Acer Predator G3-710 map mother size!

Similar Questions

• Acer Predator G3-710 GTX 1070 overheating

  Hey guys

  So I have an acer Predator G3-710

  • Intel Core i5-6400
  • 8 GB RAM
  • GTX 1070

  But it keeps overheating when im playing games on ultra high heat. And since there were "IceTunnel thermal system" theres no fans in the enclosure.

  A fan will simply solve this problem? The poor obvisoly can't get enough air. So her dosent system thermal iceTunnel seem to work now

  If the case has a place to install a fan, you can buy a fan that uses a molex connector for power.  But it will be always on except if you buy one with an on/off switch.  Temp could lower a bit.

  Try to use the Geforce experience to optimize your game settings.

• Acer Predator G3-710

  Acer Predator G-710 I9820

  Where can I find the documentation on the ports and connectors on the back? (Manual UM_1.0_En.pdf is not detailed enough)

  Starting on the top (back side)

  -Port HMDI, but covered with a plastic?

  -Port DP with removable plastic (ok)

  -several USB ports and audio (ok)

  -Geforce GTX960: 1 white DVI port, marked 1 (DVI-I dual link?), HMDI port and 1 DP

  -geforce GTX960 below: 1 black port marked 2 (DVI - D dual link?)

  Rgds

  Hi ddh43,

  You probably just ask a specific question to be better results from the community.

  The first ports are usually covered because everyone understands that the video card should be used and they will plug the video ports of motherboard and have less experience.

  The GTX960 takes two slots, so you should have 2 DVI, 1DP, 1HDMI in this configuration.

  Cory

• Acer Predator G6-710 BSOD works well after the connection, but...

  Hi I'm new to the forum.  My question is that if someone else got some error checking to restart error and if so, how to solve it.  I'll share the info I get from Whocrashed from the dmp files.  I am running windows 10.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------- Crash dump directory: C:\WINDOWS\Minidump

  Dumps are enabled on your computer.

  Tuesday, October 4, 2016 05:25:53 GMT crashed your computer
  crash dump file: C:\WINDOWS\Minidump\100416-3984-01.dmp
  This was probably caused by the following module: iccwdt.sys (ICCWDT + 0 x 7838)
  Bugcheck code: 0xD1 (0xFFFFF80746167838, 0xFFFFF80746167838, 0x2, 0 x 8)
  Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
  file path: C:\WINDOWS\system32\drivers\iccwdt.sys
  product: driver Intel® Watchdog Timer (Intel (r) WDT)
  company: Intel Corporation
  Description: driver Intel® Watchdog Timer (Intel (r) WDT)
  Bug control description: This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: iccwdt.sys (driver Intel® Watchdog Timer (Intel (r) WDT), Intel Corporation).
  Google search: Intel Corporation DRIVER_IRQL_NOT_LESS_OR_EQUAL

  I can't connect to my desktop and everything works normally.  But when I leave my computer alone, if I run a game or not, and no one touches, it displays a blue screen with the error above.  Does anyone have a solution?

  OK, but a week later the same problem occurred.  This time I retried the search google for anything whatsoever.  I managed to find the message with a driver who has a problem of "overclocking".  I went to the Acer website and went to the drivers.  I thought I had them all, but I missed the chipset driver.  Now, I got the BSOD when I updated and since then, I have not had a crash.  I hope that this help anyone having the same problem.  And thank you to everyone who has helped too.

• Power supply Acer predator G6-710

  Hello

  can someone tell me if the power supply in this office has 2 power connectors 8 pin pci-e?

  THX and greetings

  Yes, the power supply has two sets of connectors for video cards that should work for you:

  1 PS cable has
  2x6pin
  1x2pin

  2nd PS cable
  2x6pin
  1x2pin

• Acer Aspire T3-710 upgraded gpu

  Hi all

  I recently bought the computer desktop Acer Aspire T3 - 710 (form below), however, I need to update the graphics card and it seems that there is enough space to fit this card Nvidia GTX 750 ti. The current map graphic is a Nvidia gtx 745 (OEM) (Plug here). This current card is a single location that I want is double slot (there are 4 unique locations on the back plate) it seems pretty great, but I'm not sure.

