Acer Iconia W700 - slight delay in contact after inactive for more than 5 seconds

I upgraded the OS 8 Win provided with the tablet to Win 8 Pro and since then, I have a slight delay in recognition touch screen after the Tablet is idle for more than 5 or more seconds. As a result, I have to type something twice before it responds. Once I spent idle time, touch works exactly as expected. It is only when there is no tactile activity for more than 5 seconds. It becomes a bit annoying when you play a game or navigate the web where you sit idle for a second, click on a link or an action and I must so he struck again because the contact does not save. I played around a lot with the operating system provided with the Tablet, so I cannot confirm if this happened before I upgraded to pro.

In addition, I have since 8 reloaded Win pro from scratch and there was no change. It seems almost that the tactile sensors screen go to sleep or something. Very strange.  Thoughts anyone?

Go to Device Manager, look for human interfaces, then change the two input USB device and uncheck the first line in the current tab.

Tags: Acer

Similar Questions

  • Incorrect SCXI all the playback channels after running for more than 30 minutes

    I have a SCXI-1001 module. I use a thermocouple module (1102, breakout box 1300), input analog (off 2, map of 1100, 1300 in small groups), analog output (1124 map, 1325 breakout) and a relay (card 1160, breakout 1324). I'm using labview 2009. I created my channels manually to read all channels, I need about 1 task for entries of thermocouple and analog, 1 analog and 1 for task task for the output relay (total 3 tasks). Each task comes into contact with the SCXI area in a different section of a timed sequence. I read all my channels with precision for 30 minutes but then all of a sudden they stop reading accurately and all thermocouples read the same incorrect value as well as all analog input channels. I can't change the output channels either.

    The problem occurs more quickly if I increase the clock frequency. There are no errors showing when this problem occurs.

    What is an interaction of hardware failure or a software.

    Any help would be greatly appreciated. I also need to resolve this issue quickly because it is delaying the test.

    Thanks for your help

    Tim

    Thank you all for your response. I managed to solve the problem. It was a problem with the start of the task and to connect the clocks for different tasks. I've included only a single task to start my unstable code in the source code as for posed multiple startup tasks. However, I started my slave tasks (analog and digital outputs) before starting my master's work (analougue entered). This seems to have solved the problem. I intend to go more far by adding clocks at 2 slave atsks and linking them to the task of master.

    I used the sequence as part of documentation. Each links to sequence number to another sheet that I have has a flowchart to say what is each part. As you say there is no need to put in a sequence and do so limit labviews own data stream. I'll remove the sequences and put my documentation on the codes in the code directly because it is made in the examples of labview.

    Thank you for your help

    Tim

  • The camera earthquake won't, Ive been using after effects for more than a year, perplexed absoloutley! Help

    OK, Exactley the description of what said...

    Ive been using AE for more than a year, but did not use wiggle cam because I was studying my course... I understand how it works I all click the stopwatch to null Position then wiggle (12.34) etc. (is that at the time?)

    But that when I RAM Preview does nothing nothing at all... I can't work on what could I possibly missed because Ive looked at a lot of tutorials and I do exactley what the guardian did but to no avail...

    SooOo bizzar and frustrated...

    IM thinking maybe something to do with information wiggle? or is it a lousy option I have to reset or something?

    Thank you!

    Do the film layer 3D. Problem should be solved. You have no 3D elements in the scene. The camera position has no effect on a 2D layer. It would also be useful if your null was 3D.

  • Acer Iconia W700 Wi - Fi problem

    Hello world

    Yesterday, I bought an Acer Iconia W700 Tablet and for some reason, the WiFi disconnets all the time. If I have the Tablet really close to the place of the wi - fi connection, it works fine but when I go into my living room, the internet disconnets or it was limited. Declinations thing I can do is open google and search for something. Internet hangs then...

    It's frustrating this situation... And I was wondering if I should return it or if there is anything I can do about it. I've seen also online users complain about the same problem...

    Thanks for the help!

    I would like to contribute to this topic.

    I tried the following steps which have solved the problem for me:

    Download the latest driver on the Acer's Support site.

