Acer Predator G6 rumble lights do not work?

Similar Questions

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• the ink lights does not work

  Product name: Deskjet 2050 All - in - one J510a

  Copy in black ink not working, warning lights did not show (and never did).

  Product name: Deskjet 2050 All - in - one J510a

  Operating system: Windows 8, 64 bits

  Copy and printing in black ink do not work.  No light warning flashing on the printer.

  Via the computer, I get the black ink levels (bowtie symbol?) is ok, but less than 25%.

  The cartridge ink levels color is close to zero, it is said.  How ever, when copying, the color works nice

  but printing in black ink does not at all.

  I tried to clean the inkheads twice.

  Should I replace both cartridges?

  Why don't show the printer ink level lights?

  Why computer don't warn me about low ink levels?

  Hi @malin_t,

  Welcome to the HP Forums!

  I understand that the ink lights do not work and you cannot print in black with your HP Deskjet 2050, and I'm happy to help you!

  If you have tried everything in this guide, solve the problems of quality Print to the HP Deskjet 1050, 1050 A, 2050 and 2050 all-in - One Printer Series. Then I would definitely consider replacing both cartridges.

  About the ink levels, there should be an icon of HP printer on your desktop. Double-click it to open it, click the picture of the level of ink in the HP Solution Center, and then click the advance tab Setiings, here you can choose if you want alerts of ink to showed immediately or only when you print.

  

  Hope this information helps and have a great day!

• Alienware Aurora ALX lights does not work master of e/s part #.

  I tried to get the lights on my Alienware Aurora ALX job. The only lights that works are the head alien and the flange. Work, I mean that they are white. When I Command Center, it doesn't even show fan/readings of temperature or light speeds. I think that my I/o card is bad.

  I can not get something to change in Comand Center.

  I tried all the solutions on the forums and nothing seems to work.

  I reinstalled windows 3 times. Nothing.

  I reinstalled Alienware Command Center 6 times (correct version and the different)

  I tried shutting down the computer, unplug the power cord and hold the power button for 1-2 minutes thing, didn't work.

  I went to reset the map using the Green rider, did not work.

  I ran a diagnosis and everything seems fine, don't know if it's testing the Master Control I/O Board.

  I'll order an Alienware Aurora ALX Alien FX / Master Control I/O Board, because I am sure that my i/o board is bad.

  The reference is 02JXP2 and version 1.1 mine said A02

  The white mark on my map of IO said A02, but it has the same part number 02JXP2 and version 1.1.

  My question is can I use a Board with the same part number but it says A04?

  Here is a picture of the map of IO with the A02, I want to buy a economy part number 02JXP2 and at the bottom says A04 instead, but is a version 1.1.

  

  If anyone as any advice before ordering the card / advice to see if I can get the lights work on my computer?

  ThatOne_Gamer

  I don't have the cable that connects the motherboard to the MIO card.

  I'm sure that's why my ect lights do not work.

  Right... If it is not connected, it cannot work.

• My Acer TravelMate 3273WXMi audio service does not work properly. I use an Audio_Realtek_6.0.1.5413_VistaX86

  Hello
  My Acer TravelMate 3273WXMi audio service does not work properly. I use an Audio_Realtek_6.0.1.5413_VistaX86 on W7 driver. The problem is no outside speaker and not micro.

  2 things:

  -Why you are using Vista drivers with W7? No, there is no specific driver for W7 (search the website of Acer support for your machine).
  -you will never get full nombreauses for help, these drivers.
  See you soon,.
  Jerry

• Lighting effects not working not properly

  Hello

  I am new to the forum and would like some advice as to why my light do not work on CC. The effect does not appear to occur when I clicked OK. So I can't see what is happening and can not change the size or terms of the circles, they also appear only when I left click and then disappear again. He does not do what it is in the tutorials I watch.

  I followed some advice and updated my drivers, went into preferences and performance and found that the CL has not been highlighted so cannot select. Check also that I am 8-bit.

  I am quite new to this, so don't know if I'm missing something. I use this on a Samsung notebook Pc, 1 year and a half old.

  Any help would be greatly appreciated,

  Thank you

  JO

  Try resetting your Photoshop preferences. For 2015 of CC:

  It helped me when I was not able to adjust the handles on the circle.

  

• Camileo h10 flash or movie light does not work

  Hey,.
  Does anyone have any ideas as to why flash does not work on my h1o camileo camcorder. ? or the pilot light.

  Thank you

  Neil

  Please help somebdoy!...

• Acer Aspire ES1 - 311 touchpad does not work

  Hello world. I bought my Aspire ES1-311 just a weeks and I re-installed Windows 8.1 but the touchpad does not work. I tried to activate it with "Fn + F7" without success, I installed the drivers touchpad (on the official Acer site download page). The installer said that everything is ok, but still does not. In the configuration menu of Windows 8.1 mouse (Control Panel), Synaptics menu does not appear. On my Ubuntu disbrution, touchpad works fine without any driver. How can I fix? Thank you and happy new year

  Hello, I had the same problem I solved. Difficulty as follows: 1 Reset 2. Press F2 to enter the BIOS 3. Hand 4. define touchpad as basic (No. AHEAD!). All others should be defined as anable in hand 5. Press F10 to save the changes, I hope that this sequence to solve your problems

• Acer Windows 7 upgrade kit does NOT work!