  Anyone has any advice on the upgrade of this card? Or better yet the GPU, which fit the T3-710? My current diet is only 220w so I know I need to upgrade it too, but I don't want to until I have a graphics card I know will fit.

  My current desktop features;

  10 64-bit Windows Home

  Intel Core i7 @ 3.40 GHz Skylake 14nm 6700

  16 GB of Dual-Channel DDR3 RAM

  Card mother Acer Aspire T3-710 (U3E1)

  4 GB NVIDIA GeForce GTX 745

  3 TB drive HARD 5400 RPM

  220w PSU

  Thanks for any help.

  Hi neewu

  I also recently bought this pc and immediately updated to a unit of evga 600w power supply to install a decent gpu. As it is the best gpu you could go with this prebuilt is a 750ti. The issue is not only with the PSU, but the length of the card itself. There is only 1 PCI slot on the motherboard and there are connections of power directly behind the video card apparently preventing one more card of 6.5 inches or more should be installed. From what I understand, it would be useful to upgrade the power supply that I have and go for a GTX 960 mini or mini 970. If someone has updated the gpu on this pc that I would also be interested to know what suits. I ordered a mini 970 and will display the results when it arrives

• Gel with my Acer predator g3-605

  Hello

  First of all, I would say I'm sorry for my bad English because it is not my mother tongue.

  So here's my problem: since I bought my acer predator g3-605 I gel on it when I play games.

  I searched and found that I am not the only one having these gel but none of the solutions helped me.

  I tried a lot of solutions such as:

  • Update the drivers via Geforce experience
  • Uninstall/reinstall applications/games that freeze
  • Move the games/applications on the disk HARD or, on the contrary, to the SSD.
  • Factory (!) "restart" at the beginning

  I found a similar post of my friends on this forum, but the only solution for him was to send his pc to replace it with another computer, and I'd found a solution without changing my PC.

  With our thanks,

  I think your motherboard is faulty. I suggest you contact your Acer support.

  Sorry I can't help you more.

• Acer Aspire T3 - 710

  Hi all

  I was wondering how to activate the turbo boost function of the CPU (max speed of 3.4 Ghz, with Turbo Boost 4.0 Ghz) with its acer aspire model;

  10 64-bit Windows Home

  Intel Core i7 @ 3.40 GHz Skylake 6700

  16 GB of Dual-Channel DDR3 RAM

  Card mother Acer Aspire T3-710 (U3E1)

  4 GB NVIDIA GeForce GTX 745

  3 TB drive HARD 5400 RPM

  220w PSU

  Or is it automatic?

  Thanks for your help.

  It's automatic

• Acer Predator 17 SSD G9-792-75ZT error

  Hi everyone I recently bought an acer predator 17 in one of the local stores from the Philippines last October 5, 2016. Overall, the quality is excellent and it works what is said. I have some of my favorite and need games apps installed in the computer, but after that, the system keeps on crashing. I tried to restore from the previous version until it becomes completely unaccesible.

  I tried to run the reset in the system recovery but the samsung mzvpv256hdgl-00000 256 gb SSD was locked. I tried to remove the volume completely and reinstall the partition. He worked a few times, but it's really unacessible even after that. I tried to copy some files, reinstall windows, but it says incorrect function. I can't open the disc itself, because of the warranty.

  I also noticed that after anything in the ssd, it will disappear causing my laptop to slow down. the news of controller and lun was also is not found even in the "diskpart" command What do you think is the cause and the solution to this?

  Symptoms:

  1. the material can be recognized in the bios (inconsistent).

  2 do you have a reformat using the administrative tools

  3 reset the bios AHCI, RAID and LEGACY UEFI

  4. the path of the controller is not located (value 0)

  5. currently installed windows hard disk

  6. After reformatting or copy a file, the hard drive no longer not recognized except restart.

  7. I just installed vlc, DBMS, sibelius, steam and dota 2 once it crashed.

  8. currently, SSD is completely reformatted but still can not 'normally' access'

  9 used dedicated nvme samsung for SM951 driver, but still the same thing

  I currently work as sailor so coming back to the manufacturer is not easy. Is it possible that they can change the right ssd if the found it defective? I mean in this day there also because given the nature of my work. We do not stay in a country long.

