Acer h233h monitor display is not centered

Hello, all the... I'm kendra,

I have an Acer H233H monitor. The display is centered to the right. On a or an and eight inch. It covers some controls, I can't use them. I have no manual, either.

Someone has an idea?

Thank you

Kendra

Manual of pilots http://global-download.acer.com/GDFiles/Document/User%20Manual/User%20Manual_Acer_1.0_A_A.zip?acerid...

Tags: Acer

Similar Questions

  • external monitor display resolution not as an option

    I try to have an external monitor for MacBook Pro (the Captain). While setting up, I couldn't find the proper resolution (1920 * 1080 @60 Hz) in the display settings. I did a nd restart read a lot about this, but I couldn't find a simple solution on how to add a resolution in the option if it is not found.

    hope you can help me configure the resolution to the required resolution.

    After a screen shows what display preferences for the external monitor

  • Monitor display is not properly in Windows XP sp3

    Original title: Windows xp sp3 does not properly

    Hello, I do not know if this issue belong to the material division of the forum. I have an old system who have windows xp sp3. It was working fine until week couple but after a few days when I switched it on the screen is not displayed correctly.

    All the colors randomly displays as a spot on the screen and the other letters in a sentence is missing. I tried in safe mode with just visible in debug mode, but it doesn't happen in the journal to the screen. I can not even reinstall windows xp. Now I'm not able to understand if it's the problem of the operating system or a malfunction of certain components of the computer. Please help me.

    Thanks in advance.

    Hello

    Method 1:

    I suggest you to start the computer using the VGA Mode.

    (a) restart the computer

    (b) press F8

    (c) in the start menu

    (d) choose the option

    (e) activate the VGA Mode

    This option starts Windows in mode 640 x 480 using the current video driver (not Vga.sys). This mode is useful if the display is configured to a setting that the monitor cannot display.

    Reference:

    To start the computer in safe mode

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Method 2:

    If you are able to start the computer using the VGA Mode, you can perform a system restore to the date where the computer worked well.

    How to restore Windows XP to a previous state

    http://support.Microsoft.com/kb/306084

    If you use system restore when the computer is in safe mode, you can't undo the restore operation. However, you can run System Restore again and choose a different restore point if any. You can also create Safe Mode system restore points. System Restore affects the Windows system files, programs and registry settings that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.

    If the problem persists, you may need to contact the manufacturer of the monitor to the stand.

  • 'Input not supported' with Acer AL2216W monitor

    I use Windows Vista Home Premium with Service Pack 2 in a system with an Intel D946GZIS motherboard and an ACER AL2216W LCD display panel. This system has worked well for over a year, but recently in a battle of two months with a problem of code 10, the screen would occasionally drain and display "Input not supported" in a small floating window. As a first step, start with F8 would allow the system to boot in a 640 x 480 window which would quickly find its native resolution of 1680 x 1050. But now it starts directly from the screen to 640 x 480 to the State banned in normal mode, make possible adjustments to display.

    I can still use this display Mode without failure, but find that Safe Mode display adjustments do not affect the display in normal mode. In addition, a panel of HDTV used as a monitor instead of the Acer works wonderfully in normal mode in 1920 x 1080, but display settings to a lower resolution made with it do not persist when Acer Board is restored. Finally, my system is no longer recognizes the Acer AL2216W, but use a "default monitor.instead." And I can not install the Acer in the Mode panel without failure!

    You can try to uninstall your display driver in Device Manager, then reboot. Check if the monitor is listed under Device Manager. Your monitor should be below or try to reinstall the driver using the procedure on the link in my first answer.

    You can then go to the support site for your computer manufacturer and download the latest display driver specific to your operating system. Look for instructions on how to uninstall previous drivers and install the latest driver.

  • HP L1906 monitor: HP_L1906 with Windows 10 display does not work

    Under Win7 Pro, I used two monitors, a DELL and HP L1906 (my favorite).  After the Win10 upgrade, the DELL works just fine.  The HP is not displayed.

    In the settings the LP is detected, but under the name generic and none of the parameters of work, nor can they be saved.  I tried swapping the connections, thinking maybe Valentine's video, but always ended up with the monitor DELL works, not HP.

    How can I make my HP L1906 monitor works with Windows 10?

    (pro 64-bit)

    Hello:

    See if the vista driver works...

    I compressed upwards and tied the monitor driver below.

    Download and unzip the drivers in their folder.  Don't do anything with the files in the folder.

    Go to the Device Manager, expand the category of device monitors.

    Click the generic monitor p & p.   Click the driver tab.  Click on set to update driver.

    Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

    Make sure that the include subfolders is selected and see if the pilot goes like this.

    Then restart.

