Acer Liquid E2 DUO; need to re - enter the PIN code / unlock SIM occasionally

Similar Questions

• BlackBerry Smartphones BB Torch. Enter the PIN code, but only the available numbers and the alpha code.

  My wife phone-work requires a PIN entered to unlock the device.

  The PIN is a combination of 4 letters, but it can be understood as only the numeric keypad of the keyboard and virtual work.

  I searched for a way to move digital alphabet, but no dice.

  I am therefore asking for help.

  Newbie to BB.

  SOLVED.

  Because he was only nums that I tried the pin of the sim, who worked with God like I should only test left.

  Sorry for such a fool.

  Thanks again mate.

• BlackBerry smartphone how to enter my PIN code?

  I just changed on my brand new 9000 "BOLD". The first thing I'm being prompted to enter is to enter my PIN code in 3 tests. I have 2 left.

  I guess that's the PIN that came with the BB and not the SIM card pin, right? (1)

  I'm new to BB and unfamiliar with the keyboard. My main concern is to know how to switch between letters and numbers? (2)

  There is a '123' in the upper right corner of the screen, which I think shows the num lock mode. According to the "Getting Started Guide" by pressing the 'alt' should turn on lock num - but not on my BB mode, at least not not before entering the PIN code.

  How can I get the unit off NumLock mode? (3)

  .. and when I get out of lock mode number, which must be pressed to enter a number, the 'alt' or the 'sym '? (4)

  Press the 'alt' or 'sym' must be held down while pressing the number key or does it just to push first? (5)

  Thanx, Jesper

  Hey. Thanks for the reply.

  I understand it now, but I got a SIM card locked in the process :-)

  First, it was of course the SIM card pin code and not the BB pin code which is asked to enter. The misfortune is that you can't control your device at all until you enter the right pin only 3 attempts. This means that you need to understand how the use of the aerodrome of keys works on this neverseen before keyboard the first time you use it. There is no help, and you don't see what you write, because it is simply displayed as *. In addition to that, you sit down with this new cool device and you're really impatient. It took me 10 minutes to lock the card!

  5 minutes later with another sim card, I learned that I had to just press the [sym] open a graphics pad with which easily enter you the digital PIN using the trackball.

  I wish that this was mentioned in the "Start Guide".

  Cheers, Jesper

• Problem blackBerry Smartphones enter the PIN for first use

  Hello, everyone,

  I just got a Blackberry Curve 9300 and tries to start with her... The first step is to enter the PIN, which I assume is the PIN in the box. It is a code of 8 characters, alphanumeric characters. When I try to enter the PIN code, the field accepts only 7 characters. In addition, because the PIN is hidden when it is typed, I can't verify the characters that I'm going home.

  The web pages without no doubt useful and demos on the site of Blackberry are gone for this model, I get a "404 page not found" message.

  Any advice will be most appreciated!

  Thank you

  Margaret Doyle

  Ditto what jamead said: If you or your company has a safety on the SIM lock, then the PIN will be required at startup.

• Acer Liquid E2 Duo: Problem of storage. How?

  Hello

  I have a storage problem on my Acer Liquid E2 Duo. Because of my previous phone experience that I thought 4 GB internal memory was enough, but it's not good I moved all the applications that I could to the SD card.

  Here's what I see in 'Settings'-> 'storage '.

  1. Storage internal-> size-> free 50 MB 2.35 GB
  2. -> Card SD size 32 GB-> GB of free 22
  3. Storage-> phone size 1.6 GB-> GB 1.6 free

  If "Internal storage" + 'Phone storage' are by default 4 GB to come with the phone.
  But obviously NO application go to the "storage of phone" so I run out of space in "internal memory". Why?

  In addition many to come with the OS ' default ' apps (and that I do NOT like Facebook, etc...) are not INSTALLABLE (I tried it only turn them off) and no MOBILE SD card (option is grayed out).

  So in summary: I have run out of space in "Internal memory" with many not removable applications and while the 'storage phone' is not used, I have plenty of space on the SD card but I can not move the default applications default on that...

  If anyone has the answers...
  THX
  T.

  Hi all, for some time now, I've provided workaround for this "storage solution" issued by PM and Acer have been generous enough to allow me to do.

  However, things got a lot better now and I am extremely grateful to Acer that will allow me to send a link to workaround and make it a sticky so that nobody has to PM me longer for it.

  Acer will add their own words at this, but let me say that although the 'process/script"is very well written (ahem!), it is not for novices and you will need to understand some parts of your phone, along the TSF, some may be new terminology and jargon.

  And of course, it is at your own risk. You decide for yourself the positive feedback in this thread about whether it is worth to continue. That being said, here is the link to my instructions as to how you can repartition the storage:

  Link to instructions contained in a zip file with two files

  Once again, thanks to Acer to enable this.

• Card sim on the ACER liquid Gallant Duo E350

  Hello, the East I would like to know what type of SIM on the ACER liquid Gallant Duo E350

  I change my plan and my new operator me format a reclamo, I pose the question because the mobile is in command and sector of not in my.