  Thanks for all those who who' the response. Good day.

  This is a strange behavior.

  I suggest that you contact Acer Center support in your area from your laptop of predator is under warranty as you said that you just bought. You must contact them to find out how long it would take to repair or where bring or send the laptop.

  http://www.Acer.com/AC/en/pH/content/service-contact

• Acer Predator G9-792-77 K 4 issue

  Hello!

  I really need help guys (I would like a response from acer)

  I'm having some problems with Acer Predator G9-792-77 K 4

  In Windows 10 when I press the icon for notifications and try to activate Tablet he mode or bluetooth and I move my mouse to this button... .can be seen a mouse lag... I tried to watch a youtube video, and while I watch, to press them... and video accuses even.

  I know it's not important, but this mouse lag which makes some of my games freeze randomly.

  I sent the laptop to Acer serving, but they have not found something... they just changed to SSD, but that has not solved the problem.

  As if I disable Intel HD 530 or Nvidia gtx 970 m from the Device Manager, I saw this thing does not happen.

  So I tried to find the other drivers but was useless.

  So... is a hardware, drivers or Windows 10 problem?

  Sorry for the bad English.

  Thank you!

  I think at this point, it is best to contact Acer customer service again.

  If you want to try one last thing, Device Manager, uninstall the Intel HD530 device and choose to uninstall the software too, reboot and let windows to re - install the driver.

• Acer Predator Scorpius keyboard

  First of all, if this is in the wrong forum, go to the correct forum.

  I've seen this keyboard in a store display:

  

  The store did not offer this keyboard for sale, nor couldn't I actually find them online. It of just a product sent demo out yet and not available for purchase or can I simply cannot find any info on this subject?

  Here is the back:

  

  Thanks in advance.

  Hello

  After some research, I finally found the keyboard. It comes with Predator G1 - 710 (US model).

  According to your information, the part number is:

• adding ram to the Acer Predator AG3-605-UR1D

  I recently bought Acer Predator AG3-605-UR1D.

  I was wondering if its possible to add an another ram (MemoryStick) inside. I know how to do this, I wanted to just make sure that the pc would leave me without breaking something.

  
  

• Nine Acer Predator G3-605 starts windows 8

  Hello.
  I got my Acer Predator G3 605 last week, but the system was slow.
  So I decided to put my SSD OCZ Agility 120 GB 2 expansion slot and instal windows drive there.
  As a first step, it starts up fine and work fast. I installed all the updates and soft, reboot several times and no problems.
  After I put everything I have delete the windows HARD disk partition. Then system stop when windows starts.

  So far, I tried this:
  1. several resettlement on the SSD and HDD image or clean install.
  2. all the BIOS for SECURE BOOT settings (on/stop/standard/custom/key on / key removed) and CSM.
  3. I connect only SSD or HDD only and do recover or new installation.
  4 delete all partitions and recover / clean installation.
  5. update of the BIOS/SSD firmware
  6 recovery discs acer does not help. Even that resetting the BIOS.

  Nothing helps. He works until the 'Configuration' window material and after the reboot that it stuck.
  No idea what can be wrong and how to fix it?
  I do not know more
  Thanks for any help.

  I finally found a solution by myself, so I'll post my solution here in case someone will have the same problem.
  It works for me, can't promise it will work for everyone.