  • I added third monitor display windows on it but the mouse is not going on the third screen

    I added third monitor display windows on it but the mouse is not going on the third screen

    Hello

    1. what operating system is installed on the computer?

    2. What is the brand and model of the computer?

    3. does the problem occur when you are working on a particular application?

    We will define the third monitor as primary monitor and check the functionality of the mouse.

    Link:

    http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=XT_Tjm0Ldrb

    Please return to the State of the question.

  • Monitor displays the frequency not supported

    work PC is windows 7 Enterprise

    I have a problem with the refresh before logon rate-

    I put my refresh at 60 hz, and once connected, everything is good)

    (I have several PC and use a KVM, the works of PC windows 7 very well once I'm connected, but sometimes the login screen reads the kvm evil and tries to go to a faster refresh.) Monitor says frequency not supported.)

    Where should I go to manually set the display at 60 hz for use before being connected.

    Hello

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the issue.

    I suggest you to refer to this article and check if it helps.

    Reference:

    Flicker of the correct monitor (refresh rate)
    http://Windows.Microsoft.com/en-us/Windows/correct-monitor-flicker-refresh-rate#1TC=Windows-7

    If this does not help, you can ask your question on the TechNet forums to get help.

    TechNet Forum
    https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

    I hope this information helps.

    Thank you

  • Extend the display does not - second black monitor

    I have a laptop Toshiba Satellite C655 and I connected a 2nd monitor in order to have two screens to work on.  The screen resolution is set to the optimum level for each monitor, I chose the option "Extend these screens" and each monitor is set to a different refresh rate.  However, the second monitor stays black.  If I click on "Identify", a number 1 appears on the screen of the computer, but nothing appears on the external monitor.  Even the mouse cursor does not appear when low-pressure on this screen. I checked for updated drivers, but Windows says I already installed the best drivers.

    If I go to "Duplicate the poster", the external monitor displays the desktop and the laptop screen is black.   I don't understand.  It was working fine yesterday, but today when I turned on, I'll have these problems.  I even tried plugging an external monitor that is completely different with the same results. Any help would be appreciated.

    I have a laptop Toshiba Satellite C655 and I connected a 2nd monitor in order to have two screens to work on.  The screen resolution is set to the optimum level for each monitor, I chose the option "Extend these screens" and each monitor is set to a different refresh rate.  However, the second monitor stays black.  If I click on "Identify", a number 1 appears on the screen of the computer, but nothing appears on the external monitor.  Even the mouse cursor does not appear when low-pressure on this screen. I checked for updated drivers, but Windows says I already installed the best drivers.

    If I go to "Duplicate the poster", the external monitor displays the desktop and the laptop screen is black.   I don't understand.  It was working fine yesterday, but today when I turned on, I'll have these problems.  I even tried plugging an external monitor that is completely different with the same results. Any help would be appreciated.

    Download (and install) the latest driver for all video player is installed in this laptop specific.  The manufacturer - not Microsoft.

  • Acer G246HL monitor (UM. FG6EE. B01) - screen Type

    Just installed acer G246HL monitor and cannot work my way through the display settings, I can get the menu but that's it, how to choose different settings?

    There should be buttons on the left of the switch (if not tactile, possibly sensitive to touch). It is without a doubt between a "right", "left", "menu", "entry", perhaps a few others. Menu course should open the menu (that you've probably discovered), while others (especially the left and right) can be used to navigate in the menu. It may take some experimenting (as all monitors seems slightly different), but it shouldn't be too hard. If all else fails, check the manual you should have received with the monitor - which should list the keys; where they are and what they do. And, just to make sure you know, you can use regular peripheral of entry (mouse, keyboard, etc.) to control the menu on screen.

  • NO SIGNAL alert QUICK / BLACK MONITOR Acer S242HL monitor

    • Acer S242HL monitor will light up and briefly displays "No Signal" before going black.
    • I plugged on the Dell PC (Windows 7 HP) with the Blue D - SUB cable, and both fittings are tight.
    • The new Acer monitor worked (connected to the computer of the store) when I bought it today.
    • The original Dell Monitor works fine, and I'm trying to use the Acer as a 2nd monitor.  When I try to set up my computer to use multiple monitors, the computer detects the 2nd monitor as "VGA display device.
    • (I have connected new Acer monitor to the PC with the DVI cable used on Dell monitor work, but the cord is all the points in the Center who gets taken them Acer DVI, so I'm not sure it's a good fit.)  It tightens, but still no signal.)

    What should I do?

    Easy solution - to a new power cord DVI.

  • I am running windows xp on a computer dell laptop and just bought an acer H213H-screen that does not work. __

    I am running windows xp on a computer dell laptop and just bought an acer H213H-screen that does not work.