    S ' Please make sure that the version of the Wirelesss Lan Driver download is: 10.0.0.217

    As this is a drop-down list dirver it will also improve the bluetooth to 8.0.0.214. Where the grand 220MB file size.

    -Go to control panel and delete the current WLAN + bluetooth drivers.

    -Once removed, you can go through and install the latest driver downloaded.

    -Restart the Tablet after installation

  • Manual keyboard Acer Iconia W700-6499

    My Acer Iconia W700-6499 came with an Acer toteable stand covered with leather with a built-in keyboard.  There is no paper or electronic manual covering this accessory.  I couldn't find one online.  The problem is that I would like to know how to engage the switch next to the battery lights on the keyboard.  There must be a way to turn it off, or just drains the battery internal when the Tablet is in the stand and not connected on the support in plastic.  someone had this problem?

    I found the "Acer keyboard case Addedum" document that accompanies my W700.  The case has the model # KT - 1252 and there are a few entries in the section Archives 2013 these discussion Forums.  I don't see a way to attach the document but may be able to copy / paste If someone is desperate.

  • Acer Aspire 5349 began to stop randomly, now can not stay on more than 2 seconds

    Hello world!

    I use my 5349 aspires for more than 4 years now running Windows 7. A few months ago, he began stopping at random - sometimes after an hour of work, other times - after 10-15 minutes.

    It is used mainly for light office work, but given his age, I decided it was due to the accumulation of dust or otherwise overheating due to thermal decomposition paste to the processor and the thermal pads - for the video chip. It is out of warranty, so I disasembled he replaced even if the thermal paste compound and the thermal pad seemed OK. There was no dust important problem as well, in any case seized the opportunity to thoroughly clean.

    After assembling and switching on, it ran stable for 3-4 hours which even helped me put upgraded to Windows 10 (32 bit). He rested for a few days due to the holidays here and then when turned on - again closed in about 10 minutes. After that no matter what I do - perform disassembly, check for loose contacts, CMOS battery, laptop battery, etc.-, he could not run for more than a few minutes from the Windows recovery and then stops again. In the last days it even can't stay for more than a few seconds before stopping again, so I can not even get into the BIOS.

    Laptop battery is good, because it has always been used as a desktop replacement, in all cases tried with battery and battery off nothing works. The power brick is one that came with it originally, even though it says LITEON instead of ACER. Tried another one with the same voltages and amps for an another ACER laptop - the situation didn't improve or change at all.

    Logically, I started reading here and discovered on exactly the same problems with other similar models, so I tried all the suggestions - replaced RAM, HDD, DVD, tried to boot from USB or DVD, tried to remove the build-up of electrostatic charges. I'm very suspicious of the latter, or any electrical problem / might like, because when I completelly demolish the mobile nut, i.e. by removing everything that can be removed and then back - it works for 10-15 minutes before closing.

    So, finally, the question is - is there suggestions that I could follow?

    The easy solution is to replace the MB in case it would help, or the completely portable, but I hate when I don't understand or diagnose a hardware problem and will make every effort to identify and resolve.

    See you soon!

    Google the keywords "5349" "mainboard" or "motherboard". Replacements to run $100 inc shipping, some on ebay U.S. and other China.

    Jack E/NJ

  • My account has been compromised once again. -Cannot recover after I send an email to technical support, has been blocked for more than a week.

    Blocked for more than a week, still no unlock after you follow each step the helpdesk had sent me. I have a lot of important emails in the compromised account, especially the email of my National Service Portal.

    Hello

    I'm sorry that you are having problems but the answers is a peer group supported
    and unfortunately has no real influence on Hotmail or Windows Live Mail - if the problem
    is one of these. If this is not the case, check with the help of the the email provider.

    HotMail has its own Forums, so you can ask your questions there.