  My step by step solution:
  1. I created WindowsToGo on my USB with this statement:
  http://www.TomsHardware.co.UK/FAQ/ID-1867613/create-Windows-drive-Windows-enterprise.html
  2. from Acer Support I have download all the latest drivers for my Acer Predator G3 605 and extract everything to a special folder on my USB key
  3. I disconnect my HDD SATA cable drive (there is still no connected SSD)
  4. in the bios I have disable startup secure, activate the start menu and CSM always turn on
  5. After restart I press F12 and the start menu, I selected my USB with WinToGo
  6. once my Windows go hardware and post installation preparation I finally see the start menu.
  7. the first thing to do was connect my HDD SATA cable so windows automatically detects the drive
  8. I open prompt by admin, type diskpart, and then list disk, my HARD drive has disk 0 so I type select disk 0, then clean type
  9. I have installed all the drivers for my Acer and restart
  10 after restarting, I go to my pre downloaded BIOS updated and open the app updated
  11 choose ROM file, choose update all (not only part of pre selected), then click FLASH
  12 reboot, unplug my USB and put it in my installation USB Windows 8 key (DVD can also be used)
  13. from Windows install go to advance the installation and choose the HARD drive (in this point installation program said that cannot be installed on this drive as bios don't have drivers, but I could still create partition, so I did two create and click Next)
  14. After all server files have been copied computer auto restart
  15 Windows 8 shows the information for the preparation of the devices (it was the last part of work for me before, cuz after computer restart blocked)
  16. after restarting Windows boot and go to the Customization screen. Everything works.

  I have to keep secure boot off and CSM on yet.

  [spelling corrected for disc]

• GTX660 in Acer Predator AG3620-UR308 'no signal '?

  Hello

  I bought an Acer Predator AG3620 UR308...

  I removed the gt 630 and replaced with an ASUS GTX600-DC2-2GD5

  the computer turns on but there is no signal hdmi to TV

  I reinserted the gt 630 and everything worked fine...

  I disabled startup secure... uninstalled UEFI gt 630 drivers

  disc 660 GTX would not go without the card inserted

  I have inserted the 660 GTX, it is directed light works... the fans are running

  always 'no signal' the HDMI to the tv sharp... help?

  what I am doing wrong?

  Hello, the solution is

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/27071/~/how-to-enable-or-disable-secure-boot

  disable secure boot and allow launch MSC

• Acer Predator 17 G9-791-73 CL - no boot device error

  Hi guys,.

  My laptop is an Acer Predator 17

  i76700HQ 2.6

  16 GB OF RAM

  GTX 980M 4 GB

  Basically, the new update for windows 10 destroyed my files, nothing did not work properly, I tried to reboot to a restore point that I created (he has not worked as the girls were damaged) I tried to reset, (same thing damaged files) I tried practically all the existing troubleshooting options (F8) but also to reset the default bios (F2) , I unplugged the hard drive, put it back again, nothing worked so I installed windows from a USB pendrive of freeOS, I removed both of C(main one) D (second) partitions and created new ones and I installed the windows, I lie down, installed all the apps and everything was working fine, until I decided to update the BIOS/Firmware with those specified to install for my model of laptop computer on the site Acer

  BIOS	Acer	1. update of the Micro code 2. Version of update ME	1.10	4.3 MB	12/04/2016
  BIOS	Acer	Fixed not able to enter the BIOS configuration without optical media player utility in the [...]	1.06	4.6 MB	11/12/2015

  The thing is, I installed the new BIOS on UEFI mode and legacy not I don't know if that makes a difference or not, but when the computer laptop restarded, error - no. Bootable Device appears on the screen all of a sudden and it does not further than that, start one and I know not what to do about this I ran tests of hard drive and it works very well, the thing is I am currently on a legacy (in bios) mode and it works very well, I had to change to access my laptop, but the (UEFI mode) does not work for some reason itt continues to show no boot device and I don't know why I tried to reinstall windows again and delete the partitions, but F8 doesn't work on UEFI mode

  Any ideas on what I should do?

  Also, when I try to install new BIOS, I get the error: the version of the ROM file is not newer than the BIOS.

  I'm so stuck right now, this is my first posting of time on a forum for help with a laptop and I got computers/laptops for fifteen years, because I don't want to buy another hard... I tried something on the internet and I can't seem to make it work.

  This guy, I really appreciate your help, thank you

  for UEFI boot, windows must be installed under UEFI not inherited, because there need an EFI partition and the Manager start windows.

  So if you want to UEFI, you must reinstall windows.

  do not forget to support bootable USB of re - install windows (under settings of UEFI) must be UEFI compatible, I strongly suggest to use Rufus to create:

  https://Rufus.AKEO.IE/?locale=en_US

  define Rufus as the screen on the home page.