  Thank you for your help.

  Hello, Hello,

  The format of the SIM on the ACER liquid Gallant Duo E350 is "2FF".

  The SIM on the E350 card form factor is "2FF".

  Best regards, thank you

• I need to reinstall a clean vista 32-bit, but after you have entered the activation code I get the error from a previous version of windows

  Because the two system restore points are corrupt, I need to reinstall vista, but I get an error message using the previous operating system after I entered the activation code, is there a work around? (lost in moving to the new apt disk backup)

  Hello

  you sitting not what type of disc you are using

  you start from the DVD drive to do a clean install

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and read this too

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  and here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

• cq57: need help cq57 enter the password administrator or power on password... deisabled system 58555314

  need help cq57 enter the password administrator or power on password... deisabled system 58555314

  Thank you!!!

  @clatimer

  Enter 47433930

  REO

• Windows needs administrator rights to enter the PUK code number

  Hello

  in the company I currently work for, many users use a laptop with a mobile connection to connect to the internet.

  It sometimes happens that the user has entered the wrong PIN code several times, so Windows needs the PUK code to unlock the SIM card.

  Windows 7 (and Windows 8 also) administrator rights are needed to enter the PUK code.

  Laptop users don't usually have local administrative rights, so internally, IT needs to enter the PUK code.

  Why is it necessary to have administrative rights to enter the PUK code?

  A possible solution would be to remove the SIM card from the laptop and insert it into a mobile phone. Currently not possible, because the mobile phone requires a SIM nano and the laptop on a mini SIM card. We would therefore order to new nano sim cards and buy a lot of cards. It should work, but I would prefer a software solution.

  See you soon

  Dieter Schmitz

  Dieter

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• I try to install photoshop elements 14. In order to get the serial number, I need to enter the redemption code. But it keep saying the redemption code I entered is incorrect.

  I try to install photoshop elements 14. In order to get the serial number, I need to enter the redemption code. But it keep saying the redemption code I entered is incorrect.

  Hello

  Would you share your redemption code in private message please?

  Or

  Please contact Adobe customer care http://helpx.adobe.com/contact.html

  • Be sure to stay signed on the page with your Adobe ID.
  • Select your product and what you need help with
  • Click on the blue box "still need help? Contact us. "

  Kind regards

  Sandrine

• Terminal to request access code specific app on my iMac OS 10.10 not able to enter the access code

  How to use app-specific code for an OS 10.10 application authentication

  Terminal to request access code specific app on my iMac OS 10.10 not able to enter the access code

  Charles Clark wrote:

  How to use app-specific code for an OS 10.10 application authentication

  You need to say more. Terminal usually wants your admin psswd.

  psswd in terminal will not resonate.

• I bought 6 of Lightroom, but when trying to get the serial number by entering the redemption code, Lightroom download creative cloud.  How can I get rid of the cc, get my serial number and get 6 Lightroom?

  I bought Lightroom 6 (for $149.00 at Staples).  I followed the instructions to redeem my serial number.  After you enter the redemption code, I got the message of a serial number was unnecessary and I could download.  I clicked on download.  Downloaded creative cloud.  (after hours).  I don't want the creative Cloud version, I want to stand alone.  How can I get rid of the CC and get what I paid for?

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• Enter the activation code in a free trial of Captivate 8

  I downloaded the free trial version, then bought 8 Captivate.  All my published works saying they will expire when the trial expires, so it is obvious that my Captivate is not updated.  How can I enter the activation code?

  Help--> Activate should do just fine. For what anyone in addition, you will need to provide information on the system and any other technical details, you still haven't doen.

  Mylenium

• How to enter a postal code that box after having entered the zip code it will redirect you the...

  How create a postcode enter box after entering the zip code, it will redirect to the link given but will the zipcode entered with her? It's maybe a stupid question, but I need to know. Thank you

  > Probably that.

  >

  >... onfocus = "if (this.value ==' #-#') ' this.value =" "onblur =' if (this.value ==") ' this.value =' #-#' "/ >"

  >

  >

  > - could be better!

  Yes!

• Why can't I enter the country code of my phone number for the 2-step verification process?

  I just upgrade my iPhone 6 to 10.0.2. In the home screen, you asked me to provide my phone number to register in the system of validation in 2 steps. However, + 82 (South Korea) is not on your scrolling list.

  https://www.YouTube.com/watch?v=aPFbPt3KGqY

  Hey aramkim80,

  I see from your post that you are not able to enter the country code for the South Korea when setting up for your Apple ID security two-step verification of your Apple ID as much as possible is always a good thing, so I understand your concern.

  Take a look at this article: frequently asked questions about two steps checking of Apple ID. This article presents a list of countries is available in two-step verification. I do not see the Korea of the South on the list of countries currently supported, it's why you're not able to do this.

  Hope that answered this question for you.

  See you soon.