    Windows Live Solution Center - HotMail - HotMail Forums Solutions
    http://windowslivehelp.com/

    Hotmail - Forums
    http://windowslivehelp.com/forums.aspx?ProductID=1

    Hotmail - Solutions
    http://windowslivehelp.com/solutions.aspx?ProductID=1

    How to contact Windows Live Hotmail Support
    http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

    Windows Live Hotmail Top issues and Support information
    http://support.Microsoft.com/kb/316659/en-us

    Compromised account - access unauthorized account - how to recover your account
    http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

    Hotmail hacked? Take these steps
    http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

    ============================

    Check with Windows Live Support and Forums

    Windows Live Mail Forums
    http://www.windowslivehelp.com/forums.aspx?ProductID=15

    Windows Live Solutions
    http://www.windowslivehelp.com/solutions.aspx?ProductID=15

    Windows Live Solution Center
    http://www.windowslivehelp.com/

    Compromised account - unauthorized account access
    http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

    I hope this helps.

  • Hi there - already I bought a month of adobe stock (10 pictures per month) and cancelled it after a month. The system is not offered this choice. Help, please. It meets my needs, I won't be frozen for more than a month. Thank you

    Hi there - already I bought a month of adobe stock (10 pictures per month) and cancelled it after a month. The system is not offered this choice. Help, please. It meets my needs, I won't be frozen for more than a month. Thanks Jo

    Hi Joanne,

    Do you mean that you're not seen the monthly plan? Can please sign in the stock site, go you to: plan pricing and membership Adobe Stock | Adobe Stock and send me a screenshot of what you see? This will help me to solve your problem.

    Thank you.

    EBQ

  • I subscribe to creative cloud for more than a year. I heard that after this year, I still want to be able to use the software. However, I would not be able to update until I subscribed again? What is its operation or? Thank you very much

    I subscribe to creative cloud for more than a year. I heard that after this year, I still want to be able to use the software. However, I would not be able to update until I subscribed again? What is its operation or? Thanks a lot now have a load of files I can not settle before I send them to the clients until I have shut down my business. Can anyone throw any light on the matter please?

    If you do not renew your subscription, you will have 30 days to use the programs as tests... and then they stop working

    A subscription is like rent a car... stop paying, and you stop driving

  • Acer Iconia W700 - abgesicherter Modus mit netzwertreiber details

    Hallo miteinander,

    habe versucht mein Iconia w700 mit win 10 in den abgesicherten Modus zu bringen. Damit war ich been, aber wie kann ich jetzt oEST Tastatur of Bluetooth USB Tastatur oder die treffen Punkt 4 im abges unter selection. Modus -Abgesicherter Modus mit Netzwertreibern - auszuwahlen of the F4 oder Punkt 4 antippen ist leider erfolglos.

    There're eine combination mit dem Laut - Steckel set an der Seite zu scrollen, oder die Bildschirmtastatur zu aktiviern?

    Ware as eure Hilfe very thankful.

    Grüße aus Landshut

    Hallo,

    Hello im laufenden the opportunity das Kontextmenü of Startbuttons aufzurufen und sleeps unter "Implement" msconfig Windows einzugeben.

    Dann As of unter dem Reiter 'Start' the den abgesicherten Start auszuwahlen und "Netzwerk" auszuwahlen opportunity:

    BEI einem Neustart bootet das Gerät dann direkt in den Mode safe mit Netzwerktreibern.

    ICH habe das selbst evil far, bei einem 10th switch, bei dem die Tastatur defekt war.

    Warnung! :

    Result war, dass das Gerät im abgesicherten Modus bis zum login screen hochfuhr und ich dann feststellen would, dass weder Touchscreen, noch Bildschirmtastatur funktionierten; are war also was clear more possible!

    ICH konnte dann nur durch das gleichzeitige press von (I think) Windows und Aus taste taste

    year der Seite in die Reparaturumgebung Windows back and would von tablets sleeps aus Windows neu installieren (es gab keinen Wiederherstellungspunkt).

    ICH weiss nicht, ob die deaktivierte Touchscreenfunktion das Standardverhalten tablets von im abgesicherten Modus ist, habe auch im Web nichts dazu found.

    Grave of ja, solltest dringend die finger davon lassen!

    Gruss

    Jochen

  • Acer Iconia W700 white strip

    Dear community!

    I have a problem with my Acer Icona W700. If I connect (then only) is always displayed a white band in the middle of the tablet. It's like a mirror! Take a look at the photo...

