely new to this

  Hello

  1 here are the references of the models:

  • UM. UG5AA.001 - G245HQL bd
  • UM. UG5AA.002 - G245HQL bmd
    You can compare these with the first 10 characters of your S/N.

  2 here is the reference numbers of the stand (neck + base):

• ACER X223W monitor

  I want to remove my monitor X223W settlement and the related appendices. Is this possible? I am installing a dual screen system, and the bulk of the material that attached to the back of the monitor is a bit unsightly in this type of circumstance. Any suggestions where I might find an illustrated manual or something that could have a series of illustrations etc. ?

  Unfortunately, there is no disassembly illustrated manuals.

  You will have a hinge cover left and right support arm.  Remove them carefully.

  Remove the 4 screws under the hinge covers.

• 'Input not supported' with Acer AL2216W monitor

  I use Windows Vista Home Premium with Service Pack 2 in a system with an Intel D946GZIS motherboard and an ACER AL2216W LCD display panel. This system has worked well for over a year, but recently in a battle of two months with a problem of code 10, the screen would occasionally drain and display "Input not supported" in a small floating window. As a first step, start with F8 would allow the system to boot in a 640 x 480 window which would quickly find its native resolution of 1680 x 1050. But now it starts directly from the screen to 640 x 480 to the State banned in normal mode, make possible adjustments to display.

  I can still use this display Mode without failure, but find that Safe Mode display adjustments do not affect the display in normal mode. In addition, a panel of HDTV used as a monitor instead of the Acer works wonderfully in normal mode in 1920 x 1080, but display settings to a lower resolution made with it do not persist when Acer Board is restored. Finally, my system is no longer recognizes the Acer AL2216W, but use a "default monitor.instead." And I can not install the Acer in the Mode panel without failure!

  You can try to uninstall your display driver in Device Manager, then reboot. Check if the monitor is listed under Device Manager. Your monitor should be below or try to reinstall the driver using the procedure on the link in my first answer.

  You can then go to the support site for your computer manufacturer and download the latest display driver specific to your operating system. Look for instructions on how to uninstall previous drivers and install the latest driver.

• External monitor works but integrated screen is not

  Hello

  I have a model of Macbook Pro 13 of the retina (mid-2013) .

  A few months back the display has stopped working, but when I hooked to an external monitor everything worked as expected except the screen of course.

  I took it to the service center and a descent computer repair shop and they both said that display connection with the logic board is fried and they need to fix the logic board that retina display is fine.

  The price they are quoting is about $ 900, which is not fair.

  The logic card cannot be repaired?

  anyone else in a similar situation?

  If all the otherwise failed I think I'll delete the entire display of macbook. Someone knows how to do this?

  Thank you!

  Welcome to the CSA!

  Because of the tiny parts and connections on a logic board, repair is usually not an option. I don't say it can't be done, but it's hard to find someone who can / will work on resolder delicate bits on a LB (redistribution) without making a mess of labor law.

  You live in the United States? If so, ask about a "repair." Instead of working on the computer in the Apple Store, they send to Apple rehabilitation center where they pretty much fix everything what they find wrong inside (with the exception of the display unit itself) for a flat rate that is much lower than the cost that you quoted for repair in the store. I believe that the current price for this service is approximately US$ 315.

  The only downside I see is that the repair takes about a week, largely during the transportation to and from the depot.

  If you are not in the United States, ask anyway. I don't know what Apple has implemented for this kind of repair outside the United States.

• Satellite C50D-- Toshiba PC Health Monitor - can not get the type of Bios

  I've updated my Satelite C50D-A Windows 10 laptop that works very well.
  However, when I try to check Toshiba PC Health Monitor in hidden icons, it is a small box that appears who says: 'impossible to obtain the type of Bios' and the application goes no further.

  Y at - it a fix for this make health monitor work again?

  Concerning
  Roger

  Hello

  Update you the software Toshiba after the Win10 upgrade?
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  The Toshiba Health Monitor and other software like system TOSHIBA driver should be updated to compatible version Win 10