  Hi I have an Acer Aspire 5538 (4 GB of RAM and 220 GB of memory) I'm trying to upgrade to Windows (vista and both are family premium). I read elsewhere on the site that someone had the same problem as me and earasing everything on computer seemed to have worked according to your suggestions (so I did and put everything on my USB). Later, I used the "dics ghost" factory, which deletes the database from the computer to the factory settings. So I'm trying to upgrade and the first CD has worked well "Acer upgrade disc. Now, when I put in the second one it says that my pc is not compatible, and that my pc must be x 86 (32-bit) or x 64 (64-bit). I went into the "system information", and it clearly states "x 86 based PC" until I do?. The second disk named: "Windows 7 upgrade media" does not work!

  Even I am confused. Tell you what, download Windows 7 Home Premium. ISO image, burn it to a blank DVD and use your product key to install and activate it.

  Windows 7 Edition Home Premium x 64 (64-bit)

  English: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  Download and install burn ISO Gear (free):
  http://www.GearSoftware.com/gear-ISO-burn.php

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

  ------------------------------------------------------

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the system drive, click on remove (DO NOT remove the recovery when it exists)

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

• G6 laptop Touchpad No Light & does not work

  Hi This is my first post

  I searched the rest of the forum before making this post and tried all the other suggestions without success

  Information System

  Laptop HP Pavilion G6

  #ABU product number A5H09EA

  Serial number 5CD14477ZK

  64-bit version of Windows 7

  Problem

  When windows starts on the touchpad light is not lit.  It is not turned on and does not turn on the use of the method 'double tap' in the upper left of the touchpad or the small circular ' indentation.

  Since it stopped working I updated the drivers for the touchpad, and no change happened

  Sometimes the 'right click' and works of drop-down list button and the menu appears, but no other function works.

  Sometimes the touchpad works for a short period, but it is "intermittent" and slow and unresponsive.

  Any help you could provide would be appreciated

  Hello

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53851.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Tap here to f10 as soon as you press the power button to enter the menu of the bios.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  When windows has reloaded, see if now hold the fn key and pressing the SPACEBAR will illuminate the TouchPad.

  There are also other configurable options here.

  Kind regards

  DP - K

• Light does not work well on my Satellite A660

  Hello

  I have a problem with my Toshiba Satellite A660. The brightness of my screen does not work well, when I try to increase the brightness, it goes down, I mean is dimmed.
  I try to reinstall the drivers, but continue it problem. Anyone know what I could do?
  Thank you very much

  Stand by. I put t know how you try to change the brightness of your screen, but I would like to know if this work when you use FN + F6/F7 or when you change the level of brightness in power intend that you use (power options).

  Are you using the original pre-installed OS that you got with your laptop or your own installation of the OS?

• Buttons for the S60 menu light does not work

  Hi all

  On Lenovo S60 menu button illumination does not work. Is this normal and supposed to be like this, or it's some sort of bug?

  Thank you!

  S60 is not backlit on the recent button, home and back.

  Thank you.

• Graphics ATI catalyst on Acer aspire timeline 3820 tg - does not work on windows 8 (HDMI does not work)

  I have trouble with my ATI catalyst on win 8 HDMI does not work, and I am not able to download/find the right driver

  The Aspire 3820TG don't figure on our page Windows 8 Upgrade offer.

  Therefore, we do not provide drivers of Windows 8 for this system.

  You can try to find the drivers of Windows 8 on AMD Support site.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• Satellite A300: Light does not work after installing Win 7

  Hello

  I've recently updated my notebook from windows vista to windows 7.
  My touch buttons work perfectly and the light up for a second when I touch them.

  Only, I can not find how do I turn on the lights of the touch buttons all the time.
  Sombody can you please tell me how to do this.

  Thank you

  Hello

  Have you installed the additional package of value VAP for Win 7?

  Value added package controls Toshiba command buttons and this will help you solve your problem

  In addition, you must know that you can turn on and off lighting in the BIOS.

  Check too!

• Acer Aspire 2920 Crystal Eye webcam not working not not after installing updates

  After automatic update of my computer service pact 2 now my webcam shows that it is not connected when try to connect the cam... want to advise... TKS.

  Original title: Crystal Eye of Acer Aspire 2920

  Hi Kegankh,

  I suggest you to uninstall and reinstall the drivers for your Acer Aspire 2920 Crystal Eye and check if it helps to get the webcam working.

  To uninstall the drivers of Webcam and software programs and features, follow the steps below:

  1. Click Start.
  2. In the start search box, type programs and features.
  3. In the list, click on programs and features.
  4. Check the webcam software and uninstall it.
  5. Restart the computer.

  During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

  a. Click Start.

  b. access control panel > system > hardware > Device Manager.

  c. open Device Manager and expand the imaging device.

  d. right-click on the webcam device installed and uninstall the device.

  During the uninstallation of the device, make sure that you place a tick against 'delete the driver for this device '.

  Restart the computer and install the latest version of the drivers of webcam and check if it works very well.

  Here is the link for Acer Aspire 2920 Crystal Eye drivers:

  Drivers for Acer Aspire 2920 Crystal Eye

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.