    I've tried everything (3 different versions of Windows, the latest drivers etc...).

    All tips for me?

    Just for the record: I'm from the Switzerland... Sorry for my bad English. I hope understand you willl

    Hmm... I think I might have solved the problem...

    I had not tried to install it in UEFI mode, I did and now it works like a charm, not screenproblems! (for now at least - fingers crossed!)

    I used these two instructions:

    http://www.eightforums.com/tutorials/15458-UEFI-bootable-USB-flash-drive-create-Windows.html

    http://www.eightforums.com/tutorials/2328-UEFI-Unified-Extensible-Firmware-Interface-install-Windows...

    And now it seems to work! I'm a happy camper once again!

    / Martin Dahm

  • My iPod stop now, it won't turn even after be plugged into the power supply for more than an hour

    IiPod touch than 64 GB itself now cut an hour plug into the current af it starts

    Press the sleep/wake and home buttons and keep them for at least 10 seconds.

    If this is not enough, take a look at these articles Support from Apple:

    If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

    Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

    More info here:https://support.apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • After using XP pro for more than five years, got a message "Not authentic".

    I had a store of the local computer to build my computer with Vista pro more than 5 1/2 years ago. Vista is is crushed so often that a few months later I had to remove it and install my old XP pro trustworthy. It worked without problem for the last 5 years and now I get the message not real like few others I've seen on this website. Unfortunately, I can't find my old drive (real) XP pro and the calendar is not good to reformat my drive right now since I'm in the middle of a project. Is there a solution to this problem? I've never had any problems with my old XP pro on old computer and do not know why this is happening now after 5 years of use contiguous. I appreciate your comments.

    Read the following article.  It is possible that this is your problem:

    "Windows XP on computers can be marked as not authentic when incorrect."
    or the corrupted data.dat file is present.
      <>http://support.Microsoft.com/kb/926333 >

    HTH,
    JW

  • ACER ICONIA W700

    I recently bought a W700 Iconia, and no matter what I do, I can't figure out how to get my internal microphone to work. I searched every possible site and video I could find, and have not been able to find a solution that works. I tried setting, Control Panel, you name it. I tried. I really need to solve this problem, someone here has a solution? I also tried to search the forums here, but absolutely nothing. The internal MIC does not work, and to my knowledge it is not even in the list of the audio recording devices... Thanks for any help you can give me.

    Hello

    I could see that you have tried many things to fix the problem, but when you said there is no found recording device. I suggest you contact Acer for warranty repair

  • Acer Iconia W700 case cable keyboard and fresh

    Hi all

    We bought a package in the paperwork for the keyboard, and dock/keyboard W700 renovated last year he mentions a USB to micro USB.  It seems that he should have the cable but nothing was in the box.

    If Yes, then I will contact Acer factory made and ask for one that we have no way to load the keyboard except with one of our phone charger cables (pull the plug of the CA).

    see you soon

    Peter

    Yes, mine came with a white USB/micro USB cable for short (12 inches).

Maybe you are looking for

  • HP Elitebook 820 G3: What size of SIM card

    My new Elitebook 820 G3 has a slot for SIM card on the RIGHT side. I tried on a size full card SIM inside, but the slot is too small. What size SIM card is supposed to fit into this slot machine?

  • I want to improve my Compaq cq58

    Hi all I would like to uograde my compaq cq58 - product C2B16EA #ABU number I want my microprocessor uograde AMD APU E1-1200 with graphics card HD Radeon (TM) to something much better. any recommendations? or even if I can do this? laptop is real slo

  • Satellite L30 will not recognize battery

    Hi guys Having a problem with my battery. The battery itself is not so old and works in another machine. My current L30 for some reason any will not recognize the battery. When the captain came out of the computer does not use the battery. It sometim

  • screen size and screen fonts changed... I want to go back to the original

    The size of my screen and the police has expanded on its own.  How can I get this back to the way it was?

  • Wireless Vista SP2 issues

    First, I installed SP2 for Vista x 64 may 27 by a wired LAN connection. This night there I couldn't connect wirelessly to the internet at the hotel. Checked for problems with the ISP and none have been detected. The next day I uninstalled SP2 and the