    I downloaded the driver appropriate on the acer site and installed.  Also, I tried to reduce my resolution.  None of them have worked.  I get a message on the acer monitor that says "Input not supported"

    You check the display settings and make sure that you do not have your resolution to high for this monitor. Its got to many many times.
    Please rate me upward if you find my post helpful. Thank you!

  • Stopped monitors display on a single connection, but work on another

    Original title: several display issues

    I have a desktop 7 / and a laptop with vist.  Two weeks ago stopped office display on the monitor but still displays on HDMI.  This laptop stopped morning show on external vga, but still display on laptop screen.  Restored to the previous when date work but that hasn't helped.  Suggestions?

    Desktop computer is ASUS with dvi for fear that the age of a year, laptop is Toshiba 2 years with vga both works very well except for several monitor problems.  Seems like an update or something went wrong.  Office dvi start sceen for just a second and then goes black - light indicates the monitor is on.  When I click on identify on computer monitors second monitor is not displayed.

    First of all, I was wrong on laptop, it was bad connedtion.  Second of all, I unplugged DVI ASUS provided with office and connected Acer VGA monitor and it all works.  Cable VGA connected to the VGA on ASUS and it did not work.  I'll probably buy an ASUS to replace this one, so the next time I need something to throw against the wall I get it.  Problem solved.  Thanks for trying to help.

  • Cannot get my Acer X223W monitor widescreen (DVI + HDMI with adapter Apple) to show anything.

    Separated from this thread.

    Yes two years late.

    I went to the Acer site to try to find the updated drivers for my Acer x223w LCD monitor, but the only driver, they offered was for the 32-bit version of windows.  Where did you get the 64 bit version.

    I'm having a similar problem where the display does not indicate a signal from a DVI - D port on my motherboard (Asus Z97 Pro (wifi) with a processor of 4790 K with HD 4600 video intel).  However, it will be a 'Digital' signal when I connect it with the same cable to a passive adapter plugged into the display port.

    So I was looking for a solution to this strange cannot read a DVI - D signal for some reason any.  And Yes, all pilots are supposed to be updated.

    Hello

    Please contact Microsoft Community. I will surely help you this question.

    This problem could occur due to corrupted drivers.

    I suggest you to check with the Acer support, if they have a driver updated 64-bit for Windows 8.
    http://us.Acer.com/AC/en/us/content/service-contact

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

  • Pavilion a6528p: no monitor display

    I bought a new power supply for more tension and installed (plug connector had a 4 contacts more than the orginal but plugged Council ok) after having done that I did get no monitor display so I put power supply original back in and still nothing on the screen. Could I have burned something? Everything seems not start dvd, keyboard, and cooling fans just no display.

    Well I have the new power supply the value of lb/po2 and used bios graphics card dvi_d instead of the vga and this cable works thank you at all

  • Satellite 1110: Secondary display does not work

    I have a satellite 1110
    Connection of a monitor second - does not work
    The settings are correct in what, move your mouse off the screen of the laptop and he enters the secondary monitor - but this monitor is empty
    Tried all the normal things - control work? Yes etc.
    I'm running XP Professional could be corrupted or is it more likely to do with my laptop

    Please someone help - new monitor for Christmas - just can't make it work

    Thank you

    Hello Nick

    According to your description, you can't write that the second display doesn t work. Of course, you have activated the option called extend my Windows desktop on this monitor. In this case, you can remove all windows laptop for external monitor screen.

    If you work with more different windows on this way, your work will be more comfortable. I assume that you do want this and it will be interesting to know how you want to use the secondary display:
    -secondary display only
    -but both with the same point of view?

    Remove the scope option and use the FN + F5 key combination and choose display to use.

    Good bye

Maybe you are looking for

  • How do delet research falling down in firefox google

    When I go to firefox, the google search box, when I click in the search box, a list of previous searches goes down.How to delet the previous research?

  • Pavilion 15 p158sa: Incorrect warranty start date

    Like so many others on this forum, my new laptop HP Pavilion has bad warranty start date. The laptop was purchased only on 11 January 2015. However, the warranty start date is 11/10/2014. Of course, I'd like it corrected. Until someone asks. Yes I ca

  • Toshiba virtual Store account Reset - 20391

    Please reset my account number 20391. [email protected] Post edited by: ADMIN

  • Problem adding toolbars

    I'm moving to IE8, Firefox but get adding all toolbars that I use everyday to Firefox. I want to add Coupons.comCouponBar, Roboform (which he says has been added, but does not appear), Adobe CS3 contribute and Canon Easy Web Print EX (for my Canon MX

  • Pavilion G7 - 1368dx RAM upgrade - what should I expect?

    So, I've been looking around, but there is very little info on what type of RAM the Pavilion G7 1368dx supports. I saw an upgrade which was compatible to 1066 MHF, but I was wondering if I could go higher than that, somewhere close to 1300 mhz. Also,